HC2_G11.prg
INFO
| Field | Value |
|---|---|
| ECU | HeadingControl (Spurwechselwarnung) |
| ORIGIN | BMW EF-631 Patrick_Nüdling |
| REVISION | 2.003 |
| AUTHOR | Delphi - DePlonty, BMW EF-631 Bajfus |
| COMMENT | - |
| PACKAGE | 1.90 |
| SPRACHE | deutsch |
Jobs
Index
- INFO - Information SGBD
- INITIALISIERUNG - Initialisierung und Kommunikationsparameter
- IDENT - Identdaten UDS : $22 ReadDataByIdentifier UDS : $F150 Sub-Parameter SGBD-Index Modus: Default
- FS_LESEN - Fehlerspeicher lesen (alle Fehler / Ort und Art) UDS : $19 ReadDTCInformation UDS : $02 ReadDTCByStatusMask UDS : $0C StatusMask (Bit2, Bit3) Modus: Default
- FS_LESEN_DETAIL - Fehlerspeicher lesen (einzelner Fehler / Ort und Art) UDS : $19 ReadDTCInformation UDS : $04 reportDTCSnapshotRecordByDTCNumber UDS : $06 reportDTCExtendedDataRecordByDTCNumber UDS : $09 reportSeverityInformationOfDTC Modus: Default
- FS_LOESCHEN - Fehlerspeicher loeschen UDS : $14 ClearDiagnosticInformation UDS : $FF DTCHighByte UDS : $FF DTCMiddleByte UDS : $FF DTCLowByte Modus: Default
- PRUEFSTEMPEL_LESEN - Auslesen des Pruefstempels UDS : $22 ReadDataByIdentifier UDS : $1000 TestStamp Modus: Default
- PRUEFSTEMPEL_SCHREIBEN - Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden. UDS : $2E WriteDataByIdentifier UDS : $1000 TestStamp Modus: Default
- SVK_LESEN - Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $F1xx Sub-Parameter fuer SVK UDS : $F101 SVK_AKTUELL (Default) Modus: Default
- STATUS_LESEN - Lesen eines oder mehrerer Stati UDS : $22 ReadDataByIdentifier
- STEUERN - Vorgeben eines Status UDS : $2E WriteDataByIdentifier
- SERIENNUMMER_LESEN - Seriennummer des Steuergeraets UDS : $22 ReadDataByIdentifier UDS : $F18C Sub-Parameter ECUSerialNumber Modus: Default
- STEUERN_ROUTINE - Vorgeben eines Status UDS : $31 RoutineControl
- FS_SPERREN - Sperren bzw. Freigeben des Fehlerspeichers UDS : $85 ControlDTCSetting UDS : $?? Sperren ($02) / Freigabe ($01) Modus: Default
- IS_LESEN - Sekundaerer Fehlerspeicher lesen (alle Fehler / Ort und Art) UDS : $22 ReadDataByIdentifierRequestServiceID UDS : $2000 DataIdentifier sekundaerer Fehlerspeicher Modus: Default
- IS_LESEN_DETAIL - sekundären Fehlerspeicher lesen (Info-Meldungen / Ort und Art) UDS : $22 ReadDataByIdentifier UDS : $20 dataIdentifier UDS : $00 alle Info-Meldungen anschließend UDS : $20 dataIdentifier UDS : $nn Details zur Info-Meldung an der Position n Modus: Default
- IS_LOESCHEN - Infospeicher loeschen UDS : $31 RoutineControl UDS : $01 startRoutine UDS : $0F06 ClearSecondaryDTCMemory Modus: Default
- HERSTELLINFO_LESEN - Lieferant und Herstelldatum lesen UDS : $22 ReadDataByIdentifier UDS : $F18A SystemSupplierIdentifier UDS : $F18B ECUManufactoringData Modus: Default
- DIAGNOSE_AUFRECHT - Diagnosemode des SG aufrecht erhalten UDS : $3E TesterPresent UDS : $?0 suppressPosRspMsgIndication Modus: Default
- DIAGNOSE_MODE - SG in bestimmten Diagnosemode bringen UDS : $10 StartDiagnosticSession Modus: einstellbar mit diesem Job
- SLEEP_MODE - SG in Sleep-Mode versetzen UDS : $11 ECUReset UDS : $04 EnableRapidPowerShutDown Modus: Default
- ENERGIESPARMODE - Einstellen des Energiesparmodes UDS : $31 RoutineControlRequestServiceID UDS : $01 startRoutine UDS : $0F0C DataIdentifier ControlEnergySavingMode UDS : $?? Mode Modus : Default
- STATUS_ENERGIESPARMODE - Energy-Saving-Mode auslesen UDS : $22 ReadDataByIdentifier UDS : $100A DataIdentifier EnergySavingMode Modus: Default
- STATUS_BETRIEBSMODE - Aktueller Betriebsmode SG muss sich im Energiersparmode befinden UDS : $22 ReadDataByIdentifier UDS : $100E Sub-Parameter Betriebsmode Modus: Default
- STEUERN_BETRIEBSMODE - Betriebsmode setzen SG muss sich im Energiersparmode befinden UDS : $31 RoutineControl UDS : $01 startRoutine UDS : $1003 DataIdentifier Betriebsmode UDS : $0? Betriebsmode Modus: Default
- STEUERGERAETE_RESET - Harter Reset des Steuergeraets UDS : $11 EcuReset UDS : $01 HardReset Modus: Default
- STATUS_ROE_REPORT - Abfrage Status der Aktivierung der aktiven Fehlermeldung UDS: $86 ResponseOnEvent $04 report activated events $02 eventWindowTime - infinite (LH Diagnosemaster V11 oder höher, Umsetzung nach LH V6 - V10 wird jedoch toleriert)
- STEUERN_ROE_PERSISTENT_STOP - Persistentes Deaktivieren der aktiven Fehlermeldung an den Diagnosemaster ueber TAS UDS : $86 ResponseOnEvent $40 Stop persistent $02 (EventWindowTime) gültig für LH Diagnosemaster V6 - V12 (Stand 2013)
- STEUERN_ROE_PERSISTENT_START - Persistentes Aktivieren der aktiven Fehlermeldung an den Diagnosemaster ueber TAS UDS : $86 ResponseOnEvent $45 Start persistent $02 (EventWindowTime) gültig für LH Diagnosemaster V6 - V12 (Stand 2013)
- CPS_LESEN - Codierpruefstempel lesen UDS : $22 ReadDataByIdentifier UDS : $37FE DataIdentifier Codierpruefstempel Modus: Default
- STATUS_SVK_SLAVE_FL - Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $401A SVK_AKTUELL (Default) Modus: Default
- STATUS_SVK_SLAVE_FR - Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $4019 SVK_AKTUELL (Default) Modus: Default
- STATUS_SVK_SLAVE_RL - Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $4018 SVK_AKTUELL (Default) Modus: Default
- SENSOREN_IDENT_LESEN_HC2 - This routine blabbla
INFO
Information SGBD
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ECU | string | Steuergerät im Klartext |
| ORIGIN | string | Steuergeräte-Verantwortlicher |
| REVISION | string | Versions-Nummer |
| AUTHOR | string | Namen aller Autoren |
| COMMENT | string | wichtige Hinweise |
| PACKAGE | string | Include-Paket-Nummer |
| SPRACHE | string | deutsch, english |
INITIALISIERUNG
Initialisierung und Kommunikationsparameter
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| DONE | int | 1, wenn Okay |
IDENT
Identdaten UDS : $22 ReadDataByIdentifier UDS : $F150 Sub-Parameter SGBD-Index Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ID_SG_ADR | long | Steuergeraeteadresse |
| ID_SGBD_INDEX | long | Index zur Erkennung der SG-Variante |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
FS_LESEN
Fehlerspeicher lesen (alle Fehler / Ort und Art) UDS : $19 ReadDTCInformation UDS : $02 ReadDTCByStatusMask UDS : $0C StatusMask (Bit2, Bit3) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| FEHLER_KLASSE | string | 'IGNORIERE_EREIGNIS_DTC': Wenn EREIGNIS_DTC = '1', DTC-Fehlereinträge werden ignoriert sonst: FEHLERKLASSE wird ausgewertet |
Results
| Name | Type | Comment |
|---|---|---|
| F_VERSION | int | Typ des Fehlerspeichers Fuer UDS immer 3 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_EREIGNIS_DTC | int | 0: DTC kein Ereignis DTC 1: DTC ist Ereignis DTC -1: wird nicht unterstuetzt table FOrtTexte EREIGNIS_DTC |
| F_FEHLERKLASSE | unsigned long | table FOrtTexte FEHLERKLASSE |
| F_STATUSBYTE | int | Wert des DTC-Statusbyte laut ISO 14229 (bitcodiert) Bedeutung der einzelnen Bits: Bit 7: warningIndicatorRequested Bit 6: testNotCompletedThisOperationCycle Bit 5: testFailedSinceLastClear Bit 4: testNotCompletedSinceLastClear Bit 3: ConfirmedDTC Bit 2: PendingDTC Bit 1: testFailedThisOperationCycle Bit 0: testFailed |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
FS_LESEN_DETAIL
Fehlerspeicher lesen (einzelner Fehler / Ort und Art) UDS : $19 ReadDTCInformation UDS : $04 reportDTCSnapshotRecordByDTCNumber UDS : $06 reportDTCExtendedDataRecordByDTCNumber UDS : $09 reportSeverityInformationOfDTC Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | long | gewaehlter Fehlercode |
Results
| Name | Type | Comment |
|---|---|---|
| F_VERSION | int | Typ des Fehlerspeichers Fuer UDS immer 3 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_EREIGNIS_DTC | int | 0: DTC kein Ereignis DTC 1: DTC ist Ereignis DTC table FOrtTexte EREIGNIS_DTC |
| F_STATUSBYTE | int | Wert des DTC-Statusbyte laut ISO 14229 (bitcodiert) Bedeutung der einzelnen Bits: Bit 7: warningIndicatorRequested Bit 6: testNotCompletedThisOperationCycle Bit 5: testFailedSinceLastClear Bit 4: testNotCompletedSinceLastClear Bit 3: ConfirmedDTC Bit 2: PendingDTC Bit 1: testFailedThisOperationCycle Bit 0: testFailed |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_HFK | int | Haeufigkeitszaehler als Zahl Wertebereich 0 - 255 Bei mehr als 255 bleibt Zaehler stehen. Kein Ueberlauf |
| F_HLZ | int | Heilungsszaehler als Zahl Wertebereich 0 - 255 -1: ohne Heilungsszaehler |
| F_UEBERLAUF | int | 0: Kein Ueberlauf des Fehlerspeichers 1: Ueberlauf des Fehlerspeichers |
| F_FEHLERKLASSE_NR | int | 0: Keine Fehlerklasse verfuegbar 1: Ueberpruefung bei naechstem Werkstattbesuch 2: Ueberpruefung bei naechstem Halt 4: Ueberpruefung sofort erforderlich ! |
| F_FEHLERKLASSE_TEXT | string | Ausgabe der Fehlerklasse als Text table Fehlerklasse TEXT |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen Je nach dieser Anzahl i (i = 1, 2, ...) existieren i mal folgende Results: (long) F_UWi_NR Index der i. Umweltbedingung (string) F_UWi_TEXT Text zur i. Umweltbedingung (real) F_Uwi_WERT Wert der i. Umweltbedingung (string) F_UWi_EINH Einheit der i. Umweltbedingung |
| F_UW_KM | long | Umweltbedingung Kilometerstand (3 Byte) Wertebereich: 0 - 16777215 km -1, wenn Kilometerstand nicht zur Verfuegung steht |
| F_UW_ZEIT | long | Umweltbedingung Absolute Zeit (4 Byte) Genauigkeit: in Sekunden -1, wenn Absolute Zeit nicht zur Verfuegung steht |
| F_UW_BN | int | Umweltbedingung Basisnetz (1 Byte) -1, wenn Daten bzgl. Basisnetz nicht zur Verfuegung stehen |
| F_UW_TN | long | Umweltbedingung Teilnetz (3 Byte) -1, wenn Daten bzgl. funktionalem Teilnetz nicht zur Verfuegung stehen |
| F_SAE_CODE | unsigned int | Wertebereich 0x000000 - 0xFFFFFF externe Tabelle T_SCOD |
| F_SAE_CODE_STRING | string | 5 stelliger Text in der Form 'Sxxxx' |
| F_SAE_CODE_TEXT | string | Text zu F_SAE_CODE |
| _RESPONSE_SNAPSHOT | binary | Hex-Antwort von SG |
| _RESPONSE_EXTENDED_DATA | binary | Hex-Antwort von SG |
| _RESPONSE_SEVERITY | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
FS_LOESCHEN
Fehlerspeicher loeschen UDS : $14 ClearDiagnosticInformation UDS : $FF DTCHighByte UDS : $FF DTCMiddleByte UDS : $FF DTCLowByte Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | long | 0x??????: Angabe eines einzelnen Fehlers Default: 0xFFFFFF: alle Fehler |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
PRUEFSTEMPEL_LESEN
Auslesen des Pruefstempels UDS : $22 ReadDataByIdentifier UDS : $1000 TestStamp Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| BYTE1 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
PRUEFSTEMPEL_SCHREIBEN
Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden. UDS : $2E WriteDataByIdentifier UDS : $1000 TestStamp Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | Bereich: 0-255 bzw. 0x00-0xFF |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
SVK_LESEN
Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $F1xx Sub-Parameter fuer SVK UDS : $F101 SVK_AKTUELL (Default) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SVK | string | table SVK_ID BEZEICHNUNG WERT default SVK_AKTUELL |
Results
| Name | Type | Comment |
|---|---|---|
| PROG_TEST | int | Programmierabhaengigkeiten (ProgrammingDependenciesChecked) 1: IO : Signaturpruefung und ProgrammingDependenciesCheck erfolgreich 2: NIO: mindestens eine SWE fehlerhaft oder ProgrammingDependenciesCheck nicht durchgefuehrt 3: NIO: mindestens eine SWE passt nicht mit einer HWE zusammen 4: NIO: mindestens eine SWE passt nicht mit einer anderen SWE zusammen sonst: reserviert |
| ANZAHL_EINHEITEN | int | Anzahl der xWEn |
| PROG_DATUM | string | Programmierdatum (DD.MM.YY) |
| PROG_KM | long | KM-Stand bei Programmierung (10 KM bis 655350 KM) Inkrement sind 10 KM -1: KM-Stand wird nicht unterstuetzt |
| PROZESSKLASSE_WERT | int | table Prozessklassen WERT dezimale Angabe der Prozessklasse |
| PROZESSKLASSE_TEXT | string | table Prozessklassen BEZEICHNUNG Text-Angabe der Prozessklasse |
| PROZESSKLASSE_KURZTEXT | string | table Prozessklassen PROZESSKLASSE Text-Angabe des Prozessklassenkurztextes |
| SGBM_IDENTIFIER | string | Angabe SGBM-ID der Prozessklasse |
| VERSION | string | Angabe der Version der Prozessklasse |
| SGBM_ID | string | Angabe von Prozessklasse, SGBM-Identifier, Version |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_LESEN
Lesen eines oder mehrerer Stati UDS : $22 ReadDataByIdentifier
Arguments
| Name | Type | Comment |
|---|---|---|
| ARGUMENT_SPALTE | string | 'ARG', 'ID', 'LABEL' |
