MSV70.prg
INFO
| Field | Value |
|---|---|
| ECU | MSV70 fuer N52 mit EWS3 oder CAS |
| ORIGIN | BMW EA-41 Mertl |
| REVISION | 5.16 |
| AUTHOR | Unisoft MuellerWiebus EA-33, ValleyForge-T.I.S. Wieser EA-41 |
| COMMENT | SGBD für MSV70 Serie mit SW 0901 an ZGM oder K-Line |
| PACKAGE | 1.29 |
| SPRACHE | deutsch |
Jobs
Index
- INNENTEMP_LESEN - 0x301001 Steuergeraete-Innentemperatur auslesen NO_CON keine Vorraussetzungen
- STATUS_AGK - 0x30C101 Abgasklappe auslesen NO_CON keine Vorraussetzungen
- STATUS_AN_LUFTTEMPERATUR - 0x300A01 Ansauglufttemperatur 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_ANWS - 0x30EE01 Vanos Auslass Ventil auslesen NO_CON keine Vorraussetzungen
- STATUS_BLS - 0x300201 Bremslichtschalter auslesen NO_CON keine Vorraussetzungen
- STATUS_BLTS - 0x300301 Bremslichttestschalter auslesen NO_CON keine Vorraussetzungen
- STATUS_CO_ABGLEICH - 0x225FF1 Abgleichwert CO (Kohlenmonoxid) auslesen
- STATUS_DISA - 0x30C601 Variable Sauganlage (DISA) Klappe auslesen NO_CON keine Vorraussetzungen
- STATUS_DISA2 - 0x30AE01 Variable Sauganlage (DISA) Klappe2 auslesen NO_CON keine Vorraussetzungen
- STATUS_DKP_VOLT - 0x302A01 Drosselklappe auslesen NO_CON keine Vorraussetzungen
- STATUS_DMTL_HEIZUNG - 0x30CE01 Diagnosemodul-Tank Leckage Heizung auslesen NO_CON keine Vorraussetzungen
- STATUS_DMTL_P - 0x30CC01 Diagnosemodul-Tank Leckage Pumpe auslesen NO_CON keine Vorraussetzungen
- STATUS_DMTL_V - 0x30CD01 Diagnosemodul-Tank Leckage Ventil auslesen NO_CON keine Vorraussetzungen
- STATUS_E_LUEFTER - 0x30DA01 E-Luefter auslesen NO_CON keine Vorraussetzungen
- STATUS_EBL - 0x30C801 E-Box-Luefter auslesen NO_CON keine Vorraussetzungen
- STATUS_EISYGD - 0x33E1 Auslesen Eisy-Adaptionswerte (gedrosselt) (Anforderung aus CP5403)
- STATUS_EISYUGD - 0x33E0 Auslesen Eisy-Adaptionswerte (ungedrosselt) (Anforderung aus CP5403)
- STATUS_EKP - 0x30D801 Elektrische Kraftstoffpumpe 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_EML - 0x30D601 EML (Engine Malfunction Lamp) auslesen NO_CON keine Vorraussetzungen
- STATUS_ENWS - 0x30ED01 Vanos Einlass Ventil auslesen NO_CON keine Vorraussetzungen
- STATUS_EV1 - 0x30E101 Einspritzventil 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_EV2 - 0x30E201 Einspritzventil 2 auslesen NO_CON keine Vorraussetzungen
- STATUS_EV3 - 0x30E301 Einspritzventil 3 auslesen NO_CON keine Vorraussetzungen
- STATUS_EV4 - 0x30E401 Einspritzventil 4 auslesen NO_CON keine Vorraussetzungen
- STATUS_EV5 - 0x30E501 Einspritzventil 5 auslesen NO_CON keine Vorraussetzungen
- STATUS_EV6 - 0x30E601 Einspritzventil 6 auslesen NO_CON keine Vorraussetzungen
- STATUS_EWAP - 0x30BF01 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) auslesen NO_CON keine Vorraussetzungen
- STATUS_FGRL - 0x30D501 Fahrgeschwindigkeitsregler-Lampe auslesen NO_CON keine Vorraussetzungen
- STATUS_FWV1 - 0x301E01 Fahrerwunschversorgung 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_FWV2 - 0x301F01 Fahrerwunschversorgung 2 auslesen NO_CON keine Vorraussetzungen
- STATUS_GLF - 0x30C301 Gesteuerte Luftfuehrung auslesen NO_CON keine Vorraussetzungen
- STATUS_HFMS - 0x302E01 Sekundaerluft HFM (Heissfilm Luftmassenmesser) auslesen NO_CON keine Vorraussetzungen
- STATUS_KB1 - 0x303001 Klopfbaustein 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_KB2 - 0x303101 Klopfbaustein 2 auslesen NO_CON keine Vorraussetzungen
- STATUS_KFT - 0x30C901 Kennfeldthermostat auslesen NO_CON keine Vorraussetzungen
- STATUS_KGEH - 0x30AD01 Kurbelgehaeuseentlueftungsheizung auslesen NO_CON keine Vorraussetzungen
- STATUS_KOREL - 0x30C701 Klimakompressor-Relais auslesen NO_CON keine Vorraussetzungen
- STATUS_KRANN - 0x33E3 Auslesen Krann-Adaptionswerte (Anforderung aus CP5404)
- STATUS_KUP - 0x300401 Kupplungsschalter auslesen NO_CON keine Vorraussetzungen
- STATUS_L_SONDE - 0x302101 Lambdasonde vor Kat Bank1 auslesen NO_CON keine Vorraussetzungen
- STATUS_L_SONDE_2 - 0x302301 Lambdasonde vor Kat Bank2 auslesen NO_CON keine Vorraussetzungen
- STATUS_L_SONDE_2_H - 0x302401 Lambdasonde hinter Kat Bank2 auslesen NO_CON keine Vorraussetzungen
- STATUS_L_SONDE_H - 0x302201 Lambdasonde hinter Kat Bank1 auslesen NO_CON keine Vorraussetzungen
- STATUS_LMM_MASSE - 0x302501 Luftmassenmesser 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_LRP - 0x225FF7 Laufruhepruefung auslesen
- STATUS_LSH1 - 0x30D001 Lambdasondenheizung vor Kat Bank1 auslesen NO_CON keine Vorraussetzungen
- STATUS_LSH2 - 0x30D101 Lambdasondenheizung hinter Kat Bank1 auslesen NO_CON keine Vorraussetzungen
- STATUS_LSH3 - 0x30D201 Lambdasondenheizung vor Kat Bank2 auslesen NO_CON keine Vorraussetzungen
- STATUS_LSH4 - 0x30D301 Lambdasondenheizung hinter Kat Bank2 auslesen NO_CON keine Vorraussetzungen
- STATUS_MESSWERTE_LRP - 0x22402D Messwerte Laufruhepruefung auslesen
- STATUS_MIL - 0x30D401 MIL (Malfunction Indicator Lamp) auslesen NO_CON keine Vorraussetzungen
- STATUS_MOTORTEMPERATUR - 0x300C01 Motortemperatur auslesen NO_CON keine Vorraussetzungen
- STATUS_ODS - 0x300501 Oeldruckschalter auslesen NO_CON keine Vorraussetzungen
- STATUS_OEL - 0x300E01 Oelsensor auslesen NO_CON keine Vorraussetzungen
- STATUS_PWG_POTI_SPANNUNG - 0x302801 Fahrerwunsch 1 auslesen NO_CON keine Vorraussetzungen
- STATUS_PWG2 - 0x302901 Fahrerwunsch 2 auslesen NO_CON keine Vorraussetzungen
- STATUS_RBMMODE9 - 0x224026 Rate Based Monitoring Mode 9 auslesen (Ausgabe der Werte wie im Scantool Mode 9) Typ1 Gesetz
- STATUS_RBMMS1 - 0x224027 Rate Based Monitoring Motorsteuerung MSV70 Type1 detailiert auslesen
- STATUS_RBMMS2 - 0x224028 Rate Based Monitoring Motorsteuerung MSV70 Type2 auslesen
- STATUS_SDF1 - 0x301801 Saugrohrdruck1 / Ladedruck1 auslesen NO_CON keine Vorraussetzungen
- STATUS_SLP - 0x30CB01 Sekundaerluftpumpe auslesen NO_CON keine Vorraussetzungen
- STATUS_SLV - 0x30CA01 Sekundarluftventil auslesen NO_CON keine Vorraussetzungen
- STATUS_SOK - 0x30C201 Soundklappe auslesen NO_CON keine Vorraussetzungen
- STATUS_SPT - 0x300601 Sporttaster auslesen NO_CON keine Vorraussetzungen
- STATUS_SR - 0x30C401 Startrelais auslesen NO_CON keine Vorraussetzungen
- STATUS_TEV - 0x30CF01 Tankentlueftungsventil auslesen NO_CON keine Vorraussetzungen
- STATUS_TKA - 0x300D01 Kuehlerauslasstemperatur auslesen NO_CON keine Vorraussetzungen
- STATUS_TTEMP - 0x302F01 Taster Tempomat auslesen NO_CON keine Vorraussetzungen
- STATUS_UBAT - 0x302701 Batteriesensor auslesen NO_CON keine Vorraussetzungen
- STATUS_UBATT - 0x301C01 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) auslesen NO_CON keine Vorraussetzungen
- STATUS_UDF - 0x301701 Umgebungsdruck auslesen NO_CON keine Vorraussetzungen
- STATUS_UGEN - 0x303201 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) auslesen NO_CON keine Vorraussetzungen
- STATUS_UKL15 - 0x301B01 Kl.15 Spannung auslesen NO_CON keine Vorraussetzungen
- STATUS_UVLSS - 0x302001 Versorgungsspannung Lastsignal-Sensor auslesen NO_CON keine Vorraussetzungen
- STATUS_VVT - 0x30DD01 VVT auslesen NO_CON keine Vorraussetzungen
- STATUS_VVTR - 0x30DC01 VVT-Entlastungsrelais auslesen NO_CON keine Vorraussetzungen
- STEUERN_AGK - 0x30C107 Abgasklappe ansteuern NO_CON keine Vorraussetzungen
- STEUERN_ANWS - 0x30EE07 Vanos Auslass Ventil ansteuern CON_N_MIN nur bei erhoeter Motordrehzahl
- STEUERN_CO_ABGLEICH_PROGRAMMIEREN - 0x2E5FF108 Abgleichwert CO (Kohlenmonoxid) programmieren NO_CON keine Vorraussetzungen
- STEUERN_CO_ABGLEICH_RESET - 0x2E5FF104 Abgleichwert CO (Kohlenmonoxid) loeschen NO_CON keine Vorraussetzungen
- STEUERN_CO_ABGLEICH_VERSTELLEN - 0x2E5FF107 Abgleichwert CO (Kohlenmonoxid) vorgeben NO_CON keine Vorraussetzungen
- STEUERN_DISA - 0x30C607 Variable Sauganlage (DISA) Klappe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_DISA2 - 0x30AE07 Variable Sauganlage (DISA) Klappe2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_DK - 0x302A07 Drosselklappe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_DMTL_HEIZUNG - 0x30CE07 Diagnosemodul-Tank Leckage Heizung ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_DMTL_P - 0x30CC07 Diagnosemodul-Tank Leckage Pumpe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_DMTL_V - 0x30CD07 Diagnosemodul-Tank Leckage Ventil ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_E_LUEFTER - 0x30DA07 E-Luefter ansteuern CON_ELUE nur bei Motortemperatur TMOT kleiner 115gradCelsius
- STEUERN_EBL - 0x30C807 E-Box-Luefter ansteuern NO_CON keine Vorraussetzungen
- STEUERN_EISYGD - 0x31E1 Ansteuern Eisy-Adaptionswerte (gedrosselt) (Anforderung aus CP5403)
- STEUERN_EISYUGD - 0x31E0 Ansteuern Eisy-Adaptionswerte (ungedrosselt) (Anforderung aus CP5403)
- STEUERN_EKP - 0x30D807 Elektrische Kraftstoffpumpe 1 ansteuern Elektrische Kraftstoffpumpe 1 Deaktivierung aufheben N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_EML - 0x30D607 EML (Engine Malfunction Lamp) ansteuern NO_CON keine Vorraussetzungen
- STEUERN_ENDE_AGK - 0x30C100 Abgasklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_ANWS - 0x30EE00 Vanos Auslass Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DISA - 0x30C600 Variable Sauganlage (DISA) Klappe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DISA2 - 0x30AE00 Variable Sauganlage (DISA) Klappe2 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DK - 0x302A00 Drosselklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DMTL_HEIZUNG - 0x30CE00 Diagnosemodul-Tank Leckage Heizung Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DMTL_P - 0x30CC00 Diagnosemodul-Tank Leckage Pumpe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_DMTL_V - 0x30CD00 Diagnosemodul-Tank Leckage Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_E_LUEFTER - 0x30DA00 E-Luefter Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EBL - 0x30C800 E-Box-Luefter Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EKP - 0x30D800 Elektrische Kraftstoffpumpe 1 Ansteuerung beenden Elektrische Kraftstoffpumpe 1 Deaktivierung aufheben NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EML - 0x30D600 EML (Engine Malfunction Lamp) Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_ENWS - 0x30ED00 Vanos Einlass Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV1 - 0x30E100 Einspritzventil 1 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV2 - 0x30E200 Einspritzventil 2 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV3 - 0x30E300 Einspritzventil 3 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV4 - 0x30E400 Einspritzventil 4 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV5 - 0x30E500 Einspritzventil 5 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EV6 - 0x30E600 Einspritzventil 6 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_EWAP - 0x30BF00 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_FGRL - 0x30D500 Fahrgeschwindigkeitsregler-Lampe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_GLF - 0x30C300 Gesteuerte Luftfuehrung Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_KFT - 0x30C900 Kennfeldthermostat Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_KGEH - 0x30AD00 Kurbelgehaeuseentlueftungsheizung Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_KOREL - 0x30C700 Klimakompressor-Relais Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_LRP - 0x2E5FF700 Laufruhepruefung Vorgeben beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_LSH1 - 0x30D000 Lambdasondenheizung vor Kat Bank1 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_LSH2 - 0x30D100 Lambdasondenheizung hinter Kat Bank1 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_LSH3 - 0x30D200 Lambdasondenheizung vor Kat Bank2 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_LSH4 - 0x30D300 Lambdasondenheizung hinter Kat Bank2 Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_MIL - 0x30D400 MIL (Malfunction Indicator Lamp) Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_SLP - 0x30CB00 Sekundaerluftpumpe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_SLV - 0x30CA00 Sekundarluftventil Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_SOK - 0x30C200 Soundklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_SR - 0x30C400 Startrelais Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_TEV - 0x30CF00 Tankentlueftungsventil Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_UGEN - 0x303200 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_UVSG - 0x301C00 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_VVT - 0x30DD00 VVT Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENDE_VVTR - 0x30DC00 VVT-Entlastungsrelais Ansteuerung beenden NO_CON keine Vorraussetzungen
- STEUERN_ENWS - 0x30ED07 Vanos Einlass Ventil ansteuern CON_N_MIN nur bei erhoeter Motordrehzahl
- STEUERN_EV1 - 0x30E107 Einspritzventil 1 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EV2 - 0x30E207 Einspritzventil 2 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EV3 - 0x30E307 Einspritzventil 3 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EV4 - 0x30E407 Einspritzventil 4 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EV5 - 0x30E507 Einspritzventil 5 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EV6 - 0x30E607 Einspritzventil 6 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
- STEUERN_EWAP - 0x30BF07 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) ansteuern CON_EWAP nur bei Fahrzeuggeschwindigkeit v=0 und Motortemperatur TMOT kleiner 115gradCelsius und Batteriespannung UBAT groesser 10Volt
- STEUERN_EWAP_SF - 0x30BF07 Sonderfunktionen elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) ansteuern CON_EWAP nur bei Fahrzeuggeschwindigkeit v=0 und Motortemperatur TMOT kleiner 115gradCelsius und Batteriespannung UBAT groesser 10Volt
- STEUERN_FGRL - 0x30D507 Fahrgeschwindigkeitsregler-Lampe ansteuern NO_CON keine Vorraussetzungen
- STEUERN_GLF - 0x30C307 Gesteuerte Luftfuehrung ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_KFT - 0x30C907 Kennfeldthermostat ansteuern NO_CON keine Vorraussetzungen
- STEUERN_KGEH - 0x30AD07 Kurbelgehaeuseentlueftungsheizung ansteuern NO_CON keine Vorraussetzungen
- STEUERN_KOREL - 0x30C707 Klimakompressor-Relais ansteuern NO_CON keine Vorraussetzungen
- STEUERN_KRANN - 0x31E3 Ansteuern Krann-Adaptionswerte (Anforderung aus CP5404)
- STEUERN_LRP - 0x2E5FF707 Laufruhepruefung vorgeben NO_CON keine Vorraussetzungen
- STEUERN_LSH1 - 0x30D007 Lambdasondenheizung vor Kat Bank1 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_LSH2 - 0x30D107 Lambdasondenheizung hinter Kat Bank1 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_LSH3 - 0x30D207 Lambdasondenheizung vor Kat Bank2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_LSH4 - 0x30D307 Lambdasondenheizung hinter Kat Bank2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_MIL - 0x30D407 MIL (Malfunction Indicator Lamp) ansteuern NO_CON keine Vorraussetzungen
- STEUERN_PROGRAMM_LRP - 0x2E5FF708 Laufruhepruefung programmieren NO_CON keine Vorraussetzungen
- STEUERN_SLP - 0x30CB07 Sekundaerluftpumpe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_SLV - 0x30CA07 Sekundarluftventil ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_SOK - 0x30C207 Soundklappe ansteuern NO_CON keine Vorraussetzungen
- STEUERN_SR - 0x30C407 Startrelais ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_TEV - 0x30CF07 Tankentlueftungsventil ansteuern NO_CON keine Vorraussetzungen
- STEUERN_UGEN - 0x303207 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) ansteuern N_LL nur bei Leerlauf-Drehzahl
- STEUERN_UVSG - 0x301C07 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) ansteuern V_N_EQ_ZERO nur bei Fahrzeuggeschwindigkeit v=0 und Motordrehzahl n=0
- STEUERN_VVT - 0x30DD07 VVT ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- STEUERN_VVTR - 0x30DC07 VVT-Entlastungsrelais ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
- _STATUS_FASTA_EISYUGD - 0x31E0 & 0x33E0 Ansteuern und Auslesen Eisy-Adaptionswerte (ungedrosselt)
- _STATUS_FASTA_EISYGD - 0x31E1 & 0x33E1 Ansteuern und Auslesen Eisy-Adaptionswerte (gedrosselt)
- _STATUS_FASTA_KRANN - 0x31E3 & 0x33E3 Ansteuern und Auslesen Krann-Adaptionswerte
- _STATUS_INPA_EISYUGD - 0x31E0 & 0x33E0 Ansteuern und Auslesen Eisy-Adaptionswerte (ungedrosselt)
- _STATUS_INPA_EISYGD - 0x31E1 & 0x33E1 Ansteuern und Auslesen Eisy-Adaptionswerte (gedrosselt)
- _STATUS_INPA_KRANN - 0x31E3 & 0x33E3 Ansteuern und Auslesen Krann-Adaptionswerte
- _STATUS_FASTA_TECU - 0x23 Auslesen der DME-Temperaturstatistik
- STATUS_MESSWERTBLOCK_LESEN - Lesen eines Messwertblockes Es muss immer das BlockSchreibenFlag und mindestens ein MESSWERT uebergeben werden. KWP2000: $2C DynamicallyDefinedLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier $04 ClearDynamicallyDefinedLocalIdentifier KWP2000: $2C DynamicallyDefinedLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier $02 DefineByCommonIdentifier KWP2000: $21 ReadDataByLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier Modus : Default
- _STATUS_OBD_MODE_01 - Auslesen der Motor-Diagnosedaten nach Mode 01 PID 01
- _STATUS_OBD_MODE_03 - Auslesen der P-Codes nach Mode 3
- _STATUS_OBD_MODE_07 - Auslesen der P-Codes nach Mode 7
- FS_LESEN_DETAIL - Fehlerspeicher lesen (ein Fehler / alle Details) KWP2000: $17 ReadStatusOfDiagnosticTroubleCodes Modus: Default
- SET_BAUDRATE - Initialisierung der Kommunikationsparameter mit bestimmter Baudrate
- SET_PARAMETER - Aenderung der Kommunikationsparameter bei Long-Parametersätzen
- INTERFACETYPE - Interface-Typ bestimmen und ausgeben Es wird der Name des Interfaces übergeben Wichtig für Baudratenumschaltung weil bei ADS, EADS und OBD sind nur 115200 Baud möglich, bei EDIC nur 125000 Baud möglich
- ACCESS_TIMING_PARAMETER - Aenderung der Timingparameter im SG
- ACCESS_TIMING_PARAMETER_DEFAULT - Default-Timingparameter im SG
- FS_LESEN_HEX - Fehlerspeicher auslesen als Hex Dump
- MESSWERTBLOCK_LESEN - $2C F0 02 DDLI Messwerte aus Übergabestring definieren
- STATUS_MESSWERTE_VANOS - $2C F0 02 DDLI Messwerte CAM_IN und CAM_EX auf Wunsch von VS-22
- FS_LESEN_FREEZE_FRAME - Fehlerspeicher auslesen mit SAE Werten Umwelt und P-Code
- STATUS_MESSWERTE_KD - $2C F0 02 DDLI Messwerte nach Wunsch VS-22
- IDENT_AIF - Identdaten mit KWP2000: $1A ReadECUIdentification Anwender Informations Felder mit KWP 2000: $23 ReadMemoryByAddress
- STATUS_OBD - $21 05 Monitoring Funktionen und Status Bits
- STATUS_READINESS - $21 05 Monitoring Funktionen und Status Bits
- EWS_EMPFANG - EWS-Empfangsstatus auslesen
- STATUS_FGR - $21 07 MFL MultiFunktionsLekrad STATE_MSW_CAN
- DISTANCE_MIL_ON - Auslesen Fahrstrecke mit MIL-eingeschaltet KWP 2000* $21 09 DIST_ACT_MIL ReadDataByLocalIdentifier
- STATUS_SYSTEMCHECK_SEK_LUFT - Stand der Diagnose KWP 2000* $21 20 Status Systemtest SLS SekundärLuftSystem
- STATUS_SYSTEMCHECK_TEV_FUNC - Status und Messströme KWP 2000* $21 22 RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_TEV - Stand der Diagnose KWP 2000* $21 22 TEV ReadDataByLocalIdentifier
- STATUS_SYSTEMCHECK_EVAUSBL - welches EV-Ventil ist abgeschaltet KWP 2000* $21 25 RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_VVT_ANSCHLAG - Stand der Diagnose KWP 2000* $21 27 VVT ReadDataByLocalIdentifier
- STATUS_DIGITAL_3 - Statusbit KOmpressorRELais KWP 2000* $21 36 LV_ACCOUT_RLY ReadDataByLocalIdentifier
- STATUS_DIGITAL_4 - Statusbit LeerLauf KWP 2000* $21 3F LV_IS ReadDataByLocalIdentifier
- STATUS_L_SONDE_HEIZUNG_H_2 - Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 41 STATE_LSH_DOWN_2 ReadDataByLocalIdentifier
- STATUS_L_SONDE_HEIZUNG_H_1 - Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 42 STATE_LSH_DOWN_1 ReadDataByLocalIdentifier
- STATUS_L_SONDE_HEIZUNG_V_2 - Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 43 STATE_LSH_UP_2 ReadDataByLocalIdentifier
- STATUS_L_SONDE_HEIZUNG_V_1 - Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 44 STATE_LSH_UP_1 ReadDataByLocalIdentifier
- STATUS_EWS_LOCK - Statusbit LV_LOCK_IMOB = 1 blockt Zündung und Einspritzung KWP 2000* $21 49 ReadDataByLocalIdentifier
- STATUS_ZEIT_EINSPRITZ - Auslesen der Einspritzzeit Zyl. 1 KWP 2000* $21 4C BIOS_TI_0
- STATUS_ZUENDWINKEL - Auslesen des Zündwinkels Zylinder 1 KWP 2000* $21 56 IGA_IGC_0 ReadDataByLocalIdentifier
- STATUS_DROSSELKLAPPE - Auslesen des Drosselklappen Winkels KWP 2000* $21 57 TPS_AV ReadDataByLocalIdentifier
- STATUS_KLOPFEN - Auslesen des Status Klopfen erkannt 0/1 KWP 2000* $21 71 LV_KNK ReadDataByLocalIdentifier
- STATUS_KVA - Auslesen Faktor KVA KWP 2000* $21 C1 kva-faktor ReadDataByLocalIdentifier
- STATUS_BETRIEBSSTUNDENZAEHLER - $ 21 C3 Status Betriebsstundenzaehler auslesen
- STATUS_SYSTEMCHECK_DMTL - Stand der Diagnose KWP 2000* $21 DA DMTL ReadDataByLocalIdentifier
- STATUS_SYSTEMCHECK_L_SONDE - Stand der Diagnose KWP 2000* $21 DF vertauschte L-Sonden ReadDataByLocalIdentifier
- HS_LESEN - Historyspeicher lesen (alle History-Meldungen / Ort und Art) KWP2000: $22 ReadDataByCommonIdentifier $2100 HistoryMemory
- STATUS_LEISTUNGSSTUFE - Auslesen der Codierung Obere/Untere Leistungsstufe KWP2000: $22 ReadDataByCommonIdentifier $3020 RecordCommonIdentifier
- STATUS_MOTORDREHZAHL - Auslesen der Motordrehzahl und LL-Sollwert KWP 2000* $22 40 00 Auszug
- STATUS_DFMONITOR - Generator Belastung KWP2000: $22 40 01 ReadDataByCommonIdentifier dfmonitor
- STATUS_DIGITAL_1 - Status Schaltzustaende
- STATUS_MOTORLAUFUNRUHE - $22 40 03 Laufunruhe fuer 6 Zylinder lesen
- STATUS_GEBERRAD_ADAPTION - $2C F0 02 DDLI Messwerte für NWG-Adaptionen auslesen
- STATUS_NOCKENWELLE_ADAPTION - $22 40 06 Nockenwellen Adaptionen
- STATUS_DIGITAL_0 - Status Schaltzustaende $22 40 07 Betriebszustaende
- STATUS_FUNKTIONS - Status Schaltzustaende $22 40 07 Betriebszustaende
- STATUS_ADAPTION_DK - $22 40 08 Adaption DK lesen
- STATUS_ADAPTION_GEMISCH - $22 40 0A Adaption Lambda Regelung lesen
- STATUS_FASTA_COMMON - Messwerteblock lesen KWP2000: $2C F0 02 DynamicallyDefinedLocalIdentifier
- ECU_CONFIG - $22 5F F2 Fahrzeug Varianten lesen
- SPEICHER_LESEN - Auslesen des Steuergeraete-Speichers Als Argumente werden uebergeben: Speichersegment, Start-Adresse und Anzahl der Datenbytes KWP 2000: $23 ReadMemoryByAddress Modus : Default
- SPEICHER_LESEN_ASCII - Auslesen des Steuergeraete-Speichers Als Argumente werden uebergeben: Speichersegment, Start-Adresse und Anzahl der Datenbytes KWP 2000: $23 ReadMemoryByAddress Modus : Default
- ECU_CONFIG_RESET - $22 5F F2 04 gelernte FahrzeugVarianten löschen
- STATUS_ADD - Auslesen der additiven Korrektur Bank 1 KWP 2000* MFF_AD_ADD_MMV_REL[1]
- STATUS_ADD_2 - Auslesen der additiven Korrektur Bank 2 KWP 2000* MFF_AD_ADD_MMV_REL[2]
- STATUS_MUL - Auslesen des Korrekturfaktors Bank 1 KWP 2000* MFF_AD_FAC_MMV_REL[1]
- STATUS_MUL_2 - Auslesen des Korrekturfaktors Bank 1 KWP 2000* MFF_AD_FAC_MMV_REL[2]
- STATUS_INT - Auslesen des Integrator Bank 1 KWP 2000* TI_LAM_COR[1]
- STATUS_INT_2 - Auslesen des Integrator Bank 1 KWP 2000* TI_LAM_COR[1]
- STATUS_LL_ABGLEICH - LL-Abgleichswerte lesen
- STEUERN_LL_ABGLEICH - LL-Abgleich vorgegeben -256 bis +254
- STEUERN_LLABG_PROG - LL-Abgleichswerte werden vorgegeben
- FLASH_CRC_PRUEFEN - Codier Checksumme pruefen KWP2000: $31 StartRoutineByLocalIdentifier $01 Checksum
- HS_LOESCHEN - Historyspeicher loeschen KWP2000: $31 StartRoutineByLocalIdentifier $03 ClearHistoryMemory Modus : Default
- DME_STARTWERT_ABGLEICH - Kopiert die ISN auf beide Wechselcodes KWP2000: $31 StartRoutineByLocalIdentifier LocalIdentifier $20 Modus : Default
- START_SYSTEMCHECK_SEK_LUFT - $31 20 Systemdiagnose SLS SekundärLuftSystem starten
- START_SYSTEMCHECK_TEV_FUNC - $31 22 Systemdiagnose TEVstarten
- START_SYSTEMCHECK_EVAUSBL - $31 25 Systemdiagnose Einspritzventil abschalten
- START_SYSTEMCHECK_LLERH - $31 26 Systemdiagnose EOL LL-Erhöhen starten
- START_SYSTEMCHECK_VVT_ANSCHLAG - $31 27 Systemdiagnose VVT-Anschläge lernen starten
- EWS_STARTWERT - EWS-Startwertinitialisierung
- EWS_STARTWERTPROGRAMMIERUNG - EWS-Startwertinitialisierung
- EWS_STARTWERTRUECKSETZUNG - EWS-Startwertinitialisierung
- START_SYSTEMCHECK_L_REGELUNG_AUS - $31 D9 01 Systemdiagnose LambdaRegelung abschalten
- STOP_SYSTEMCHECK_L_REGELUNG_AUS - $31 D9 01 Systemdiagnose LambdaRegelung einschalten
- START_SYSTEMCHECK_DMTL - $31 DA Systemdiagnose DMTL starten
- START_SYSTEMCHECK_L_SONDE - $31 DF Systemdiagnose vertauschte L-Sonden starten
- RESET_CRU_OFF - $31 F4 STATE_CRU_OFF_IRR und STATE_CRU_OFF_REV löschen
- START_SYSTEMCHECK_VVT_SOLLWERT - $31 FE Systemdiagnose VVT Steuerung ueber CAN freigeben
- STOP_SYSTEMCHECK_VVT_SOLLWERT - $31 FE Systemdiagnose VVT Steuerung ueber CAN freigeben
- STOP_SYSTEMCHECK_SEK_LUFT - $32 20 Systemdiagnose SekundärLuftSystem beenden
- STOP_SYSTEMCHECK_TEV_FUNC - $32 22 Systemdiagnose TEV beenden
- STOP_SYSTEMCHECK_EVAUSBL - $32 25 Ende Systemtest Ventil Abschalten
- STOP_SYSTEMCHECK_LLERH - $32 26 EOL-Test LL-Anheben beenden
- STOP_SYSTEMCHECK_VVT_ANSCHLAG - $32 27 Systemdiagnose VVT-Anschläge lernen starten
- STOP_SYSTEMCHECK_DMTL - $32 DA Systemdiagnose DMTL beenden
- STOP_SYSTEMCHECK_L_SONDE - $32 DF Systemdiagnose vertauschte L-Sonden beenden
- STATUS_SYSTEMCHECK_SEK_LAMBDA_WERT - Status und Luftmassen KWP 2000* $33 20 RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_TEV_WERT - Status und Messströme KWP 2000* $33 22 RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_LLERH_WERT - aktuelle Drehzahl N KWP 2000* $33 26 RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_DMTL_WERT - Status und Messströme KWP 2000* $33 DA RequestRoutineResultsByLocalIdentifier
- STATUS_SYSTEMCHECK_L_SONDE_WERTE - Status und Messwerte KWP 2000* $33 DF RequestRoutineResultsByLocalIdentifier
- STEUERN_KVA - Faktor KVA Korrektur vorgeben KWP 2000* $3B C1 kva-faktor WriteDataByLocalIdentifier
- STATUS_ANALOG - Analogen Messwert periodisch lesen KWP2000: $2C F0 02 DynamicallyDefinedLocalIdentifier
- STATUS_FASTA2 - $2C F0 02 DDLI Messwerte nach Wunsch EA-36
- STATUS_MESSWERTE_NL - $2C F0 02 DDLI Messwerte Klopfen nach Wunsch VS-22
- STATUS_MESSWERTBLOCK_ADC - $21 F0 DDLI Messwerteblock lesen der zuletzt mit $2C F0 definiert wurde
- INITIALISIERUNG - Initialisierung und Kommunikationsparameter
- INFO - Information SGBD
- DIAGNOSEPROTOKOLL_LESEN - Gibt die möglichen Diagnoseprotokolle für eine Auswahl an den Aufrufer zurück
- DIAGNOSEPROTOKOLL_SETZEN - Wählt ein Diagnoseprotokoll aus
- IDENT - Identdaten KWP2000: $1A ReadECUIdentification Modus : Default
- FS_LESEN - Fehlerspeicher lesen (alle Fehler / Ort und Art) KWP2000: $18 ReadDiagnosticTroubleCodesByStatus Modus : Default
- FS_LOESCHEN - Fehlerspeicher loeschen KWP2000: $14 ClearDiagnosticInformation Modus : Default
- PRUEFSTEMPEL_LESEN - Auslesen des Pruefstempels KWP2000: $22 ReadDataByCommonIdentifier $1000 TestStamp Modus : Default
- PRUEFSTEMPEL_SCHREIBEN - Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden. KWP2000: $2E WriteDataByCommonIdentifier $1000 TestStamp Modus : Default
- NORMALER_DATENVERKEHR - Sperren bzw. Freigeben des normalen Datenverkehrs KWP2000: $28 DisableNormalMessageTransmission KWP2000: $29 EnableNormalMessageTransmission Modus : Default
- DIAGNOSE_AUFRECHT - Diagnosemode des SG aufrecht erhalten KWP2000: $3E TesterPresent Modus : Default
- SERIENNUMMER_LESEN - Hersteller Seriennummer lesen KWP2000: $1A ReadECUIdentification $89 SystemSupplierECUSerialNumber oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- ZIF_LESEN - Auslesen des Zulieferinfofeldes KWP2000: $22 ReadDataByCommonIdentifier $2503 ProgrammReferenz und KWP2000: $1A ReadECUIdentification $91 VehicleManufacturerECUHardware*Number oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- ZIF_BACKUP_LESEN - Auslesen des Backups des Zulieferinfofeldes ProgrammReferenzBackup PRGREFB vehicleManufECUHWNumberBackup VMECUHNB KWP2000: $22 ReadDataByCommonIdentifier $2500 PRBHW*B oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- PHYSIKALISCHE_HW_NR_LESEN - Auslesen der physikalischen Hardwarenummer KWP2000: $1A ReadECUIdentification $87 physicalECUHardwareNumber (PECUHN) oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- HARDWARE_REFERENZ_LESEN - Auslesen der Hardware Referenz KWP2000: $22 ReadDataByCommonIdentifier $2502 HWREF oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- DATEN_REFERENZ_LESEN - Auslesen der Daten Referenz KWP2000: $22 ReadDataByCommonIdentifier $2504 DREF Modus : Default
- FLASH_ZEITEN_LESEN - Auslesen der Flash Loeschzeit, Signaturtestzeit, Authentisierberechnungszeit und Resetzeit KWP2000: $22 ReadDataByCommonIdentifier $2501 Zeiten Modus : Default
- FLASH_BLOCKLAENGE_LESEN - Auslesen des maximalen Blocklaenge beim Flashen KWP2000: $22 ReadDataByCommonIdentifier $2506 MaximaleBlockLaenge Modus : Default
- AUTHENTISIERUNG_ZUFALLSZAHL_LESEN - Authentisierung Zufallszahl des SG lesen KWP2000: $31 StartRoutineByLocalIdentifier $07 RequestForAuthentication Modus : Default
- AUTHENTISIERUNG_START - Authentisierung pruefen KWP2000: $31 StartRoutineByLocalIdentifier $08 ReleaseAuthentication Modus : Default
- FLASH_PROGRAMMIER_STATUS_LESEN - Programmierstatus des SG lesen KWP2000: $31 StartRoutineByLocalIdentifier $0A CheckProgrammingStatus Modus : Default
- FLASH_SIGNATUR_PRUEFEN - Flash Signatur pruefen KWP2000: $31 StartRoutineByLocalIdentifier $09 CheckSignature Modus : Default
- STEUERGERAETE_RESET - Steuergeraete reset ausloesen KWP2000: $11 ECUReset $01 PowerOn Modus : Default Nach dem Job muss die Steuergeraete-Resetzeit abgewartet werden. Danach ist das Steuergeraet wieder diagnosefaehig siehe Job FLASH_ZEITEN_LESEN Result FLASH_RESETZEIT
- FLASH_LOESCHEN - Flash loeschen Standard Flashjob KWP2000: $31 StartRoutineByLocalIdentifier $02 ClearMemory Modus : Default
- FLASH_SCHREIBEN_ADRESSE - Vorbereitung fuer Flash schreiben Standard Flashjob KWP2000: $34 RequestDownload Modus : Default
- FLASH_SCHREIBEN - Flash Daten schreiben Standard Flashjob KWP2000: $36 TransferData Modus : Default
- FLASH_SCHREIBEN_ENDE - Flashprogrammierung abschliessen Standard Flashjob KWP2000: $37 RequestTransferExit Modus : Default
- AIF_LESEN - Auslesen des Anwender Informations Feldes Standard Flashjob KWP 2000: $23 ReadMemoryByAddress Modus : Default
- AIF_SCHREIBEN - Schreiben des Anwender Informations Feldes Standard Flashjob KWP 2000: $3D WriteMemoryByAddress Modus : Default
- FLASH_PARAMETER_LESEN - Gibt die SG-spezifischen Flash-Parameter zurück
- FLASH_PARAMETER_SETZEN - Setzt die SG-spezifischen Flash-Parameter
- DIAGNOSE_MODE - SG in bestimmten Diagnosemode bringen KWP2000: $10 StartDiagnosticSession Modus : einstellbar mit diesem Job Wenn MODE = "ECUPM" ( ECUProgrammingMode ) muss nach dem Job die Steuergeraete-Resetzeit abgewartet werden. Danach ist das Steuergeraet wieder diagnosefaehig siehe Job FLASH_ZEITEN_LESEN Result FLASH_RESETZEIT
- DIAGNOSE_ENDE - Diagnosemode des SG beenden KWP2000: $20 StopDiagnosticSession Modus : Default
- SLEEP_MODE - SG in Sleep-Mode versetzen KWP2000: $31 StartRoutineByLocalIdentifier a) $0E Time controlled PowerDown oder b) $05 PowerDown $00 all ECU Modus : Default
- SLEEP_MODE_FUNKTIONAL - SG in Sleep-Mode versetzen KWP2000: $31 StartRoutineByLocalIdentifier $05 PowerDown Modus : Default
- PRUEFCODE_LESEN - Standard Pruefcode lesen fuer Kundendienst KWP2000: $1A ReadECUIdentification KWP2000: $18 ReadDiagnosticTroubleCodesByStatus KWP2000: $17 ReadStatusOfDiagnosticTroubleCodes Modus : Default
- IDENT_IBS - $22 40 21 BMW Nr, Seriennummer, SW/HW Index
- STATUS_SYSTEMCHECK_PM_INFO_1 - $22 40 22 Bytefeld 1 Batterie Powermanagement lesen
- STATUS_SYSTEMCHECK_PM_INFO_2 - $22 40 23 Bytefeld 2 Batterie Powermanagement lesen
- STEUERN_PM_HISTOGRAM_RESET - $30 F5 04 Loeschen von pminfo1 index 23-30
- ADAP_SELEKTIV_LOESCHEN - Löschen von Adaptionen und gelernte Varianten KWP 2000 $31 30 xx xx xx Loeschen der Adaptionswerte
- STEUERN_BATTERIETAUSCH_REGISTRIEREN - KWP 2000 $31 30 00 10 00 Bit setzen Batterietausch registrieren
- START_SYSTEMCHECK_PM_MESSEMODE - $31 F6 Systemdiagnose BatterieSensor reset
- STOP_SYSTEMCHECK_PM_MESSEMODE - $32 F6 Systemdiagnose BatterieSensor reset beenden
- CBS_INFO - Ausgabe der CBS-Version
- CBS_DATEN_LESEN - CBS Daten auslesen (fuer CBS-Version 4) KWP2000: $22 ReadDataByCommonIdentifier Modus : Default
- CBS_RESET - CBS Daten Zuruecksetzen (fuer CBS-Version 4) KWP2000: $2E WriteDataByCommonIdentifier Modus : Default Musterparametersatz fuer Bremsbelagverschleiss Vorder/Hinterachse br_v,100,1,0,0,0,1,0,0 br_h,100,1,0,0,0,1,0,0 jedoch mit "Strich_Punkt" getrennt (nicht mit Komma!)
- C_CI_LESEN - Codierindex lesen Standard Codierjob KWP2000: $1A ReadECUIdentification $9B Vehicle Manufacturer Coding Index oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
- C_FG_LESEN - Fahrgestellnummer lesen Standard Codierjob KWP2000: $1A ReadECUIdentification $90 Vehicle Identification Number Modus : Default
- C_FG_SCHREIBEN - Fahrgestellnummer schreiben Standard Codierjob KWP2000: $3B WriteDataByLocalIdentifier $90 Vehicle Identification Number Modus : Default
- C_FG_AUFTRAG - Fahrgestellnummer schreiben und ruecklesen Standard Codierjob KWP2000: $3B WriteDataByLocalIdentifier $90 Vehicle Identification Number KWP2000: $1A ReadECUIdentification $90 Vehicle Identification Number Modus : Default
- C_AEI_LESEN - Aenderungsindex der Codierdaten lesen Standard Codierjob KWP2000: $22 ReadDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
- C_AEI_SCHREIBEN - Aenderungsindex der Codierdaten schreiben Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
- C_AEI_AUFTRAG - Aenderungsindex der Codierdaten schreiben und ruecklesen Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3FFF ChangeIndexOfCodingData KWP2000: $22 ReadDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
- C_C_LESEN - Codierdaten lesen Standard Codierjob KWP2000: $22 ReadDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
- C_C_SCHREIBEN - Codierdaten schreiben Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
- C_C_AUFTRAG - Codierdaten schreiben und ruecklesen Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3000 - $3EFF CodingDataSet KWP2000: $22 ReadDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
INNENTEMP_LESEN
0x301001 Steuergeraete-Innentemperatur auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_TSG_WERT | real | ADC-Wert Steuergeraete-Innentemperatur V_TECU |
| STAT_ADC_TSG_EINH | string | V |
| SG_INNENTEMP_WERT | real | Temperatur Steuergeraete-Innentemperatur TECU |
| SG_INNENTEMP_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_AGK
0x30C101 Abgasklappe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_AGK | unsigned long | Status Abgasklappe LV_EF |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_AN_LUFTTEMPERATUR
0x300A01 Ansauglufttemperatur 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_TANS1_WERT | real | ADC-Wert Ansauglufttemperatur 1 V_TIA |
| STAT_ADC_TANS1_EINH | string | V |
| STAT_AN_LUFTTEMPERATUR_WERT | real | Temperatur Ansauglufttemperatur 1 TIA_MES |
| STAT_AN_LUFTTEMPERATUR_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_ANWS
0x30EE01 Vanos Auslass Ventil auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_ANWS_WERT | real | Status Vanos_A Ventil IVVTPWM_1 |
| STAT_STAT_ANWS_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_BLS
0x300201 Bremslichtschalter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_BLS | unsigned long | Status Bremslichtschalter LV_IM_BLS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_BLTS
0x300301 Bremslichttestschalter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_BLTS | unsigned long | Status Bremslichttestschalter LV_IM_BTS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_CO_ABGLEICH
0x225FF1 Abgleichwert CO (Kohlenmonoxid) auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_LV_FAC_MFF_ADD_EXT_ADJ_NVMY | unsigned long | Logical value for storing CO correction in NVMY LV_FAC_MFF_ADD_EXT_ADJ_NVMY |
| STAT_LV_RST_MFF_ADD_EXT_ADJ_NVMY | unsigned long | Flag to reset external MFF correction to 0 LV_RST_MFF_ADD_EXT_ADJ_NVMY |
| STAT_CO_ABGLEICH_WERT | real | Status Abgleichwert CO (Kohlenmonoxid) FAC_MFF_ADD_EXT_ADJ |
| STAT_CO_ABGLEICH_EINH | string | percent |
| STAT_MFF_ADD_EXT_ADJ_1_WERT | real | Mass fuel flow for CO adjustment at idling, value for injection correction MFF_ADD_EXT_ADJ[1] |
| STAT_MFF_ADD_EXT_ADJ_1_EINH | string | mgperstk |
| STAT_MFF_ADD_EXT_ADJ_2_WERT | real | Mass fuel flow for CO adjustment at idling, value for injection correction MFF_ADD_EXT_ADJ[2] |
| STAT_MFF_ADD_EXT_ADJ_2_EINH | string | mgperstk |
| STAT_MFF_ADD_EXT_ADJ_NVMY_WERT | real | Mass fuel flow for CO adjustment at idling, value for storing in NVMY MFF_ADD_EXT_ADJ_NVMY |
| STAT_MFF_ADD_EXT_ADJ_NVMY_EINH | string | mgperstk |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DISA
0x30C601 Variable Sauganlage (DISA) Klappe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_DISA_WERT | real | Status Variable Sauganlage (DISA) Klappe VIMPWM_1 |
| STAT_STAT_DISA_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DISA2
0x30AE01 Variable Sauganlage (DISA) Klappe2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_DISA2_WERT | real | Status Variable Sauganlage (DISA) Klappe2 VIMPWM_2 |
| STAT_STAT_DISA2_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DKP_VOLT
0x302A01 Drosselklappe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_DKP_VOLT_WERT | real | ADC-Wert1 Drosselklappe V_TPS_1 |
| STAT_DKP_VOLT_EINH | string | V |
| STAT_ADC2_DK_WERT | real | ADC-Wert2 Drosselklappe V_TPS_2 |
| STAT_ADC2_DK_EINH | string | V |
| STAT_STAT_DK_WERT | real | Status Drosselklappe TPS_AV |
| STAT_STAT_DK_EINH | string | degreeTPS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DMTL_HEIZUNG
0x30CE01 Diagnosemodul-Tank Leckage Heizung auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_DMTLH | unsigned long | Status Diagnosemodul-Tank Leckage Heizung LV_HDMTL_ON |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DMTL_P
0x30CC01 Diagnosemodul-Tank Leckage Pumpe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_DMTL_P | unsigned long | Status Diagnosemodul-Tank Leckage Pumpe LV_DMTL_PUMP |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_DMTL_V
0x30CD01 Diagnosemodul-Tank Leckage Ventil auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_DMTL_V | unsigned long | Status Diagnosemodul-Tank Leckage Ventil LV_DMTLS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_E_LUEFTER
0x30DA01 E-Luefter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_ELUE_WERT | real | Status E-Luefter ECFPWM[0] |
| STAT_STAT_ELUE_EINH | string | percent |
| STAT_PHY_TCO_WERT | real | Kuehlmitteltemperatur (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TCO |
| STAT_PHY_TCO_EINH | string | degreeC |
| STAT_PHY_TCO_2_WERT | real | Kuehlmitteltemperatur am Kuehlerausgang (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TCO_2 |
| STAT_PHY_TCO_2_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EBL
0x30C801 E-Box-Luefter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_EBL | unsigned long | Status E-Box-Luefter LV_EBOX_CFA |
| STAT_PHY_TECU_WERT | real | Steuergeraetetemperatur DME (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TECU |
| STAT_PHY_TECU_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EISYGD
0x33E1 Auslesen Eisy-Adaptionswerte (gedrosselt) (Anforderung aus CP5403)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_FS_EISYGD_TEXT | string | Adaption Massenstromregler auf DK erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYGD_WERT | int | |
| STAT_MRNN_TEST_DK_WERT | real | Massenstromregler-Adaptionswert NN im GD - Betrieb ueber Test gelesen MRNN_TEST_DK |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EISYUGD
0x33E0 Auslesen Eisy-Adaptionswerte (ungedrosselt) (Anforderung aus CP5403)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_FS_EISYUGD_TEXT | string | Adaption Massenstromregler auf Hub erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYUGD_WERT | int | |
| STAT_MRNN_TEST_VVT_WERT | real | Massenstromregler-Adaptionswert NN im VVT Betrieb ueber Test gelesen MRNN_TEST_VVT |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EKP
0x30D801 Elektrische Kraftstoffpumpe 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_EKP1_WERT | real | Status Elektrische Kraftstoffpumpe 1 EFPPWM |
| STAT_STAT_EKP1_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EML
0x30D601 EML (Engine Malfunction Lamp) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_EML | unsigned long | Status EML (Engine Malfunction Lamp) LV_WAL_1 |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_ENWS
0x30ED01 Vanos Einlass Ventil auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_ENWS_WERT | real | Status Vanos_E Ventil IVVTPWM_0 |
| STAT_STAT_ENWS_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV1
0x30E101 Einspritzventil 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV1_WERT | real | Einspritzzeit Einspritzventil 1 ti_1_0 |
| STAT_PHY_EV1_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV2
0x30E201 Einspritzventil 2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV2_WERT | real | Einspritzzeit Einspritzventil 2 ti_1_4 |
| STAT_PHY_EV2_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV3
0x30E301 Einspritzventil 3 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV3_WERT | real | Einspritzzeit Einspritzventil 3 ti_1_2 |
| STAT_PHY_EV3_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV4
0x30E401 Einspritzventil 4 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV4_WERT | real | Einspritzzeit Einspritzventil 4 ti_1_5 |
| STAT_PHY_EV4_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV5
0x30E501 Einspritzventil 5 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV5_WERT | real | Einspritzzeit Einspritzventil 5 ti_1_1 |
| STAT_PHY_EV5_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EV6
0x30E601 Einspritzventil 6 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_EV6_WERT | real | Einspritzzeit Einspritzventil 6 ti_1_3 |
| STAT_PHY_EV6_EINH | string | ms |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_EWAP
0x30BF01 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_EWAP_WERT | real | Status elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) (Ausnahme fuer Rueckwaertskompatibilitaet SGBD MSV70) 1BYTE in 0 bis 100 Prozent |
| STAT_STAT_EWAP_EINH | string | percent |
| STAT_PHY_TCO_WERT | real | Kuehlmitteltemperatur (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TCO |
| STAT_PHY_TCO_EINH | string | degreeC |
| STAT_PHY_TCO_2_WERT | real | Coolant temperature (radiator outlet) (A2L-Name: tco_2) TCO_2 |
| STAT_PHY_TCO_2_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_FGRL
0x30D501 Fahrgeschwindigkeitsregler-Lampe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_FGRL | unsigned long | Status Fahrgeschwindigkeitsregler-Lampe LV_CRU_MAIN_SWI |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_FWV1
0x301E01 Fahrerwunschversorgung 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_FWV1_WERT | real | ADC-Wert Fahrerwunschversorgung 1 VCC_PVS_1 |
| STAT_ADC_FWV1_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_FWV2
0x301F01 Fahrerwunschversorgung 2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_FWV2_WERT | real | ADC-Wert Fahrerwunschversorgung 2 VCC_PVS_2 |
| STAT_ADC_FWV2_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_GLF
0x30C301 Gesteuerte Luftfuehrung auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_GLF | unsigned long | Status Gesteuerte Luftfuehrung LV_ECRAS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_HFMS
0x302E01 Sekundaerluft HFM (Heissfilm Luftmassenmesser) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_HFMS_WERT | real | ADC-Wert Sekundaerluft HFM (Heissfilm Luftmassenmesser) V_SAF |
| STAT_ADC_HFMS_EINH | string | V |
| STAT_PHY_HFMS_WERT | real | Luftmasse Sekundaerluft HFM (Heissfilm Luftmassenmesser) SAF_KGH_MES_BAS |