| STATUS | string | Es muss mindestens ein Argument übergeben werden Es wird das zugehörige result erzeugt table SG_Funktionen ARG ID RESULTNAME RES_TABELLE ARG_TABELLE |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Antwort von SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERN
Vorgeben eines Status UDS : $2E WriteDataByIdentifier
Arguments
| Name | Type | Comment |
|---|---|---|
| ARGUMENT_SPALTE | string | 'ARG', 'ID', 'LABEL' |
| STATUS | string | Siehe table SG_Funktionen ARG ID LABEL ARG_TABELLE |
| WERT | string | Es muss mindestens ein Argument übergeben werden Argumente siehe table SG_Funktionen ARG ID ARG_TABELLE |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Antwort von SG |
| _RESPONSE | binary | Hex-Antwort von SG |
SERIENNUMMER_LESEN
Seriennummer des Steuergeraets UDS : $22 ReadDataByIdentifier UDS : $F18C Sub-Parameter ECUSerialNumber Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| SERIENNUMMER | string | Seriennummer des Steuergeraets |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERN_ROUTINE
Vorgeben eines Status UDS : $31 RoutineControl
Arguments
| Name | Type | Comment |
|---|---|---|
| ARGUMENT_SPALTE | string | 'ARG', 'ID', 'LABEL' |
| STATUS | string | Siehe table SG_Funktionen ARG ID RES_TABELLE ARG_TABELLE |
| STEUERPARAMETER | string | 'STR' = startRoutine 'STPR' = stopRoutine 'RRR' = requestRoutineResults |
| WERT | string | Argumente siehe table SG_Funktionen ARG_TABELLE |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Antwort von SG |
| _RESPONSE | binary | Hex-Antwort von SG |
FS_SPERREN
Sperren bzw. Freigeben des Fehlerspeichers UDS : $85 ControlDTCSetting UDS : $?? Sperren ($02) / Freigabe ($01) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SPERREN | string | "ja" -> Fehlerspeicher sperren "nein" -> Fehlerspeicher freigeben table DigitalArgument TEXT Default: "ja" |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
IS_LESEN
Sekundaerer Fehlerspeicher lesen (alle Fehler / Ort und Art) UDS : $22 ReadDataByIdentifierRequestServiceID UDS : $2000 DataIdentifier sekundaerer Fehlerspeicher Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| F_VERSION | int | Typ des Fehlerspeichers Fuer UDS immer 3 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_EREIGNIS_DTC | int | 0: DTC kein Ereignis DTC 1: DTC ist Ereignis DTC table FOrtTexte EREIGNIS_DTC |
| F_STATUSBYTE | int | Wert des DTC-Statusbyte laut ISO 14229 (bitcodiert) Bedeutung der einzelnen Bits: Bit 7: warningIndicatorRequested Bit 6: testNotCompletedThisOperationCycle Bit 5: testFailedSinceLastClear Bit 4: testNotCompletedSinceLastClear Bit 3: ConfirmedDTC Bit 2: PendingDTC Bit 1: testFailedThisOperationCycle Bit 0: testFailed |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
IS_LESEN_DETAIL
sekundären Fehlerspeicher lesen (Info-Meldungen / Ort und Art) UDS : $22 ReadDataByIdentifier UDS : $20 dataIdentifier UDS : $00 alle Info-Meldungen anschließend UDS : $20 dataIdentifier UDS : $nn Details zur Info-Meldung an der Position n Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | long | gewaehlter Infocode Wenn dieser Parameter angegeben wird, wird die Position automatisch ermittelt. Es darf dann nicht argument F_POS angegeben werden |
| F_POS | int | gewaehlter Eintrag Wenn dieser Parameter angegeben wird, wird die Position benutzt. Wertebereich 1 - 255 Es darf dann nicht argument F_CODE angegeben werden |
Results
| Name | Type | Comment |
|---|---|---|
| F_VERSION | int | Typ des Fehlerspeichers Fuer UDS immer 3 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_EREIGNIS_DTC | int | 0: DTC kein Ereignis DTC 1: DTC ist Ereignis DTC table FOrtTexte EREIGNIS_DTC |
| F_STATUSBYTE | int | Wert des DTC-Statusbyte laut ISO 14229 (bitcodiert) Bedeutung der einzelnen Bits: Bit 7: warningIndicatorRequested Bit 6: testNotCompletedThisOperationCycle Bit 5: testFailedSinceLastClear Bit 4: testNotCompletedSinceLastClear Bit 3: ConfirmedDTC Bit 2: PendingDTC Bit 1: testFailedThisOperationCycle Bit 0: testFailed |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_HFK | int | Haeufigkeitszaehler als Zahl Wertebereich 0 - 255 Bei mehr als 255 bleibt Zaehler stehen. Kein Ueberlauf |
| F_HLZ | int | Heilungsszaehler als Zahl Wertebereich 0 - 255 -1: ohne Heilungsszaehler |
| F_UEBERLAUF | int | 0: Kein Ueberlauf des Fehlerspeichers 1: Ueberlauf des Fehlerspeichers |
| F_FEHLERKLASSE_NR | int | 0: Keine Fehlerklasse verfuegbar 1: Ueberpruefung bei naechstem Werkstattbesuch 2: Ueberpruefung bei naechstem Halt 4: Ueberpruefung sofort erforderlich ! |
| F_FEHLERKLASSE_TEXT | string | Ausgabe der Fehlerklasse als Text table Fehlerklasse TEXT |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen Je nach dieser Anzahl i (i = 1, 2, ...) existieren i mal folgende Results: (long) F_UWi_NR Index der i. Umweltbedingung (string) F_UWi_TEXT Text zur i. Umweltbedingung (real) F_Uwi_WERT Wert der i. Umweltbedingung (string) F_UWi_EINH Einheit der i. Umweltbedingung |
| F_UW_KM | long | Umweltbedingung Kilometerstand (3 Byte) Wertebereich: 0 - 16777215 km -1, wenn Kilometerstand nicht zur Verfuegung steht |
| F_UW_ZEIT | long | Umweltbedingung Absolute Zeit (4 Byte) Genauigkeit: in Sekunden -1, wenn Absolute Zeit nicht zur Verfuegung steht |
| F_UW_BN | int | Umweltbedingung Basisnetz (1 Byte) -1, wenn Daten bzgl. Basisnetz nicht zur Verfuegung stehen |
| F_UW_TN | long | Umweltbedingung Teilnetz (3 Byte) -1, wenn Daten bzgl. funktionalem Teilnetz nicht zur Verfuegung stehen |
| F_SAE_CODE | unsigned int | Wertebereich 0x000000 - 0xFFFFFF externe Tabelle T_SCOD |
| F_SAE_CODE_STRING | string | 5 stelliger Text in der Form 'Sxxxx' |
| F_SAE_CODE_TEXT | string | Text zu F_SAE_CODE |
| _RESPONSE_2000 | binary | Hex-Antwort von SG |
| _RESPONSE_200X | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
IS_LOESCHEN
Infospeicher loeschen UDS : $31 RoutineControl UDS : $01 startRoutine UDS : $0F06 ClearSecondaryDTCMemory Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
HERSTELLINFO_LESEN
Lieferant und Herstelldatum lesen UDS : $22 ReadDataByIdentifier UDS : $F18A SystemSupplierIdentifier UDS : $F18B ECUManufactoringData Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ID_LIEF_NR | long | Lieferantennummer 0xFFFFFF, falls nicht vorhanden |
| ID_LIEF_TEXT | string | Text zu ID_LIEF_NR table Lieferanten LIEF_TEXT unbekannter Hersteller, falls nicht vorhanden |
| ID_DATUM | string | Herstelldatum (DD.MM.YY) |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
| _REQUEST_2 | binary | Hex-Auftrag an SG |
| _RESPONSE_2 | binary | Hex-Antwort von SG |
DIAGNOSE_AUFRECHT
Diagnosemode des SG aufrecht erhalten UDS : $3E TesterPresent UDS : $?0 suppressPosRspMsgIndication Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SG_ANTWORT | string | "ja" -> SG soll antworten "nein" -> SG soll nicht antworten table DigitalArgument TEXT Default: SG soll antworten |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
DIAGNOSE_MODE
SG in bestimmten Diagnosemode bringen UDS : $10 StartDiagnosticSession Modus: einstellbar mit diesem Job
Arguments
| Name | Type | Comment |
|---|---|---|
| MODE | string | gewuenschter Diagnose-Modus table DiagMode MODE MODE_TEXT Defaultwert: DEFAULT (DefaultMode) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
SLEEP_MODE
SG in Sleep-Mode versetzen UDS : $11 ECUReset UDS : $04 EnableRapidPowerShutDown Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
ENERGIESPARMODE
Einstellen des Energiesparmodes UDS : $31 RoutineControlRequestServiceID UDS : $01 startRoutine UDS : $0F0C DataIdentifier ControlEnergySavingMode UDS : $?? Mode Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| MODE | int | 0x00: Normalmode 0x01: Fertigungsmode 0x02: Transportmode 0x03: Flashmode |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_ENERGIESPARMODE
Energy-Saving-Mode auslesen UDS : $22 ReadDataByIdentifier UDS : $100A DataIdentifier EnergySavingMode Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ENERGIESPARMODE_WERT | int | Ausgabe des Energiesparmodes 0: Kein Energiesparmode gesetzt 1: Produktionsmode gesetzt 2: Transportmode gesetzt 3: Flashmode gesetzt -1: Mode ungueltig |
| STAT_ENERGIESPARMODE_TEXT | string | Text zu STAT_ENERGIESPARMODE_WERT |
| STAT_PRODUKTIONSMODE_EIN | int | 0: Produktionsmode nicht aktiv 1: Produktionsmode aktiv |
| STAT_TRANSPORTMODE_EIN | int | 0: Transportmode nicht aktiv 1: Transportmode aktiv |
| STAT_FLASHMODE_EIN | int | 0: Flashmode nicht aktiv 1: Flashmode aktiv |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_BETRIEBSMODE
Aktueller Betriebsmode SG muss sich im Energiersparmode befinden UDS : $22 ReadDataByIdentifier UDS : $100E Sub-Parameter Betriebsmode Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_BETRIEBSMODE_WERT | int | Aktueller Betriebsmode table Betriebsmode WERT 0 : Kein Betriebsmode gesetzt 1 - 16: Erweiterter Betriebsmode (Bedeutung siehe Tabelle) |
| STAT_BETRIEBSMODE_TEXT | string | Textausgabe STAT_BETRIEBSMODE_WERT table Betriebsmode TEXT |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERN_BETRIEBSMODE
Betriebsmode setzen SG muss sich im Energiersparmode befinden UDS : $31 RoutineControl UDS : $01 startRoutine UDS : $1003 DataIdentifier Betriebsmode UDS : $0? Betriebsmode Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BETRIEBSMODE | int | Betriebsmode setzen table Betriebsmode WERT 0 : Kein Betriebsmode gesetzt 1 - 16: Erweiterter Betriebsmode (Bedeutung siehe Tabelle) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERGERAETE_RESET
Harter Reset des Steuergeraets UDS : $11 EcuReset UDS : $01 HardReset Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_ROE_REPORT
Abfrage Status der Aktivierung der aktiven Fehlermeldung UDS: $86 ResponseOnEvent $04 report activated events $02 eventWindowTime - infinite (LH Diagnosemaster V11 oder höher, Umsetzung nach LH V6 - V10 wird jedoch toleriert)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ROE_AKTIV | char | 0x00 = Aktive Fehlermeldung deaktiviert 0x01 = Aktive Fehlermeldung aktiviert 0xFF = Status der aktiven Fehlermeldung nicht feststellbar |
| STAT_ROE_AKTIV_TEXT | string | Interpretation von STAT_ROE_AKTIV table UDS_TAB_ROE_AKTIV TEXT |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERN_ROE_PERSISTENT_STOP
Persistentes Deaktivieren der aktiven Fehlermeldung an den Diagnosemaster ueber TAS UDS : $86 ResponseOnEvent $40 Stop persistent $02 (EventWindowTime) gültig für LH Diagnosemaster V6 - V12 (Stand 2013)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STEUERN_ROE_PERSISTENT_START
Persistentes Aktivieren der aktiven Fehlermeldung an den Diagnosemaster ueber TAS UDS : $86 ResponseOnEvent $45 Start persistent $02 (EventWindowTime) gültig für LH Diagnosemaster V6 - V12 (Stand 2013)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
CPS_LESEN
Codierpruefstempel lesen UDS : $22 ReadDataByIdentifier UDS : $37FE DataIdentifier Codierpruefstempel Modus: Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| CPS | string | Codierpruefstempel bis SP2021 bestehend aus VIN7 7 Zeichen (ASCII) Codierpruefstempel ab SP2021 bestehend aus Codierdatum 6 Zeichen (3 Byte Hex) bestehend aus TesterNr 6 Zeichen (3 Byte Hex) bestehend aus LizenzID 10 Zeichen (5 Byte Hex) bestehend aus VIN7 7 Zeichen (ASCII) |
| CPS_VIN7 | string | 7 Zeichen (ASCII) |
| CPS_DATUM | string | erst ab SP2021 Codierdatum 8 Zeichen TT.MM.JJJJ |
| CPS_TESTERNR | string | erst ab SP2021 Tester-Nummer 6 Zeichen hex |
| CPS_LIZENZID | string | erst ab SP2021 Tester-Lizenz-ID 10 Zeichen hex |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_SVK_SLAVE_FL
Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $401A SVK_AKTUELL (Default) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SVK | string | table SVK_ID BEZEICHNUNG WERT default SVK_AKTUELL |
Results
| Name | Type | Comment |
|---|---|---|
| PROG_TEST | int | Programmierabhaengigkeiten (ProgrammingDependenciesChecked) 1: IO : Signaturpruefung und ProgrammingDependenciesCheck erfolgreich 2: NIO: mindestens eine SWE fehlerhaft oder ProgrammingDependenciesCheck nicht durchgefuehrt 3: NIO: mindestens eine SWE passt nicht mit einer HWE zusammen 4: NIO: mindestens eine SWE passt nicht mit einer anderen SWE zusammen sonst: reserviert |
| ANZAHL_EINHEITEN | int | Anzahl der xWEn |
| PROG_DATUM | string | Programmierdatum (DD.MM.YY) |
| PROG_KM | long | KM-Stand bei Programmierung (10 KM bis 655350 KM) Inkrement sind 10 KM -1: KM-Stand wird nicht unterstuetzt |
| PROZESSKLASSE_WERT | int | table Prozessklassen WERT dezimale Angabe der Prozessklasse |
| PROZESSKLASSE_TEXT | string | table Prozessklassen BEZEICHNUNG Text-Angabe der Prozessklasse |
| PROZESSKLASSE_KURZTEXT | string | table Prozessklassen PROZESSKLASSE Text-Angabe des Prozessklassenkurztextes |
| SGBM_IDENTIFIER | string | Angabe SGBM-ID der Prozessklasse |
| VERSION | string | Angabe der Version der Prozessklasse |
| SGBM_ID | string | Angabe von Prozessklasse, SGBM-Identifier, Version |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_SVK_SLAVE_FR
Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $4019 SVK_AKTUELL (Default) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SVK | string | table SVK_ID BEZEICHNUNG WERT default SVK_AKTUELL |
Results
| Name | Type | Comment |
|---|---|---|
| PROG_TEST | int | Programmierabhaengigkeiten (ProgrammingDependenciesChecked) 1: IO : Signaturpruefung und ProgrammingDependenciesCheck erfolgreich 2: NIO: mindestens eine SWE fehlerhaft oder ProgrammingDependenciesCheck nicht durchgefuehrt 3: NIO: mindestens eine SWE passt nicht mit einer HWE zusammen 4: NIO: mindestens eine SWE passt nicht mit einer anderen SWE zusammen sonst: reserviert |
| ANZAHL_EINHEITEN | int | Anzahl der xWEn |
| PROG_DATUM | string | Programmierdatum (DD.MM.YY) |
| PROG_KM | long | KM-Stand bei Programmierung (10 KM bis 655350 KM) Inkrement sind 10 KM -1: KM-Stand wird nicht unterstuetzt |
| PROZESSKLASSE_WERT | int | table Prozessklassen WERT dezimale Angabe der Prozessklasse |
| PROZESSKLASSE_TEXT | string | table Prozessklassen BEZEICHNUNG Text-Angabe der Prozessklasse |
| PROZESSKLASSE_KURZTEXT | string | table Prozessklassen PROZESSKLASSE Text-Angabe des Prozessklassenkurztextes |
| SGBM_IDENTIFIER | string | Angabe SGBM-ID der Prozessklasse |
| VERSION | string | Angabe der Version der Prozessklasse |
| SGBM_ID | string | Angabe von Prozessklasse, SGBM-Identifier, Version |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
STATUS_SVK_SLAVE_RL
Informationen zur Steuergeraete-Verbau-Kennung UDS : $22 ReadDataByIdentifier UDS : $40xx Sub-Parameter fuer SVK UDS : $4018 SVK_AKTUELL (Default) Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SVK | string | table SVK_ID BEZEICHNUNG WERT default SVK_AKTUELL |
Results
| Name | Type | Comment |
|---|---|---|
| PROG_TEST | int | Programmierabhaengigkeiten (ProgrammingDependenciesChecked) 1: IO : Signaturpruefung und ProgrammingDependenciesCheck erfolgreich 2: NIO: mindestens eine SWE fehlerhaft oder ProgrammingDependenciesCheck nicht durchgefuehrt 3: NIO: mindestens eine SWE passt nicht mit einer HWE zusammen 4: NIO: mindestens eine SWE passt nicht mit einer anderen SWE zusammen sonst: reserviert |
| ANZAHL_EINHEITEN | int | Anzahl der xWEn |
| PROG_DATUM | string | Programmierdatum (DD.MM.YY) |
| PROG_KM | long | KM-Stand bei Programmierung (10 KM bis 655350 KM) Inkrement sind 10 KM -1: KM-Stand wird nicht unterstuetzt |
| PROZESSKLASSE_WERT | int | table Prozessklassen WERT dezimale Angabe der Prozessklasse |
| PROZESSKLASSE_TEXT | string | table Prozessklassen BEZEICHNUNG Text-Angabe der Prozessklasse |
| PROZESSKLASSE_KURZTEXT | string | table Prozessklassen PROZESSKLASSE Text-Angabe des Prozessklassenkurztextes |
| SGBM_IDENTIFIER | string | Angabe SGBM-ID der Prozessklasse |
| VERSION | string | Angabe der Version der Prozessklasse |
| SGBM_ID | string | Angabe von Prozessklasse, SGBM-Identifier, Version |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _REQUEST | binary | Hex-Auftrag an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
SENSOREN_IDENT_LESEN_HC2
This routine blabbla
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| SENSOR_VR_VERBAUORT | string | Verbauort vorne rechts = Spurwechselradarsensor vorne rechts |
| SENSOR_VR_VERBAUORT_NR | long | Verbauort vorne rechts = 0x7200 |
| SENSOR_VR_PART_NR | string | Produktionsdatum und lfd Nummer (Achtung Ueberlauf 3 digits) |
| SENSOR_VL_VERBAUORT | string | Verbauort vorne links = Spurwechselradarsensor vorne links |
| SENSOR_VL_VERBAUORT_NR | long | Verbauort vorne links = 0x7208 |
| SENSOR_VL_PART_NR | string | Produktionsdatum und lfd Nummer (Achtung Ueberlauf 3 digits) |
| SENSOR_HR_VERBAUORT | string | Verbauort hinten rechts = Spurwechselradarsensor hinten rechts (Master) |
| SENSOR_HR_VERBAUORT_NR | long | Verbauort hinten rechts = 0x7210 |
| SENSOR_HR_PART_NR | string | Produktionsdatum und lfd Nummer (real, master stellt vierstellige laufende Nummer zur Verfuegung) |
| SENSOR_HL_VERBAUORT | string | Verbauort hinten links = Spurwechselradarsensor hinten links |
| SENSOR_HL_VERBAUORT_NR | long | Verbauort hinten links = 0x7218 |
| SENSOR_HL_PART_NR | string | Produktionsdatum und lfd Nummer (Achtung Ueberlauf 3 digits) |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _REQUEST | binary | Hex-request an SG |
| _RESPONSE | binary | Hex-Antwort von SG |
Tables
Index
- JOBRESULT (76 × 2)
- LIEFERANTEN (142 × 2)
- FARTTEXTE (35 × 2)
- DIGITALARGUMENT (17 × 2)
- PROZESSKLASSEN (26 × 3)
- SVK_ID (65 × 2)
- DTCEXTENDEDDATARECORDNUMBER (5 × 3)
- DTCSNAPSHOTIDENTIFIER (7 × 9)
- FEHLERKLASSE (5 × 2)
- DIAGMODE (12 × 3)
- IARTTEXTE (35 × 2)
- UDS_TAB_ROE_AKTIV (3 × 2)
- ARG_0X4011_D (1 × 12)
- ARG_0X4012_D (1 × 12)
- ARG_0X4014_D (1 × 12)
- ARG_0X4015_D (1 × 12)
- ARG_0X4016_D (1 × 12)
- ARG_0XA101_R (4 × 14)
- ARG_0XA162_R (1 × 14)
- ARG_0XA163_R (4 × 14)
- ARG_0XD9E4_D (1 × 12)
- BETRIEBSMODE (6 × 3)
- ENERGIESPARMODE_DOP (4 × 2)
- EXTENDED_ENERGY_MODE_DOP (16 × 2)
- FDETAILSTRUKTUR (6 × 2)
- FEHLERKLASSE_DOP (4 × 2)
- FORTTEXTE (122 × 4)
- FUMWELTTEXTE (13 × 9)
- IDETAILSTRUKTUR (5 × 2)
- IORTTEXTE (1 × 4)
- IUMWELTTEXTE (1 × 9)
- JOBRESULTEXTENDED (1 × 2)
- PC (12 × 2)
- PROG_DEP_DOP (6 × 2)
- RDBI_ADS_DOP (8 × 2)
- RDBI_PC_PCS_DOP (3 × 2)
- RDTCI_LEV_DOP (9 × 2)
- RES_0X2502_D (3 × 10)
- RES_0X2504_D (6 × 10)
- RES_0X4006_R (1 × 13)
- RES_0X4010_D (20 × 10)
- RES_0XA101_R (1 × 13)
- RES_0XA161_R (1 × 13)
- RES_0XA162_R (2 × 13)
- RES_0XA163_R (1 × 13)
- RES_0XD9E2_D (4 × 10)
- RES_0XD9E3_D (9 × 10)
- RES_0XD9E4_D (1 × 10)
- RES_0XD9E5_D (4 × 10)
- SG_FUNKTIONEN (37 × 16)
- STATUS_RAM_DATEN_SCHREIBEN_TAB (4 × 2)
- SVK_VERSION_DOP (2 × 2)
- TAB_0X28A6 (1 × 5)
- TAB_ANZAHL_SLAVES (3 × 2)
- TAB_ENERGIESPARMODE_DOP (5 × 2)
- TAB_ENTLASTUNG_GENERATOR (16 × 2)
- TAB_INTENSITAETSSTUFE (16 × 2)
- TAB_LED_XH (6 × 2)
- TAB_MUSTER_LENKRAD (16 × 2)
- TAB_PROG_DEP_SLAVE_DOP (6 × 2)
- TAB_RADAR_HF_MODUS (3 × 2)
- TAB_RICHTUNG (3 × 2)
- TAB_STATUS_RADAR_HF_MODUS (3 × 2)
- TAB_STATUS_ROUTINE (7 × 2)
- TAB_SVK_SLAVE_VERSION_DOP (2 × 2)
JOBRESULT
Dimensions: 76 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0x10 | ERROR_ECU_GENERAL_REJECT |
| 0x11 | ERROR_ECU_SERVICE_NOT_SUPPORTED |
| 0x12 | ERROR_ECU_SUB_FUNCTION_NOT_SUPPORTED |
| 0x13 | ERROR_ECU_INCORRECT_MESSAGE_LENGTH_OR_INVALID_FORMAT |
| 0x14 | ERROR_ECU_RESPONSE_TOO_LONG |
| 0x21 | ERROR_ECU_BUSY_REPEAT_REQUEST |
| 0x22 | ERROR_ECU_CONDITIONS_NOT_CORRECT |
| 0x24 | ERROR_ECU_REQUEST_SEQUENCE_ERROR |
| 0x25 | ERROR_ECU_NO_RESPONSE_FROM_SUBNET_COMPONENT |
| 0x26 | ERROR_ECU_FAILURE_PREVENTS_EXECUTION_OF_REQUESTED_ACTION |
| 0x31 | ERROR_ECU_REQUEST_OUT_OF_RANGE |
| 0x33 | ERROR_ECU_SECURITY_ACCESS_DENIED |
| 0x35 | ERROR_ECU_INVALID_KEY |
| 0x36 | ERROR_ECU_EXCEED_NUMBER_OF_ATTEMPTS |
| 0x37 | ERROR_ECU_REQUIRED_TIME_DELAY_NOT_EXPIRED |
| 0x70 | ERROR_ECU_UPLOAD_DOWNLOAD_NOT_ACCEPTED |
| 0x71 | ERROR_ECU_TRANSFER_DATA_SUSPENDED |
| 0x72 | ERROR_ECU_GENERAL_PROGRAMMING_FAILURE |
| 0x73 | ERROR_ECU_WRONG_BLOCK_SEQUENCE_COUNTER |
| 0x78 | ERROR_ECU_REQUEST_CORRECTLY_RECEIVED__RESPONSE_PENDING |
| 0x7E | ERROR_ECU_SUB_FUNCTION_NOT_SUPPORTED_IN_ACTIVE_SESSION |
| 0x7F | ERROR_ECU_SERVICE_NOT_SUPPORTED_IN_ACTIVE_SESSION |
| 0x81 | ERROR_ECU_RPM_TOO_HIGH |
| 0x82 | ERROR_ECU_RPM_TOO_LOW |
| 0x83 | ERROR_ECU_ENGINE_IS_RUNNING |
| 0x84 | ERROR_ECU_ENGINE_IS_NOT_RUNNING |
| 0x85 | ERROR_ECU_ENGINE_RUN_TIME_TOO_LOW |
| 0x86 | ERROR_ECU_TEMPERATURE_TOO_HIGH |
| 0x87 | ERROR_ECU_TEMPERATURE_TOO_LOW |
| 0x88 | ERROR_ECU_VEHICLE_SPEED_TOO_HIGH |
| 0x89 | ERROR_ECU_VEHICLE_SPEED_TOO_LOW |
| 0x8A | ERROR_ECU_THROTTLE_PEDAL_TOO_HIGH |
| 0x8B | ERROR_ECU_THROTTLE_PEDAL_TOO_LOW |
| 0x8C | ERROR_ECU_TRANSMISSION_RANGE_NOT_IN_NEUTRAL |
| 0x8D | ERROR_ECU_TRANSMISSION_RANGE_NOT_IN_GEAR |
| 0x8F | ERROR_ECU_BRAKE_SWITCH_NOT_CLOSED |
| 0x90 | ERROR_ECU_SHIFTER_LEVER_NOT_IN_PARK |
| 0x91 | ERROR_ECU_TORQUE_CONVERTER_CLUTCH_LOCKED |
| 0x92 | ERROR_ECU_VOLTAGE_TOO_HIGH |
| 0x93 | ERROR_ECU_VOLTAGE_TOO_LOW |
| ?00? | OKAY |
| ?01? | ERROR_ECU_NO_RESPONSE |
| ?02? | ERROR_ECU_INCORRECT_LEN |
| ?03? | ERROR_ECU_INCORRECT_RESPONSE_ID |
| ?04? | ERROR_ECU_TA_RESPONSE_NOT_SA_REQUEST |
| ?05? | ERROR_ECU_SA_RESPONSE_NOT_TA_REQUEST |
| ?06? | ERROR_ECU_RESPONSE_INCORRECT_DATA_IDENTIFIER |
| ?07? | ERROR_ECU_RESPONSE_TOO_MUCH_DATA |
| ?08? | ERROR_ECU_RESPONSE_TOO_LESS_DATA |
| ?09? | ERROR_ECU_RESPONSE_VALUE_OUT_OF_RANGE |
| ?0A? | ERROR_TABLE |
| ?10? | ERROR_F_CODE |
| ?12? | ERROR_INTERPRETATION |
| ?13? | ERROR_F_POS |
| ?14? | ERROR_ECU_RESPONSE_INCORRECT_IO_CONTROL_PARAMETER |
| ?15? | ERROR_ECU_RESPONSE_INCORRECT_ROUTINE_CONTROL_TYPE |
| ?16? | ERROR_ECU_RESPONSE_INCORRECT_SUB_FUNCTION |
| ?17? | ERROR_ECU_RESPONSE_INCORRECT_DYNAMICALLY_DEFINED_DATA_IDENTIFIER |
| ?18? | ERROR_ECU_RESPONSE_NO_STRING_END_CHAR |
| ?19? | ERROR_ECU_RESPONSE_INCORRECT_ROUTINE_IDENTIFIER |
| ?1A? | ERROR_ECU_RESPONSE_INCORRECT_RESET_TYPE |
| ?1B? | ERROR_ECU_RESPONSE_INCORRECT_SERIAL_NUMBER_FORMAT |
| ?1C? | ERROR_ECU_RESPONSE_INCORRECT_DTC_BY_STATUS_MASK |
| ?1D? | ERROR_ECU_RESPONSE_INCORRECT_DTC_STATUS_AVAILABILITY_MASK |
| ?1E? | ERROR_ECU_RESPONSE_INCORRECT_ROUTINE_CONTROL_IDENTIFIER |
| ?50? | ERROR_BYTE1 |
| ?51? | ERROR_BYTE2 |
| ?52? | ERROR_BYTE3 |
| ?60? | ERROR_VERIFY |
| ?61? | ERROR_ECU_RESPONSE_ZGW |
| ?62? | ERROR_ECU_RESPONSE_BACKUP |
| ?70? | ERROR_CALID_CVN_INCORRECT_LEN |
| ?80? | ERROR_SVK_INCORRECT_LEN |
| ?81? | ERROR_SVK_INCORRECT_FINGERPRINT |
| ?F0? | ERROR_ARGUMENT |
| 0xXY | ERROR_ECU_UNKNOWN_NEGATIVE_RESPONSE |
LIEFERANTEN
Dimensions: 142 rows × 2 columns
| LIEF_NR | LIEF_TEXT |
|---|---|
| 0x000001 | Reinshagen / Delphi |
| 0x000002 | Leopold Kostal GmbH & Co. KG |
| 0x000003 | Hella Fahrzeugkomponenten GmbH |
| 0x000004 | Siemens |
| 0x000005 | Eaton |
| 0x000006 | UTA |
| 0x000007 | Helbako GmbH |
| 0x000008 | Robert Bosch GmbH |
| 0x000009 | Lear Corporation |
| 0x000010 | VDO |
| 0x000011 | Valeo GmbH |
| 0x000012 | MBB |
| 0x000013 | Kammerer |
| 0x000014 | SWF |
| 0x000015 | Blaupunkt |
| 0x000016 | Philips |
| 0x000017 | Alpine Electronics GmbH |
| 0x000018 | Continental Teves AG & Co. OHG |
| 0x000019 | Elektromatik Südafrika |
| 0x000020 | Harman Becker Automotive Systems |
| 0x000021 | Preh GmbH |
| 0x000022 | Alps Electric Co. Ltd. |
| 0x000023 | Motorola |
| 0x000024 | Temic |
| 0x000025 | Webasto SE |
| 0x000026 | MotoMeter |
| 0x000027 | Delphi Automotive PLC |
| 0x000028 | DODUCO (Beru) |
| 0x000029 | DENSO |
| 0x000030 | NEC |
| 0x000031 | DASA |
| 0x000032 | Pioneer Corporation |
| 0x000033 | Jatco |
| 0x000034 | FUBA Automotive GmbH & Co. KG |
| 0x000035 | UK-NSI |
| 0x000036 | AABG |
| 0x000037 | Dunlop |
| 0x000038 | Sachs |
| 0x000039 | ITT |
| 0x000040 | FTE (Fahrzeugtechnik Ebern) |
| 0x000041 | Megamos |
| 0x000042 | TRW Automotive GmbH |
| 0x000043 | WABCO Fahrzeugsysteme GmbH |
| 0x000044 | ISAD Electronic Systems |
| 0x000045 | HEC Hella Electronics Corporation |
| 0x000046 | Gemel |
| 0x000047 | ZF Friedrichshafen AG |
| 0x000048 | GMPT |
| 0x000049 | Harman Becker Automotive Systems GmbH |
| 0x000050 | Remes GmbH |
| 0x000051 | ZF Lenksysteme GmbH |
| 0x000052 | Magneti Marelli S.p.A. |
| 0x000053 | Johnson Controls Inc. |
| 0x000054 | GETRAG Getriebe- und Zahnradf. Hermann Hagenmeyer GmbH & Co. KG |
| 0x000055 | Behr-Hella Thermocontrol GmbH |
| 0x000056 | Siemens VDO Automotive |
| 0x000057 | Visteon Innovation & Technology GmbH |
| 0x000058 | Autoliv AB |
| 0x000059 | Haberl Electronic GmbH & Co. KG |
| 0x000060 | Magna International Inc. |
| 0x000061 | Marquardt GmbH |
| 0x000062 | AB Elektronik GmbH |
| 0x000063 | SDVO/BORG |
| 0x000064 | Hirschmann Car Communication GmbH |
| 0x000065 | hoerbiger-electronics |
| 0x000066 | Thyssen Krupp Automotive |
| 0x000067 | Gentex Corporation |
| 0x000068 | Atena GmbH |
| 0x000069 | Magna-Donelly |
| 0x000070 | Koyo Steeting Europe |
| 0x000071 | NSI Beheer B.V. |
| 0x000072 | Aisin AW Co. Ltd. |