| STAT_PHY_HFMS_EINH | string | kgperh |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KB1
0x303001 Klopfbaustein 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_KB1_WERT | real | ADC-Wert Klopfbaustein 1 KNKS[0] |
| STAT_ADC_KB1_EINH | string | V |
| STAT_STAT_KB1_WERT | real | Status Klopfbaustein 1 KNKS_REL_NL_0 |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KB2
0x303101 Klopfbaustein 2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_KB2_WERT | real | ADC-Wert Klopfbaustein 2 KNKS[5] |
| STAT_ADC_KB2_EINH | string | V |
| STAT_STAT_KB2_WERT | real | Status Klopfbaustein 2 KNKS_REL_NL_5 |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KFT
0x30C901 Kennfeldthermostat auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_KFT_WERT | real | Status Kennfeldthermostat ECTPWM |
| STAT_STAT_KFT_EINH | string | percent |
| STAT_PHY_TCO_WERT | real | Kuehlmitteltemperatur (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TCO |
| STAT_PHY_TCO_EINH | string | degreeC |
| STAT_PHY_TCO_2_WERT | real | Kuehlmitteltemperatur am Kuehlerausgang (Dieser Wert wurde zusaetzlich zum geforderten Umfang eingefuegt) TCO_2 |
| STAT_PHY_TCO_2_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KGEH
0x30AD01 Kurbelgehaeuseentlueftungsheizung auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_KGEH | unsigned long | Status Kurbelgehaeuseentlueftungsheizung LV_RLY_CRCV_HEAT |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KOREL
0x30C701 Klimakompressor-Relais auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_KOREL | unsigned long | Status Klimakompressor-Relais LV_ACCOUT_RLY |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KRANN
0x33E3 Auslesen Krann-Adaptionswerte (Anforderung aus CP5404)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_KRNN_TEST_WERT | real | Zuendwinkelaenderung aus Adaption Klopfregelung fuer Testerabfrage KRNN_TEST |
| STAT_KRNN_TEST_EINH | string | degree |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_KUP
0x300401 Kupplungsschalter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_KUP | unsigned long | Status Kupplungsschalter LV_CS |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_L_SONDE
0x302101 Lambdasonde vor Kat Bank1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_L_SONDE_WERT | real | ADC-Wert Lambdasonde vor Kat Bank1 VLS_UP[1] |
| STAT_L_SONDE_EINH | string | V |
| STAT_PHY_LSVK1_WERT | real | Lambdawert Lambdasonde vor Kat Bank1 LAMB_LS_UP[1] |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_L_SONDE_2
0x302301 Lambdasonde vor Kat Bank2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_L_SONDE_2_WERT | real | ADC-Wert Lambdasonde vor Kat Bank2 VLS_UP[2] |
| STAT_L_SONDE_2_EINH | string | V |
| STAT_PHY_LSVK2_WERT | real | Lambdawert Lambdasonde vor Kat Bank2 LAMB_LS_UP[2] |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_L_SONDE_2_H
0x302401 Lambdasonde hinter Kat Bank2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_L_SONDE_2_H_WERT | real | ADC-Wert Lambdasonde hinter Kat Bank2 VLS_DOWN[2] |
| STAT_L_SONDE_2_H_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_L_SONDE_H
0x302201 Lambdasonde hinter Kat Bank1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_L_SONDE_H_WERT | real | ADC-Wert Lambdasonde hinter Kat Bank1 VLS_DOWN[1] |
| STAT_L_SONDE_H_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LMM_MASSE
0x302501 Luftmassenmesser 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_LMM1_WERT | real | ADC-Wert Luftmassenmesser 1 V_MAF |
| STAT_ADC_LMM1_EINH | string | V |
| STAT_LMM_MASSE_WERT | real | Durchsatz Luftmassenmesser 1 MAF_KGH_MES_BAS |
| STAT_LMM_MASSE_EINH | string | kgperh |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LRP
0x225FF7 Laufruhepruefung auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_ZUENDWINKELEINGRIFF_AKTIV | unsigned long | Zuendwinkeleingriff (1= deaktiviert 0=aktiviert) 1BYTE IDENTICAL HEX |
| STAT_STAT_GEMISCHEINGRIFF_AKTIV | unsigned long | Gemischeingriff (1= deaktiviert 0=aktiviert) 1BYTE IDENTICAL HEX |
| STAT_STAT_HUBEINGRIFF_AKTIV | unsigned long | zylinderselektiver Hubeingriff (1= deaktiviert 0=aktiviert) 1BYTE IDENTICAL HEX |
| STAT_STAT_MINHUBEINGRIFF_AKTIV | unsigned long | Minhubeingriff (1= deaktiviert 0=aktiviert) 1BYTE IDENTICAL HEX |
| STAT_STAT_ZUENDWINKELEINGRIFF_FREIGEGEBEN | unsigned long | Zuendwinkeleingriff (1= freigegeben 0=nicht freigegeben) 1BYTE IDENTICAL HEX |
| STAT_STAT_GEMISCHEINGRIFF_FREIGEGEBEN | unsigned long | Gemischeingriff (1= freigegeben 0=nicht freigegeben) 1BYTE IDENTICAL HEX |
| STAT_STAT_HUBEINGRIFF_FREIGEGEBEN | unsigned long | zylinderselektiver Hubeingriff (1= freigegeben 0=nicht freigegeben) 1BYTE IDENTICAL HEX |
| STAT_STAT_MINHUBEINGRIFF_FREIGEGEBEN | unsigned long | Minhubeingriff (1= freigegeben 0=nicht freigegeben) 1BYTE IDENTICAL HEX |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LSH1
0x30D001 Lambdasondenheizung vor Kat Bank1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_LSH1_WERT | real | Status Lambdasondenheizung vor Kat Bank1 LSHPWM_UP[1] |
| STAT_STAT_LSH1_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LSH2
0x30D101 Lambdasondenheizung hinter Kat Bank1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_LSH2_WERT | real | Status Lambdasondenheizung hinter Kat Bank1 LSHPWM_DOWN[1] |
| STAT_STAT_LSH2_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LSH3
0x30D201 Lambdasondenheizung vor Kat Bank2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_LSH3_WERT | real | Status Lambdasondenheizung vor Kat Bank2 LSHPWM_UP[2] |
| STAT_STAT_LSH3_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LSH4
0x30D301 Lambdasondenheizung hinter Kat Bank2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_LSH4_WERT | real | Status Lambdasondenheizung hinter Kat Bank2 LSHPWM_DOWN[2] |
| STAT_STAT_LSH4_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_MESSWERTE_LRP
0x22402D Messwerte Laufruhepruefung auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ST_VBRVS_AUS | unsigned long | Statuswort Verbrennungsregelung fuer Service (A2L-Name: St_vbrvs_aus) ST_VBRVS_AUS |
| STAT_ST_VBRVS_EIN | unsigned long | Statuswort Verbrennungsregelung vom Tester (A2L-Name: St_vbrvs_ein) ST_VBRVS_EIN |
| STAT_AMO_05_WERT | real | Gesamte DFT 0,5 Motorordnung (A2L-Name: Amo_05) AMO_05 |
| STAT_AMO_10_WERT | real | Gesamte DFT 1,0 Motorordnung (A2L-Name: Amo_10) AMO_10 |
| STAT_AMO_15_WERT | real | Gesamte DFT 1,5 Motorordnung (A2L-Name: Amo_15) AMO_15 |
| STAT_AMO_20_WERT | real | Gesamte DFT 2,0 Motorordnung (A2L-Name: Amo_20) AMO_20 |
| STAT_EXWINKKOR_WERT | real | Korrekturwinkel Excenterwelle zur Hubkorrektur (A2L-Name: Exwinkkor) EXWINKKOR |
| STAT_EXWINKKOR_EINH | string | degree |
| STAT_ZYLHUBKOR | unsigned long | Fuer Hubkorrektur ausgewaehlter Zylinder (A2L-Name: Zylhubkor) ZYLHUBKOR |
| STAT_MINHUB_WERT | real | Tatsaechlich wirksamer Minhub (nach Ein-/Ausblendungsfakoren) (A2L-Name: Minhub) MINHUB |
| STAT_MINHUB_EINH | string | mm |
| STAT_F_MINHUB_WERT | real | Faktor Ein-/Ausblendung Minhub ueber Tmot und Nkw (A2L-Name: F_minhub) F_MINHUB |
| STAT_MINHUB_ROH_WERT | real | Minhubrohwert aus Adaption (A2L-Name: Minhub_roh) MINHUB_ROH |
| STAT_MINHUB_ROH_EINH | string | mm |
| STAT_MINHUBVS_WERT | real | Vorgabe Minhub ueber Tester (A2L-Name: Minhubvs) MINHUBVS |
| STAT_MINHUBVS_EINH | string | mm |
| STAT_MINHUBVS_IST_WERT | real | Tatsaechlich wirksamer Minhub aus Verstelleingriff (vor Ein-/Ausblendungsfaktoren) (A2L-Name: Minhubvs_ist) MINHUBVS_IST |
| STAT_MINHUBVS_IST_EINH | string | mm |
| STAT_MINHUBVSNV_WERT | real | dauerhaft fest programmierter Minhub (A2L-Name: Minhubvsnv) MINHUBVSNV |
| STAT_MINHUBVSNV_EINH | string | mm |
| STAT_S_VSMNHB | unsigned long | Schalter fuer Testereingriff (A2L-Name: S_vsmnhb) S_VSMNHB |
| STAT_S_VSMNHBNV | unsigned long | Schalter fuer Testereingriff (A2L-Name: S_vsmnhbnv) S_VSMNHBNV |
| STAT_F_TIKORRVR_0_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[0] |
| STAT_LURABS_F_0_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[0] |
| STAT_LURDIF_F_0_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[0] |
| STAT_ZW_OFFKORRVR_0_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[0] |
| STAT_ZW_OFFKORRVR_0_EINH | string | degree |
| STAT_F_TIKORRVR_1_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[1] |
| STAT_LURABS_F_1_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[1] |
| STAT_LURDIF_F_1_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[1] |
| STAT_ZW_OFFKORRVR_1_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[1] |
| STAT_ZW_OFFKORRVR_1_EINH | string | degree |
| STAT_F_TIKORRVR_2_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[2] |
| STAT_LURABS_F_2_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[2] |
| STAT_LURDIF_F_2_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[2] |
| STAT_ZW_OFFKORRVR_2_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[2] |
| STAT_ZW_OFFKORRVR_2_EINH | string | degree |
| STAT_F_TIKORRVR_3_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[3] |
| STAT_LURABS_F_3_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[3] |
| STAT_LURDIF_F_3_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[3] |
| STAT_ZW_OFFKORRVR_3_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[3] |
| STAT_ZW_OFFKORRVR_3_EINH | string | degree |
| STAT_F_TIKORRVR_4_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[4] |
| STAT_LURABS_F_4_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[4] |
| STAT_LURDIF_F_4_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[4] |
| STAT_ZW_OFFKORRVR_4_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[4] |
| STAT_ZW_OFFKORRVR_4_EINH | string | degree |
| STAT_F_TIKORRVR_5_WERT | real | Zylinderselektive Gemischkorrektur (A2L-Name: F_tikorrvr) F_TIKORRVR_[5] |
| STAT_LURABS_F_5_WERT | real | gefilterte Laufunruhedeltas eines Zylinders (A2L-Name: Lurabs_f) LURABS_F_[5] |
| STAT_LURDIF_F_5_WERT | real | gefilterte mittlere Abweichung des Lur-Wertes (A2L-Name: Lurdif_f) LURDIF_F_[5] |
| STAT_ZW_OFFKORRVR_5_WERT | real | Zuendwinkeloffset fuer Verbrennungsregelung (A2L-Name: Zw_offkorrvr) ZW_OFFKORRVR_[5] |
| STAT_ZW_OFFKORRVR_5_EINH | string | degree |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_MIL
0x30D401 MIL (Malfunction Indicator Lamp) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_MIL | unsigned long | Status MIL (Malfunction Indicator Lamp) LV_MIL |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_MOTORTEMPERATUR
0x300C01 Motortemperatur auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_TMOT_WERT | real | ADC-Wert Motortemperatur V_TCO |
| STAT_ADC_TMOT_EINH | string | V |
| STAT_MOTORTEMPERATUR_WERT | real | Temperatur Motortemperatur TCO_MES |
| STAT_MOTORTEMPERATUR_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_ODS
0x300501 Oeldruckschalter auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_ODS | unsigned long | Status Oeldruckschalter LV_POIL_SWI |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_OEL
0x300E01 Oelsensor auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_TOEL_WERT | real | Oeltemperatur TOEL |
| STAT_PHY_TOEL_EINH | string | degreeC |
| STAT_PHY_NIVOEL_WERT | real | Oelniveau OZ_NIVAKT |
| STAT_PHY_QOEL_WERT | real | Oelqualitaet OZ_PERMAKT |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_PWG_POTI_SPANNUNG
0x302801 Fahrerwunsch 1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PWG_POTI_SPANNUNG_1_WERT | real | ADC-Wert Fahrerwunsch 1 V_PVS_1 |
| STAT_PWG_POTI_SPANNUNG_1_EINH | string | V |
| STAT_STAT_PWG1_WERT | real | Status Fahrerwunsch 1 PV_AV_1 |
| STAT_STAT_PWG1_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_PWG2
0x302901 Fahrerwunsch 2 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_PWG2_WERT | real | ADC-Wert Fahrerwunsch 2 V_PVS_2 |
| STAT_ADC_PWG2_EINH | string | V |
| STAT_STAT_PWG2_WERT | real | Status Fahrerwunsch 2 PV_AV_2 |
| STAT_STAT_PWG2_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_RBMMODE9
0x224026 Rate Based Monitoring Mode 9 auslesen (Ausgabe der Werte wie im Scantool Mode 9) Typ1 Gesetz
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_OBDCOND | unsigned long | OBD Monitoring Conditions Encountered Counts (general denominator) CTR_CDN_OBD_RBM |
| STAT_IGNCNTR | unsigned long | Ignition Counter CTR_IGK_CYC_RBM |
| STAT_CATCOMP1 | unsigned long | Catalyst Monitor Completion Counts Bank 1 (Numerator) CTR_COMP_RBM_CAT_DIAG_1 |
| STAT_CATCOND1 | unsigned long | Catalyst Monitor Conditions Encountered Counts Bank 1 (Denominator) CTR_CDN_RBM_CAT_DIAG_1 |
| STAT_CATCOMP2 | unsigned long | Catalyst Monitor Completion Counts Bank 2 (Numerator) CTR_COMP_RBM_CAT_DIAG_2 |
| STAT_CATCOND2 | unsigned long | Catalyst Monitor Conditions Encountered Counts Bank 2 (Denominator) CTR_CDN_RBM_CAT_DIAG_2 |
| STAT_O2SCOMP1 | unsigned long | O2 Sensor Monitor Completion Counts Bank 1 (Numerator) 2BYTE in 0 bis 65534 |
| STAT_O2SCOND1 | unsigned long | O2 Sensor Monitor Conditions Encountered Counts Bank 1 (Denominator) 2BYTE in 0 bis 65534 |
| STAT_O2SCOMP2 | unsigned long | O2 Sensor Monitor Completion Counts Bank 2 (Numerator) 2BYTE in 0 bis 65534 |
| STAT_O2SCOND2 | unsigned long | O2 Sensor Monitor Conditions Encountered Counts Bank 2 (Denominator) 2BYTE in 0 bis 65534 |
| STAT_EGRCOMP | unsigned long | EGR Monitor Completion Condition Counts (Numerator) 2BYTE in 0 bis 65534 |
| STAT_EGRCOND | unsigned long | EGR Monitor Conditions Encountered Counts (Denominator) 2BYTE in 0 bis 65534 |
| STAT_AIRCOMP1 | unsigned long | AIR Monitor Completion Condition Counts Bank 1 (Secondary Air) (Numerator) 2BYTE in 0 bis 65534 |
| STAT_AIRCOND1 | unsigned long | AIR Monitor Conditions Encountered Counts Bank 1 (Secondary Air) (Denominator) 2BYTE in 0 bis 65534 |
| STAT_AIRCOMP2 | unsigned long | AIR Monitor Completion Condition Counts Bank 2 (Secondary Air) (Numerator) 2BYTE in 0 bis 65534 |
| STAT_AIRCOND2 | unsigned long | AIR Monitor Conditions Encountered Counts Bank 2 (Secondary Air) (Denominator) 2BYTE in 0 bis 65534 |
| STAT_EVAPCOMP | unsigned long | EVAP Monitor Completion Condition Counts (Numerator) 2BYTE in 0 bis 65534 |
| STAT_EVAPCOND | unsigned long | EVAP Monitor Conditions Encountered Counts (Denominator) 2BYTE in 0 bis 65534 |
| STAT_VVTCOMP1 | unsigned long | Variable Valve Timing (VANOS) Monitor Completion Condition Counts Bank 1 (Numerator) 2BYTE in 0 bis 65534 |
| STAT_VVTCOND1 | unsigned long | Variable Valve Timing (VANOS) Monitor Conditions Encountered Counts Bank 1 (Denominator) 2BYTE in 0 bis 65534 |
| STAT_VVTCOMP2 | unsigned long | Variable Valve Timing (VANOS) Monitor Completion Condition Counts Bank 2 (Numerator) 2BYTE in 0 bis 65534 |
| STAT_VVTCOND2 | unsigned long | Variable Valve Timing (VANOS) Monitor Conditions Encountered Counts Bank 2 (Denominator) 2BYTE in 0 bis 65534 |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_RBMMS1
0x224027 Rate Based Monitoring Motorsteuerung MSV70 Type1 detailiert auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_CTR_COMP_RBM_CAT_DIAG_1 | unsigned long | Diagnose Katalysator Sauerstoffspeicherfaehigkeit Bank 1 (Numerator) CTR_COMP_RBM_CAT_DIAG_1 |
| STAT_CTR_CDN_RBM_CAT_DIAG_1 | unsigned long | Diagnose Katalysator Sauerstoffspeicherfaehigkeit Bank 1 (Denominator) CTR_CDN_RBM_CAT_DIAG_1 |
| STAT_CTR_COMP_RBM_CAT_DIAG_2 | unsigned long | Diagnose Katalysator Sauerstoffspeicherfaehigkeit Bank 2 (Numerator) CTR_COMP_RBM_CAT_DIAG_2 |
| STAT_CTR_CDN_RBM_CAT_DIAG_2 | unsigned long | Diagnose Katalysator Sauerstoffspeicherfaehigkeit Bank 2 (Denominator) CTR_CDN_RBM_CAT_DIAG_2 |
| STAT_CTR_COMP_RBM_DYN_VLD_LS_UP_1 | unsigned long | Diagnose Dynamikpruefung lineare Lamdasonden Bank 1 (Numerator) CTR_COMP_RBM_DYN_VLD_LS_UP_1 |
| STAT_CTR_CDN_RBM_DYN_VLD_LS_UP_1 | unsigned long | Diagnose Dynamikpruefung lineare Lamdasonden Bank 1 (Denominator) CTR_CDN_RBM_DYN_VLD_LS_UP_1 |
| STAT_CTR_COMP_RBM_DYN_VLD_LS_UP_2 | unsigned long | Diagnose Dynamikpruefung lineare Lamdasonden Bank 2 (Numerator) CTR_COMP_RBM_DYN_VLD_LS_UP_2 |
| STAT_CTR_CDN_RBM_DYN_VLD_LS_UP_2 | unsigned long | Diagnose Dynamikpruefung lineare Lamdasonden Bank 2 (Denominator) CTR_CDN_RBM_DYN_VLD_LS_UP_2 |
| STAT_CTR_COMP_RBM_SHIFT_AFL_LSL_UP_1 | unsigned long | Diagnose Lamdasondensignalverschiebung mager Bank 1 (Numerator) CTR_COMP_RBM_SHIFT_AFL_LSL_UP_1 |
| STAT_CTR_CDN_RBM_SHIFT_AFL_LSL_UP_1 | unsigned long | Diagnose Lamdasondensignalverschiebung mager Bank 1 (Denominator) CTR_CDN_RBM_SHIFT_AFL_LSL_UP_1 |
| STAT_CTR_COMP_RBM_SHIFT_AFL_LSL_UP_2 | unsigned long | Diagnose Lamdasondensignalverschiebung mager Bank 2 (Numerator) CTR_COMP_RBM_SHIFT_AFL_LSL_UP_2 |
| STAT_CTR_CDN_RBM_SHIFT_AFL_LSL_UP_2 | unsigned long | Diagnose Lamdasondensignalverschiebung mager Bank 2 (Denominator) CTR_CDN_RBM_SHIFT_AFL_LSL_UP_2 |
| STAT_CTR_COMP_RBM_SHIFT_AFR_LSL_UP_1 | unsigned long | Diagnose Lamdasondensignalverschiebung fett Bank 1 (Numerator) CTR_COMP_RBM_SHIFT_AFR_LSL_UP_1 |
| STAT_CTR_CDN_RBM_SHIFT_AFR_LSL_UP_1 | unsigned long | Diagnose Lamdasondensignalverschiebung fett Bank 1 (Denominator) CTR_CDN_RBM_SHIFT_AFR_LSL_UP_1 |
| STAT_CTR_COMP_RBM_SHIFT_AFR_LSL_UP_2 | unsigned long | Diagnose Lamdasondensignalverschiebung fett Bank 2 (Numerator) CTR_COMP_RBM_SHIFT_AFR_LSL_UP_2 |
| STAT_CTR_CDN_RBM_SHIFT_AFR_LSL_UP_2 | unsigned long | Diagnose Lamdasondensignalverschiebung fett Bank 2 (Denominator) CTR_CDN_RBM_SHIFT_AFR_LSL_UP_2 |
| STAT_CTR_COMP_RBM_AIR_LSL_UP_1 | unsigned long | Diagnose lineare Lamdasonde korrekt verbaut Bank 1 (Numerator) CTR_COMP_RBM_AIR_LSL_UP_1 |
| STAT_CTR_CDN_RBM_AIR_LSL_UP_1 | unsigned long | Diagnose lineare Lamdasonde korrekt verbaut Bank 1 (Denominator) CTR_CDN_RBM_AIR_LSL_UP_1 |
| STAT_CTR_COMP_RBM_AIR_LSL_UP_2 | unsigned long | Diagnose lineare Lamdasonde korrekt verbaut Bank 2 (Numerator) CTR_COMP_RBM_AIR_LSL_UP_2 |
| STAT_CTR_CDN_RBM_AIR_LSL_UP_2 | unsigned long | Diagnose lineare Lamdasonde korrekt verbaut Bank 2 (Denominator) CTR_CDN_RBM_AIR_LSL_UP_2 |
| STAT_CTR_COMP_RBM_DIAGCPS | unsigned long | Diagnose Tankentlueftungssystem (Numerator) CTR_COMP_RBM_DIAGCPS |
| STAT_CTR_CDN_RBM_DIAGCPS | unsigned long | Diagnose Tankentlueftungssystem (Denominator) CTR_CDN_RBM_DIAGCPS |
| STAT_CTR_COMP_RBM_SMALL_LEAK | unsigned long | Diagnose Tankfeinleckpruefung (DMTL) (Numerator) CTR_COMP_RBM_SMALL_LEAK |
| STAT_CTR_CDN_RBM_SMALL_LEAK | unsigned long | Diagnose Tankfeinleckpruefung (DMTL) (Denominator) CTR_CDN_RBM_SMALL_LEAK |
| STAT_CTR_COMP_RBM_ROUGH_LEAK | unsigned long | Diagnose Tankgrobleckpruefung (DMTL) (Numerator) CTR_COMP_RBM_ROUGH_LEAK |
| STAT_CTR_CDN_RBM_ROUGH_LEAK | unsigned long | Diagnose Tankgrobleckpruefung (DMTL) (Denominator) CTR_CDN_RBM_ROUGH_LEAK |
| STAT_CTR_COMP_RBM_DMTLM | unsigned long | Diagnosemodul Tankleckage (DMTL) (Numerator) CTR_COMP_RBM_DMTLM |
| STAT_CTR_CDN_RBM_DMTLM | unsigned long | Diagnosemodul Tankleckage (DMTL) (Denominator) CTR_CDN_RBM_DMTLM |
| STAT_CTR_COMP_RBM_REF_CRK_CAM_IN_1 | unsigned long | Diagnose Veraenderung der Steuerzeiten Nockenwelleneinlass (Numerator) CTR_COMP_RBM_REF_CRK_CAM_IN_1 |
| STAT_CTR_CDN_RBM_REF_CRK_CAM_IN_1 | unsigned long | Diagnose Veraenderung der Steuerzeiten Nockenwelleneinlass (Denominator) CTR_CDN_RBM_REF_CRK_CAM_IN_1 |
| STAT_CTR_COMP_RBM_REF_CRK_CAM_EX_1 | unsigned long | Diagnose Veraenderung der Steuerzeiten Nockenwellenauslass (Numerator) CTR_COMP_RBM_REF_CRK_CAM_EX_1 |
| STAT_CTR_CDN_RBM_REF_CRK_CAM_EX_1 | unsigned long | Diagnose Veraenderung der Steuerzeiten Nockenwellenauslass (Denominator) CTR_CDN_RBM_REF_CRK_CAM_EX_1 |
| STAT_CTR_COMP_RBM_MEC_IVVT_IN | unsigned long | Diagnose mechanische Schwergaengigkeit VANOS (Einlass) (Numerator) CTR_COMP_RBM_MEC_IVVT_IN |
| STAT_CTR_CDN_RBM_MEC_IVVT_IN | unsigned long | Diagnose mechanische Schwergaengigkeit VANOS (Einlass) (Denominator) CTR_CDN_RBM_MEC_IVVT_IN |
| STAT_CTR_COMP_RBM_MEC_IVVT_EX | unsigned long | Diagnose mechanische Schwergaengigkeit VANOS (Auslass) (Numerator) CTR_COMP_RBM_MEC_IVVT_EX |
| STAT_CTR_CDN_RBM_MEC_IVVT_EX | unsigned long | Diagnose mechanische Schwergaengigkeit VANOS (Auslass) (Denominator) CTR_CDN_RBM_MEC_IVVT_EX |
| STAT_CTR_COMP_RBM_SA_SYS | unsigned long | Diagnose Sekundaerluftsystem (Numerator) CTR_COMP_RBM_SA_SYS |
| STAT_CTR_CDN_RBM_SA_SYS | unsigned long | Diagnose Sekundaerluftsystem (Denominator) CTR_CDN_RBM_SA_SYS |
| STAT_CTR_COMP_RBM_SA_SAFM | unsigned long | Diagnose Sekundaerluftsystem Heissfilmluftmassenmesser (Mini-HFM) (Numerator) CTR_COMP_RBM_SA_SAFM |
| STAT_CTR_CDN_RBM_SA_SAFM | unsigned long | Diagnose Sekundaerluftsystem Heissfilmluftmassenmesser (Mini-HFM) (Denominator) CTR_CDN_RBM_SA_SAFM |
| STAT_CTR_COMP_RBM_SA_SAV | unsigned long | Diagnose Sekundaerluftventil (Numerator) CTR_COMP_RBM_SA_SAV |
| STAT_CTR_CDN_RBM_SA_SAV | unsigned long | Diagnose Sekundaerluftventil (Denominator) CTR_CDN_RBM_SA_SAV |
| STAT_CTR_COMP_RBM_SA_SAP | unsigned long | Diagnose Sekundaerluftpumpe (Numerator) CTR_COMP_RBM_SA_SAP |
| STAT_CTR_CDN_RBM_SA_SAP | unsigned long | Diagnose Sekundaerluftpumpe (Denominator) CTR_CDN_RBM_SA_SAP |
| STAT_CTR_COMP_RBM_SA_SAV_LSL | unsigned long | Diagnose Sekundaerluftsystem durch Signalaenderung Lambdasonde vor Katalysator Bank 1 und 2 (Numerator) CTR_COMP_RBM_SA_SAV_LSL |
| STAT_CTR_CDN_RBM_SA_SAV_LSL | unsigned long | Diagnose Sekundaerluftsystem durch Signalaenderung Lambdasonde vor Katalysator Bank 1 und 2 (Denominator) CTR_CDN_RBM_SA_SAV_LSL |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_RBMMS2
0x224028 Rate Based Monitoring Motorsteuerung MSV70 Type2 auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_CTR_COMP_RBM_TH | unsigned long | Diagnose Thermostat (Numerator) CTR_COMP_RBM_TH |
| STAT_CTR_CDN_RBM_TH | unsigned long | Diagnose Thermostat (Denominator) CTR_CDN_RBM_TH |
| STAT_CTR_COMP_RBM_TCO_PLAUS | unsigned long | Diagnose Motortemperatur Plausibilitaet (Numerator) CTR_COMP_RBM_TCO_PLAUS |
| STAT_CTR_CDN_RBM_TCO_PLAUS | unsigned long | Diagnose Motortemperatur Plausibilitaet (Denominator) CTR_CDN_RBM_TCO_PLAUS |
| STAT_CTR_COMP_RBM_TCO_STUCK | unsigned long | Diagnose Motortemperatur haengendes Sensorsignal (Numerator) CTR_COMP_RBM_TCO_STUCK |
| STAT_CTR_CDN_RBM_TCO_STUCK | unsigned long | Diagnose Motortemperatur haengendes Sensorsignal (Denominator) CTR_CDN_RBM_TCO_STUCK |
| STAT_CTR_COMP_RBM_TCO_2_PLAUS | unsigned long | Diagnose Kuehlerauslasstemperatur Plausibilitaet (Numerator) CTR_COMP_RBM_TCO_2_PLAUS |
| STAT_CTR_CDN_RBM_TCO_2_PLAUS | unsigned long | Diagnose Kuehlerauslasstemperatur Plausibilitaet (Denominator) CTR_CDN_RBM_TCO_2_PLAUS |
| STAT_CTR_COMP_RBM_TAM_PLAUS | unsigned long | Diagnose Umgebungstemperatur Plausibilitaet (Numerator) CTR_COMP_RBM_TAM_PLAUS |
| STAT_CTR_CDN_RBM_TAM_PLAUS | unsigned long | Diagnose Umgebungstemperatur Plausibilitaet (Denominator) CTR_CDN_RBM_TAM_PLAUS |
| STAT_CTR_COMP_RBM_VS_PLAUS | unsigned long | Diagnose Geschwindigkeit Plausibilitaet (Numerator) CTR_COMP_RBM_VS_PLAUS |
| STAT_CTR_CDN_RBM_VS_PLAUS | unsigned long | Diagnose Geschwindigkeit Plausibilitaet (Denominator) CTR_CDN_RBM_VS_PLAUS |
| STAT_CTR_COMP_RBM_FTL_OBD | unsigned long | Diagnose Tankfuellstand (Numerator) CTR_COMP_RBM_FTL_OBD |
| STAT_CTR_CDN_RBM_FTL_OBD | unsigned long | Diagnose Tankfuellstand (Denominator) CTR_CDN_RBM_FTL_OBD |
| STAT_CTR_COMP_RBM_OBD_LSH_DOWN_1 | unsigned long | Diagnose Lamdasondenheizung nach Katalysator Bank 1 (Numerator) CTR_COMP_RBM_OBD_LSH_DOWN_1 |
| STAT_CTR_CDN_RBM_OBD_LSH_DOWN_1 | unsigned long | Diagnose Lamdasondenheizung nach Katalysator Bank 1 (Denominator) CTR_CDN_RBM_OBD_LSH_DOWN_1 |
| STAT_CTR_COMP_RBM_OBD_LSH_DOWN_2 | unsigned long | Diagnose Lamdasondenheizung nach Katalysator Bank 2 (Numerator) CTR_COMP_RBM_OBD_LSH_DOWN_2 |
| STAT_CTR_CDN_RBM_OBD_LSH_DOWN_2 | unsigned long | Diagnose Lamdasondenheizung nach Katalysator Bank 2 (Denominator) CTR_CDN_RBM_OBD_LSH_DOWN_2 |
| STAT_CTR_COMP_RBM_OBD_VLD_LSH_UP_1 | unsigned long | Diagnose Alterung lineare Lamdasonde Bank 1 (Numerator) CTR_COMP_RBM_OBD_VLD_LSH_UP_1 |
| STAT_CTR_CDN_RBM_OBD_VLD_LSH_UP_1 | unsigned long | Diagnose Alterung lineare Lamdasonde Bank 1 (Denominator) CTR_CDN_RBM_OBD_VLD_LSH_UP_1 |
| STAT_CTR_COMP_RBM_OBD_VLD_LSH_UP_2 | unsigned long | Diagnose Alterung lineare Lamdasonde Bank 2 (Numerator) CTR_COMP_RBM_OBD_VLD_LSH_UP_2 |
| STAT_CTR_CDN_RBM_OBD_VLD_LSH_UP_2 | unsigned long | Diagnose Alterung lineare Lamdasonde Bank 2 (Denominator) CTR_CDN_RBM_OBD_VLD_LSH_UP_2 |
| STAT_CTR_COMP_RBM_CS | unsigned long | Diagnose Kupplungsschalter (Numerator) CTR_COMP_RBM_CS |
| STAT_CTR_CDN_RBM_CS | unsigned long | Diagnose Kupplungsschalter (Denominator) CTR_CDN_RBM_CS |
| STAT_CTR_COMP_RBM_ISC | unsigned long | Diagnose Leerlaufregler (Numerator) CTR_COMP_RBM_ISC |
| STAT_CTR_CDN_RBM_ISC | unsigned long | Diagnose Leerlaufregler (Denominator) CTR_CDN_RBM_ISC |
| STAT_CTR_COMP_RBM_MAF | unsigned long | Diagnose Luftmassenmesser (Numerator) CTR_COMP_RBM_MAF |
| STAT_CTR_CDN_RBM_MAF | unsigned long | Diagnose Luftmassenmesser (Denominator) CTR_CDN_RBM_MAF |
| STAT_CTR_COMP_RBM_TIA_PLAUS | unsigned long | Diagnose Ansauglufttemperatur Plausibilitaet (Numerator) CTR_COMP_RBM_TIA_PLAUS |
| STAT_CTR_CDN_RBM_TIA_PLAUS | unsigned long | Diagnose Ansauglufttemperatur Plausibilitaet (Denominator) CTR_CDN_RBM_TIA_PLAUS |
| STAT_CTR_COMP_RBM_AMP_PLAUS | unsigned long | Diagnose Umgebungsdruck Plausibilitaet (Numerator) CTR_COMP_RBM_AMP_PLAUS |
| STAT_CTR_CND_RBM_AMP_PLAUS | unsigned long | Diagnose Umgebungsdruck Plausibilitaet (Denominator) CTR_CDN_RBM_AMP_PLAUS |
| STAT_CTR_COMP_RBM_LOAD_TPS_PLAUS | unsigned long | Diagnose Plausibilitaet Drosselklappeposition zu Signal Luftmassenmesser (Numerator) CTR_COMP_RBM_LOAD_TPS_PLAUS |
| STAT_CTR_CDN_RBM_LOAD_TPS_PLAUS | unsigned long | Diagnose Plausibilitaet Drosselklappeposition zu Signal Luftmassenmesser (Denominator) CTR_CDN_RBM_LOAD_TPS_PLAUS |
| STAT_CTR_COMP_RBM_MAP_DIP_PLAUS | unsigned long | Diagnose Differenzdrucksensor Sauganlage zu Umgebung Plausibilitaet (Numerator) CTR_COMP_RBM_MAP_DIP_PLAUS |
| STAT_CTR_CDN_RBM_MAP_DIP_PLAUS | unsigned long | Diagnose Differenzdrucksensor Sauganlage zu Umgebung Plausibilitaet (Denominator) CTR_CDN_RBM_MAP_DIP_PLAUS |
| STAT_CTR_COMP_RBM_VLS_DOWN_DIF_1 | unsigned long | Diagnose Abweichung Lambdaregelung Bank 1 (Numerator) CTR_COMP_RBM_VLS_DOWN_DIF_1 |
| STAT_CTR_CDN_RBM_VLS_DOWN_DIF_1 | unsigned long | Diagnose Abweichung Lambdaregelung Bank 1 (Denominator) CTR_CDN_RBM_VLS_DOWN_DIF_1 |
| STAT_CTR_COMP_RBM_VLS_DOWN_DIF_2 | unsigned long | Diagnose Abweichung Lambdaregelung Bank 2 (Numerator) CTR_COMP_RBM_VLS_DOWN_DIF_2 |
| STAT_CTR_CDN_RBM_VLS_DOWN_DIF_2 | unsigned long | Diagnose Abweichung Lambdaregelung Bank 2 (Denominator) CTR_CDN_RBM_VLS_DOWN_DIF_2 |
| STAT_CTR_COMP_RBM_CHK_LS_DOWN_1 | unsigned long | Diagnose binaere Lamdasonde nach Katalysator Bank 1 (Numerator) CTR_COMP_RBM_CHK_LS_DOWN_1 |
| STAT_CTR_CDN_RBM_CHK_LS_DOWN_1 | unsigned long | Diagnose binaere Lamdasonde nach Katalysator Bank 1 (Denominator) CTR_CDN_RBM_CHK_LS_DOWN_1 |
| STAT_CTR_COMP_RBM_CHK_LS_DOWN_2 | unsigned long | Diagnose binaere Lamdasonde nach Katalysator Bank 2 (Numerator) CTR_COMP_RBM_CHK_LS_DOWN_2 |
| STAT_CTR_CDN_RBM_CHK_LS_DOWN_2 | unsigned long | Diagnose binaere Lamdasonde nach Katalysator Bank 2 (Denominator) CTR_CDN_RBM_CHK_LS_DOWN_2 |
| STAT_CTR_COMP_RBM_SWT_LS_DOWN_1 | unsigned long | Diagnose Schaltzeit binaere Lamdasonde Bank 1 (Numerator) CTR_COMP_RBM_SWT_LS_DOWN_1 |
| STAT_CTR_CDN_RBM_SWT_LS_DOWN_1 | unsigned long | Diagnose Schaltzeit binaere Lamdasonde Bank 1 (Denominator) CTR_CDN_RBM_SWT_LS_DOWN_1 |
| STAT_CTR_COMP_RBM_SWT_LS_DOWN_2 | unsigned long | Diagnose Schaltzeit binaere Lamdasonde Bank 2 (Numerator) CTR_COMP_RBM_SWT_LS_DOWN_2 |
| STAT_CTR_CDN_RBM_SWT_LS_DOWN_2 | unsigned long | Diagnose Schaltzeit binaere Lamdasonde Bank 2 (Denominator) CTR_CDN_RBM_SWT_LS_DOWN_2 |
| STAT_CTR_COMP_RBM_T_ES | unsigned long | Diagnose Abstellzeit (Numerator) CTR_COMP_RBM_T_ES |
| STAT_CTR_CDN_RBM_T_ES | unsigned long | Diagnose Abstellzeit (Denominator) CTR_CDN_RBM_T_ES |
| STAT_CTR_COMP_RBM_TPS | unsigned long | Diagnose Drosselklappenlagesensoren (Numerator) CTR_COMP_RBM_TPS |
| STAT_CTR_CDN_RBM_TPS | unsigned long | Diagnose Drosselklappenlagesensoren (Denominator) CTR_CDN_RBM_TPS |
| STAT_CTR_COMP_RBM_ANG_INST_AD_VVL | unsigned long | Diagnose Adaption Excenterwellensensor (Numerator) CTR_COMP_RBM_ANG_INST_AD_VVL |
| STAT_CTR_CDN_RBM_ANG_INST_AD_VVL | unsigned long | Diagnose Adaption Excenterwellensensor (Denominator) CTR_CDN_RBM_ANG_INST_AD_VVL |
| STAT_CTR_COMP_RBM_ANG_CHK_MAX_VVL | unsigned long | Diagnose maximaler Hub VVT (Numerator) CTR_COMP_RBM_ANG_CHK_MAX_VVL |
| STAT_CTR_CDN_RBM_ANG_CHK_MAX_VVL | unsigned long | Diagnose maximaler Hub VVT (Denominator) CTR_CDN_RBM_ANG_CHK_MAX_VVL |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SDF1
0x301801 Saugrohrdruck1 / Ladedruck1 auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_SDF1_WERT | real | ADC-Wert Saugrohrdruck1 / Ladedruck1 V_MAP |
| STAT_ADC_SDF1_EINH | string | V |
| STAT_PHY_SDF1_WERT | real | Druck Saugrohrdruck1 / Ladedruck1 MAP_DIP_MES_BAS |
| STAT_PHY_SDF1_EINH | string | hPa |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SLP
0x30CB01 Sekundaerluftpumpe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_SLP | unsigned long | Status Sekundaerluftpumpe LV_SAP |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SLV
0x30CA01 Sekundarluftventil auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_SLV | unsigned long | Status Sekundarluftventil LV_SAV |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SOK
0x30C201 Soundklappe auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_SOK | unsigned long | Status Soundklappe LV_SOF |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SPT
0x300601 Sporttaster auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_SPT_WERT | real | ADC-Wert Sporttaster V_SOF_SWI |
| STAT_ADC_SPT_EINH | string | V |
| STAT_STAT_SPT | unsigned long | Status Sporttaster LV_SOF_SWI |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SR
0x30C401 Startrelais auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_SR | unsigned long | Status Startrelais LV_RLY_ST |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_TEV
0x30CF01 Tankentlueftungsventil auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_TEV_WERT | real | Status Tankentlueftungsventil CPPWM_CPS |
| STAT_STAT_TEV_EINH | string | percent |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_TKA
0x300D01 Kuehlerauslasstemperatur auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_TKA_WERT | real | ADC-Wert Kuehlerauslasstemperatur V_TCO_2 |
| STAT_ADC_TKA_EINH | string | V |
| STAT_PHY_TKA_WERT | real | Temperatur Kuehlerauslasstemperatur TCO_2_MES |
| STAT_PHY_TKA_EINH | string | degreeC |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_TTEMP
0x302F01 Taster Tempomat auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_TTEMP_TEXT | string | BITFELD Taster Tempomat STATE_MSW_CAN |
| STAT_STAT_TTEMP_WERT | int | |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UBAT
0x302701 Batteriesensor auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_UBAT_WERT | real | ADC-Wert Batteriesensor VB_BAS |
| STAT_ADC_UBAT_EINH | string | V |
| STAT_PHY_UBAT_WERT | real | Spannung Batteriesensor U_BATT |
| STAT_PHY_UBAT_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UBATT
0x301C01 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_UVSG_WERT | real | ADC-Wert Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) VB_BAS |
| STAT_ADC_UVSG_EINH | string | V |
| STAT_UBATT_WERT | real | Spannung Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) VB |
| STAT_UBATT_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UDF
0x301701 Umgebungsdruck auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_UDF_WERT | real | ADC-Wert Umgebungsdruck V_AMP |
| STAT_ADC_UDF_EINH | string | V |
| STAT_PHY_UDF_WERT | real | Druck Umgebungsdruck AMP_MES |
| STAT_PHY_UDF_EINH | string | hPa |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UGEN
0x303201 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PHY_UGEN_WERT | real | Spannung Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) V_ALTER_SP |
| STAT_PHY_UGEN_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UKL15
0x301B01 Kl.15 Spannung auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_UKL15_WERT | real | ADC-Wert Kl.15 Spannung V_IGK_BAS |
| STAT_ADC_UKL15_EINH | string | V |
| STAT_PHY_UKL15_WERT | real | Spannung Kl.15 Spannung V_IGK_MES |
| STAT_PHY_UKL15_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_UVLSS
0x302001 Versorgungsspannung Lastsignal-Sensor auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_ADC_UVLSS_WERT | real | ADC-Wert Versorgungsspannung Lastsignal-Sensor V_VCC_SENS_VVL_RAW |
| STAT_ADC_UVLSS_EINH | string | V |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_VVT
0x30DD01 VVT auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_VVT_WERT | real | Status VVT ANG_EXC_VVL |
| STAT_STAT_VVT_EINH | string | Grad |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_VVTR
0x30DC01 VVT-Entlastungsrelais auslesen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_STAT_VVTR | unsigned long | Status VVT-Entlastungsrelais LV_STATE_RLY_VVL |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_AGK
0x30C107 Abgasklappe ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_AGK_WERT | unsigned long | Sollwert LV_ACT_EF_EXT_ADJ |
| SW_TO_AGK_WERT | unsigned long | Timeout 0 bis 508s 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ANWS
0x30EE07 Vanos Auslass Ventil ansteuern CON_N_MIN nur bei erhoeter Motordrehzahl
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_ANWS_WERT | real | Sollwert Vanos_A Ventil CAM_SP_EX_EXT_ADJ |
| SW_TO_ANWS_WERT | unsigned long | Timeout Vanos_A Ventil 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_CO_ABGLEICH_PROGRAMMIEREN
0x2E5FF108 Abgleichwert CO (Kohlenmonoxid) programmieren NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_CO_ABGLEICH_RESET
0x2E5FF104 Abgleichwert CO (Kohlenmonoxid) loeschen NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_CO_ABGLEICH_VERSTELLEN
0x2E5FF107 Abgleichwert CO (Kohlenmonoxid) vorgeben NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| STAT_CO_ABGLEICH_WERT | real | Abgleichwert CO (Kohlenmonoxid) FAC_MFF_ADD_EXT_ADJ |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DISA
0x30C607 Variable Sauganlage (DISA) Klappe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DISA_WERT | unsigned long | Sollwert Variable Sauganlage (DISA) Klappe LV_VIM_1_EXT_ADJ |
| SW_TO_DISA_WERT | unsigned long | Timeout Variable Sauganlage (DISA) Klappe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DISA2
0x30AE07 Variable Sauganlage (DISA) Klappe2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DISA2_WERT | unsigned long | Sollwert Variable Sauganlage (DISA) Klappe2 LV_ACT_VIM_2_EXT_ADJ |
| SW_TO_DISA2_WERT | unsigned long | Timeout Variable Sauganlage (DISA) Klappe2 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DK
0x302A07 Drosselklappe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DK_WERT | real | Sollwert Drosselklappe TPS_SP_EXT_ADJ |
| SW_TO_DK_WERT | unsigned long | Timeout Drosselklappe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DMTL_HEIZUNG
0x30CE07 Diagnosemodul-Tank Leckage Heizung ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DMTLH_WERT | unsigned long | Sollwert Diagnosemodul-Tank Leckage Heizung LV_ACT_DMTLH_EXT_ADJ |
| SW_TO_DMTLH_WERT | unsigned long | Timeout Diagnosemodul-Tank Leckage Heizung 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DMTL_P
0x30CC07 Diagnosemodul-Tank Leckage Pumpe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DMTL_P_WERT | unsigned long | Sollwert Diagnosemodul-Tank Leckage Pumpe LV_ACT_DMTL_PUMP_EXT_ADJ |
| SW_TO_DMTL_P_WERT | unsigned long | Timeout Diagnosemodul-Tank Leckage Pumpe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_DMTL_V
0x30CD07 Diagnosemodul-Tank Leckage Ventil ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_DMTL_V_WERT | unsigned long | Sollwert Diagnosemodul-Tank Leckage Ventil LV_ACT_DMTLS_EXT_ADJ |
| SW_TO_DMTL_V_WERT | unsigned long | Timeout Diagnosemodul-Tank Leckage Ventil 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_E_LUEFTER
0x30DA07 E-Luefter ansteuern CON_ELUE nur bei Motortemperatur TMOT kleiner 115gradCelsius
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_ELUE_WERT | real | Tastverhaeltniss E-Luefter ECFPWM_ECF_EXT_ADJ |
| SW_TO_ELUE_WERT | unsigned long | Timeout E-Luefter 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EBL
0x30C807 E-Box-Luefter ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_EBL_WERT | unsigned long | Sollwert E-Box-Luefter LV_ACT_EBOX_CFA_EXT_ADJ |
| SW_TO_EBL_WERT | unsigned long | Timeout E-Box-Luefter 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EISYGD
0x31E1 Ansteuern Eisy-Adaptionswerte (gedrosselt) (Anforderung aus CP5403)
Arguments
| Name | Type | Comment |
|---|---|---|
| NKW_WERT | long | Drehzahl NKW |
| VSE_SPRI_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| VSA_SPRI_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| WDK_IST_WERT | real | Aktueller Drosselklappenwinkel WDK_IST |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EISYUGD
0x31E0 Ansteuern Eisy-Adaptionswerte (ungedrosselt) (Anforderung aus CP5403)
Arguments
| Name | Type | Comment |
|---|---|---|
| NKW_WERT | long | Drehzahl NKW |
| VSE_SPRI_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| VSA_SPRI_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| HUBEV_IST_WERT | real | Istwert Einlassventilhub HUBEV_IST |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EKP
0x30D807 Elektrische Kraftstoffpumpe 1 ansteuern Elektrische Kraftstoffpumpe 1 Deaktivierung aufheben N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_EKP1_WERT | unsigned long | Sollwert Elektrische Kraftstoffpumpe 1 (Ausnahme fuer Rueckwaertskompatibilitaet SGBD MSV70) 1BYTE 0x00-0xFF in 0 oder 1 |
| SW_TO_EKP1_WERT | unsigned long | Timeout Elektrische Kraftstoffpumpe 1 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EML
0x30D607 EML (Engine Malfunction Lamp) ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_EML_WERT | unsigned long | Sollwert EML (Engine Malfunction Lamp) LV_ACT_WAL_1_EXT_ADJ |
| SW_TO_EML_WERT | unsigned long | Timeout EML (Engine Malfunction Lamp) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_AGK
0x30C100 Abgasklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_ANWS
0x30EE00 Vanos Auslass Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DISA
0x30C600 Variable Sauganlage (DISA) Klappe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DISA2
0x30AE00 Variable Sauganlage (DISA) Klappe2 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DK
0x302A00 Drosselklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DMTL_HEIZUNG
0x30CE00 Diagnosemodul-Tank Leckage Heizung Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DMTL_P
0x30CC00 Diagnosemodul-Tank Leckage Pumpe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_DMTL_V
0x30CD00 Diagnosemodul-Tank Leckage Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_E_LUEFTER
0x30DA00 E-Luefter Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EBL
0x30C800 E-Box-Luefter Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EKP
0x30D800 Elektrische Kraftstoffpumpe 1 Ansteuerung beenden Elektrische Kraftstoffpumpe 1 Deaktivierung aufheben NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EML
0x30D600 EML (Engine Malfunction Lamp) Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_ENWS
0x30ED00 Vanos Einlass Ventil Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV1
0x30E100 Einspritzventil 1 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV2
0x30E200 Einspritzventil 2 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV3
0x30E300 Einspritzventil 3 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV4
0x30E400 Einspritzventil 4 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV5
0x30E500 Einspritzventil 5 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EV6
0x30E600 Einspritzventil 6 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_EWAP
0x30BF00 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_FGRL
0x30D500 Fahrgeschwindigkeitsregler-Lampe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_GLF
0x30C300 Gesteuerte Luftfuehrung Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_KFT
0x30C900 Kennfeldthermostat Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_KGEH
0x30AD00 Kurbelgehaeuseentlueftungsheizung Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_KOREL
0x30C700 Klimakompressor-Relais Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_LRP
0x2E5FF700 Laufruhepruefung Vorgeben beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_LSH1
0x30D000 Lambdasondenheizung vor Kat Bank1 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_LSH2
0x30D100 Lambdasondenheizung hinter Kat Bank1 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_LSH3
0x30D200 Lambdasondenheizung vor Kat Bank2 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_LSH4
0x30D300 Lambdasondenheizung hinter Kat Bank2 Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_MIL
0x30D400 MIL (Malfunction Indicator Lamp) Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_SLP
0x30CB00 Sekundaerluftpumpe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_SLV
0x30CA00 Sekundarluftventil Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_SOK
0x30C200 Soundklappe Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_SR
0x30C400 Startrelais Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_TEV
0x30CF00 Tankentlueftungsventil Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_UGEN
0x303200 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_UVSG
0x301C00 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_VVT
0x30DD00 VVT Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENDE_VVTR
0x30DC00 VVT-Entlastungsrelais Ansteuerung beenden NO_CON keine Vorraussetzungen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_ENWS
0x30ED07 Vanos Einlass Ventil ansteuern CON_N_MIN nur bei erhoeter Motordrehzahl
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_ENWS_WERT | real | Sollwert Vanos_E Ventil CAM_SP_IN_EXT_ADJ |
| SW_TO_ENWS_WERT | unsigned long | Timeout Vanos_E Ventil 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV1
0x30E107 Einspritzventil 1 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV1_WERT | unsigned long | Periodendauer Einspritzventil 1 1BYTE in 0 bis 2550ms |
| SW_TV_EV1_WERT | real | Sollwert Einspritzventil 1 IV_EXT_ADJ[0] |
| SW_TO_EV1_WERT | unsigned long | Timeout Einspritzventil 1 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV2
0x30E207 Einspritzventil 2 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV2_WERT | unsigned long | Periodendauer Einspritzventil 2 1BYTE in 0 bis 2550ms |
| SW_TV_EV2_WERT | real | Sollwert Einspritzventil 2 IV_EXT_ADJ[4] |
| SW_TO_EV2_WERT | unsigned long | Timeout Einspritzventil 2 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV3
0x30E307 Einspritzventil 3 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV3_WERT | unsigned long | Periodendauer Einspritzventil 3 1BYTE in 0 bis 2550ms |
| SW_TV_EV3_WERT | real | Sollwert Einspritzventil 3 IV_EXT_ADJ[2] |
| SW_TO_EV3_WERT | unsigned long | Timeout Einspritzventil 3 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV4
0x30E407 Einspritzventil 4 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV4_WERT | unsigned long | Periodendauer Einspritzventil 4 1BYTE in 0 bis 2550ms |
| SW_TV_EV4_WERT | real | Sollwert Einspritzventil 4 IV_EXT_ADJ[5] |