| 0x000073 | Schorlock |
| 0x000074 | Schrader Electronics Ltd. |
| 0x000075 | Huf-Electronics Bretten GmbH |
| 0x000076 | CEL |
| 0x000077 | AUDIO MOBIL Elektronik GmbH |
| 0x000078 | rd electronic |
| 0x000079 | iSYS RTS GmbH |
| 0x000080 | Westfalia-Automotive GmbH |
| 0x000081 | Tyco Electronics |
| 0x000082 | Paragon AG |
| 0x000083 | IEE S.A. |
| 0x000084 | TEMIC AUTOMOTIVE of NA |
| 0x000085 | Sonceboz S.A. |
| 0x000086 | Meta System S.p.A. |
| 0x000087 | Huf Hülsbeck & Fürst GmbH & Co. KG |
| 0x000088 | MANN+HUMMEL GmbH |
| 0x000089 | Brose Fahrzeugteile GmbH & Co. |
| 0x000090 | Keihin |
| 0x000091 | Vimercati S.p.a |
| 0x000092 | CRH |
| 0x000093 | TPO Display Corp |
| 0x000094 | Küster Automotive GmbH |
| 0x000095 | Hitachi Automotive |
| 0x000096 | Continental AG |
| 0x000097 | TI-Automotive |
| 0x000098 | Hydro |
| 0x000099 | Johnson Controls Inc. |
| 0x00009A | Takata-Petri |
| 0x00009B | Mitsubishi Electric B.V. (Melco) |
| 0x00009C | Autokabel |
| 0x00009D | GKN Plc |
| 0x00009E | Zollner Elektronik AG |
| 0x00009F | peiker acustic GmbH & Co. KG |
| 0x0000A0 | Bosal-Oris |
| 0x0000A1 | Cobasys |
| 0x0000A2 | Automotive Lighting Reutlingen GmbH |
| 0x0000A3 | CONTI VDO |
| 0x0000A4 | A.D.C. Automotive Distance Control Systems GmbH |
| 0x0000A5 | Novero Dabendorf GmbH |
| 0x0000A6 | LAMES S.p.a. |
| 0x0000A7 | Magna/Closures |
| 0x0000A8 | Harbin Wan Yu Technology Co |
| 0x0000A9 | ThyssenKrupp Presta AG |
| 0x0000AA | ArvinMeritor |
| 0x0000AB | Kongsberg Automotive GmbH |
| 0x0000AC | SMR Automotive Mirrors Stuttgart GmbH |
| 0x0000AD | So.Ge.Mi. |
| 0x0000AE | MTA S.p.A. |
| 0x0000AF | Alfmeier Präzision AG |
| 0x0000B0 | Eltek Deutechland GmbH |
| 0x0000B1 | OMRON Automotive Electronics Europe GmbH |
| 0x0000B2 | ASK Industries GmbH |
| 0x0000B3 | CML Innovative Technologies GmbH & Co. KG |
| 0x0000B4 | APAG Elektronik AG |
| 0x0000B5 | Nexteer Automotive |
| 0x0000B6 | Hans Widmaier Fernmelde- und Feinwerktechnik |
| 0x0000B7 | Robert Bosch Battery Systems GmbH |
| 0x0000B8 | Kyocera Display Europe GmbH |
| 0x0000B9 | Magna Powertrain AG & Co. KG |
| 0x0000BA | BorgWarner Beru Systems GmbH |
| 0x0000BB | BMW AG |
| 0x0000BC | Benteler Duncan Plant |
| 0x0000BD | U-Shin Deutschland Zugangssysteme GmbH |
| 0x0000BE | Schaeffler Technologies AG & Co. KG |
| 0x0000BF | JTEKT Corporation |
| 0x0000C0 | VLF |
| 0x0000C1 | Flextronics |
| 0x0000C2 | LG Chem |
| 0x0000C3 | Panasonic |
| 0xFFFFFF | unbekannter Hersteller |
FARTTEXTE
Dimensions: 35 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | keine Fehlerart verfügbar |
| 0x04 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x05 | Fehler momentan vorhanden und bereits gespeichert |
| 0x08 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x09 | Fehler momentan vorhanden und bereits gespeichert |
| 0x0C | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x0D | Fehler momentan vorhanden und bereits gespeichert |
| 0x20 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x21 | Fehler momentan vorhanden und bereits gespeichert |
| 0x24 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x25 | Fehler momentan vorhanden und bereits gespeichert |
| 0x28 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x29 | Fehler momentan vorhanden und bereits gespeichert |
| 0x2C | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x2D | Fehler momentan vorhanden und bereits gespeichert |
| 0x40 | unbekannte Fehlerart |
| 0x44 | Fehler gespeichert |
| 0x45 | Fehler gespeichert |
| 0x48 | Fehler gespeichert |
| 0x49 | Fehler gespeichert |
| 0x4C | Fehler gespeichert |
| 0x4D | Fehler gespeichert |
| 0x60 | Fehler gespeichert |
| 0x61 | Fehler gespeichert |
| 0x64 | Fehler gespeichert |
| 0x65 | Fehler gespeichert |
| 0x68 | Fehler gespeichert |
| 0x69 | Fehler gespeichert |
| 0x6C | Fehler gespeichert |
| 0x6D | Fehler gespeichert |
| 0x10 | Testbedingungen erfüllt |
| 0x11 | Testbedingungen noch nicht erfüllt |
| 0x80 | Fehler würde kein Aufleuchten einer Warnlampe verursachen |
| 0x81 | Fehler würde das Aufleuchten einer Warnlampe verursachen |
| 0xFF | unbekannte Fehlerart |
DIGITALARGUMENT
Dimensions: 17 rows × 2 columns
| TEXT | WERT |
|---|---|
| ein | 1 |
| aus | 0 |
| ja | 1 |
| nein | 0 |
| auf | 1 |
| ab | 0 |
| an | 1 |
| yes | 1 |
| no | 0 |
| on | 1 |
| off | 0 |
| up | 1 |
| down | 0 |
| true | 1 |
| false | 0 |
| 1 | 1 |
| 0 | 0 |
PROZESSKLASSEN
Dimensions: 26 rows × 3 columns
| WERT | PROZESSKLASSE | BEZEICHNUNG |
|---|---|---|
| 0x00 | - | ungueltig |
| 0x01 | HWEL | Hardware (Elektronik) |
| 0x02 | HWAP | Hardwareauspraegung |
| 0x03 | HWFR | Hardwarefarbe |
| 0x05 | CAFD | Codierdaten |
| 0x06 | BTLD | Bootloader |
| 0x08 | SWFL | Software ECU Speicherimage |
| 0x09 | SWFF | Flash File Software |
| 0x0A | SWPF | Pruefsoftware |
| 0x0B | ONPS | Onboard Programmiersystem |
| 0x0F | FAFP | FA2FP |
| 0x1A | TLRT | Temporaere Loeschroutine |
| 0x1B | TPRG | Temporaere Programmierroutine |
| 0x07 | FLSL | Flashloader Slave |
| 0x0C | IBAD | Interaktive Betriebsanleitung Daten |
| 0x10 | FCFA | Freischaltcode Fahrzeug-Auftrag |
| 0x1C | BLUP | Bootloader-Update Applikation |
| 0x1D | FLUP | Flashloader-Update Applikation |
| 0xC0 | SWUP | Software-Update Package |
| 0xC1 | SWIP | Index Software-Update Package |
| 0xA0 | ENTD | Entertainment Daten |
| 0xA1 | NAVD | Navigation Daten |
| 0xA2 | FCFN | Freischaltcode Funktion |
| 0x04 | GWTB | Gateway-Tabelle |
| 0x0D | SWFK | BEGU: Detaillierung auf SWE-Ebene |
| 0xFF | - | ungueltig |
SVK_ID
Dimensions: 65 rows × 2 columns
| WERT | BEZEICHNUNG |
|---|---|
| 0x01 | SVK_AKTUELL |
| 0x02 | SVK_SUPPLIER |
| 0x03 | SVK_WERK |
| 0x04 | SVK_BACKUP_01 |
| 0x05 | SVK_BACKUP_02 |
| 0x06 | SVK_BACKUP_03 |
| 0x07 | SVK_BACKUP_04 |
| 0x08 | SVK_BACKUP_05 |
| 0x09 | SVK_BACKUP_06 |
| 0x0A | SVK_BACKUP_07 |
| 0x0B | SVK_BACKUP_08 |
| 0x0C | SVK_BACKUP_09 |
| 0x0D | SVK_BACKUP_10 |
| 0x0E | SVK_BACKUP_11 |
| 0x0F | SVK_BACKUP_12 |
| 0x10 | SVK_BACKUP_13 |
| 0x11 | SVK_BACKUP_14 |
| 0x12 | SVK_BACKUP_15 |
| 0x13 | SVK_BACKUP_16 |
| 0x14 | SVK_BACKUP_17 |
| 0x15 | SVK_BACKUP_18 |
| 0x16 | SVK_BACKUP_19 |
| 0x17 | SVK_BACKUP_20 |
| 0x18 | SVK_BACKUP_21 |
| 0x19 | SVK_BACKUP_22 |
| 0x1A | SVK_BACKUP_23 |
| 0x1B | SVK_BACKUP_24 |
| 0x1C | SVK_BACKUP_25 |
| 0x1D | SVK_BACKUP_26 |
| 0x1E | SVK_BACKUP_27 |
| 0x1F | SVK_BACKUP_28 |
| 0x20 | SVK_BACKUP_29 |
| 0x21 | SVK_BACKUP_30 |
| 0x22 | SVK_BACKUP_31 |
| 0x23 | SVK_BACKUP_32 |
| 0x24 | SVK_BACKUP_33 |
| 0x25 | SVK_BACKUP_34 |
| 0x26 | SVK_BACKUP_35 |
| 0x27 | SVK_BACKUP_36 |
| 0x28 | SVK_BACKUP_37 |
| 0x29 | SVK_BACKUP_38 |
| 0x2A | SVK_BACKUP_39 |
| 0x2B | SVK_BACKUP_40 |
| 0x2C | SVK_BACKUP_41 |
| 0x2D | SVK_BACKUP_42 |
| 0x2E | SVK_BACKUP_43 |
| 0x2F | SVK_BACKUP_44 |
| 0x30 | SVK_BACKUP_45 |
| 0x31 | SVK_BACKUP_46 |
| 0x32 | SVK_BACKUP_47 |
| 0x33 | SVK_BACKUP_48 |
| 0x34 | SVK_BACKUP_49 |
| 0x35 | SVK_BACKUP_50 |
| 0x36 | SVK_BACKUP_51 |
| 0x37 | SVK_BACKUP_52 |
| 0x38 | SVK_BACKUP_53 |
| 0x39 | SVK_BACKUP_54 |
| 0x3A | SVK_BACKUP_55 |
| 0x3B | SVK_BACKUP_56 |
| 0x3C | SVK_BACKUP_57 |
| 0x3D | SVK_BACKUP_58 |
| 0x3E | SVK_BACKUP_59 |
| 0x3F | SVK_BACKUP_60 |
| 0x40 | SVK_BACKUP_61 |
| 0xXY | ERROR_UNKNOWN |
DTCEXTENDEDDATARECORDNUMBER
Dimensions: 5 rows × 3 columns
| WERT | TEXT | ANZ_BYTE |
|---|---|---|
| 0x00 | ISO_RESERVED | 0 |
| 0x01 | CONDITION_BYTE | 1 |
| 0x02 | HFK | 1 |
| 0x03 | HLZ | 1 |
| 0xFF | RECORD_UNKNOWN | 0 |
DTCSNAPSHOTIDENTIFIER
Dimensions: 7 rows × 9 columns
| UWNR | UWTEXT | UW_EINH | L/H | UWTYP | NAME | MUL | DIV | ADD |
|---|---|---|---|---|---|---|---|---|
| 0x1700 | KM_STAND | 0-n | - | 0xFFFFFF | - | 1 | 1 | 0.000000 |
| 0x1701 | ABS_ZEIT | 0-n | - | 0xFFFFFFFF | - | 1 | 1 | 0.000000 |
| 0x1702 | SAE_CODE | 0-n | - | 0xFFFFFF | - | 1 | 1 | 0.000000 |
| 0x1731 | Fehlerklasse_DTC | - | - | u char | - | 1 | 1 | 0.000000 |
| 0x1750 | PWF_Basinetz | 0-n | - | 0xFF | - | 1 | 1 | 0.000000 |
| 0x1751 | PWF_Teilnetz | 0-n | - | 0xFFFFFF | - | 1 | 1 | 0.000000 |
| 0xFFFF | IDENTIFIER_UNKNOWN | - | - | 0xFFFFFF | - | 1 | 1 | 0.000000 |
FEHLERKLASSE
Dimensions: 5 rows × 2 columns
| NR | TEXT |
|---|---|
| 0x00 | Keine Fehlerklasse verfuegbar |
| 0x01 | Ueberpruefung bei naechstem Werkstattbesuch |
| 0x02 | Ueberpruefung bei naechstem Halt |
| 0x04 | Ueberpruefung sofort erforderlich ! |
| 0xFF | unbekannte Fehlerklasse |
DIAGMODE
Dimensions: 12 rows × 3 columns
| NR | MODE | MODE_TEXT |
|---|---|---|
| 0x00 | UNGUELTIG | DefaultMode |
| 0x01 | DEFAULT | DefaultMode |
| 0x02 | ECUPM | ECUProgrammingMode |
| 0x03 | ECUEXTDIAG | ECUExtendedDiagnosticSession |
| 0x04 | ECUSSDS | ECUSafetySystemDiagnosticSession |
| 0x40 | ECUEOL | ECUEndOfLineSession |
| 0x41 | ECUCODE | ECUCodingSession |
| 0x42 | ECUSWT | ECUSwtSession |
| 0x43 | ECUHDD | ECUHDDDownloadSession |
| 0x4F | ECUDEVELOP | ECUDevelopmentSession |
| 0x5F | ECUGDM | ECUGarageDiagnoseMode |
| 0xXY | -- | unbekannter Diagnose-Mode |
IARTTEXTE
Dimensions: 35 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | keine Fehlerart verfügbar |
| 0x04 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x05 | Fehler momentan vorhanden und bereits gespeichert |
| 0x08 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x09 | Fehler momentan vorhanden und bereits gespeichert |
| 0x0C | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x0D | Fehler momentan vorhanden und bereits gespeichert |
| 0x20 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x21 | Fehler momentan vorhanden und bereits gespeichert |
| 0x24 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x25 | Fehler momentan vorhanden und bereits gespeichert |
| 0x28 | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x29 | Fehler momentan vorhanden und bereits gespeichert |
| 0x2C | Fehler momentan nicht vorhanden, aber bereits gespeichert |
| 0x2D | Fehler momentan vorhanden und bereits gespeichert |
| 0x40 | unbekannte Fehlerart |
| 0x44 | Fehler gespeichert |
| 0x45 | Fehler gespeichert |
| 0x48 | Fehler gespeichert |
| 0x49 | Fehler gespeichert |
| 0x4C | Fehler gespeichert |
| 0x4D | Fehler gespeichert |
| 0x60 | Fehler gespeichert |
| 0x61 | Fehler gespeichert |
| 0x64 | Fehler gespeichert |
| 0x65 | Fehler gespeichert |
| 0x68 | Fehler gespeichert |
| 0x69 | Fehler gespeichert |
| 0x6C | Fehler gespeichert |
| 0x6D | Fehler gespeichert |
| 0x10 | Testbedingungen erfüllt |
| 0x11 | Testbedingungen noch nicht erfüllt |
| 0x80 | Fehler würde kein Aufleuchten einer Warnlampe verursachen |
| 0x81 | Fehler würde das Aufleuchten einer Warnlampe verursachen |
| 0xFF | unbekannte Fehlerart |
UDS_TAB_ROE_AKTIV
Dimensions: 3 rows × 2 columns
| NR | TEXT |
|---|---|
| 0x00 | Aktive Fehlermeldung deaktiviert |
| 0x01 | Aktive Fehlermeldung aktiviert |
| 0xFF | Status der aktiven Fehlermeldung nicht feststellbar |
ARG_0X4011_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JUSTAGEWINKEL_SENSOR_HINTEN_RECHTS | - | high | int | - | - | 1000.0 | 1.0 | 0.0 | - | - | Korrektur des horizontalen Radarsensorwinkels nach Verbauort Hinten Rechts (HR) |
ARG_0X4012_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JUSTAGEWINKEL_SENSOR_HINTEN_LINKS | - | high | int | - | - | 1000.0 | 1.0 | 0.0 | - | - | Korrektur des horizontalen Radarsensorwinkels nach Verbauort Hinten Links (HL) |
ARG_0X4014_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JUSTAGEWINKEL_SENSOR_VORNE_RECHTS | - | high | int | - | - | 1000.0 | 1.0 | 0.0 | - | - | Korrektur des horizontalen Radarsensorwinkels nach Verbauort Vorne Rechts (VR) |
ARG_0X4015_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JUSTAGEWINKEL_SENSOR_VORNE_LINKS | - | high | int | - | - | 1000.0 | 1.0 | 0.0 | - | - | Korrektur des horizontalen Radarsensorwinkels nach Verbauort Vorne Links (VL) |
ARG_0X4016_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SLAVE_QUANTITY | 0-n | high | unsigned char | - | TAB_ANZAHL_SLAVES | - | - | - | - | - | - |
ARG_0XA101_R
Dimensions: 4 rows × 14 columns
| ARG | STR | STPR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIMMUNG | + | - | - | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | 0.0 | 255.0 | Setzen des Dimmungswertes |
| LED_LH | + | - | 0-n | high | unsigned char | - | TAB_LED_XH | - | - | - | - | - | Setzen der LED im linken Spiegel |
| LED_RH | + | - | 0-n | high | unsigned char | - | TAB_LED_XH | - | - | - | - | - | Setzen der LED im rechten Spiegel |