| SW_TO_EV4_WERT | unsigned long | Timeout Einspritzventil 4 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV5
0x30E507 Einspritzventil 5 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV5_WERT | unsigned long | Periodendauer Einspritzventil 5 1BYTE in 0 bis 2550ms |
| SW_TV_EV5_WERT | real | Sollwert Einspritzventil 5 IV_EXT_ADJ[1] |
| SW_TO_EV5_WERT | unsigned long | Timeout Einspritzventil 5 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EV6
0x30E607 Einspritzventil 6 ansteuern CON_EV nur bei Motordrehzahl n=0 und EKP aus
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EV6_WERT | unsigned long | Periodendauer Einspritzventil 6 1BYTE in 0 bis 2550ms |
| SW_TV_EV6_WERT | real | Sollwert Einspritzventil 6 IV_EXT_ADJ[3] |
| SW_TO_EV6_WERT | unsigned long | Timeout Einspritzventil 6 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EWAP
0x30BF07 elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) ansteuern CON_EWAP nur bei Fahrzeuggeschwindigkeit v=0 und Motortemperatur TMOT kleiner 115gradCelsius und Batteriespannung UBAT groesser 10Volt
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_EWAP_WERT | real | Sollwert elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) N_REL_CWP_SP_EXT_ADJ |
| SW_TO_EWAP_WERT | unsigned long | Timeout elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_EWAP_SF
0x30BF07 Sonderfunktionen elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) ansteuern CON_EWAP nur bei Fahrzeuggeschwindigkeit v=0 und Motortemperatur TMOT kleiner 115gradCelsius und Batteriespannung UBAT groesser 10Volt
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PD_EWAP_WERT | unsigned long | Periodendauer elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) 1BYTE in 0 bis 2550ms |
| SW_TV_EWAP_SF_WERT | string | Sonderfunktionen elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) 1BYTE EWAP SF |
| SW_TO_EWAP_WERT | unsigned long | Timeout elektr. Wasserpumpe ueber BSD (Bit Serielle Datenschnittstelle) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_FGRL
0x30D507 Fahrgeschwindigkeitsregler-Lampe ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_FGRL_WERT | unsigned long | Sollwert Fahrgeschwindigkeitsregler-Lampe LV_ACT_CRU_EXT_ADJ |
| SW_TO_FGRL_WERT | unsigned long | Timeout Fahrgeschwindigkeitsregler-Lampe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_GLF
0x30C307 Gesteuerte Luftfuehrung ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_GLF_WERT | unsigned long | Sollwert Gesteuerte Luftfuehrung LV_ACT_ECRAS_EXT_ADJ |
| SW_TO_GLF_WERT | unsigned long | Timeout Gesteuerte Luftfuehrung 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_KFT
0x30C907 Kennfeldthermostat ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_KFT_WERT | real | Sollwert Kennfeldthermostat ECTPWM_EXT_ADJ |
| SW_TO_KFT_WERT | unsigned long | Timeout Kennfeldthermostat 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_KGEH
0x30AD07 Kurbelgehaeuseentlueftungsheizung ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_KGEH_WERT | unsigned long | Sollwert Kurbelgehaeuseentlueftungsheizung LV_VIM_2_EXT_ADJ |
| SW_TO_KGEH_WERT | unsigned long | Timeout Kurbelgehaeuseentlueftungsheizung 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_KOREL
0x30C707 Klimakompressor-Relais ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_KOREL_WERT | unsigned long | Sollwert Klimakompressor-Relais LV_ACT_ACCOUT_RLY_EXT_ADJ |
| SW_TO_KOREL_WERT | unsigned long | Timeout Klimakompressor-Relais 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_KRANN
0x31E3 Ansteuern Krann-Adaptionswerte (Anforderung aus CP5404)
Arguments
| Name | Type | Comment |
|---|---|---|
| NKW_WERT | long | Drehzahl NKW |
| RF_WERT | real | Relative Luftfuellung RF |
| TANS_WERT | real | Ansauglufttemperatur TANS |
| TMOT_WERT | real | Kuehlwassertemperatur TMOT |
| BA_IST_WERT | string | Istbetriebsart BA_IST |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_LRP
0x2E5FF707 Laufruhepruefung vorgeben NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_GEMISCHEINGRIFF_INAKTIV_WERT | unsigned long | Gemischeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_ZUENDWINKELEINGRIFF_INAKTIV_WERT | unsigned long | Zuendwinkeleingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_MINHUBEINGRIFF_INAKTIV_WERT | unsigned long | Minhubeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_HUBEINGRIFF_INAKTIV_WERT | unsigned long | zylinderselektiver Hubeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_LRP_BIT4_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT5_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT6_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT7_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_LSH1
0x30D007 Lambdasondenheizung vor Kat Bank1 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_LSH1_WERT | real | Tastverhaeltniss Lambdasondenheizung vor Kat Bank1 LSHPWM_UP_EXT_ADJ[1] |
| SW_TO_LSH1_WERT | unsigned long | Timeout Lambdasondenheizung vor Kat Bank1 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_LSH2
0x30D107 Lambdasondenheizung hinter Kat Bank1 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_LSH2_WERT | real | Tastverhaeltniss Lambdasondenheizung hinter Kat Bank1 LSHPWM_DOWN_EXT_ADJ[1] |
| SW_TO_LSH2_WERT | unsigned long | Timeout Lambdasondenheizung hinter Kat Bank1 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_LSH3
0x30D207 Lambdasondenheizung vor Kat Bank2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_LSH3_WERT | real | Tastverhaeltniss Lambdasondenheizung vor Kat Bank2 LSHPWM_UP_EXT_ADJ[2] |
| SW_TO_LSH3_WERT | unsigned long | Timeout Lambdasondenheizung vor Kat Bank2 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_LSH4
0x30D307 Lambdasondenheizung hinter Kat Bank2 ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_LSH4_WERT | real | Tastverhaeltniss Lambdasondenheizung hinter Kat Bank2 LSHPWM_DOWN_EXT_ADJ[2] |
| SW_TO_LSH4_WERT | unsigned long | Timeout Lambdasondenheizung hinter Kat Bank2 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_MIL
0x30D407 MIL (Malfunction Indicator Lamp) ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_MIL_WERT | unsigned long | Sollwert MIL (Malfunction Indicator Lamp) LV_ACT_MIL_EXT_ADJ |
| SW_TO_MIL_WERT | unsigned long | Timeout MIL (Malfunction Indicator Lamp) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_PROGRAMM_LRP
0x2E5FF708 Laufruhepruefung programmieren NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_GEMISCHEINGRIFF_INAKTIV_WERT | unsigned long | Gemischeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_ZUENDWINKELEINGRIFF_INAKTIV_WERT | unsigned long | Zuendwinkeleingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_MINHUBEINGRIFF_INAKTIV_WERT | unsigned long | Minhubeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_HUBEINGRIFF_INAKTIV_WERT | unsigned long | zylinderselektiver Hubeingriff (1= deaktivieren 0=aktivieren) 1BYTE IDENTICAL HEX |
| SW_LRP_BIT4_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT5_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT6_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
| SW_LRP_BIT7_WERT | unsigned long | not used 1BYTE IDENTICAL HEX |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_SLP
0x30CB07 Sekundaerluftpumpe ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_SLP_WERT | unsigned long | Sollwert Sekundaerluftpumpe LV_ACT_SAP_EXT_ADJ |
| SW_TO_SLP_WERT | unsigned long | Timeout Sekundaerluftpumpe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_SLV
0x30CA07 Sekundarluftventil ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_SLV_WERT | unsigned long | Sollwert Sekundarluftventil LV_ACT_SAV_EXT_ADJ |
| SW_TO_SLV_WERT | unsigned long | Timeout Sekundarluftventil 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_SOK
0x30C207 Soundklappe ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_SOK_WERT | unsigned long | Sollwert Soundklappe LV_ACT_SOF_EXT_ADJ |
| SW_TO_SOK_WERT | unsigned long | Timeout Soundklappe 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_SR
0x30C407 Startrelais ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_SR_WERT | unsigned long | Sollwert Startrelais LV_ACT_RLY_ST_EXT_ADJ |
| SW_TO_SR_WERT | unsigned long | Timeout Startrelais 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_TEV
0x30CF07 Tankentlueftungsventil ansteuern NO_CON keine Vorraussetzungen
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_TEV_WERT | real | TastverhaeltnissTankentlueftungsventil CPPWM_EXT_ADJ |
| SW_TO_TEV_WERT | unsigned long | Timeout Tankentlueftungsventil 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_UGEN
0x303207 Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) ansteuern N_LL nur bei Leerlauf-Drehzahl
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PHY_UGEN_WERT | real | Spannung Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) V_ALTER_SP_EXT_ADJ |
| SW_TO_UGEN_WERT | unsigned long | Timeout Generator Sollspannung BSD (Bit Serielle Datenschnittstelle) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_UVSG
0x301C07 Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) ansteuern V_N_EQ_ZERO nur bei Fahrzeuggeschwindigkeit v=0 und Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_UVSG_WERT | unsigned long | Sollwert Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) LV_RLY_MAIN_EXT_ADJ |
| SW_TO_UVSG_WERT | unsigned long | Timeout Kl.87 Spannung / Versorgung DME (Digitale Motor Elektronik) 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_VVT
0x30DD07 VVT ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_PHY_VVT_WERT | real | Stellbereich VVT ANG_SP_EXT_ADJ_VVL |
| SW_TO_VVT_WERT | unsigned long | Timeout VVT 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_VVTR
0x30DC07 VVT-Entlastungsrelais ansteuern N_EQ_ZERO nur bei Motordrehzahl n=0
Arguments
| Name | Type | Comment |
|---|---|---|
| SW_TV_VVTR_WERT | unsigned long | Sollwert VVT-Entlastungsrelais LV_RLY_VVL_EXT_ADJ |
| SW_TO_VVTR_WERT | unsigned long | Timeout VVT-Entlastungsrelais 1BYTE in 0 bis 510s |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_FASTA_EISYUGD
0x31E0 & 0x33E0 Ansteuern und Auslesen Eisy-Adaptionswerte (ungedrosselt)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_VSE_SPRI_0_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| STAT_VSE_SPRI_EINH | string | degree CRK |
| STAT_VSA_SPRI_0_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| STAT_VSA_SPRI_EINH | string | degree CRK |
| STAT_HUBEV_IST_0_WERT | real | Istwert Einlassventilhub HUBEV_IST |
| STAT_HUBEV_IST_EINH | string | mm |
| STAT_FS_EISYUGD_TEXT | string | Adaption Massenstromregler auf DK erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYUGD_WERT | int | |
| STAT_MRNN_TEST_VVT_0_WERT | real | Massenstromregler-Adaptionswert NN im UGD - Betrieb ueber Test gelesen MRNN_TEST_VVT |
| STAT_MRNN_TEST_VVT_EINH | string | - |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_FASTA_EISYGD
0x31E1 & 0x33E1 Ansteuern und Auslesen Eisy-Adaptionswerte (gedrosselt)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_VSE_SPRI_0_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| STAT_VSE_SPRI_EINH | string | degree CRK |
| STAT_VSA_SPRI_0_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| STAT_VSA_SPRI_EINH | string | degree CRK |
| STAT_WDK_IST_0_WERT | real | Aktueller Drosselklappenwinkel WDK_IST |
| STAT_WDK_IST_EINH | string | percent |
| STAT_FS_EISYGD_TEXT | string | Adaption Massenstromregler auf DK erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYGD_WERT | int | |
| STAT_MRNN_TEST_DK_0_WERT | real | Massenstromregler-Adaptionswert NN im GD - Betrieb ueber Test gelesen MRNN_TEST_DK |
| STAT_MRNN_TEST_DK_EINH | string | - |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_FASTA_KRANN
0x31E3 & 0x33E3 Ansteuern und Auslesen Krann-Adaptionswerte
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_RF_0_WERT | real | Relative Luftfuellung RF |
| STAT_RF_EINH | string | percent |
| STAT_TANS_0_WERT | real | Ansauglufttemperatur TANS |
| STAT_TANS_EINH | string | degree |
| STAT_TMOT_WERT | real | Kuehlwassertemperatur TMOT |
| STAT_TMOT_EINH | string | degree |
| STAT_BA_IST_WERT | string | Istbetriebsart BA_IST |
| STAT_BA_IST_EINH | string | - |
| STAT_KRNN_TEST_0_WERT | real | Zuendwinkelaenderung aus Adaption Klopfregelung fuer Testerabfrage KRNN_TEST |
| STAT_KRNN_TEST_EINH | string | degree |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_INPA_EISYUGD
0x31E0 & 0x33E0 Ansteuern und Auslesen Eisy-Adaptionswerte (ungedrosselt)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_VSE_SPRI_0_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| STAT_VSE_SPRI_EINH | string | degree CRK |
| STAT_VSA_SPRI_0_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| STAT_VSA_SPRI_EINH | string | degree CRK |
| STAT_HUBEV_IST_0_WERT | real | Istwert Einlassventilhub HUBEV_IST |
| STAT_HUBEV_IST_EINH | string | mm |
| STAT_FS_EISYUGD_TEXT | string | Adaption Massenstromregler auf DK erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYUGD_WERT | int | |
| STAT_MRNN_TEST_VVT_0_WERT | real | Massenstromregler-Adaptionswert NN im UGD - Betrieb ueber Test gelesen MRNN_TEST_VVT |
| STAT_MRNN_TEST_VVT_EINH | string | - |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_INPA_EISYGD
0x31E1 & 0x33E1 Ansteuern und Auslesen Eisy-Adaptionswerte (gedrosselt)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_VSE_SPRI_0_WERT | real | Istwert Einlassspreizung variable NWS VSE_SPRI |
| STAT_VSE_SPRI_EINH | string | degree CRK |
| STAT_VSA_SPRI_0_WERT | real | Istwert Auslassspreizung variable NWS VSA_SPRI |
| STAT_VSA_SPRI_EINH | string | degree CRK |
| STAT_WDK_IST_0_WERT | real | Aktueller Drosselklappenwinkel WDK_IST |
| STAT_WDK_IST_EINH | string | percent |
| STAT_FS_EISYGD_TEXT | string | Adaption Massenstromregler auf DK erstmalig erfolgt 1BYTE EISY-Adaption abgelaufen |
| STAT_FS_EISYGD_WERT | int | |
| STAT_MRNN_TEST_DK_0_WERT | real | Massenstromregler-Adaptionswert NN im GD - Betrieb ueber Test gelesen MRNN_TEST_DK |
| STAT_MRNN_TEST_DK_EINH | string | - |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_INPA_KRANN
0x31E3 & 0x33E3 Ansteuern und Auslesen Krann-Adaptionswerte
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_NKW_0_WERT | long | Drehzahl NKW |
| STAT_NKW_EINH | string | rpm |
| STAT_RF_0_WERT | real | Relative Luftfuellung RF |
| STAT_RF_EINH | string | percent |
| STAT_TANS_0_WERT | real | Ansauglufttemperatur TANS |
| STAT_TANS_EINH | string | degree |
| STAT_TMOT_WERT | real | Kuehlwassertemperatur TMOT |
| STAT_TMOT_EINH | string | degree |
| STAT_BA_IST_WERT | string | Istbetriebsart BA_IST |
| STAT_BA_IST_EINH | string | - |
| STAT_KRNN_TEST_0_WERT | real | Zuendwinkelaenderung aus Adaption Klopfregelung fuer Testerabfrage KRNN_TEST |
| STAT_KRNN_TEST_EINH | string | degree |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_FASTA_TECU
0x23 Auslesen der DME-Temperaturstatistik
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_PROGRAMMSTAND_TEXT | string | Programmstand |
| STAT_CTR_STC_TECU_1_TEXT | string | Adresse der Speicherzelle |
| STAT_CTR_STC_TECU_1_HEX | string | Inhalt der Speicherzelle als Hex-Wert |
| STAT_CTR_STC_TECU_1_WERT | unsigned long | Inhalt der Speicherzelle als unsigned long-Wert |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_MESSWERTBLOCK_LESEN
Lesen eines Messwertblockes Es muss immer das BlockSchreibenFlag und mindestens ein MESSWERT uebergeben werden. KWP2000: $2C DynamicallyDefinedLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier $04 ClearDynamicallyDefinedLocalIdentifier KWP2000: $2C DynamicallyDefinedLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier $02 DefineByCommonIdentifier KWP2000: $21 ReadDataByLocalIdentifier $F0 DynamicallyDefinedLocalIdentifier Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| MODE | string | Wenn 'JA' wird der Messwertblock im SG gelöscht neu ins SG geschrieben und dann gelesen Wenn 'NEIN' wird der Messwertblock im SG nicht gelöscht Es wird der im SG gespeicherte Messwertblock gelesen table MesswerteMode TEXT KOMMENTAR |
| MESSWERT | string | Dynamische Argumente Es können bis zu 42 Argumente übergeben werden Es muss mindestens ein Argument übergeben werden Er wird das zugehörige Result table MesswerteTab ARG RESULTNAME erzeugt |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_3 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_3 | binary | Hex-Antwort von SG |
_STATUS_OBD_MODE_01
Auslesen der Motor-Diagnosedaten nach Mode 01 PID 01
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_MIL_TEXT | string | Ansteuerstatus der MIL (An=1, Aus=0) |
| STAT_MIL_WERT | int | Ansteuerstatus der MIL (An=1, Aus=0) |
| STAT_ANZAHL_PCODE_WERT | int | Anzahl gespeicherter P-Codes |
| STAT_MONITOR_CC_TEXT | string | Überwachung Comprehensive Components (übrige Komponenten) Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_CC_WERT | int | Überwachung Comprehensive Components (übrige Komponenten) Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_CC_TEXT | string | Überwachung Comprehensive Components (übrige Komponenten) Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_CC_WERT | int | Überwachung Comprehensive Components (übrige Komponenten) Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_KSS_TEXT | string | Überwachung KraftStoffSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_KSS_WERT | int | Überwachung KraftStoffSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_KSS_TEXT | string | Überwachung KraftStoffSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_KSS_WERT | int | Überwachung KraftStoffSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_VA_TEXT | string | Überwachung VerbrennungsAussetzer Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_VA_WERT | int | Überwachung VerbrennungsAussetzer Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_VA_TEXT | string | Überwachung VerbrennungsAussetzer Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_VA_WERT | int | Überwachung VerbrennungsAussetzer Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_ARS_TEXT | string | Überwachung AbgasRückführungsSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_ARS_WERT | int | Überwachung AbgasRückführungsSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_ARS_TEXT | string | Überwachung AbgasRückführungsSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_ARS_WERT | int | Überwachung AbgasRückführungsSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_LSH_TEXT | string | Überwachung LambdaSondenHeizung Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_LSH_WERT | int | Überwachung LambdaSondenHeizung Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_LSH_TEXT | string | Überwachung LambdaSondenHeizung Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_LSH_WERT | int | Überwachung LambdaSondenHeizung Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_LS_TEXT | string | Überwachung LambdaSonde Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_LS_WERT | int | Überwachung LambdaSonde Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_LS_TEXT | string | Überwachung LambdaSonde Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_LS_WERT | int | Überwachung LambdaSonde Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_KLIMA_TEXT | string | Überwachung Klimaanlage Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_KLIMA_WERT | int | Überwachung Klimaanlage Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_KLIMA_TEXT | string | Überwachung Klimaanlage Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_KLIMA_WERT | int | Überwachung Klimaanlage Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_SLS_TEXT | string | Überwachung SekundärLuftSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_SLS_WERT | int | Überwachung SekundärLuftSystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_SLS_TEXT | string | Überwachung SekundärLuftSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_SLS_WERT | int | Überwachung SekundärLuftSystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_TEV_TEXT | string | Überwachung Tankentlüftungssystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_TEV_WERT | int | Überwachung Tankentlüftungssystem Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_TEV_TEXT | string | Überwachung Tankentlüftungssystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_TEV_WERT | int | Überwachung Tankentlüftungssystem Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_KH_TEXT | string | Überwachung KatalysatorHeizung Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_KH_WERT | int | Überwachung KatalysatorHeizung Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_KH_TEXT | string | Überwachung KatalysatorHeizung Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_KH_WERT | int | Überwachung KatalysatorHeizung Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_MONITOR_KAT_TEXT | string | Überwachung Katalysator Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_MONITOR_KAT_WERT | int | Überwachung Katalysator Test wird durch dieses Modul unterstützt=1, Test wird durch dieses Modul nicht unterstützt=0 |
| STAT_READINESS_KAT_TEXT | string | Überwachung Katalysator Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| STAT_READINESS_KAT_WERT | int | Überwachung Katalysator Test nicht abgeschlossen=1, Test abgeschlossen oder nicht anwendbar=0 |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_OBD_MODE_03
Auslesen der P-Codes nach Mode 3
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_PCODE_1_HEX | string | 1. P-Code als Hex-Wert |
| STAT_PCODE_1_TEXT | string | 1. P-Code als Text |
| STAT_PCODE_M3_ANZAHL | int | Anzahl gespeicherter P-Codes |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
_STATUS_OBD_MODE_07
Auslesen der P-Codes nach Mode 7
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_PCODE_1_HEX | string | 1. P-Code als Hex-Wert |
| STAT_PCODE_1_TEXT | string | 1. P-Code als Text |
| STAT_PCODE_M7_ANZAHL | int | Anzahl gespeicherter P-Codes (0 - 6) |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FS_LESEN_DETAIL
Fehlerspeicher lesen (ein Fehler / alle Details) KWP2000: $17 ReadStatusOfDiagnosticTroubleCodes Modus: Default
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | int | gewaehlter Fehlercode |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| F_VERSION | int | Typ des Fehlerspeichers Fuer KWP-2000 immer 2 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_SYMPTOM_NR | int | Fehlersymptom (Standard-Fehlerart) als Zahl |
| F_SYMPTOM_TEXT | string | Fehlersymptom (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_PCODE | unsigned int | optional / Pflicht fuer abgasrelevante SG Wertebereich 0x0000 - 0xFFFF 0x0000: wenn nicht belegt |
| F_PCODE_STRING | string | 5 stelliger Text in der Form 'Pxxxx' '--': wenn nicht belegt '??': wenn nicht bekannt |
| F_PCODE_TEXT | string | Fehler als Klartext '': wenn nicht belegt table PCodeTexte TEXT |
| F_PCODE7 | unsigned int | optional / fuer abgasrelevante SG Wertebereich 0x0000 - 0xFFFF 0x0000: wenn nicht belegt |
| F_PCODE7_STRING | string | 5 stelliger Text in der Form 'Pxxxx' '--': wenn nicht belegt '??': wenn nicht bekannt |
| F_PCODE7_TEXT | string | Fehler als Klartext '': wenn nicht belegt table PCodeTexte TEXT |
| F_HFK | int | Haufigkeitszaehler als Zahl Wertebereich 0 - 255 -1: ohne Haufigkeitszaehler |
| F_LZ | int | Logistikzaehler als Zahl Wertebereich 0 - 255 -1: ohne Logistikzaehler |
| F_ART_ANZ | int | Anzahl der zusaetzlichen Fehlerarten Je nach dieser Anzahl i (i = 1, 2, ...) existieren i mal folgende Results: (long) F_ARTi_NR Index der i. Fehlerart (string) F_ARTi_TEXT Text zur i. Fehlerart |
| F_UW_KM | long | Umweltbedingung Kilometerstand Wertebereich: 0 - 524280 km |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen Je nach dieser Anzahl i (i = 1, 2, ...) existieren i mal folgende Results: (long) F_UWi_NR Index der i. Umweltbedingung (string) F_UWi_TEXT Text zur i. Umweltbedingung (real) F_Uwi_WERT Wert der i. Umweltbedingung (string) F_UWi_EINH Einheit der i. Umweltbedingung |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SET_BAUDRATE
Initialisierung der Kommunikationsparameter mit bestimmter Baudrate
Arguments
| Name | Type | Comment |
|---|---|---|
| BAUDRATE | string | die gewuenschte Baudrate |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
SET_PARAMETER
Aenderung der Kommunikationsparameter bei Long-Parametersätzen
Arguments
| Name | Type | Comment |
|---|---|---|
| KONZEPT | string | Konzept |
| BAUDRATE | string | Baudrate |
| TIMEOUT | string | Timeout in ms |
| REGENERATIONSZEIT | string | Regenerationszeit in ms |
| TELEGRAMMENDEZEIT | string | Telegrammendezeit in ms |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
INTERFACETYPE
Interface-Typ bestimmen und ausgeben Es wird der Name des Interfaces übergeben Wichtig für Baudratenumschaltung weil bei ADS, EADS und OBD sind nur 115200 Baud möglich, bei EDIC nur 125000 Baud möglich
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| INTERFACE_TYP | string | Rueckmeldung des Interface-Typs |
ACCESS_TIMING_PARAMETER
Aenderung der Timingparameter im SG
Arguments
| Name | Type | Comment |
|---|---|---|
| P2MIN | int | P2min, Einheit: 0.5 ms |
| P2MAX | int | P2max, Einheit: 25 ms |
| P3MIN | int | P3min, Einheit: 0.5 ms |
| P3MAX | int | P3max, Einheit: 250 ms |
| P4MIN | int | P4min, Einheit: 0.5 ms |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ACCESS_TIMING_PARAMETER_DEFAULT
Default-Timingparameter im SG
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FS_LESEN_HEX
Fehlerspeicher auslesen als Hex Dump
Arguments
| Name | Type | Comment |
|---|---|---|
| FEHLERNR | int | Eingabe der FehlerNummer |
Results
| Name | Type | Comment |
|---|---|---|
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| F_ORT_NR | long | Nummer des Fehlers soll FEHLERNR sein |
| F_NR_INT | int | Anzahl der eingetragenen Fehler |
| F_ORT_TEXT | string | Fehlernummer im Speicher |
| FS_ZEILE1 | string | Byte 0 - 8 des Fehlerspeichers als Dump |
| FS_ZEILE2 | string | Byte 9 - 16 des Fehlerspeichers als Dump |
| FS_ZEILE3 | string | Byte 17 - 24 des Fehlerspeichers als Dump |
| FS_ZEILE4 | string | Byte 25 - 28 des Fehlerspeichers als Dump |
MESSWERTBLOCK_LESEN
$2C F0 02 DDLI Messwerte aus Übergabestring definieren
Arguments
| Name | Type | Comment |
|---|---|---|
| STRING_IN | string | Werte aus DDLI Liste Format 0x58XX,0x42YY,0x43ZZ,... |
| TRENNZEICHEN | string | Werte aus DDLI Liste Format 0x58XX,0x42YY,0x43ZZ,... |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG Block löschen |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block lesen |
| _TEL_ANTWORT | binary | Hex-Antwort von SG Block lesen |
| STAT_ANZAHL_WERTE | int | Anzahl Messwerte 0 bis n dezimal ansteigend |
| STAT_MESSWERT0_WERT | real | real Wert |
| STAT_MESSWERT0_STRING | string | String mit 9 signifikanten Stellen |
| STAT_MESSWERT0_TEXT | string | Text der Variablen aus KOMMENTAR |
| STAT_MESSWERT0_EINH | string | Einheit der Variablen |
STATUS_MESSWERTE_VANOS
$2C F0 02 DDLI Messwerte CAM_IN und CAM_EX auf Wunsch von VS-22
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_EINLASS_WERT | real | VANOS Einlass Istwert 60 bis 155,6 |
| STAT_EINLASS_TEXT | string | |
| STAT_EINLASS_EINH | string | °KW |
| STAT_EINLASS_SOLL_WERT | real | VANOS Einlass Sollwert 60 bis 155,6 |
| STAT_EINLASS_SOLL_TEXT | string | |
| STAT_EINLASS_SOLL_EINH | string | °KW |
| STAT_AUSLASS_WERT | real | VANOS Auslass Istwert -135,6 bis -40 |
| STAT_AUSLASS_TEXT | string | |
| STAT_AUSLASS_EINH | string | °KW |
| STAT_AUSLASS_SOLL_WERT | real | VANOS Auslass Sollwert -135,6 bis -40 |
| STAT_AUSLASS_SOLL_TEXT | string | |
| STAT_AUSLASS_SOLL_EINH | string | °KW |
| STAT_ANZAHL_WERTE | int |
FS_LESEN_FREEZE_FRAME
Fehlerspeicher auslesen mit SAE Werten Umwelt und P-Code
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | int | die Nummer des zu lesenden Fehlers eingeben |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei, Tabelle JobResult STATUS_TEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG | binary | Hex-Anforderung an SG |
| F_ART_ANZ | int | Anzahl der eingetragenen Fehler |
| F_ORT_NR | long | Fehlercode des SG als Index == F_CODE |
| F_ORT_TEXT | string | Fehlercode des SG als Text |
| F_SYMPTOM_NR | int | Gibt die Nummer der Fehlerart aus(StatusOfDTC) |
| F_SYMPTOM_TEXT | string | Interpretiert die Fehlerart |
| F_READY_NR | int | Gibt an, ob Readiness gesetzt |
| F_READY_TEXT | string | gibt einen Text zur Readiness aus |
| F_VORHANDEN_NR | int | Gibt die Nummer des Eintragstatuses aus |
| F_VORHANDEN_TEXT | string | gibt die Eintragsentprellung des Fehlers an |
| F_WARNUNG_NR | int | Gibt die Nummer fuer MIL EIN aus |
| F_WARNUNG_TEXT | string | gibt an, ob die MIL angesteuert wird |
| F_ZYKLUS_FLAG | string | gibt an, ob Zyklus-Flag gesetzt wurden ist |
| F_AKTIV_FLAG | string | gibt an, ob Diagnose laeuft |
| F_STOP_FLAG | string | gibt an, ob Stopbedingungen vorliegen |
| F_ERROR_FLAG | string | zeigt Error-Flag an |
| F_MIL_FLAG | string | zeigt den MIL-Status an |
| F_ENTPRELL_FLAG | string | gibt den MIL-Entprellstatus an |
| F_HFK | int | Haeufigkeit des einzelnen Fehlers |
| F_PCODE | int | P-Code Zahl entsprechend FO und FA |
| F_PCODE_STRING | string | P-Code Zahl als P0123 entsprechend FO und FA |
| F_PCODE_TEXT | string | P-Code Text entsprechend FO und FA |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen des einzelnen Fehlers |
| F_UW_KM | string | Km-Stand bei Erst-, Zweit- Letzmaligen Auftreten |
| F_UW1_NR | int | 1.Satz Umweltbedingung 1 Index (Ersterkennung) |
| F_UW1_TEXT | string | 1.Satz UW1 Text zur Umweltbedingung |
| F_UW1_EINH | string | 1.Satz UW1 Einheit |
| F_UW2_NR | int | 1.Satz Umweltbedingung 2 Index (Ersterkennung) |
| F_UW2_TEXT | string | 1.Satz UW2 Text zur Umweltbedingung |
| F_UW2_EINH | string | 1.Satz UW2 Einheit |
| F_UW3_NR | int | 1.Satz Umweltbedingung 3 Index (Ersterkennung) |
| F_UW3_TEXT | string | 1.Satz UW3 Text zur Umweltbedingung |
| F_UW3_EINH | string | 1.Satz UW3 Einheit |
| F_UW4_NR | int | 1.Satz Umweltbedingung 4 Index (Ersterkennung) |
| F_UW4_TEXT | string | 1.Satz UW4 Text zur Umweltbedingung |
| F_UW4_EINH | string | 1.Satz UW4 Einheit |
| F_HLC | int | Entprellvorgaenge Fahrzyklen HLC |
| F_CLA | string | Klasse |
| F_FLC | int | Entprellzähler ( MIL an) FLC |
| F_DLC | int | Entprellvorgaenge DLC |
| F_LZ | int | Zähler Aufwärmzyklen DLC |
| F_FF0_TEXT | string | Freeze Frame Umweltbedingung 0 Text |
| F_FF0_WERT | string | Freeze Frame Umweltbedingung 0 Status Lambda Bank1 |
| F_FF1_TEXT | string | Freeze Frame Umweltbedingung 1 Text |
| F_FF1_WERT | string | Freeze Frame Umweltbedingung 1 Status Lambda Bank2 |
| F_FF2_TEXT | string | Freeze Frame Umweltbedingung 2 Text |
| F_FF2_EINH | string | Freeze Frame Umweltbedingung 2 Einheit |
| F_FF2_WERT | real | Freeze Frame Umweltbedingung 2 Lastfaktor |
| F_FF3_TEXT | string | Freeze Frame Umweltbedingung 3 Text |
| F_FF3_EINH | string | Freeze Frame Umweltbedingung 3 EINH |
| F_FF3_WERT | real | Freeze Frame Umweltbedingung 3 KuehlerTemperatur |
| F_FF4_TEXT | string | Freeze Frame Umweltbedingung 4 Text |
| F_FF4_EINH | string | Freeze Frame Umweltbedingung 4 EINH |
| F_FF4_WERT | real | Freeze Frame Umweltbedingung 4 Control Bank1 |
| F_FF5_TEXT | string | Freeze Frame Umweltbedingung 5 Text |
| F_FF5_EINH | string | Freeze Frame Umweltbedingung 5 EINH |
| F_FF5_WERT | real | Freeze Frame Umweltbedingung 5 Aadaption Bank1 |
| F_FF6_TEXT | string | Freeze Frame Umweltbedingung 6 Text |
| F_FF6_EINH | string | Freeze Frame Umweltbedingung 6 EINH |
| F_FF6_WERT | real | Freeze Frame Umweltbedingung 6 Control Bank2 |
| F_FF7_TEXT | string | Freeze Frame Umweltbedingung 7 Text |
| F_FF7_EINH | string | Freeze Frame Umweltbedingung 7 EINH |
| F_FF7_WERT | real | Freeze Frame Umweltbedingung 7 Adaption Bank2 |
| F_FF8_TEXT | string | Freeze Frame Umweltbedingung 8 Text |
| F_FF8_EINH | string | Freeze Frame Umweltbedingung 8 EINH |
| F_FF8_WERT | real | Freeze Frame Umweltbedingung 8 Ansaugdruck |
| F_FF9_TEXT | string | Freeze Frame Umweltbedingung 9 Text |
| F_FF9_EINH | string | Freeze Frame Umweltbedingung 9 EINH |
| F_FF9_WERT | real | Freeze Frame Umweltbedingung 9 Drehzahl |
| F_FF10_TEXT | string | Freeze Frame Umweltbedingung 10 Text |
| F_FF10_EINH | string | Freeze Frame Umweltbedingung 10 EINH |
| F_FF10_WERT | real | Freeze Frame Umweltbedingung 10 Fahrzeug Geschwindigkeit |
STATUS_MESSWERTE_KD
$2C F0 02 DDLI Messwerte nach Wunsch VS-22
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ANZAHL_WERTE | int | Anzahl Messwerte 0 bis 16 |
| STAT_MESSWERT0_WERT | real | Messwert (Word) |
| STAT_MESSWERT0_STRING | string | Messwert (Word) |
| STAT_MESSWERT0_TEXT | string | Messwert |
| STAT_MESSWERT0_EINH | string | Messwert |
| STAT_MESSWERT1_WERT | real | Messwert (Word) |
| STAT_MESSWERT1_STRING | string | Messwert (Word) |
| STAT_MESSWERT1_TEXT | string | Messwert |
| STAT_MESSWERT1_EINH | string | Messwert |
| STAT_MESSWERT2_WERT | real | Messwert (Word) |
| STAT_MESSWERT2_STRING | string | Messwert (Word) |
| STAT_MESSWERT2_TEXT | string | Messwert |
| STAT_MESSWERT2_EINH | string | Messwert |
| STAT_MESSWERT3_WERT | real | Messwert (Word) |
| STAT_MESSWERT3_STRING | string | Messwert (Word) |
| STAT_MESSWERT3_TEXT | string | Messwert |
| STAT_MESSWERT3_EINH | string | Messwert |
| STAT_MESSWERT4_WERT | real | Messwert (Word) |
| STAT_MESSWERT4_STRING | string | Messwert (Word) |
| STAT_MESSWERT4_TEXT | string | Messwert |
| STAT_MESSWERT4_EINH | string | Messwert |
| STAT_MESSWERT5_WERT | real | Messwert (Word) |
| STAT_MESSWERT5_STRING | string | Messwert (Word) |
| STAT_MESSWERT5_TEXT | string | Messwert |
| STAT_MESSWERT5_EINH | string | Messwert |
| STAT_MESSWERT6_WERT | real | Messwert (Word) |
| STAT_MESSWERT6_STRING | string | Messwert (Word) |
| STAT_MESSWERT6_TEXT | string | Messwert |
| STAT_MESSWERT6_EINH | string | Messwert |
| STAT_MESSWERT7_WERT | real | Messwert (Word) |
| STAT_MESSWERT7_STRING | string | Messwert (Word) |
| STAT_MESSWERT7_TEXT | string | Messwert |
| STAT_MESSWERT7_EINH | string | Messwert |
| STAT_MESSWERT8_WERT | real | Messwert (Word) |
| STAT_MESSWERT8_STRING | string | Messwert (Word) |
| STAT_MESSWERT8_TEXT | string | Messwert |
| STAT_MESSWERT8_EINH | string | Messwert |
| STAT_MESSWERT9_WERT | real | Messwert (Word) |
| STAT_MESSWERT9_STRING | string | Messwert (Word) |
| STAT_MESSWERT9_TEXT | string | Messwert |
| STAT_MESSWERT9_EINH | string | Messwert |
| STAT_MESSWERT10_WERT | real | Messwert (Word) |
| STAT_MESSWERT10_STRING | string | Messwert (Word) |
| STAT_MESSWERT10_TEXT | string | Messwert |
| STAT_MESSWERT10_EINH | string | Messwert |
| STAT_MESSWERT11_WERT | real | Messwert (Word) |
| STAT_MESSWERT11_STRING | string | Messwert (Word) |
| STAT_MESSWERT11_TEXT | string | Messwert |
| STAT_MESSWERT11_EINH | string | Messwert |
| STAT_MESSWERT12_WERT | real | Messwert (Word) |
| STAT_MESSWERT12_STRING | string | Messwert (Word) |
| STAT_MESSWERT12_TEXT | string | Messwert |
| STAT_MESSWERT12_EINH | string | Messwert |
| STAT_MESSWERT13_WERT | real | Messwert (Word) |
| STAT_MESSWERT13_STRING | string | Messwert (Word) |
| STAT_MESSWERT13_TEXT | string | Messwert |
| STAT_MESSWERT13_EINH | string | Messwert |
| STAT_MESSWERT14_WERT | int | Messwert (Word) |
| STAT_MESSWERT14_STRING | string | Messwert (Word) |
| STAT_MESSWERT14_TEXT | string | Messwert |
| STAT_MESSWERT14_EINH | string | Messwert |
| STAT_MESSWERT15_WERT | real | Messwert (Word) |
| STAT_MESSWERT15_STRING | string | Messwert (Word) |
| STAT_MESSWERT15_TEXT | string | Messwert |
| STAT_MESSWERT15_EINH | string | Messwert |
IDENT_AIF
Identdaten mit KWP2000: $1A ReadECUIdentification Anwender Informations Felder mit KWP 2000: $23 ReadMemoryByAddress
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ID_BMW_NR | string | BMW-Teilenummer |
| ID_HW_NR | string | BMW-Hardwarenummer |
| ID_COD_INDEX | int | Codier-Index |
| ID_DIAG_INDEX | int | Diagnose-Index |
| ID_VAR_INDEX | int | Varianten-Index |
| ID_DATUM_JAHR | int | Herstelldatum (Jahr) |
| ID_DATUM_MONAT | int | Herstelldatum (Monat) |
| ID_DATUM_TAG | int | Herstelldatum (Tag) |
| ID_DATUM | string | Herstelldatum (TT.MM.JJJJ) |
| ID_LIEF_NR | int | Lieferanten-Nummer |
| ID_LIEF_TEXT | string | Lieferanten-Text nach Tabelle Lieferanten |
| ID_SW_NR_MCV | string | Softwarenummer (message catalogue version) |
| ID_SW_NR_FSV | string | Softwarenummer (functional software version) |
| ID_SW_NR_OSV | string | Softwarenummer (operating system version) |
| ID_SW_NR_RES | string | Softwarenummer (reserved - currently unused) |
| AIF_ADRESSE | long | AIF Adresse |
| AIF_FAHRGESTELL_NR | string | Fahrgestellnummer 7-stellig |
| AIF_PROGRAMMIER_DATUM | string | Datum der SG-Programmierung in der Form JJJJ.MM.TT |
| AIF_ZUSAMMENBAU_NR | string | BMW/Rover Zusammenbaunummer |
| AIF_DATENSATZ_NR | string | BMW/Rover Datensatznummer - Softwarenummer |
| AIF_BEHOERDEN_NR | string | BMW/Rover Behoerdennummer |
| AIF_HAENDLER_NR | string | Haendlernummer |
| AIF_TESTER_NR | string | Tester Seriennummer |
| AIF_KM_STAND | long | km-Stand bei der Programmierung |
| AIF_PROGRAMM_STAND | string | Programmstandsnummer |
| AIF_ANZ_FREI | int | Anzahl noch vorhandener AIF-Eintraege |
| AIF_ANZ_DATEN | int | Groesse des AIF-Eintrags |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
STATUS_OBD
$21 05 Monitoring Funktionen und Status Bits
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MISSFIRE_MONITOR | int | Statusbit Fehlzuendungen werden ueberwacht 1=Nein / 0=Ja |
| STAT_MISSFIRE | int | Fehlzuendungen Ueberwachung 0=Bereit / 1=Start |
| STAT_FUELSYSTEM_MONITOR | int | Kraftstoffsystem Diagnose vorhanden 1=Nein / 0=Ja |
| STAT_FUELSYSTEM | int | Kraftstoffsystem Diagnose 0=Bereit / 1=Start |
| STAT_COMPREHENSIVE_MONITOR | int | Umfassende Komponentenueberwachung vorhanden 1=Nein / 0=Ja |
| STAT_COMPREHENSIVE | int | Umfassende KomponentenUeberwachung 0=Bereit / 1=Start |
| STAT_KAT_UEBERWACHUNG_MONITOR | int | Katalysator Diagnose 0=Ein / 1=Aus |
| STAT_KAT_UEBERWACHUNG | int | Katalysator Ueberwachung 0=Bereit / 1=Start |
| STAT_KAT_HEIZUNG_MONITOR | int | Katheizung Diagnose 0=Ein / 1=Aus |
| STAT_KAT_HEIZUNG | int | Umfassende Katheizung Ueberwachung 0=Bereit / 1=Start |
| STAT_EVAPORATE_MONITOR | int | TankentlueftungsSystem Diagnose 0=Ein / 1=Aus |
| STAT_EVAPORATE | int | TankentlueftungsSystemUeberwachung 0=Bereit / 1=Start |
| STAT_SEC_AIR_MONITOR | int | Sekundaerluft Diagnose 0=Ein / 1=Aus |
| STAT_SEC_AIR | int | SekundaerluftSystemUeberwachung 0=Bereit / 1=Start |
| STAT_AC_SYSTEM_MONITOR | int | KlimaSystem Diagnose 0=Ein / 1=Aus |
| STAT_AC_SYSTEM | int | KlimaSystemUeberwachung 0=Bereit / 1=Start |
| STAT_LAMBDA_MONITOR | int | LambdaSonden Diagnose 0=Ein / 1=Aus |
| STAT_LAMBDA | int | LambdaSondenUeberwachung 0=Bereit / 1=Start |
| STAT_LAMBDA_HEATER_MONITOR | int | LambdasondenHeizungs Diagnose 0=Ein / 1=Aus |
| STAT_LAMBDA_HEATER | int | LambdasondenHeizungsUeberwachung 0=Bereit / 1=Start |
| STAT_EGR_MONITOR | int | AbgasRueckfuehrungsDiagnose 0=Ein / 1=Aus |
| STAT_EGR | int | AbgasRueckfuehrungsSystemUeberwachung 0=Bereit / 1=Start |
STATUS_READINESS
$21 05 Monitoring Funktionen und Status Bits
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_KATRDY_EIN | int | Katalysator Readiness gesetzt 0=Nein / 1=Ja |
| STAT_HKATRDY_EIN | int | Umfassende Katheizung Readiness gesetzt 0=Nein / 1=Ja |
| STAT_TESRDY_EIN | int | Tankentlueftung Readiness gesetzt 0=Nein / 1=Ja |
| STAT_SLSRDY_EIN | int | Sekundaerluft Readiness gesetzt 0=Nein / 1=Ja |
| STAT_KLIMARDY_EIN | int | KlimaSystem Readiness gesetzt 0=Nein / 1=Ja |
| STAT_LSRDY_EIN | int | LambdaSonden Readiness gesetzt 0=Nein / 1=Ja |
| STAT_HSRDY_EIN | int | LambdasondenHeizung Readiness gesetzt 0=Nein / 1=Ja |
| STAT_AGRRDY_EIN | int | AbgasRueckfuehrung Readiness gesetzt 0=Nein / 1=Ja |
EWS_EMPFANG
EWS-Empfangsstatus auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| EWS_EMPFANGSSTATUS | string | Rueckgabestatus bei der Startwertinitialisierung |
| EWS_STATUS_VALUE | int | Rueckgabestatus bei der Startwertinitialisierung |
STATUS_FGR
$21 07 MFL MultiFunktionsLekrad STATE_MSW_CAN
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MSW_CAN | string | Status STATE_MSW_CAN 0 bis 6 |
| STAT_PLUS | int | Status 01 + 0=Nein / 1=Ja |
| STAT_MINUS | int | Status 02 - 0=Nein / 1=Ja |
| STAT_SET | int | Status 03 Set 0=Nein / 1=Ja |
| STAT_OFF | int | Status 04 I/O 0=Nein / 1=Ja |
DISTANCE_MIL_ON
Auslesen Fahrstrecke mit MIL-eingeschaltet KWP 2000* $21 09 DIST_ACT_MIL ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DISTANZ_MIL_WERT | real | Fahrstrecke mit MIL an 0 - 214.748.364,7 km Auflösung 0,1 km |
| STAT_DISTANZ_MIL_EINH | string | Einheit km |
STATUS_SYSTEMCHECK_SEK_LUFT
Stand der Diagnose KWP 2000* $21 20 Status Systemtest SLS SekundärLuftSystem
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_SYSTEMCHECK_SEK_LUFT_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_TEXT | string | Text Diagnose Ablauf 0=läuft 1=Start verhindert 5=stop 8=Ende ohne Fehler |
STATUS_SYSTEMCHECK_TEV_FUNC
Status und Messströme KWP 2000* $21 22 RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | 0=Init ... |
| STAT_SYSTEMCHECK_TEV_FUNC_WERT | int | 0=Init ... |
| STAT_DIAGNOSE_TEXT | string | 0=Init ... |
STATUS_SYSTEMCHECK_TEV
Stand der Diagnose KWP 2000* $21 22 TEV ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_TEXT | string | Text Diagnose Ablauf 0=aktiv ... |
STATUS_SYSTEMCHECK_EVAUSBL
welches EV-Ventil ist abgeschaltet KWP 2000* $21 25 RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | 0=Init ... |
| STAT_DIAGNOSE_TEXT | string | 0=Init ... |
STATUS_SYSTEMCHECK_VVT_ANSCHLAG
Stand der Diagnose KWP 2000* $21 27 VVT ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_VVT_ANSCHL_WERT | int | Status des Lernens Bank1 0 bis 9 |
| STAT_VVT_ANSCHL_TEXT | string | Status des Lernens Bank1 als Text |
STATUS_DIGITAL_3
Statusbit KOmpressorRELais KWP 2000* $21 36 LV_ACCOUT_RLY ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_KO_EIN | int | Relais angezogen 0=nein 1=ja |
STATUS_DIGITAL_4
Statusbit LeerLauf KWP 2000* $21 3F LV_IS ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_LL_EIN | int | LeerLauf aktiv 0=nein 1=ja |
STATUS_L_SONDE_HEIZUNG_H_2
Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 41 STATE_LSH_DOWN_2 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_L_SONDE_HEIZUNG_WERT | int | Status Wert 0=aus bis 5 Überspannungsschutz |
| STAT_L_SONDE_HEIZUNG_EINH | string | Einheit ohne |
| STAT_L_SONDE_HEIZUNG_TEXT | string | Text Regelzustand L-Sonde Heizung |
STATUS_L_SONDE_HEIZUNG_H_1
Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 42 STATE_LSH_DOWN_1 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_L_SONDE_HEIZUNG_WERT | int | Status Wert 0=aus bis 5 Überspannungsschutz |
| STAT_L_SONDE_HEIZUNG_EINH | string | Einheit ohne |
| STAT_L_SONDE_HEIZUNG_TEXT | string | Text Regelzustand L-Sonde Heizung |
STATUS_L_SONDE_HEIZUNG_V_2
Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 43 STATE_LSH_UP_2 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_L_SONDE_HEIZUNG_WERT | int | Status Wert 0=aus bis 6 Temperaturschutz |
| STAT_L_SONDE_HEIZUNG_EINH | string | Einheit ohne |
| STAT_L_SONDE_HEIZUNG_TEXT | string | Text Regelzustand L-Sonde Heizung |
STATUS_L_SONDE_HEIZUNG_V_1
Auslesen des Reglerzustands der Sondenheizung KWP 2000* $21 44 STATE_LSH_UP_1 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_L_SONDE_HEIZUNG_WERT | int | Status Wert 0=aus bis 6 Temperaturschutz |
| STAT_L_SONDE_HEIZUNG_EINH | string | Einheit ohne |
| STAT_L_SONDE_HEIZUNG_TEXT | string | Text Regelzustand L-Sonde Heizung |