| ANSTEUERZEIT | + | - | s | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | 0.0 | 255.0 | Setzen der Ansteuerzeit |
ARG_0XA162_R
Dimensions: 1 rows × 14 columns
| ARG | STR | STPR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RADAR_HF_MODUS | + | - | 0-n | high | unsigned char | - | TAB_RADAR_HF_MODUS | - | - | - | - | - | Setzen der Radarabstrahlung HF Modus |
ARG_0XA163_R
Dimensions: 4 rows × 14 columns
| ARG | STR | STPR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| INTENSITAETSSTUFE | + | - | 0-n | high | unsigned char | - | TAB_INTENSITAETSSTUFE | - | - | - | - | - | Setzen der Intensitätsstufestufe |
| MUSTER_LENKRAD | + | - | 0-n | high | unsigned char | - | TAB_MUSTER_LENKRAD | - | - | - | - | - | Setzen des Musters |
| RICHTUNG | + | - | 0-n | high | unsigned char | - | TAB_RICHTUNG | - | - | - | - | - | Setzen der Richtung |
| ANSTEUERZEIT | + | - | s | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | 0.0 | 255.0 | Setzen der Ansteuerzeit |
ARG_0XD9E4_D
Dimensions: 1 rows × 12 columns
| ARG | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | MIN | MAX | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ANZAHL_RADARSENSORZIELE_SETZEN | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | 0.0 | 5000.0 | Setzen der notwenige Radarsensorziele für Servicejustageprozess |
BETRIEBSMODE
Dimensions: 6 rows × 3 columns
| WERT | TEXT | BEDEUTUNG |
|---|---|---|
| 0x00 | Allgemeiner Fertigungs- und Energiesparmode | Hier deaktivierte Funktionen gemäß FeTra-Liste festhalten |
| 0x01 | Spezieller Energiesparmode | - |
| 0x02 | ECOS-Mode | - |
| 0x03 | MOST-Mode | - |
| 0x04 | Rollenmode | - |
| 0xFF | ungültiger Betriebsmode | ungültig |
ENERGIESPARMODE_DOP
Dimensions: 4 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Normalmode |
| 1 | Fertigungsmode |
| 2 | Transportmode |
| 3 | Flashmode |
EXTENDED_ENERGY_MODE_DOP
Dimensions: 16 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Erweiterter Betriebsmodus nicht gesetzt |
| 1 | Erweiterter Betriebsmodus 1 |
| 2 | Erweiterter Betriebsmodus 2 |
| 3 | Erweiterter Betriebsmodus 3 |
| 4 | Erweiterter Betriebsmodus 4 |
| 5 | Erweiterter Betriebsmodus 5 |
| 6 | Erweiterter Betriebsmodus 6 |
| 7 | Erweiterter Betriebsmodus 7 |
| 8 | Erweiterter Betriebsmodus 8 |
| 9 | Erweiterter Betriebsmodus 9 |
| 10 | Erweiterter Betriebsmodus 10 |
| 11 | Erweiterter Betriebsmodus 11 |
| 12 | Erweiterter Betriebsmodus 12 |
| 13 | Erweiterter Betriebsmodus 13 |
| 14 | Erweiterter Betriebsmodus 14 |
| 15 | Erweiterter Betriebsmodus 15 |
FDETAILSTRUKTUR
Dimensions: 6 rows × 2 columns
| NAME | TYP |
|---|---|
| F_UWB_ERW | ja |
| SAE_CODE | nein |
| F_HLZ | nein |
| F_SEVERITY | nein |
| F_UWB_SATZ | 2 |
| F_HLZ_VIEW | - |
FEHLERKLASSE_DOP
Dimensions: 4 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Keine Fehlerklasse verfuegbar |
| 1 | Ueberpruefung beim naechsten Werkstattbesuch |
| 2 | Ueberpruefung beim naechsten Halt |
| 4 | Ueberpruefung sofort erforderlich |
FORTTEXTE
Dimensions: 122 rows × 4 columns
| ORT | ORTTEXT | EREIGNIS_DTC | FEHLERKLASSE |
|---|---|---|---|
| 0x020800 | Energiesparmode aktiv | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. RS01 is executing application in assembly-, transport- and flashing energy saving mode. |
| 0x020808 | Codierung: Steuergerät ist nicht codiert | 0 | Der Fehler ist gespeichert, wenn ein fabrikneues Steuergerät noch nicht kodiert wurde oder wenn ein Problem mit den Kodierdaten vorliegt. |
| 0x020809 | Codierung: Fehler bei Codierdatentransaktion aufgetreten | 0 | Der Fehler wird gespeichert, wenn die Verbindung zum Steuergerät unterbrochen wurde (z.B. Leitungsunterbrechung). Der Fehler wird auch gespeichert, wenn eine Kodierung nicht erfolgreich abgeschlossen wurde. In diesen Fällen sind noch weitere Fehler gespeichert, die die Kodierung betreffen. |
| 0x02080A | Codierung: Signatur der Codierdaten ungültig | 0 | Die Kodierdaten werden über einen Sicherheitsschlüssel gesichert (sogenannte Signatur). Der Fehler wird gespeichert, wenn die Kodierdaten keine gültige Signatur aufweisen. Mögliche Fehlerursache: - Kodierversuch mit nicht gültigen Kodierdaten. - unzulässige manipulation von Kodierdaten |
| 0x02080B | Codierung: Codierdaten passen nicht zum Fahrzeug | 0 | Der Fehler wird eingetragen, wenn ein bereits kodiertes Steuergerät aus einem anderen Fahrzeug eingebaut wurde. Nach Zündung ein vergleicht das Steuergerät die gespeicherte Fahrzeuggestellnummer (Kodierprüfstempel) mit der auf dem Bus gesendeten Fahrgestellnummer. Der Fehler wird gespeichert, wenn bei dieser Prüfung eine Unstimmigkeit festgestellt wird. Typischerweise für Fehler nach einem Kreuztausch (gebrauchtes Ersatzteil). |
| 0x02080C | Codierung: Unplausible Daten während Codierdatentransaktion | 0 | Die Kodierdaten sind unvollständig oder fehlerhaft. Das Kodierdatenpaket muss neu erstellt werden. Achtung: Diesen Fehler nicht für Checksumme EEPROM verwenden. Für diesen Fehler den Fehler CODING_EVENT_STORAGE_ERROR eintragen. |
| 0x02080D | Codierung: Codierdaten nicht qualifiziert | 0 | Verhalten sich Steuergeräte-Applikationen in Abhängigkeit der Nettocodierdaten-Zustände NCDState=unqualified und NCDState=qualified unterschiedlich, muss unter Einhaltung der Anforderung FP4_6642 der Fehlerspeichereintrag CODING_EVENT_UNQUALIFIED_DATA aktiv gesetzt werden. Bei Steuergeräten, die dies nicht betrifft, darf der Fehlerspeichereintrag CODING_EVENT_UNQUALIFIED_DATA nicht aktiv gesetzt werden. |
| 0x020823 | Flash Memory Fehler (Sammelfehler) | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Code flash memory checksum failure on host (FG4) shall cause this DTC to set. The checksum for code flash memory shall be calculated one time at power up. |
| 0x020826 | Hardwarefehler (Sammelfehler) | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x020829 | Softwarefehler (Sammelfehler) | 0 | DTC kann bei Fehler geetzt werden Autosar Failure Events defined by BMW. Either of the following conditions can set this error: - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x02FF08 | Dummy-Fehlerspeichereintrag im Komponentenfehlerbereich nur für Testzwecke | 1 | CC-Meldung bei Fehler geschickt, used for DM testing |
| 0x481CBB | Master-Slave - Hardwarefehler - hinten links Slave | 0 | Fehlersetzbedingung: DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CBC | Master-Slave - Hardwarefehler - Seite links Slave | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CBD | Master-Slave - Hardwarefehler Seite rechts Slave | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CBE | Master-Slave - Hinten links Slave nicht verbaut | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CBF | Master-Slave - Seite links Slave nicht verbaut | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC0 | Master-Slave - Seite rechts Slave nicht verbaut | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC2 | Software - Inkompatible Software innerhalb System | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC3 | Hardware - Inkompatible Hardware innerhalb System | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC4 | Inbetriebnahme - Systemfestschreibung noch nicht durchgeführt | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. DTC is set when Master-Slave system boots up and Master was not yet converged with the Slaves in the system. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC5 | Variantencodierung - Falsche Verbauvariante | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC6 | PR-CAN - Control Module Bus OFF | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CC8 | Funktionsabbruch - Falscher Betriebsmodus | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - The operating mode of the radar is neither Objektlisten für FAS Aktiv / SWW Aktiv nor SWW Aktiv [ (CTR_OPRMOD_RADA. CTR_OPRMOD_RS != 0x2) && (CTR_OPRMOD_RADA. CTR_OPRMOD_RS != 0x3) ] |
| 0x481CD0 | Funktionsfehler - Dejustage - Hinten Links | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CE0 | Funktionsfehler - Dejustage - Hinten Rechts | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CE4 | Funktionsfehler - Dejustage - Seite Links | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0x481CED | Funktionsabbruch - Blindheit - Seite Links | 1 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING Radar can be blocked by build-up of a wet layer of material on the radar radome or secondary surface (e.g., water, slush, mud, etc.). For the blockage detection function, the radar sensor incorporates a dedicated blockage antenna with beam aimed at the road surface. The signal return in the blockage beam is analyzed to determine if the radar is blocked. In addition to the magnitude of the road surface, other parameters will be computed for each dwell of the blockage antenna including the background noise level and persistence flags. Blockage detection is accomplished by comparing the long term average of blockage detection parameters with corresponding blockage detection thresholds. |
| 0x481CEF | Funktionsabbruch - Blindheit - Hinten Links | 1 | DTC kann bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING Radar can be blocked by build-up of a wet layer of material on the radar radome or secondary surface (e.g., water, slush, mud, etc.). For the blockage detection function, the radar sensor incorporates a dedicated blockage antenna with beam aimed at the road surface. The signal return in the blockage beam is analyzed to determine if the radar is blocked. In addition to the magnitude of the road surface, other parameters will be computed for each dwell of the blockage antenna including the background noise level and persistence flags. Blockage detection is accomplished by comparing the long term average of blockage detection parameters with corresponding blockage detection thresholds. |
| 0x481CF0 | Funktionsabbruch - Blindheit - Hinten Rechts | 1 | DTC kann bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING Radar can be blocked by build-up of a wet layer of material on the radar radome or secondary surface (e.g., water, slush, mud, etc.). For the blockage detection function, the radar sensor incorporates a dedicated blockage antenna with beam aimed at the road surface. The signal return in the blockage beam is analyzed to determine if the radar is blocked. In addition to the magnitude of the road surface, other parameters will be computed for each dwell of the blockage antenna including the background noise level and persistence flags. Blockage detection is accomplished by comparing the long term average of blockage detection parameters with corresponding blockage detection thresholds. |
| 0x481CF1 | Spannungsversorgung - Lokale Unterspannung | 0 | Ein interner Fehler, der ebefalls als Folge einer Überspannung auftreten könnte (z.B. Sensor- oder Aktuartorfehler), ist am Steuergerät aufgetreten während lokaler Unterspannung. Die Unterspannung wurde an der Steuergeräte-Klemme gemessen. |
| 0x481CF2 | Funktionsabbruch - Blindheit - Seite Rechts | 1 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING Radar can be blocked by build-up of a wet layer of material on the radar radome or secondary surface (e.g., water, slush, mud, etc.). For the blockage detection function, the radar sensor incorporates a dedicated blockage antenna with beam aimed at the road surface. The signal return in the blockage beam is analyzed to determine if the radar is blocked. In addition to the magnitude of the road surface, other parameters will be computed for each dwell of the blockage antenna including the background noise level and persistence flags. Blockage detection is accomplished by comparing the long term average of blockage detection parameters with corresponding blockage detection thresholds. |
| 0x481CF3 | Spannungsversorgung - Globale Überspannung extern | 1 | Ein externer Fehler (z.B. ein Netzwerkfehler) ist am Steuergerät aufgetreten, während globaler Überspannung. Die Überspannung wurde über die Botschaft: Fehlerspeicher Bordnetzspannung vom AEP festgestellt. |
| 0x481CF4 | Spannungsversorgung - Globale Überspannung intern | 1 | Ein interner Fehler, der ebefalls als Folge einer Überspannung auftreten könnte (z.B. Sensor- oder Aktuartorfehler), ist am Steuergerät aufgetreten, während globaler Überspannung. Die Überspannung wurde über die Botschaft: Fehlerspeicher Bordnetzspannung vom AEP festgestellt. |