STATUS_EWS_LOCK
Statusbit LV_LOCK_IMOB = 1 blockt Zündung und Einspritzung KWP 2000* $21 49 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_EWS_LOCK_WERT | int | EWS/CAS blockiert Zündung/Einspritzung 0=nein 1=ja |
STATUS_ZEIT_EINSPRITZ
Auslesen der Einspritzzeit Zyl. 1 KWP 2000* $21 4C BIOS_TI_0
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ZEIT_WERT | real | Wert von V_PVS_1 |
| STAT_ZEIT_EINH | string | Einheit in ms |
STATUS_ZUENDWINKEL
Auslesen des Zündwinkels Zylinder 1 KWP 2000* $21 56 IGA_IGC_0 ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ZUENDWINKEL_WERT | real | Wert von Zuendwinkel Zylinder 1 |
| STAT_ZUENDWINKEL_EINH | string | Einheit °KW |
STATUS_DROSSELKLAPPE
Auslesen des Drosselklappen Winkels KWP 2000* $21 57 TPS_AV ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DROSSELKLAPPE_WERT | real | Wert von TPS_AV |
| STAT_DROSSELKLAPPE_EINH | string | Einheit von TPS_AV |
STATUS_KLOPFEN
Auslesen des Status Klopfen erkannt 0/1 KWP 2000* $21 71 LV_KNK ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_KLOPFEN_WERT | int | Wert von Zuendwinkel Zylinder 1 |
| STAT_KLOPFEN_EINH | string | Einheit °KW |
STATUS_KVA
Auslesen Faktor KVA KWP 2000* $21 C1 kva-faktor ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_KVA_WERT | real | Wert von vsa_adp |
| STAT_KVA_EINH | string | Einheit von vsa_adp |
STATUS_BETRIEBSSTUNDENZAEHLER
$ 21 C3 Status Betriebsstundenzaehler auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_BSZ_WERT | int | Status Betriebsstundenzaehler lesen 0 = <10h, 1= >= 10h, 2 = unbekannt |
| STAT_BSZ_TEXT | string | Status Betriebsstundenzaehler |
| STAT_TRT_WERT | real | Status Betriebsstundenzaehler lesen Variable TotalRunningTime |
| STAT_TRT_EINH | string | 1/10 s |
STATUS_SYSTEMCHECK_DMTL
Stand der Diagnose KWP 2000* $21 DA DMTL ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_SYSTEMCHECK_DMTL_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_TEXT | string | Text Diagnose Ablauf 0=aktiv ... |
STATUS_SYSTEMCHECK_L_SONDE
Stand der Diagnose KWP 2000* $21 DF vertauschte L-Sonden ReadDataByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_SYSTEMCHECK_L_SONDE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_TEXT | string | Text Diagnose Ablauf 1=läuft 3=Werte gültig 6=Start verhindert 7=nicht gestartet |
HS_LESEN
Historyspeicher lesen (alle History-Meldungen / Ort und Art) KWP2000: $22 ReadDataByCommonIdentifier $2100 HistoryMemory
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text |
| F_SYMPTOM_NR | int | Fehlersymptom (Standard-Fehlerart) als Zahl |
| F_SYMPTOM_TEXT | string | Fehlersymptom (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_HFK | int | Haufigkeitszaehler als Zahl Wertebereich 0 - 255 |
| F_HSKM1 | string | km - Stand beim ersten Auftreten |
| F_HSKM2 | string | km - Stand beim zweiten Auftreten |
| F_HSKM3 | string | km - Stand beim letzten Auftreten |
| F_CLA | string | Fehlerklasse als hex Wert |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_LEISTUNGSSTUFE
Auslesen der Codierung Obere/Untere Leistungsstufe KWP2000: $22 ReadDataByCommonIdentifier $3020 RecordCommonIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_LEISTUNGSSTUFE_WERT | int | Codierung für Leistungsstufe als Integer (0 = UL, 1 = ML, 2 = OL) |
| STAT_LEISTUNGSSTUFE_TEXT | string | Codierung für Leistungsstufe als Text |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_MOTORDREHZAHL
Auslesen der Motordrehzahl und LL-Sollwert KWP 2000* $22 40 00 Auszug
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MOTORDREHZAHL_WERT | real | Wert von Motordrehzahl |
| STAT_SOLL_MOTORDREHZAHL_WERT | real | Wert von LeerLaufSollDrehzahl |
| STAT_MOTORDREHZAHL_EINH | string | Einheit von Motordrehzahl |
STATUS_DFMONITOR
Generator Belastung KWP2000: $22 40 01 ReadDataByCommonIdentifier dfmonitor
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| STAT_AUSGANG_WERT | real | DF-Monitor Wert 0 - 100% |
| STAT_AUSGANG_EINH | string | DF-Monitor Einheit % |
| STAT_AUSGANG_TEXT | string | DF-Monitor Text |
STATUS_DIGITAL_1
Status Schaltzustaende
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | $22 40 02 Schalterpositionen |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_KL15_EIN | int | Schalter Zuendung aktiv 0=Nein / 1=Ja Ignition Key Position on LV_IGK |
| STAT_MOTOR_AUS | int | Motor steht, LV_ESTART an 0=Nein / 1=Ja |
| STAT_KUPPL_EIN | int | Schalter Kupplung aktiv 0=Nein / 1=Ja Clutch Switch on LV_CS |
| STAT_BLS_EIN | int | Schalter BremsLicht aktiv 0=Nein / 1=Ja Brake Light Switch on LV_IM_BLS |
| STAT_BTS_EIN | int | Schalter BLTS aktiv 0=Nein / 1=Ja Brake Test Switch on LV_IM_BTS |
| STAT_KO_EIN | int | Anforderung Klimabereitschaft LV_ACCOUT_RLY 0=Aus / 1=Ein |
| STAT_AC_EIN | int | Kopie von STAT_KO_EIN |
STATUS_MOTORLAUFUNRUHE
$22 40 03 Laufunruhe fuer 6 Zylinder lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_MOTORLAUFUNRUHE_EINH | string | dimensionslos |
| STAT_ZYL1_WERT | real | gefilterte Laufunruhe Zylinder 1 Wertebereich 0 bis 40 |
| STAT_ZYL1_TEXT | string | Beschreibungstext |
| STAT_ZYL2_WERT | real | gefilterte Laufunruhe Zylinder 2 Wertebereich 0 bis 40 |
| STAT_ZYL2_TEXT | string | Beschreibungstext |
| STAT_ZYL3_WERT | real | gefilterte Laufunruhe Zylinder 3 Wertebereich 0 bis 40 |
| STAT_ZYL3_TEXT | string | Beschreibungstext |
| STAT_ZYL4_WERT | real | gefilterte Laufunruhe Zylinder 4 Wertebereich 0 bis 40 |
| STAT_ZYL4_TEXT | string | Beschreibungstext |
| STAT_ZYL5_WERT | real | gefilterte Laufunruhe Zylinder 5 Wertebereich 0 bis 40 |
| STAT_ZYL5_TEXT | string | Beschreibungstext |
| STAT_ZYL6_WERT | real | gefilterte Laufunruhe Zylinder 6 Wertebereich 0 bis 40 |
| STAT_ZYL6_TEXT | string | Beschreibungstext |
| STAT_VLS_UP_WERT1 | real | Spannung Lambdasonde Bank1 VK 0 bis 5V (FFC0 = 3FF*64) |
| STAT_VLS_UP_TEXT1 | string | Beschreibungstext |
| STAT_VLS_UP_WERT2 | real | Spannung Lambdasonde Bank2 VK 0 bis 5V (FFC0 = 3FF*64) |
| STAT_VLS_UP_TEXT2 | string | Beschreibungstext |
| STAT_GEBERRAD_ADAPTION_WERT | int | Kurbelwelle Segmentadaption beendet 0=nein / 1=ja |
STATUS_GEBERRAD_ADAPTION
$2C F0 02 DDLI Messwerte für NWG-Adaptionen auslesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT2 | binary | Hex-Antwort von SG |
| STAT_ANZAHL_WERTE | int | Anzahl Messwerte 0 bis 1 |
| STAT_GEBERRAD_ADAPTION_VSA_WERT | real | Wert von vsa_adp |
| STAT_GEBERRAD_ADAPTION_VSA_TEXT | string | Text von vsa_adp |
| STAT_GEBERRAD_ADAPTION_VSE_WERT | real | Wert von vse_adp |
| STAT_GEBERRAD_ADAPTION_VSE_TEXT | string | Text von vse_adp |
| STAT_GEBERRAD_ADAPTION_EINH | string | Einheit in Grd KW |
| STAT_SEG_AD_WERT | int | Kurbelwelle Segmentadaption beendet 0=nein / 1=ja |
STATUS_NOCKENWELLE_ADAPTION
$22 40 06 Nockenwellen Adaptionen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_EINH | string | Einheit der Werte ° Kurbelwelle |
| STAT_PSN_EDGE_AD_CAM_IN | real | Adaptierte Werte NW Einlass 1 Werte -32 bis +32 |
| STAT_PSN_EDGE_AD_CAM_IN_TEXT | string | Beschreibungstext |
| STAT_PSN_EDGE_AD_CAM_EX | real | Adaptierte Werte NW Auslass 1 Werte -32 bis +32 |
| STAT_PSN_EDGE_AD_CAM_EX_TEXT | string | Beschreibungstext |
| STAT_NC_PSN_EDGE_CAM_IN | real | Position zu TDC0 NW-Einlass Werte 0 bis 720 |
| STAT_NC_PSN_EDGE_CAM_IN_TEXT | string | Beschreibungstext |
| STAT_NC_PSN_EDGE_CAM_EX | real | Position zu TDC0 NW-Einlass Werte 0 bis 720 |
| STAT_NC_PSN_EDGE_CAM_EX_TEXT | string | Beschreibungstext |
STATUS_DIGITAL_0
Status Schaltzustaende $22 40 07 Betriebszustaende
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_LL_EIN | int | Leerlauf LV_LL 0=Nein / 1=Ja |
| STAT_SBBHK2 | int | Lambdaregelung Bank2 hinter Kat LV_DOWN_LS_2 0=aus, 1=ein |
| STAT_SBBHK | int | Lambdaregelung Bank1 hinter Kat LV_DOWN_LS_1 0=aus, 1=ein |
| STAT_SBBVK2 | int | Lambdaregelung Bank2 vor Kat LV_UP_LS_2 0=aus, 1=ein |
| STAT_SBBVK | int | Lambdaregelung Bank1 vor Kat LV_UP_LS_1 0=aus, 1=ein |
STATUS_FUNKTIONS
Status Schaltzustaende $22 40 07 Betriebszustaende
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_LL_EIN | int | Leerlauf LV_LL 0=Nein / 1=Ja |
| STAT_TEILLAST_EIN | int | Teillast 0=Nein / 1=Ja, wenn LL=0 und VL=0 |
| STAT_VL_EIN | int | BeschleunigungsanreicherungLV_FL 0=Aus / 1=Ein |
| STAT_LSHK2_EIN | int | Lambdaregelung Bank2 hinter Kat LV_DOWN_LS_2 0=aus, 1=ein |
| STAT_LSHK1_EIN | int | Lambdaregelung Bank1 hinter Kat LV_DOWN_LS_1 0=aus, 1=ein |
| STAT_LSVK2_EIN | int | Lambdaregelung Bank2 vor Kat LV_UP_LS_2 0=aus, 1=ein |
| STAT_LSVK1_EIN | int | Lambdaregelung Bank1 vor Kat LV_UP_LS_1 0=aus, 1=ein |
| STAT_LS2_REGELUNG | int | Regelkreis Bank 2 geschlossen LV_LSCL_2 0=Nein / 1=Ja |
| STAT_LS1_REGELUNG | int | Regelkreis Bank 1 geschlossen LV_LSCL_1 0=Nein / 1=Ja |
| STAT_KICKDOWN | int | Kickdown erkannt 0=nein / 1=ja |
| STAT_FAHRSTUFE | int | Gang eingelegt ,nicht Park/Neutral |
| STAT_SCHUBAB | int | Schubabschaltung 0=Aus / 1=Ein |
| STAT_DK_ABGLEICH | int | DK Abgleich neu lernen 0=nein / 1=erforderlich |
| STAT_DYN_LIM_1 | int | EGAS 1 Notlauf Limit dynamic 1 0=Aus / 1=Ein |
| STAT_DYN_LIM_2 | int | EGAS 2 Notlauf Limit dynamic 2 0=Aus / 1=Ein |
| STAT_FEHLER_CLSW | int | Fehler Kupplungsschalter 0=nein / 1=ja |
| STAT_FEHLER_MFL | int | Fehler MFL 0=nein / 1=ja |
| STAT_TIMEOUT_EGS1 | int | Timeout EGS 1 0=nein / 1=ja |
| STAT_FEHLER_BREMSE | int | Fehler Bremse 0=nein / 1=ja |
| STAT_MON_LEVEL2 | int | Monitoring Ebene 2 0=nein / 1=ja |
| STAT_V_PLAUSIBEL | int | Geschwindigkeit plausibel 0=nein / 1=ja |
| STAT_NOTLAUF_LL | int | Notlauf LL Steller 0=nein / 1=ja |
| STAT_NOTLAUF_DK | int | Notlauf DK Steller 0=nein / 1=ja |
| STAT_FEHLER_VS | int | Fehler Geschwindigkeit 0=nein / 1=ja |
| STAT_ASR_TIMEOUT | int | ASR meldet sich nicht 0=nein / 1=ja |
| STAT_EGAS_NOTLAUF | int | EGAS im Notbetrieb 0=nein / 1=ja |
| STAT_VS_DIF_HOCH | int | Geschw. Differenz zu hoch 0=nein / 1=ja |
| STAT_UEBERN_LANG | int | Übernahme zu lange 0=nein / 1=ja |
| STAT_VS_SP_MAX | int | Sollwert maximale Geschw. zu lang 0=nein / 1=ja |
| STAT_EXT_MOMENT | int | Externe Momenten Funktionseingriff 0=nein / 1=ja |
| STAT_MFL_AUS | int | MFL ausgeschaltet 0=nein / 1=ja |
| STAT_VS_CAN_LANG | int | CAN Geschwindigkeit Botschaft zu lang 0=nein / 1=ja |
| STAT_BESCHL_MON | int | Beschleunigungs Überwachung 0=aus / 1=ein |
| STAT_HOCHDREH_S | int | Run up lock Hochdrehsicherung 0=nein / 1=ja |
| STAT_TAKEOVER_VS | int | Übernehmen und Maximalgeschwindigkeit aktiv 0=nein / 1=ja |
| STAT_VS_FIL_LOW | int | Geschwindigkeit zu gering 0=nein / 1=ja |
| STAT_DREHZAHL_BEG | int | Drehzahlbegrenzer 0=nein / 1=ja |
| STAT_BREMSE_AKTIV | int | Bremsen festgestellt 0=nein / 1=ja |
| STAT_MFL_HARD_OFF | int | MFL Notaus 0=nein / 1=ja |
STATUS_ADAPTION_DK
$22 40 08 Adaption DK lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_FAC_EINH | string | Einheit ist % |
| STAT_ADD_EINH | string | Einheit ist cm² |
| STAT_DK_ADD_WERT | real | Adaption Leerlaufsteller Offset +-29,3 qcm |
| STAT_DK_ADD_TEXT | string | Beschreibungstext |
| STAT_DK_FAC_WERT | real | Adaption Leerlaufsteller multiplikativ +-50% |
| STAT_DK_FAC_TEXT | string | Beschreibungstext |
STATUS_ADAPTION_GEMISCH
$22 40 0A Adaption Lambda Regelung lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ADD_WERT1 | real | Adaption Gemisch additiv Bank1 |
| STAT_ADD_TEXT1 | string | Beschreibungstext |
| STAT_ADD_WERT2 | real | Adaption Gemisch additiv Bank2 |
| STAT_ADD_TEXT2 | string | Beschreibungstext |
| STAT_ADD_EINH | string | Einheit |
| STAT_FAC_WERT1 | real | Adaption Gemisch multiplikativ Bank1 |
| STAT_FAC_TEXT1 | string | Beschreibungstext |
| STAT_FAC_WERT2 | real | Adaption Gemisch multiplikativ Bank2 |
| STAT_FAC_TEXT2 | string | Beschreibungstext |
| STAT_FAC_EINH | string | Einheit |
| STAT_PWM_UP_WERT1 | real | PWM vor Kat Bank1 |
| STAT_PWM_UP_WERT2 | real | PWM vor Kat Bank2 |
| STAT_PWM_DOWN_WERT1 | real | PWM hinter Kat Bank1 |
| STAT_PWM_DOWN_WERT2 | real | PWM hinter Kat Bank2 |
| STAT_PWM_EINH | string | Einheit % |
| STAT_PWM_UP_TEXT1 | string | vor Kat Bank 1 |
| STAT_PWM_UP_TEXT2 | string | vor Kat Bank 2 |
| STAT_PWM_DOWN_TEXT1 | string | vor Kat Bank 1 |
| STAT_PWM_DOWN_TEXT2 | string | vor Kat Bank 2 |
STATUS_FASTA_COMMON
Messwerteblock lesen KWP2000: $2C F0 02 DynamicallyDefinedLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| STAT_AMP_MES_WERT | real | Umgebungsdruck |
| STAT_AMP_MES_EINH | string | Einheit hPa |
| STAT_DIST_ACT_MIL_WERT | real | Fahrstrecke mit MIL an |
| STAT_DIST_ACT_MIL_EINH | string | Einheit km |
| STAT_OZOELKM_WERT | real | km seit letztem Service |
| STAT_OZOELKM_EINH | string | Einheit km |
| STAT_OZKVBSM_UL_WERT | real | Kraftstoff-Verbrauch seit letztem Service |
| STAT_OZKVBSM_UL_EINH | string | Einheit l |
| STAT_N_WERT | real | Motor Drehzahl |
| STAT_N_EINH | string | Einheit rpm |
| STAT_N_SP_IS_WERT | real | Leerlauf Solldrehzahl |
| STAT_N_SP_IS_EINH | string | Einheit rpm |
| STAT_T_ES_WERT | real | Motorabstellzeit |
| STAT_T_ES_EINH | string | Einheit min |
| STAT_TCO_WERT | real | Kühlwassertemperatur |
| STAT_TCO_EINH | string | Einheit C |
| STAT_TCO_2_WERT | real | Kuehlerauslasstemperatur |
| STAT_TCO_2_EINH | string | Einheit C |
| STAT_TCO_ST_WERT | real | Motortemperatur beim Start |
| STAT_TCO_ST_EINH | string | Einheit C |
| STAT_TIA_WERT | real | Ansauglufttemperatur |
| STAT_TIA_EINH | string | Einheit C |
| STAT_TOEL_WERT | real | Öltemperatur |
| STAT_TOEL_EINH | string | Einheit C |
| STAT_VB_BAS_KWP_WERT | real | Spannung Kl. 87 |
| STAT_VB_BAS_KWP_EINH | string | Einheit C |
| STAT_STATE_ETC_LIH_WERT | real | Status Drosselklappe Notlauf |
| STAT_STATE_ETC_LIH_EINH | string | Einheit keine |
| STAT_CAM_SP_IVVT_EX_WERT | real | Nockenwelle Auslass Sollwert |
| STAT_CAM_SP_IVVT_EX_EINH | string | Einheit °CRK |
| STAT_CAM_SP_IVVT_IN_WERT | real | Nockenwelle Einlass Sollwert |
| STAT_CAM_SP_IVVT_IN_EINH | string | Einheit °CRK |
| STAT_ER_CYL_0_WERT | real | Laufunruhe Zylinder 1 |
| STAT_ER_CYL_0_EINH | string | Einheit keine |
| STAT_ER_CYL_1_WERT | real | Laufunruhe Zylinder 5 |
| STAT_ER_CYL_1_EINH | string | Einheit keine |
| STAT_ER_CYL_2_WERT | real | Laufunruhe Zylinder 3 |
| STAT_ER_CYL_2_EINH | string | Einheit keine |
| STAT_ER_CYL_3_WERT | real | Laufunruhe Zylinder 6 |
| STAT_ER_CYL_3_EINH | string | Einheit keine |
| STAT_ER_CYL_4_WERT | real | Laufunruhe Zylinder 2 |
| STAT_ER_CYL_4_EINH | string | Einheit keine |
| STAT_ER_CYL_5_WERT | real | Laufunruhe Zylinder 4 |
| STAT_ER_CYL_5_EINH | string | Einheit keine |
| STAT_IGA_IGC_0_WERT | real | Zündwinkel Zylinder 1 |
| STAT_IGA_IGC_0_EINH | string | Einheit keine |
| STAT_LSHPWM_UP_1_WERT | real | Lambdasondenheizung PWM vor Kat Bank 1 |
| STAT_LSHPWM_UP_1_EINH | string | Einheit % |
| STAT_LSHPWM_UP_2_WERT | real | Lambdasondenheizung PWM vor Kat Bank 2 |
| STAT_LSHPWM_UP_2_EINH | string | Einheit % |
| STAT_LSHPWM_DOWN_1_WERT | real | Lambdasondenheizung PWM nach Kat Bank 1 |
| STAT_LSHPWM_DOWN_1_EINH | string | Einheit % |
| STAT_LSHPWM_DOWN_2_WERT | real | Lambdasondenheizung PWM nach Kat Bank 2 |
| STAT_LSHPWM_DOWN_2_EINH | string | Einheit % |
| STAT_MAF_KGH_MES_BAS_WERT | real | Luftmasse |
| STAT_MAF_KGH_MES_BAS_EINH | string | Einheit kg/h |
| STAT_TQ_DIF_I_IS_MON_WERT | real | I-Anteil Momentdifferenz Überwachung und Modell |
| STAT_TQ_DIF_I_IS_MON_EINH | string | Einheit Nm |
ECU_CONFIG
$22 5F F2 Fahrzeug Varianten lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_AT | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_AT_TEXT | string | Automatik Getriebe |
| STAT_AC | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_AC_TEXT | string | KlimaAnlage |
| STAT_AMT | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_AMT_TEXT | string | SMG Sequentielles Manuelles Getriebe |
| STAT_ARS | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ARS_TEXT | string | Roll Stabilisierung |
| STAT_ASR | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ASR_TEXT | string | ASR Anti Schlupf Regelung |
| STAT_DUMMY | int | not used yet |
| STAT_DUMMY_TEXT | string | Not used yet |
| STAT_BN_MSW | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_MSW_TEXT | string | Tempomat über CAN |
| STAT_DCC | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_DCC_TEXT | string | Entfernungs-Überwachung vorhanden |
| STAT_EBOX_CFA | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_EBOX_CFA_TEXT | string | E-Box Lüfter vorhanden |
| STAT_ETCU | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ETCU_TEXT | string | SMG/EGS Steuergerät vorhanden |
| STAT_ICL | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ICL_TEXT | string | Kombi über CAN vorhanden |
| STAT_MSW | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_MSW_TEXT | string | MultiFunktionsLenkrad vorhanden |
| STAT_PSTE | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_PSTE_TEXT | string | elektrische Lenkung vorhanden |
| STAT_SOF | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_SOF_TEXT | string | Soundklappe vorhanden |
| STAT_SOF_SWI | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_SOF_SWI_TEXT | string | Sport-Taster vorhanden |
| STAT_GEAR | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_GEAR_TEXT | string | Komfort-Start vorhanden |
| STAT_DUMMY1 | int | not used yet |
| STAT_DUMMY_TEXT1 | string | not used yet |
| STAT_VEH | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_VEH_TEXT | string | Fahrzeugvariante mit Power Modul (E60/E65) erkannt - nur BN 2000 |
| STAT_SAP_VORHANDEN | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_SAP_VORHANDEN_TEXT | string | Sekundär Luft Pumpe vorhanden |
| STAT_EF | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_EF_TEXT | string | Abgas-Klappe vorhanden |
| STAT_ECRAS | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ECRAS_TEXT | string | Kühler Jalousie vorhanden |
| STAT_RLY_ACCOUT | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_RLY_ACCOUT_TEXT | string | KlimaRelais vorhanden |
| STAT_SAV | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_SAV_TEXT | string | SecundaryAir Ventil vorhanden |
| STAT_RLY_ST | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_RLY_ST_TEXT | string | Starter Relais vorhanden |
| STAT_ASR3 | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ASR3_TEXT | string | ASR3 Bauteil vorhanden |
| STAT_BN_LDM | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_LDM_TEXT | string | LängsDynamikManagement detected (E9x only) |
| STAT_BN_LTG_HDLP_L | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_LTG_HDLP_L_TEXT | string | Lampenzustand //Dipped Beam via CAN recognized (BN2000 only) |
| STAT_LSH_DOWN | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_LSH_DOWN_TEXT | string | Lambdasonde vor Kat //variant for CAT/exahust type |
| STAT_LSH_UP | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_LSH_UP_TEXT | string | Lambdasonde nach Kat //variant for CAT/exahust type |
| STAT_ASR_4 | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_ASR_4_TEXT | string | ASC4 device recognized |
| STAT_MAF | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_MAF_TEXT | string | HeissFilmluftmassenMesser //variant mass air flow meter |
| STAT_PST_2 | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_PST_2_TEXT | string | AFS //LV power steering detected - BN2000 |
| STAT_BN_EFP | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_EFP_TEXT | string | Elektrische Kraftstoffpumpe über CAN //EFP via CAN recognized (BN2000 only) |
| STAT_SENS_BAT_SMT_DET | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_SENS_BAT_SMT_DET_TEXT | string | Intelligenter Batteriesensor //IBS has been detected |
| STAT_BN_TRL | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_TRL_TEXT | string | Anhängermodul //TRL detected |
| STAT_BN_HIV | int | Status der Variante 0=nicht vorhanden / 1=vorhanden |
| STAT_BN_HIV_TEXT | string | Wasserventil //HI-valve detected |
SPEICHER_LESEN
Auslesen des Steuergeraete-Speichers Als Argumente werden uebergeben: Speichersegment, Start-Adresse und Anzahl der Datenbytes KWP 2000: $23 ReadMemoryByAddress Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SEGMENT | string | table SpeicherSegment SEG_NAME SEG_TEXT |
| ADRESSE | long | 0x000000 - 0xFFFFFF |
| ANZAHL | int | 1 - n ( 254 ) |
Results
| Name | Type | Comment |
|---|---|---|
| DATEN | binary | ausgelesene Daten |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SPEICHER_LESEN_ASCII
Auslesen des Steuergeraete-Speichers Als Argumente werden uebergeben: Speichersegment, Start-Adresse und Anzahl der Datenbytes KWP 2000: $23 ReadMemoryByAddress Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SEGMENT | string | table SpeicherSegment SEG_NAME SEG_TEXT |
| ADRESSE | long | 0x000000 - 0xFFFFFF |
| ANZAHL | int | 1 - n ( 254 ) |
Results
| Name | Type | Comment |
|---|---|---|
| DATEN | binary | ausgelesene Daten |
| DATEN_ASCII | string | ausgelesene Daten als ASCII Format |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ECU_CONFIG_RESET
$22 5F F2 04 gelernte FahrzeugVarianten löschen
Arguments
| Name | Type | Comment |
|---|---|---|
| AUSWAHLBYTE_1 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_2 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_3 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_4 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_5 | int | Bit=1 löscht Bit=0 behält alten Wert |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_ADD
Auslesen der additiven Korrektur Bank 1 KWP 2000* MFF_AD_ADD_MMV_REL[1]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ADD_WERT | real | +-694,5 Wert von MFF_AD_ADD_MMV_REL[1] |
| STAT_ADD_EINH | string | Einheit in mg/Hub |
STATUS_ADD_2
Auslesen der additiven Korrektur Bank 2 KWP 2000* MFF_AD_ADD_MMV_REL[2]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ADD_2_WERT | real | +-694,5 Wert von MFF_AD_ADD_MMV_REL[2] |
| STAT_ADD_EINH | string | Einheit in mg/Hub |
STATUS_MUL