| 0x481CF5 | Spannungsversorgung - Globale Unterspannung extern | 1 | Ein externer Fehler (z.B. ein Netzwerkfehler) ist am Steuergerät aufgetreten, während globaler Unterspannung. Die Unterspannung wurde über die Botschaft: Fehlerspeicher Bordnetzspannung vom AEP festgestellt. |
| 0x481CF6 | Spannungsversorgung - Globale Unterspannung intern | 1 | Ein interner Fehler, der ebefalls als Folge einer Unterspannung auftreten könnte (z.B. Sensor- oder Aktuartorfehler), ist am Steuergerät aufgetreten, während globaler Unterspannung. Die Unterspannung wurde über die Botschaft: Fehlerspeicher Bordnetzspannung vom AEP festgestellt. |
| 0x481CF8 | Spannungsversorgung - Lokale Überspannung | 0 | Ein interner Fehler, der ebefalls als Folge einer Unterspannung auftreten könnte (z.B. Sensor- oder Aktuartorfehler), ist am Steuergerät aufgetreten während lokaler Überspannung. Die Überspannung wurde an der Steuergeräte-Klemme gemessen. |
| 0x481CFB | Funktionsfehler - Dejustage - Seite Rechts | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB0514 | B2-CAN Control Module Bus OFF | 0 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB0BFF | Dummy-Fehlerspeichereintrag im Netzwerkfehlerbereich nur für Testzwecke | 1 | CC-Meldung bei Fehler geschickt |
| 0xCB0C00 | FAS-CAN Rechts Control Module Bus OFF | 0 | DTC kann nur bei SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - CAN Error counter on the Host Micro of RSR exceeds threshold for BUS OFF (255) |
| 0xCB0C02 | FAS-CAN Links Control Module Bus OFF | 0 | DTC kann nur SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - CAN Error counter on the Host Micro of RSL and HC2L exceeds threshold for BUS OFF (255) |
| 0xCB1428 | Botschaftsfehler (Außentemperatur, ID: A_TEMP) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB142C | Signalfehler (Außentemperatur, ID: A_TEMP) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB144E | Signalfehler (Fahrgestellnummer, ID: FAHRGESTELLNUMMER) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - The master sensor received an invalid signal while being commanded to return the sensor's serial number. |
| 0xCB1450 | Signalfehler (Blinken, ID: BLINKEN) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1451 | Botschaftsfehler (Blinken, ID: BLINKEN) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14A9 | Botschaftsfehler (Fehlerspeicher Bordnetz Spannung, ID: ERRM_BN_U) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - A timeout occurred while the master sensor was waiting for the result of monitoring the voltage of the internal error memory. |
| 0xCB14AA | Signalfehler (Fehlerspeicher Bordnetz Spannung, ID: ERRM_BN_U) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - The master sensor received an invalid signal while monitoring the voltage of the internal error memory. |
| 0xCB14AB | Signalfehler (Fehlerspeicher Bordnetz Spannung, ID: ERRM_BN_U) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - The master sensor received an undefined signal while waiting to monitoring the voltage of the internal error memory. |
| 0xCB14AC | Botschaftsfehler (Fahrzeugzustand, ID: FZZSTD) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14B0 | Signalfehler (Fahrzeugzustand, ID: FZZSTD) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14B8 | Botschaftsfehler (Geschwindigkeit Fahrzeug, ID: V_VEH) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14BE | Signalfehler (Geschwindigkeit Fahrzeug, ID: V_VEH) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14C2 | Botschaftsfehler (Giergeschwindigkeit Fahrzeug, ID: VYAW_VEH) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14C8 | Signalfehler (Giergeschwindigkeit Fahrzeug, ID: VYAW_VEH) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14F2 | Botschaftsfehler (Kilometerstand/Reichweite, ID: KILOMETERSTAND) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14F6 | Signalfehler (Kilometerstand/Reichweite, ID: KILOMETERSTAND) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB14FF | Botschaftsfehler (Zustand Fahrzeug, ID: CON_VEH) Checksumme | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1526 | Signalfehler (Lenkwinkel Vorderachse Effektiv, ID: STEA_FTAX_EFFV) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - Steering Angle invalid for 5 cycles In case of ((STEA_FTAX_EFFV.STEA_FTAX_EFFV == 0xFFFF) || (STEA_FTAX_EFFV.QU_STEA_FTAX_EFFV == 0xF ) || (STEA_FTAX_EFFV.ALIV_STEA_FTAX_EFFV == 0xF ) || (STEA_FTAX_EFFV.STEA_FTAX_EFFV_ERR_AMP == 0xFFFF )), the DTC_EVENT_SIGNAL_INVALID__STEA_FTAX_EFFV shall be set |
| 0xCB1565 | Botschaftsfehler (Zustand Fahrzeug, ID: CON_VEH) Alive | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15A0 | Botschaftsfehler (Status Anhänger, ID: STAT_ANHAENGER) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_Trailer dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15A4 | Signalfehler (Status Anhänger, ID: STAT_ANHAENGER) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_Trailer dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15A5 | Signalfehler (Status Anhänger, ID: STAT_ANHAENGER) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_Trailer dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15AC | Botschaftsfehler (Status Bedienelement Bremsassistent, ID: ST_OPEL_BRAS) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15B0 | Signalfehler (Status Bedienelement Bremsassistent, ID: ST_OPEL_BRAS) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15B1 | Signalfehler (Status Bedienelement Bremsassistent, ID: ST_OPEL_BRAS) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB15FC | Botschaftsfehler (Status Helligkeit Umgebung, ID: BRIG_SRR) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB160C | Botschaftsfehler (Zustand Fahrzeug, ID: CON_VEH) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1637 | Botschaftsfehler (Geschwindigkeit Fahrzeug 2 ID:V_VEH_2) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1640 | Signalfehler (Geschwindigkeit Fahrzeug 2 ID:V_VEH_2) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1641 | Signalfehler (Status Helligkeit Umgebung, ID: BRIG_SRR) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB165E | Signalfehler (Zustand Fahrzeug, ID: CON_VEH) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_Trailer dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1858 | Signalfehler (Zustand Fahrzeug, ID: CON_VEH) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB18AC | Signalfehler (Status Fahrlicht, ID: STAT_FAHRLICHT) Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - Signal error received at the master sensor when commanded to determine the qualifier associated with the status of the auto's headlight. |
| 0xCB18D7 | Botschaftsfehler (Status Fahrlicht, ID: STAT_FAHRLICHT) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - Message error at the masters sensor, timeout achieved when trying to determine the status of the auto's headlight. |
| 0xCB18D9 | Signalfehler (Status Fahrlicht, ID: STAT_FAHRLICHT) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB18DA | Signalfehler (Status Fahrlicht, ID: STAT_FAHRLICHT) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1966 | Signalfehler (Status Verbrennungsmotor, ID: ST_CENG) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB19B7 | Botschaftsfehler (Dimmung, ID: DIMMUNG) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB19B9 | Signalfehler (Dimmung, ID: DIMMUNG) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB19CC | Botschaftsfehler (Status Verbrennungsmotor, ID: ST_CENG) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB19DF | Botschaftsfehler (Relativzeit BN2020, ID: RELATIVZEIT) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1A38 | Signalfehler (Status Verbrennungsmotor, ID: ST_CENG) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1A3E | Signalfehler (Geschwindigkeit Fahrzeug, ID: V_VEH) - Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1A3F | Signalfehler (Giergeschwindigkeit Fahrzeug, ID: VYAW_VEH) - Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1A4B | Botschaftsfehler (Status Verbrennungsmotor, ID: ST_CENG) Alive | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1A8C | Botschaftsfehler (Geschwindigkeit Fahrzeug 2 ID:V_VEH_2) Checksumme | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1AD3 | Signalfehler (Geschwindigkeit Fahrzeug 2 ID:V_VEH_2) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1AE9 | Signalfehler (Relativzeit BN2020, ID: RELATIVZEIT) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1B36 | Botschaftsfehler (Lenkwinkel Vorderachse Effektiv, ID: STEA_FTAX_EFFV) - Timeout | 1 | DTC shall set on 5 consecutive missing messages DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - In case of a timeout of this message, the DTC_EVENT_TIMEOUT_MESSAGE__STEA_FTAX_EFFV shall be set. |
| 0xCB1B37 | Botschaftsfehler (Lenkwinkel Vorderachse Effektiv, ID: STEA_FTAX_EFFV) - Checksumme | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - DTC shall set on 5 consecutive occurrances of incorrect application CRC in CRC_STEA_FTAX_EFFV signal of STEA_FTAX_EFFV message. In case of an alive counter issue in this message, the event DTC_EVENT_ALIVE_MESSAGE__STEA_FTAX_EFFV shall be set |
| 0xCB1B38 | Botschaftsfehler (Lenkwinkel Vorderachse Effektiv, ID: STEA_FTAX_EFFV) - Alive | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - DTC shall set on 5 consecutive occurrances of alive counter not having consective values (value incremented by 1 from previous received value) on ALIV_STEA_FTAX_EFFV signal of STEA_FTAX_EFFV message. |
| 0xCB1C1B | Botschaftsfehler (Status Energieerzeugung, ID: ST_ENERG_GEN) - Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1C98 | Botschaftsfehler (Status Anzeige Fahrerassistenzsystem, ID: ST_DISP_DRASY) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1CA6 | Botschaftsfehler (Fahrbahn-Geometrie, ID: RDGM) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_KAFAS dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1CAD | Botschaftsfehler (Steuerung Betriebsmodus Radar, ID: CTR_OPRMOD_RADA) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1CD9 | Botschaftsfehler (Takt Zähler Synchronisation CAN, ID:CCLK_COU_SYNCN_CAN) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - In case of a timeout of this message, the event DTC_EVENT_TIMEOUT_MESSAGE__CCLK_COU_SYNCN_CAN shall be set. |
| 0xCB1CDA | Botschaftsfehler (Takt Zähler Synchronisation Nachlauf, ID:CCLK_COU_SYNCN_FFLUP) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING - In case of a timeout of this message, the event DTC_EVENT_TIMEOUT_MESSAGE__CCLK_COU_SYNCN_FLLUP shall be set. |
| 0xCB1CDB | Botschaftsfehler (Rückmeldung Vibration Lenkrad Anzeige Außenspiegel, ID:FDBK_VIB_STW_DISP_EXMI) Timeout | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING - In case of a timeout of this message, the event DTC_EVENT_TIMEOUT_MESSAGE__FDBK_VIB_STW_DISP_EXMI shall be set. |
| 0xCB1D16 | Botschaftsfehler (Steuerung Betriebsmodus Radar, ID: CTR_OPRMOD_RADA) Alive | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1D2A | Botschaftsfehler (Fahrbahn-Geometrie, ID: RDGM) Alive | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_KAFAS dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1D7D | Signalfehler (Status Anzeige Fahrerassistenzsystem, ID: ST_DISP_DRASY) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1D85 | Signalfehler (Rückmeldung Vibration Lenkrad Anzeige Außenspiegel, ID:FDBK_VIB_STW_DISP_EXMI) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1D8A | Signalfehler (Takt Zähler Synchronisation CAN, ID:CCLK_COU_SYNCN_CAN) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1D9A | Signalfehler (Takt Zähler Synchronisation Nachlauf, ID:CCLK_COU_SYNCN_FFLUP) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1DC0 | Signalfehler (Status Anzeige Fahrerassistenzsystem, ID: ST_DISP_DRASY) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1DC9 | Signalfehler (Takt Zähler Synchronisation CAN, ID:CCLK_COU_SYNCN_CAN) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1DD3 | Signalfehler (Takt Zähler Synchronisation Nachlauf, ID:CCLK_COU_SYNCN_FFLUP) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1DD7 | Signalfehler (Rückmeldung Vibration Lenkrad Anzeige Außenspiegel, ID:FDBK_VIB_STW_DISP_EXMI) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1DEA | Signalfehler (Fahrbahn-Geometrie, ID: RDGM) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_KAFAS dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1E1A | Signalfehler (Geschwindigkeit Fahrzeug 2 ID:V_VEH_2) Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1EDF | Signalfehler (Steuerung Betriebsmodus Radar, ID: CTR_OPRMOD_RADA) Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1F15 | Signalfehler (Steuerung Betriebsmodus Radar, ID: CTR_OPRMOD_RADA) Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1F36 | Signalfehler (Rückmeldung Vibration Lenkrad Anzeige Außenspiegel, ID:FDBK_VIB_STW_DISP_EXMI) Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1F54 | Signalfehler (Fahrbahn-Geometrie, ID: RDGM) Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_KAFAS dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1F70 | Botschaftsfehler (Steuerung Betriebsmodus Radar, ID: CTR_OPRMOD_RADA) Checksumme | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB1F73 | Botschaftsfehler (Fahrbahn-Geometrie, ID: RDGM) Checksumme | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the signal C_VAR_KAFAS dependant - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB2C05 | Signalfehler (Außentemperatur, ID: A_TEMP) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB2C0A | Signalfehler (Blinken, ID: BLINKEN) - Undefiniert | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. CC-Meldung wird nur bei aktivierter Spurwechselwarnung verschickt. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB2C44 | Signalfehler (Status Energieerzeugung, ID: ST_ENERG_GEN) - Ungültig | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING |
| 0xCB2C65 | Signalfehler (Lenkwinkel Vorderachse Effektiv, ID: STEA_FTAX_EFFV) - Qualifier | 1 | DTC kann nur bei SA_5AS oder SA_5AT eingetragen werden. Either of the following conditions can set this error: - When there is a fault with the Bordnetz voltage (CTR_ERRM_BN_U dependant) - When there is a fault in the monitoring of the voltage internal to the sensor (Local_HI_LO_Voltage dependant) - When there is a bus error with the B2 CAN (B2CAN_BUS_ERROR dependant) - When there is an error with the status_dynometer-mode (ST_DYNOMOD dependant) - MFA_EVENT_TIMER_RUNNING - DTC shall set of 5 consective occurrances of value 0xB on signal QU_STEA_FTAX_EFFV of STEA_FTAX_EFFV message. |
| 0xFFFFFF | unbekannter Fehlerort | 0 | - |
FUMWELTTEXTE
Dimensions: 13 rows × 9 columns
| UWNR | UWTEXT | UW_EINH | L/H | UWTYP | NAME | MUL | DIV | ADD |
|---|---|---|---|---|---|---|---|---|
| 0x0001 | KALTSTART_VORHANDEN | 0/1 | High | 0x01 | - | - | - | - |
| 0x0002 | MSA_START_VORHANDEN | 0/1 | High | 0x02 | - | - | - | - |
| 0x0003 | MOTOR_LAEUFT | 0/1 | High | 0x04 | - | - | - | - |
| 0x0004 | GLOBALE_BITS_VORHANDEN | 0/1 | High | 0x08 | - | - | - | - |
| 0x1750 | F_UW_BN | - | High | unsigned char | - | 1.0 | 1.0 | 0.0 |
| 0x1751 | F_UW_TN | Text | High | 3 | - | 1.0 | 1.0 | 0.0 |
| 0x2805 | STAT_AUSSENTEMPERATUR_WERT | °C | High | signed char | - | 1.0 | 1.0 | 0.0 |
| 0x2863 | USP_STATUS_GENERATORENTLASTUNG | 0-n | High | 0xFF | TAB_ENTLASTUNG_GENERATOR | - | - | - |
| 0x2866 | STAT_BETRIEBSSPANNUNG_WERT | V | High | unsigned char | - | 8.0 | 100.0 | 0.0 |
| 0x2867 | STAT_FAHRZEUGGESCHWINDIGKEIT_WERT | km/h | High | unsigned char | - | 1.0 | 1.0 | 0.0 |
| 0x2898 | USP_DTC_URSAECHLICHER_FEHLER_4BYTE | HEX | High | signed long | - | - | - | - |
| 0x28A6 | Sub-Tabelle | 0/1 | - | 0xFF | - | - | - | - |
| 0xXYXY | unbekannte Umweltbedingung | - | - | - | - | - | - | - |
IDETAILSTRUKTUR
Dimensions: 5 rows × 2 columns
| NAME | TYP |
|---|---|
| F_UWB_ERW | ja |
| SAE_CODE | nein |
| F_HLZ | nein |
| F_SEVERITY | nein |
| F_UWB_SATZ | 2 |
IORTTEXTE
Dimensions: 1 rows × 4 columns
| ORT | ORTTEXT | EREIGNIS_DTC | FEHLERKLASSE |
|---|---|---|---|
| 0xFFFFFF | unbekannter Fehlerort | 0 | - |
IUMWELTTEXTE
Dimensions: 1 rows × 9 columns
| UWNR | UWTEXT | UW_EINH | L/H | UWTYP | NAME | MUL | DIV | ADD |
|---|---|---|---|---|---|---|---|---|
| 0xXYXY | unbekannte Umweltbedingung | - | - | - | - | - | - | - |
JOBRESULTEXTENDED
Dimensions: 1 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xXY | ERROR_UNKNOWN |
PC
Dimensions: 12 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | reserved |
| 1 | Hardware (Elektronik) |
| 2 | Hardwareausprägung |
| 3 | Hardwarefarbe |
| 5 | Codierdaten CAF |
| 6 | Bootloader |
| 7 | Flashloader |
| 8 | Software ECU-Speicherimage |
| 9 | Flash File SW |
| 10 | Prüfsoftware |
| 11 | Programmiersystem |
| 12 | Interaktive Betriebsanleitung Daten |
PROG_DEP_DOP
Dimensions: 6 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | reserved |
| 1 | correctResult |
| 2 | incorrectResult |
| 3 | incorrectResult error SWE - HWE |
| 4 | incorrectResult error SWE - SWE |
| 255 | reserved |
RDBI_ADS_DOP
Dimensions: 8 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | ISOSAEReserved_00 |
| 1 | defaultSession |
| 2 | programmingSession |
| 3 | extendedDiagnosticSession |
| 4 | safetySystemDiagnosticSession |
| 64 | vehicleManufacturerSpecific_40 |
| 65 | codingSession |
| 66 | SWTSession |
RDBI_PC_PCS_DOP
Dimensions: 3 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | ECUMehrmalsProgrammierbar |
| 1 | ECUMindestensEinmalVollstaendigProgrammierbar |
| 2 | ECUNichtMehrProgrammierbar |
RDTCI_LEV_DOP
Dimensions: 9 rows × 2 columns
| WERT | TEXT |
|---|---|
| 2 | reportDTCByStatusMask |
| 4 | reportDTCsnapshotRecordByDTCnumber |
| 6 | reportDTCextendedDataRecordByDTCnumber |
| 7 | reportNumberOfDTCbySeverityMaskRecord |
| 8 | reportDTCbySeverityMaskRecord |
| 9 | reportSeverityInformationOfDTC |
| 10 | reportSupportedDTC |
| 18 | reportNumberOfEmissionsRelatedOBDDTCByStatusMask |
| 19 | reportEmissionsRelatedOBDDTCByStatusMask |
RES_0X2502_D
Dimensions: 3 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_RESERVE_WERT | - | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | Reserve. Konstante = 0x00 |
| STAT_PROG_ZAEHLER_STATUS | 0-n | high | unsigned char | - | RDBI_PC_PCS_DOP | - | - | - | ProgrammingCounterStatus |
| STAT_PROG_ZAEHLER_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | ProgrammingCounter |
RES_0X2504_D
Dimensions: 6 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_ERASE_MEMORY_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | EraseMemoryTime, maximale SWE-Löschzeit mit Ablaufkontrolle im Steuergerät. |
| STAT_CHECK_MEMORY_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | CheckMemoryTime (Bsp.: Signaturprüfung), maximale Speicherprüfzeit mit Ablaufkontrolle im Steuergerät. |
| STAT_BOOTLOADER_INSTALLATION_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | BootloaderInstallationTime Die Zeit, die nach dem Reset benötigt wird, damit der Hilfsbootloader gestartet wird, den Bootloader löscht, den neuen Bootloader kopiert, dessen Signatur prüf und der neue Bootloader gestartet wird bis er wieder diagnosefähig ist. Angabe ist verpflichtend für alle Steuergeräte, auch wenn das Steuergerät keinen Bootloader Update geplant hat. Ein Wert von 0x0000 ist verboten. |
| STAT_AUTHENTICATION_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | AuthenticationTime, die maximale Zeit, die das Steuergerät zur Prüfung der Authentisierung (sendKey) benötigt mit Ablaufkontrolle im Steuergerät. |
| STAT_RESET_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | ResetTime Die Zeitangabe bezieht sich auf den Übergang von der ApplicationExtendedSesssion in die ProgrammingSession bzw. bei Übergang von der ProgrammingSession in die DefaultSession. Es ist der Maximalwert auszugeben. Nach Ablauf der ResetTime ist das Steuergerät durch Diagnose ansprechbar. |
| STAT_TRANSFER_DATA_TIME_WERT | s | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | TransferDataTime Die Angabe hat sich zu beziehen auf einen TransferData mit maximaler Blocklänge auf die Zeitspanne vom vollständigen Empfang der Daten im Steuergerät über das ggf. erforderliche Dekomprimieren und dem vollständigen Speichern im nichtflüchtigen Speicher bis einschließlich dem Senden der positiven Response. |
RES_0X4006_R
Dimensions: 1 rows × 13 columns
| RESULTNAME | STR | STPR | RRR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STAT_RAM_DATEN_SCHREIBEN | - | - | + | 0-n | high | unsigned char | - | STATUS_RAM_DATEN_SCHREIBEN_TAB | - | - | - | Status RAM_DATEN_SCHREIBEN |
RES_0X4010_D
Dimensions: 20 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_HW_RR_DATA | DATA | high | data[1] | - | - | 1.0 | 1.0 | 0.0 | Delphi_HW_Version_Sensor_hinten_rechts (RR) |
| STAT_HW_RL_DATA | DATA | high | data[1] | - | - | 1.0 | 1.0 | 0.0 | Delphi HW Version Sensor hinten links (HL) |
| STAT_HW_FR_DATA | DATA | high | data[1] | - | - | 1.0 | 1.0 | 0.0 | Delphi HW Version Sensor vorne rechts (VR) |
| STAT_HW_FL_DATA | DATA | high | data[1] | - | - | 1.0 | 1.0 | 0.0 | Delphi HW Version Sensor vorne links (VL) |
| STAT_PCAN_RR_DATA | DATA | high | data[2] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version PCAN Version |
| STAT_PCAN_RL_DATA | DATA | high | data[2] | - | - | 1.0 | 1.0 | 0.0 | - |
| STAT_PCAN_FR_DATA | DATA | high | data[2] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version PCAN Version |
| STAT_PCAN_FL_DATA | DATA | high | data[2] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version PCAN Version |
| STAT_HOST_RR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version Host |
| STAT_HOST_RL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version Host |
| STAT_HOST_FR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version Host |
| STAT_HOST_FL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version Host |
| STAT_ARM_RR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version ARM |
| STAT_ARM_RL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version ARM |
| STAT_ARM_FR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version ARM |
| STAT_ARM_FL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version ARM |
| STAT_DSP_RR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version DSP |
| STAT_DSP_RL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version DSP |
| STAT_DSP_FR_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version DSP |
| STAT_DSP_FL_DATA | DATA | high | data[3] | - | - | 1.0 | 1.0 | 0.0 | Delphi Sensor Version SW Version DSP |
RES_0XA101_R
Dimensions: 1 rows × 13 columns
| RESULTNAME | STR | STPR | RRR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STAT_ROUTINE | + | - | + | 0-n | high | unsigned char | - | TAB_STATUS_ROUTINE | - | - | - | Status routine |
RES_0XA161_R
Dimensions: 1 rows × 13 columns
| RESULTNAME | STR | STPR | RRR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STAT_ROUTINE | + | - | + | 0-n | high | unsigned char | - | TAB_STATUS_ROUTINE | - | - | - | Status Routine |
RES_0XA162_R
Dimensions: 2 rows × 13 columns
| RESULTNAME | STR | STPR | RRR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STAT_ROUTINE | + | - | + | 0-n | high | unsigned char | - | TAB_STATUS_ROUTINE | - | - | - | STATUS_ROUTINE |
| STAT_RADAR_HF_MODUS | - | - | + | 0-n | high | unsigned char | - | TAB_STATUS_RADAR_HF_MODUS | - | - | - | Status Radarabstrahlung HF Modus |
RES_0XA163_R
Dimensions: 1 rows × 13 columns
| RESULTNAME | STR | STPR | RRR | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STAT_ROUTINE | + | - | + | 0-n | high | unsigned char | - | TAB_STATUS_ROUTINE | - | - | - | Status routine |
RES_0XD9E2_D
Dimensions: 4 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_TEMPERATUR_SENSOR_VORNE_LINKS_WERT | °C | high | unsigned char | - | - | 1.0 | 1.0 | -40.0 | Ergebnisse der aktuellen, internen SG Temperatur nach Verbauort |
| STAT_TEMPERATUR_SENSOR_VORNE_RECHTS_WERT | °C | high | unsigned char | - | - | 1.0 | 1.0 | -40.0 | Ergebnisse der aktuellen, internen SG Temperatur nach Verbauort |
| STAT_TEMPERATUR_SENSOR_HINTEN_LINKS_WERT | °C | high | unsigned char | - | - | 1.0 | 1.0 | -40.0 | Ergebnisse der aktuellen, internen SG Temperatur nach Verbauort |
| STAT_TEMPERATUR_SENSOR_HINTEN_RECHTS_WERT | °C | high | unsigned char | - | - | 1.0 | 1.0 | -40.0 | Ergebnisse der aktuellen, internen SG Temperatur nach Verbauort |
RES_0XD9E3_D
Dimensions: 9 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_START_KALIBRIERUNG | 0/1 | high | unsigned char | - | - | - | - | - | Abfrage des Sensor Kalibrierstatus bezüglich der Sensorjustage Kalibrierung nicht gestartet: 0x00 Kalibrierung gestarted: 0x01 |
| STAT_ANZAHL_ERFASSTE_RADARZIELE_SENSOR_VORNE_LINKS_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | Anzahl der Radarziele, die im laufenden Justageprozesses berücksichtigt worden sind. Vorne links |
| STAT_ANZAHL_ERFASSTE_RADARZIELE_SENSOR_VORNE_RECHTS_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | Anzahl der Radarziele, die im laufenden Justageprozesses berücksichtigt worden sind. Vorne rechts |
| STAT_ANZAHL_ERFASSTE_RADARZIELE_SENSOR_HINTEN_LINKS_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | Anzahl der Radarziele, die im laufenden Justageprozesses berücksichtigt worden sind. Hinten links. |
| STAT_ANZAHL_ERFASSTE_RADARZIELE_SENSOR_HINTEN_RECHTS_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | Anzahl der Radarziele, die im laufenden Justageprozesses berücksichtigt worden sind. Hinten Rechts |
| STAT_PROZESSFORTSCHRITT_JUSTAGE_VORNE_LINKS_WERT | % | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | Prozentualer Prozessfortschritt der laufenden Justage, Sensor vorne links |
| STAT_PROZESSFORTSCHRITT_JUSTAGE_VORNE_RECHTS_WERT | % | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | Prozentualer Prozessfortschritt der laufenden Justage, Sensor vorne rechts |
| STAT_PROZESSFORTSCHRITT_JUSTAGE_HINTEN_LINKS_WERT | % | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | Prozentualer Prozessfortschritt der laufenden Justage, Sensor hinten links |
| STAT_PROZESSFORTSCHRITT_JUSTAGE_HINTEN_RECHTS_WERT | % | high | unsigned char | - | - | 1.0 | 1.0 | 0.0 | Prozentualer Prozessfortschritt der laufenden Justage, Sensor hinten rechts |
RES_0XD9E4_D
Dimensions: 1 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_ANZAHL_RADARSENSORZIELE_LESEN_WERT | - | high | unsigned int | - | - | 1.0 | 1.0 | 0.0 | Auslesen der notwenige Radarsensorziele für Servicejustageprozess |
RES_0XD9E5_D
Dimensions: 4 rows × 10 columns
| RESULTNAME | EINHEIT | L/H | DATENTYP | MASKE | NAME | MUL | DIV | ADD | INFO |
|---|---|---|---|---|---|---|---|---|---|
| STAT_SERIENNUMMER_SENSOR_VORNE_LINKS_DATA | DATA | high | data[16] | - | - | 1.0 | 1.0 | 0.0 | SG Seriennummer Verbauort Vorne Links |
| STAT_SERIENNUMMER_SENSOR_VORNE_RECHTS_DATA | DATA | high | data[16] | - | - | 1.0 | 1.0 | 0.0 | SG Seriennummer Verbauort Vorne Rechts |
| STAT_SERIENNUMMER_SENSOR_HINTEN_LINKS_DATA | DATA | high | data[16] | - | - | 1.0 | 1.0 | 0.0 | SG Seriennummer Verbauort Hinten Links |
| STAT_SERIENNUMMER_SENSOR_HINTEN_RECHTS_DATA | DATA | high | data[16] | - | - | 1.0 | 1.0 | 0.0 | SG Seriennummer Verbauort Hinten Rechts |
SG_FUNKTIONEN
Dimensions: 37 rows × 16 columns
| ARG | ID | RESULTNAME | INFO | EINHEIT | LABEL | L/H | DATENTYP | NAME | MUL | DIV | ADD | SG_ADR | SERVICE | ARG_TABELLE | RES_TABELLE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PROGRAMMING_COUNTER | 0x2502 | - | Programming-Counter | - | - | - | - | - | - | - | - | - | 22 | - | RES_0x2502_D |
| PROGRAMMING_COUNTER_MAX_VALUE | 0x2503 | STAT_PROG_MAX_WERT | maximalen Anzahl von Programmiervorgängen | - | - | high | unsigned int | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| FLASH_TIMING_PARAMETER | 0x2504 | - | Programmierspezifische Timing Parameter | - | - | - | - | - | - | - | - | - | 22 | - | RES_0x2504_D |
| MILE_KM_EEPROM | 0x2540 | STAT_MILE_KM_EEPROM_DATA | Im EEPROM abgelegter Kilometerstand. | DATA | - | high | data[3] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| RAM_DATEN_SCHREIBEN | 0x4006 | - | Dient dazu während der Inbetriebnahme angelernte applikative Daten in den nichtflüchtigen Speicher zu sichern. | - | - | - | - | - | - | - | - | - | 31 | - | RES_0x4006_R |
| STEUERN_AUSSENSPIEGEL_LED | 0xA101 | - | Ansteuern der Aussenspiegel LED durch HC2 | - | - | - | - | - | - | - | - | - | 31 | ARG_0xA101_R | RES_0xA101_R |
| SENSORVERBUND | 0xA161 | - | Anlernen der Einzelsensoren im Sensorverbund: Verbauort und Seriennummer | - | - | - | - | - | - | - | - | - | 31 | - | RES_0xA161_R |
| RADAR_HF_MODUS | 0xA162 | - | Setzen und Ablesen der Radarabstrahlung Modus | - | - | - | - | - | - | - | - | - | 31 | ARG_0xA162_R | RES_0xA162_R |
| STEUERN_LENKRAD_VIBRATION | 0xA163 | - | Ansteuern des Lenkradvibrationsakuators | - | - | - | - | - | - | - | - | - | 31 | ARG_0xA163_R | RES_0xA163_R |
| INTERNE_SG_TEMPERATUR | 0xD9E2 | - | Auslesen SG Interne Temperatur nach Verbauort | - | - | - | - | - | - | - | - | - | 22 | - | RES_0xD9E2_D |
| SENSOR_JUSTAGE | 0xD9E3 | - | Abfrage des Sensor Justagestatus. Status Rückmeldung: - Start der Justage ja/nein - Anzahl der Radarziele, die im laufenden Justageprozesses berücksichtigt worden sind. - Prozentualer Prozessfortschritt der laufenden Justage | - | - | - | - | - | - | - | - | - | 22 | - | RES_0xD9E3_D |
| JUSTAGE | 0xD9E4 | - | Setzen und Lesen der Anzahl der notwenige Radarsensorziele für Justageprozess | - | - | - | - | - | - | - | - | - | 22;2E | ARG_0xD9E4_D | RES_0xD9E4_D |
| SERIENNUMMER_LESEN_FUNKTIONAL | 0xD9E5 | - | SG Seriennummer | - | - | - | - | - | - | - | - | - | 22 | - | RES_0xD9E5_D |
| ACTIVE_DIAGNOSTIC_SESSION | 0xF186 | STAT_ACTIVE_DIAGNOSTIC_SESSION | activeDiagnosticSession | 0-n | - | high | unsigned char | RDBI_ADS_DOP | - | - | - | - | 22 | - | - |
| STATUS_AKTIVE_SENSOR_FEHLER_VORNE_LINKS | 0x4000 | STAT__DATA | Ergebnisse aktiver Fehler gemäß Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_AKTIVE_SENSOR_FEHLER_VORNE_RECHTS | 0x4001 | STAT__DATA | Ergebnisse aktiver Fehler gemäß Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_AKTIVE_SENSOR_FEHLER_HINTEN_LINKS | 0x4002 | STAT__DATA | Ergebnisse aktiver Fehler gemäß Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_AKTIVE_SENSOR_FEHLER_HINTEN_RECHTS | 0x4003 | STAT__DATA | Ergebnisse aktiver Fehler gemäß Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_ZUENDZYKLUS_SENSOR_FEHLER_VORNE_LINKS | 0x4004 | STAT__DATA | Ergebnisse permante Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_ZUENDZYKLUS_SENSOR_FEHLER_VORNE_RECHTS | 0x4005 | STAT__DATA | Ergebnisse permante Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_ZUENDZYKLUS_SENSOR_FEHLER_HINTEN_LINKS | 0x4006 | STAT__DATA | Ergebnisse permante Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_ZUENDZYKLUS_SENSOR_FEHLER_HINTEN_RECHTS | 0x4007 | STAT__DATA | Ergebnisse permante Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_HISTORISCHE_SENSOR_FEHLER_VORNE_LINKS | 0x4008 | STAT__DATA | Ergebnisse historischer Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_HISTORISCHE_SENSOR_FEHLER_VORNE_RECHTS | 0x4009 | STAT__DATA | Ergebnisse historischer Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_HISTORISCHE_SENSOR_FEHLER_HINTEN_LINKS | 0x400A | STAT__DATA | Ergebnisse historischer Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_HISTORISCHE_SENSOR_FEHLER_HINTEN_RECHTS | 0x400B | STAT__DATA | Ergebnisse historischer Fehler gemäß Sensor Nummer oder Verbauort eines bestimmten Sensors | DATA | - | high | data[32] | - | 1.0 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_RADAR_WINKELABWEICHUNG_HR | 0x400C | STAT__WERT | Auslesen der horizontalen Radarsensorwinkels nach Verbauort Hinten Rechts (HR) | ° | - | high | int | - | 0.0010 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_RADAR_WINKELABWEICHUNG_HL | 0x400D | STAT__WERT | Auslesen des horizontalen Radarsensorwinkels nach Verbauort Hinten Links (HL) | ° | - | high | int | - | 0.0010 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_RADAR_WINKELABWEICHUNG_VL | 0x400E | STAT__WERT | Auslesen des horizontalen Radarsensorwinkels nach Verbauort Vorne Links (VL) | ° | - | high | int | - | 0.0010 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_RADAR_WINKELABWEICHUNG_VR | 0x400F | STAT__WERT | Auslesen des horizontalen Radarsensorwinkels nach Verbauort Vorne Rechts (VR) | ° | - | high | int | - | 0.0010 | 1.0 | 0.0 | - | 22 | - | - |
| STATUS_HERSTELLER_SENSOREN_VERSION | 0x4010 | - | Abfrage Sensor Verbauort und die individuelle HW Version, PCAN Version nd SW Versionen | - | - | - | - | - | - | - | - | - | 22 | - | RES_0x4010_D |
| STEUERN_RADAR_WINKELABWEICHUNG_HR | 0x4011 | - | Setzen der Radar Justagewinkelabweichung Hinten Rechts | - | - | - | - | - | - | - | - | - | 2E | ARG_0x4011_D | - |
| STEUERN_RADAR_WINKELABWEICHUNG_HL | 0x4012 | - | Setzen der Radar Justagewinkelabweichung Hinten Links | - | - | - | - | - | - | - | - | - | 2E | ARG_0x4012_D | - |
| STEUERN_RADAR_WINKELABWEICHUNG_VR | 0x4014 | - | Setzen der Radar Justagewinkelabweichung Vorne Rechts | - | - | - | - | - | - | - | - | - | 2E | ARG_0x4014_D | - |
| STEUERN_RADAR_WINKELABWEICHUNG_VL | 0x4015 | - | Setzen der Radar Justagewinkelabweichung Vorne Links | - | - | - | - | - | - | - | - | - | 2E | ARG_0x4015_D | - |
| SLAVE_NUMBERS | 0x4016 | - | - | - | - | - | - | - | - | - | - | - | 2E | ARG_0x4016_D | - |
| SLAVE_QUANTITY | 0x4017 | STAT_SLAVE_QUANTITY | - | 0-n | - | high | unsigned char | TAB_ANZAHL_SLAVES | - | - | - | - | 22 | - | - |
STATUS_RAM_DATEN_SCHREIBEN_TAB
Dimensions: 4 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0x00 | Schreiben erfolgreich |
| 0x01 | Schreiben fehlgeschlagen |
| 0x02 | Schreiben läuft |
| 0x03 | Schreiben noch nicht angestoßen (Routine nicht gestartet) |
SVK_VERSION_DOP
Dimensions: 2 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | reserved |
| 1 | SVKVersion_01 |
TAB_0X28A6
Dimensions: 1 rows × 5 columns
| UW_ANZ | UW1_NR | UW2_NR | UW3_NR | UW4_NR |
|---|---|---|---|---|
| 4 | 0x0001 | 0x0002 | 0x0003 | 0x0004 |
TAB_ANZAHL_SLAVES
Dimensions: 3 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Kein Slave vorhanden |
| 90 | 1 Slave vorhanden (SA_5AG ohne SA_5AU) |
| 91 | 3 Slaves vorhanden (SA_5AG && SA_5AU) |
TAB_ENERGIESPARMODE_DOP
Dimensions: 5 rows × 2 columns
| WERT | TEXT |
|---|---|
| -1 | Mode ungültig |
| 0 | Energiesparmode nicht aktiv |
| 1 | Produktionsmode |
| 2 | Transportmode |
| 3 | Flashmode |
TAB_ENTLASTUNG_GENERATOR
Dimensions: 16 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0x00 | Keine Entlastungsfkt. Aktiv / Rücknahme |
| 0x01 | iGR-High |
| 0x02 | SULEV-Fkt |
| 0x03 | Entlastung nach Motorstart |
| 0x04 | Rennstart mit oder ohne AGM Batterie |
| 0x05 | ELMOTENTL Hitze |
| 0x06 | ELMOTENTL Kälte |
| 0x07 | Entlastung Anfahrschwäche wie P66,P85 |
| 0x08 | Übertemperatur Generator |
| 0x09 | Entlastung aus Sicherheitsgründen |
| 0x0A | Entlastung Begrenzung Lagerkräfte |
| 0x0B | Entlastung aus Komfortgründen |
| 0x0C | Entlastung aus funktionalen Gründen |
| 0x0D | Keine Entlastungsfkt. Aktiv / Rücknahme |
| 0x0E | Vorhalt |
| 0x0F | Signal ungültig |
TAB_INTENSITAETSSTUFE
Dimensions: 16 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Intensitätsstufe 0 |
| 1 | Intensitätsstufe 1 |
| 2 | Intensitätsstufe 2 |
| 3 | Intensitätsstufe 3 |
| 4 | Intensitätsstufe 4 |
| 5 | Intensitätsstufe 5 |
| 6 | Reserve |
| 7 | Reserve |
| 8 | Reserve |
| 9 | Reserve |
| 10 | Reserve |
| 11 | Reserve |
| 12 | Reserve |
| 13 | Reserve |
| 14 | Reserve |
| 15 | Reserve |
TAB_LED_XH
Dimensions: 6 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Anzeigesegment aus |
| 1 | Anzeigesegment AN, kein Blinken |
| 2 | Anzeigesegment AN, Blinken Stufe 1 |
| 3 | Anzeigesegment AN, Blinken Stufe 2 |
| 4 | Anzeigesegment AN, Blinken Stufe 3 |
| 255 | Ungültig |
TAB_MUSTER_LENKRAD
Dimensions: 16 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Muster 0 |
| 1 | Muster 1 |
| 2 | Muster 2 |
| 3 | Muster 3 |
| 4 | Muster 4 |
| 5 | Muster 5 |
| 6 | Muster 6 |
| 7 | Muster 7 |
| 8 | Muster 8 |
| 9 | Muster 9 |
| 10 | Muster 10 |
| 11 | Reserve |
| 12 | Reserve |
| 13 | Reserve |
| 14 | Reserve |
| 15 | Reserve |
TAB_PROG_DEP_SLAVE_DOP
Dimensions: 6 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | reserved |
| 1 | correctResult |
| 2 | incorrectResult |
| 3 | incorrectResult error SWE-HWE |
| 4 | incorrectResult error SWE-SWE |
| 255 | reserved |
TAB_RADAR_HF_MODUS
Dimensions: 3 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Radarabstrahlung AUS |
| 1 | Radarabstrahlung AN |
| 2 | Radarabstrahlung Automatisch |
TAB_RICHTUNG
Dimensions: 3 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | keine |
| 1 | Links |
| 2 | Rechts |
TAB_STATUS_RADAR_HF_MODUS
Dimensions: 3 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | Radarabstrahlung AUS |
| 1 | Radarabstrahlung AN |
| 2 | Radarabstrahlung Automatisch |
TAB_STATUS_ROUTINE
Dimensions: 7 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0x00 | Unbekannt |
| 0x01 | Aktiv |
| 0x02 | Erfolg |
| 0x03 | Abbruch |
| 0x04 | Fehler |
| 0x05 | Phasenende |
| 0xFF | Ungültig |
TAB_SVK_SLAVE_VERSION_DOP
Dimensions: 2 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0 | reserved |
| 1 | SVKVersion_01 |