Auslesen des Korrekturfaktors Bank 1 KWP 2000* MFF_AD_FAC_MMV_REL[1]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MUL_WERT | real | +-50 Wert von MFF_AD_FAC_MMV_REL[1] |
| STAT_MUL_EINH | string | Einheit in % |
STATUS_MUL_2
Auslesen des Korrekturfaktors Bank 1 KWP 2000* MFF_AD_FAC_MMV_REL[2]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MUL_2_WERT | real | +-50 Wert von MFF_AD_FAC_MMV_REL[2] |
| STAT_MUL_EINH | string | Einheit in % |
STATUS_INT
Auslesen des Integrator Bank 1 KWP 2000* TI_LAM_COR[1]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_INT_WERT | real | +-50 Wert von TI_LAM_COR[1] |
| STAT_INT_EINH | string | Einheit in % |
STATUS_INT_2
Auslesen des Integrator Bank 1 KWP 2000* TI_LAM_COR[1]
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_INT_2_WERT | real | +-50 Wert von TI_LAM_COR[1] |
| STAT_INT_EINH | string | Einheit in % |
STATUS_LL_ABGLEICH
LL-Abgleichswerte lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| STAT_OFS_ACC_DRI | int | Abgleichswert LL mit Klima und Fahrbedingung |
| STAT_OFS_DRI | int | Abgleichswert LL mit Fahrstufe |
| STAT_OFS | int | Abgleichswert LL |
| STAT_OFS_ACC | int | Abgleichswert LL mit Klimaanlage |
| STAT_OFS_VB | int | Abgleichswert LL mit niedriger UBatt |
| STAT_OFS_EINH | string | Einheit LL-Drehzahl immer 1/min |
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_ANTWORT | binary | Antwort vom SG |
| _TEL_AUFTRAG | binary | Auftrag an SG |
STEUERN_LL_ABGLEICH
LL-Abgleich vorgegeben -256 bis +254
Arguments
| Name | Type | Comment |
|---|---|---|
| STAT_OFS_ACC_DRI | int | Abgleichswert LL mit Klima und Fahrbedingung |
| STAT_OFS_DRI | int | Abgleichswert LL mit Fahrstufe |
| STAT_OFS | int | Abgleichswert LL |
| STAT_OFS_ACC | int | Abgleichswert LL mit Klimaanlage |
| STAT_OFS_VB | int | Abgleichswert LL mit niedriger UBatt |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_ANTWORT | binary | Antwort vom SG |
| _TEL_AUFTRAG | binary | Auftrag an SG |
STEUERN_LLABG_PROG
LL-Abgleichswerte werden vorgegeben
Arguments
| Name | Type | Comment |
|---|---|---|
| STAT_OFS_ACC_DRI | int | Abgleichswert LL mit Klima und Fahrbedingung |
| STAT_OFS_DRI | int | Abgleichswert LL mit Fahrstufe |
| STAT_OFS | int | Abgleichswert LL |
| STAT_OFS_ACC | int | Abgleichswert LL mit Klimaanlage |
| STAT_OFS_VB | int | Abgleichswert LL mit niedriger UBatt |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_ANTWORT | binary | Antwort vom SG |
| _TEL_AUFTRAG | binary | Auftrag an SG |
FLASH_CRC_PRUEFEN
Codier Checksumme pruefen KWP2000: $31 StartRoutineByLocalIdentifier $01 Checksum
Arguments
| Name | Type | Comment |
|---|---|---|
| ZEIT | int | Zeit in Sekunden |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
HS_LOESCHEN
Historyspeicher loeschen KWP2000: $31 StartRoutineByLocalIdentifier $03 ClearHistoryMemory Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
DME_STARTWERT_ABGLEICH
Kopiert die ISN auf beide Wechselcodes KWP2000: $31 StartRoutineByLocalIdentifier LocalIdentifier $20 Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_SEK_LUFT
$31 20 Systemdiagnose SLS SekundärLuftSystem starten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_TEV_FUNC
$31 22 Systemdiagnose TEVstarten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_EVAUSBL
$31 25 Systemdiagnose Einspritzventil abschalten
Arguments
| Name | Type | Comment |
|---|---|---|
| VENTIL_NR | int | Zylinder 1 bis 6 Ventil ausgeblenden oder 63 alle |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_LLERH
$31 26 Systemdiagnose EOL LL-Erhöhen starten
Arguments
| Name | Type | Comment |
|---|---|---|
| LL_WERT | int | LL-Sollwert 0 bis 2000 1/min |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_VVT_ANSCHLAG
$31 27 Systemdiagnose VVT-Anschläge lernen starten
Arguments
| Name | Type | Comment |
|---|---|---|
| PARAMETER | int | 1 unten lernen, 6 beide lernen, 2 Byte Befehl sonst |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
EWS_STARTWERT
EWS-Startwertinitialisierung
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| EWS_STATUS | string | Rueckgabestatus bei der Startwertinitialisierung |
| STAT_EWS_WERT | int | Rueckgabewert bei der Startwertinitialisierung |
EWS_STARTWERTPROGRAMMIERUNG
EWS-Startwertinitialisierung
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| EWS_STATUS_PROGRAMMIERUNG | string | Rueckgabestatus bei der Startwertinitialisierung |
| STAT_EWS_PROGRAMMIERUNG_WERT | int | Rueckgabewert bei der Startwertinitialisierung |
EWS_STARTWERTRUECKSETZUNG
EWS-Startwertinitialisierung
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| EWS_STATUS_RUECKSETZUNG | string | Rueckgabestatus bei der Startwertinitialisierung |
| STAT_EWS_RUECKSETZUNG_WERT | int | Rueckgabewert bei der Startwertinitialisierung |
START_SYSTEMCHECK_L_REGELUNG_AUS
$31 D9 01 Systemdiagnose LambdaRegelung abschalten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_L_REGELUNG_AUS
$31 D9 01 Systemdiagnose LambdaRegelung einschalten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_DMTL
$31 DA Systemdiagnose DMTL starten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_L_SONDE
$31 DF Systemdiagnose vertauschte L-Sonden starten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
RESET_CRU_OFF
$31 F4 STATE_CRU_OFF_IRR und STATE_CRU_OFF_REV löschen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_VVT_SOLLWERT
$31 FE Systemdiagnose VVT Steuerung ueber CAN freigeben
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_VVT_SOLLWERT
$31 FE Systemdiagnose VVT Steuerung ueber CAN freigeben
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_SEK_LUFT
$32 20 Systemdiagnose SekundärLuftSystem beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_TEV_FUNC
$32 22 Systemdiagnose TEV beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_EVAUSBL
$32 25 Ende Systemtest Ventil Abschalten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_LLERH
$32 26 EOL-Test LL-Anheben beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_VVT_ANSCHLAG
$32 27 Systemdiagnose VVT-Anschläge lernen starten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_DMTL
$32 DA Systemdiagnose DMTL beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_L_SONDE
$32 DF Systemdiagnose vertauschte L-Sonden beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_SYSTEMCHECK_SEK_LAMBDA_WERT
Status und Luftmassen KWP 2000* $33 20 RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_LAMBDA_WERT | int | Systemdiagnose SLS mit linearer Lambdasonde |
| STAT_DIAGNOSE_LAMBDA_TEXT | string | 0=Init ... |
| STAT_SUM_AFL_VLS_DIAG_SA_1_WERT | real | Lambdawert 0 -65535 |
| STAT_SUM_AFL_VLS_DIAG_SA_1_TEXT | string | |
| STAT_SUM_AFL_VLS_DIAG_SA_1_EINH | string | |
| STAT_SUM_AFL_VLS_DIAG_SA_2_WERT | real | Lambdawert 0 -65535 |
| STAT_SUM_AFL_VLS_DIAG_SA_2_TEXT | string | |
| STAT_SUM_AFL_VLS_DIAG_SA_2_EINH | string |
STATUS_SYSTEMCHECK_TEV_WERT
Status und Messströme KWP 2000* $33 22 RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | 0=Init ... |
| STAT_DIAGNOSE_TEXT | string | 0=Init ... |
| STAT_SYSTEMCHECK_TEV_FUNC_1_WERT | int | Zyklus 0 - 255 |
| STAT_SYSTEMCHECK_TEV_FUNC_1_TEXT | string | |
| STAT_SYSTEMCHECK_TEV_FUNC_2_WERT | int | Zyklus 0 - 255 |
| STAT_SYSTEMCHECK_TEV_FUNC_2_TEXT | string |
STATUS_SYSTEMCHECK_LLERH_WERT
aktuelle Drehzahl N KWP 2000* $33 26 RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_SYSTEMCHECK_LLERH_WERT | int | LL Drehzahl |
| STAT_SYSTEMCHECK_LLERH_TEXT | string |
STATUS_SYSTEMCHECK_DMTL_WERT
Status und Messströme KWP 2000* $33 DA RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_WERT | int | 0=Start ... C=Ende |
| STAT_DIAGNOSE_TEXT | string | 0=Start ... |
| STAT_STROM_REF_WERT | real | Messwert 0 - 400 mA |
| STAT_STROM_REF_EINH | string | Einheit mA |
| STAT_STROM_REF_TEXT | string | Strom Referenzleck |
| STAT_STROM_GROB_WERT | real | Messwert 0 - 400 mA |
| STAT_STROM_GROB_EINH | string | Einheit mA |
| STAT_STROM_GROB_TEXT | string | Strom Grobleck |
| STAT_STROM_WERT | real | Messwert 0 - 400 mA |
| STAT_STROM_EINH | string | Einheit mA |
| STAT_STROM_TEXT | string | Strom aktueller Wert |
STATUS_SYSTEMCHECK_L_SONDE_WERTE
Status und Messwerte KWP 2000* $33 DF RequestRoutineResultsByLocalIdentifier
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_DIAGNOSE_1_WERT | int | 0=Init ... |
| STAT_DIAGNOSE_1_TEXT | string | 0=Init ... |
| STAT_SYSTEMCHECK_L_SONDE_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_2_WERT | int | Zahlenwert Diagnose Ablauf |
| STAT_DIAGNOSE_2_TEXT | string | 0=Init ... |
| STAT_LAMB_LS_UP_AFR_EOL_1_WERT | real | Lambdawert vor Kat Bank 1 0 - 32 |
| STAT_LAMB_LS_UP_AFR_EOL_1_EINH | string | V |
| STAT_LAMB_LS_UP_AFR_EOL_1_TEXT | string | |
| STAT_LAMB_LS_UP_AFR_EOL_2_WERT | real | Lambdawert vor Kat Bank 1 0 - 32 |
| STAT_LAMB_LS_UP_AFR_EOL_2_EINH | string | V |
| STAT_LAMB_LS_UP_AFR_EOL_2_TEXT | string | |
| STAT_LAMB_LS_UP_AFL_EOL_1_WERT | real | Lambdawert vor Kat Bank 1 0 - 32 |
| STAT_LAMB_LS_UP_AFL_EOL_1_EINH | string | V |
| STAT_LAMB_LS_UP_AFL_EOL_1_TEXT | string | |
| STAT_LAMB_LS_UP_AFL_EOL_2_WERT | real | Lambdawert vor Kat Bank 1 0 - 32 |
| STAT_LAMB_LS_UP_AFL_EOL_2_EINH | string | V |
| STAT_LAMB_LS_UP_AFL_EOL_2_TEXT | string | |
| STAT_VLS_DOWN_AFR_EOL_1_WERT | real | Spannung vor Kat Bank 1 0 - 5 V |
| STAT_VLS_DOWN_AFR_EOL_1_EINH | string | V |
| STAT_VLS_DOWN_AFR_EOL_1_TEXT | string | |
| STAT_VLS_DOWN_AFR_EOL_2_WERT | real | Spannung vor Kat Bank 2 0 - 5 V |
| STAT_VLS_DOWN_AFR_EOL_2_EINH | string | V |
| STAT_VLS_DOWN_AFR_EOL_2_TEXT | string | |
| STAT_VLS_DOWN_AFL_EOL_1_WERT | real | Spannung vor Kat Bank 1 0 - 5 V |
| STAT_VLS_DOWN_AFL_EOL_1_EINH | string | V |
| STAT_VLS_DOWN_AFL_EOL_1_TEXT | string | |
| STAT_VLS_DOWN_AFL_EOL_2_WERT | real | Spannung vor Kat Bank 2 0 - 5 V |
| STAT_VLS_DOWN_AFL_EOL_2_EINH | string | V |
| STAT_VLS_DOWN_AFL_EOL_2_TEXT | string | |
| STAT_MAF_INT_MIN_VLS_EOL_WERT | real | Luftmasse 0 - 1820 g |
| STAT_MAF_INT_MIN_VLS_EOL_EINH | string | g |
| STAT_MAF_INT_MIN_VLS_EOL_TEXT | string |
STEUERN_KVA
Faktor KVA Korrektur vorgeben KWP 2000* $3B C1 kva-faktor WriteDataByLocalIdentifier
Arguments
| Name | Type | Comment |
|---|---|---|
| KVA_WERT | int | Faktor KVA 80 - 7F = -0,128 - 0,127 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_ANALOG
Analogen Messwert periodisch lesen KWP2000: $2C F0 02 DynamicallyDefinedLocalIdentifier
Arguments
| Name | Type | Comment |
|---|---|---|
| DEVICE | string | Nummer nach DDLI Liste |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ANALOG_TEXT | string | Beschreibung der Variablen |
| STAT_ANALOG_WERT | real | Wert skaliert nach DDLI Liste |
| STAT_ANALOG_EINH | string | Einheit aus DDLI Liste |
STATUS_FASTA2
$2C F0 02 DDLI Messwerte nach Wunsch EA-36
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_N_SP_IS_WERT | real | Sollwert Leerlauf |
| STAT_RL_WERT | real | relative Last |
| STAT_BIOS_TI_0_WERT | real | EinspritzZeit Zyl.1 |
| STAT_TPS_AV_WERT | real | Position Drosselklappe |
| STAT_TPS_SP_WERT | real | Sollwert Drosselklappe |
| STAT_PV_AV_RAW_WERT | real | Fahrpedalwert |
| STAT_IGA_IGC_0_WERT | real | Zündzeitpunkt Zyl.1 |
| STAT_OZOELKM_WERT | real | km seit letztem Service |
| STAT_OZKVBSM_UL_WERT | real | Spritverbrauch seit letztem Service |
STATUS_MESSWERTE_NL
$2C F0 02 DDLI Messwerte Klopfen nach Wunsch VS-22
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_L | binary | Hex-Auftrag an SG alten Block löschen |
| _TEL_ANTWORT_L | binary | Hex-Antwort von SG alten Block löschen |
| _TEL_AUFTRAG_S | binary | Hex-Auftrag an SG Block schreiben |
| _TEL_ANTWORT_S | binary | Hex-Antwort von SG Block schreiben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_ANZAHL_WERTE | int | Anzahl Messwerte 0 bis 16 |
| STAT_MESSWERT0_WERT | real | Messwert (Word) |
| STAT_MESSWERT0_STRING | string | Messwert (Word) |
| STAT_MESSWERT0_TEXT | string | Messwert |
| STAT_MESSWERT0_EINH | string | Messwert |
| STAT_MESSWERT1_WERT | real | Messwert (Word) |
| STAT_MESSWERT1_STRING | string | Messwert (Word) |
| STAT_MESSWERT1_TEXT | string | Messwert |
| STAT_MESSWERT1_EINH | string | Messwert |
| STAT_MESSWERT2_WERT | real | Messwert (Word) |
| STAT_MESSWERT2_STRING | string | Messwert (Word) |
| STAT_MESSWERT2_TEXT | string | Messwert |
| STAT_MESSWERT2_EINH | string | Messwert |
| STAT_MESSWERT3_WERT | real | Messwert (Word) |
| STAT_MESSWERT3_STRING | string | Messwert (Word) |
| STAT_MESSWERT3_TEXT | string | Messwert |
| STAT_MESSWERT3_EINH | string | Messwert |
| STAT_MESSWERT4_WERT | real | Messwert (Word) |
| STAT_MESSWERT4_STRING | string | Messwert (Word) |
| STAT_MESSWERT4_TEXT | string | Messwert |
| STAT_MESSWERT4_EINH | string | Messwert |
| STAT_MESSWERT5_WERT | real | Messwert (Word) |
| STAT_MESSWERT5_STRING | string | Messwert (Word) |
| STAT_MESSWERT5_TEXT | string | Messwert |
| STAT_MESSWERT5_EINH | string | Messwert |
STATUS_MESSWERTBLOCK_ADC
$21 F0 DDLI Messwerteblock lesen der zuletzt mit $2C F0 definiert wurde
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| _TEL_AUFTRAG_D | binary | Hex-Auftrag an SG delete |
| _TEL_AUFTRAG_W | binary | Hex-Auftrag an SG write |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_D | binary | Hex-Antwort von SG loeschen |
| _TEL_ANTWORT_W | binary | Hex-Antwort von SG schreiben |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_MESSWERT0_WERT | real | Messwert (Word) |
| STAT_MESSWERT0_TEXT | string | Messwert |
| STAT_MESSWERT0_EINH | string | Messwert |
| STAT_MESSWERT1_WERT | real | Messwert (Word) |
| STAT_MESSWERT1_TEXT | string | Messwert |
| STAT_MESSWERT1_EINH | string | Messwert |
| STAT_MESSWERT2_WERT | real | Messwert (Word) |
| STAT_MESSWERT2_TEXT | string | Messwert |
| STAT_MESSWERT2_EINH | string | Messwert |
| STAT_MESSWERT3_WERT | real | Messwert (Word) |
| STAT_MESSWERT3_TEXT | string | Messwert |
| STAT_MESSWERT3_EINH | string | Messwert |
| STAT_MESSWERT4_WERT | real | Messwert (Word) |
| STAT_MESSWERT4_TEXT | string | Messwert |
| STAT_MESSWERT4_EINH | string | Messwert |
| STAT_MESSWERT5_WERT | real | Messwert (Word) |
| STAT_MESSWERT5_TEXT | string | Messwert |
| STAT_MESSWERT5_EINH | string | Messwert |
| STAT_MESSWERT6_WERT | real | Messwert (Word) |
| STAT_MESSWERT6_TEXT | string | Messwert |
| STAT_MESSWERT6_EINH | string | Messwert |
| STAT_MESSWERT7_WERT | real | Messwert (Word) |
| STAT_MESSWERT7_TEXT | string | Messwert |
| STAT_MESSWERT7_EINH | string | Messwert |
| STAT_MESSWERT8_WERT | real | Messwert (Word) |
| STAT_MESSWERT8_TEXT | string | Messwert |
| STAT_MESSWERT8_EINH | string | Messwert |
| STAT_MESSWERT9_WERT | real | Messwert (Word) |
| STAT_MESSWERT9_TEXT | string | Messwert |
| STAT_MESSWERT9_EINH | string | Messwert |
| STAT_MESSWERTA_WERT | real | Messwert (Word) |
| STAT_MESSWERTA_TEXT | string | Messwert |
| STAT_MESSWERTA_EINH | string | Messwert |
| STAT_MESSWERTB_WERT | real | Messwert (Word) |
| STAT_MESSWERTB_TEXT | string | Messwert |
| STAT_MESSWERTB_EINH | string | Messwert |
| STAT_MESSWERTC_WERT | real | Messwert (Word) |
| STAT_MESSWERTC_TEXT | string | Messwert |
| STAT_MESSWERTC_EINH | string | Messwert |
| STAT_MESSWERTD_WERT | real | Messwert (Word) |
| STAT_MESSWERTD_TEXT | string | Messwert |
| STAT_MESSWERTD_EINH | string | Messwert |
| STAT_MESSWERTE_WERT | real | Messwert (Word) |
| STAT_MESSWERTE_TEXT | string | Messwert |
| STAT_MESSWERTE_EINH | string | Messwert |
| STAT_MESSWERTF_WERT | real | Messwert (Word) |
| STAT_MESSWERTF_TEXT | string | Messwert |
| STAT_MESSWERTF_EINH | string | Messwert |
| STAT_MESSWERT10_WERT | real | Messwert (Word) |
| STAT_MESSWERT10_TEXT | string | Messwert |
| STAT_MESSWERT10_EINH | string | Messwert |
| STAT_MESSWERT11_WERT | real | Messwert (Word) |
| STAT_MESSWERT11_TEXT | string | Messwert |
| STAT_MESSWERT11_EINH | string | Messwert |
| STAT_MESSWERT12_WERT | real | Messwert (Word) |
| STAT_MESSWERT12_TEXT | string | Messwert |
| STAT_MESSWERT12_EINH | string | Messwert |
| STAT_MESSWERT13_WERT | real | Messwert (Word) |
| STAT_MESSWERT13_TEXT | string | Messwert |
| STAT_MESSWERT13_EINH | string | Messwert |
INITIALISIERUNG
Initialisierung und Kommunikationsparameter
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| DONE | int | 1, wenn Okay |
INFO
Information SGBD
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ECU | string | Steuergerät im Klartext |
| ORIGIN | string | Steuergeräte-Verantwortlicher |
| REVISION | string | Versions-Nummer |
| AUTHOR | string | Namen aller Autoren |
| COMMENT | string | wichtige Hinweise |
| PACKAGE | string | Include-Paket-Nummer |
| SPRACHE | string | deutsch, english |
DIAGNOSEPROTOKOLL_LESEN
Gibt die möglichen Diagnoseprotokolle für eine Auswahl an den Aufrufer zurück
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY oder ERROR_DIAG_PROT |
| DIAG_PROT_IST | string | Gibt das aktuelle gewählte Protokoll aus table KONZEPT_TABELLE KONZEPT_TEXT |
| DIAG_PROT_ANZAHL | int | Anzahl der Diagnoseprotokolle |
| DIAG_PROT_NR1 | string | Alle möglichen Diagnose-Protokolle Falls mehrere Protokolle möglich sind werden die entsprechenden Results DIAG_PROT_NRx dynamisch erzeugt |
DIAGNOSEPROTOKOLL_SETZEN
Wählt ein Diagnoseprotokoll aus
Arguments
| Name | Type | Comment |
|---|---|---|
| DIAG_PROT | string | Diagnoseprotokoll table KONZEPT_TABELLE KONZEPT_TEXT |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY |
IDENT
Identdaten KWP2000: $1A ReadECUIdentification Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ID_BMW_NR | string | BMW-Teilenummer |
| ID_HW_NR | string | BMW-Hardware-Versionsindex |
| ID_COD_INDEX | int | Codier-Index |
| ID_DIAG_INDEX | int | Diagnose-Index |
| ID_VAR_INDEX | int | Varianten-Index |
| ID_DATUM_JAHR | int | Herstelldatum (Jahr) |
| ID_DATUM_MONAT | int | Herstelldatum (Monat) |
| ID_DATUM_TAG | int | Herstelldatum (Tag) |
| ID_DATUM | string | Herstelldatum (TT.MM.JJJJ) |
| ID_LIEF_NR | int | Lieferanten-Nummer |
| ID_LIEF_TEXT | string | Lieferanten-Text table Lieferanten LIEF_TEXT |
| ID_SW_NR_MCV | string | Softwarenummer (message catalogue version) |
| ID_SW_NR_FSV | string | Softwarenummer (functional software version) |
| ID_SW_NR_OSV | string | Softwarenummer (operating system version) |
| ID_SW_NR_RES | string | Softwarenummer (reserved - currently unused) |
| ID_SG_ADR | long | Steuergeraeteadresse bzw. LIN Master Steuergeraeteadresse |
| ID_LIN_SLAVE_ADR | long | LIN Slave Steuergeraeteadresse |
| ID_EWS_SS | int | Identifikation EWS-Schnittstelle Nur fuer DS2-Bordnetz benoetigt Fuer EWS-DME/DDE Abgleich |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FS_LESEN
Fehlerspeicher lesen (alle Fehler / Ort und Art) KWP2000: $18 ReadDiagnosticTroubleCodesByStatus Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| F_VERSION | int | Typ des Fehlerspeichers Fuer KWP-2000 immer 2 |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
| F_ORT_NR | long | Index fuer Fehlerort |
| F_ORT_TEXT | string | Fehlerort als Text table FOrtTexte ORTTEXT |
| F_SYMPTOM_NR | int | Fehlersymptom (Standard-Fehlerart) als Zahl |
| F_SYMPTOM_TEXT | string | Fehlersymptom (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_READY_NR | int | Readyness Flag (Standard-Fehlerart) als Zahl |
| F_READY_TEXT | string | Readyness Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_VORHANDEN_NR | int | Fehler vorhanden (Standard-Fehlerart) als Zahl |
| F_VORHANDEN_TEXT | string | Fehler vorhanden (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| F_WARNUNG_NR | int | Warnlampen Flag (Standard-Fehlerart) als Zahl |
| F_WARNUNG_TEXT | string | Warnlampen Flag (Standard-Fehlerart) als Text table FArtTexte ARTTEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FS_LOESCHEN
Fehlerspeicher loeschen KWP2000: $14 ClearDiagnosticInformation Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| F_CODE | int | 0x????: Angabe eines einzelnen Fehlers 0xFFFB: alle Antriebsfehler 0xFFFC: alle Fahrwerkfehler 0xFFFD: alle Karosseriefehler 0xFFFE: alle Netzwerkfehler Default: 0xFFFF: alle Fehler |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
PRUEFSTEMPEL_LESEN
Auslesen des Pruefstempels KWP2000: $22 ReadDataByCommonIdentifier $1000 TestStamp Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| BYTE1 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
PRUEFSTEMPEL_SCHREIBEN
Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden. KWP2000: $2E WriteDataByCommonIdentifier $1000 TestStamp Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | Bereich: 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | Bereich: 0-255 bzw. 0x00-0xFF |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
NORMALER_DATENVERKEHR
Sperren bzw. Freigeben des normalen Datenverkehrs KWP2000: $28 DisableNormalMessageTransmission KWP2000: $29 EnableNormalMessageTransmission Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| FREIGEBEN | string | "ja" -> normalen Datenverkehr freigeben "nein" -> normalen Datenverkehr sperren table DigitalArgument TEXT |
| SG_ANTWORT | string | "ja" -> SG soll antworten "nein" -> SG soll nicht antworten table DigitalArgument TEXT Default: SG soll antworten |
| FUNKTIONAL | string | "ja" -> Funktionale Adresse 0xEF wird benutzt nur in Verbindung mit SG_ANTWORT="nein" "nein" -> SG Adresse wird benutzt table DigitalArgument TEXT Default: SG Adresse wird benutzt |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
DIAGNOSE_AUFRECHT
Diagnosemode des SG aufrecht erhalten KWP2000: $3E TesterPresent Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| SG_ANTWORT | string | "ja" -> SG soll antworten "nein" -> SG soll nicht antworten table DigitalArgument TEXT Default: SG soll antworten |
| FUNKTIONAL | string | "ja" -> Funktionale Adresse 0xEF wird benutzt nur in Verbindung mit SG_ANTWORT="nein" "nein" -> SG Adresse wird benutzt table DigitalArgument TEXT Default: SG Adresse wird benutzt |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SERIENNUMMER_LESEN
Hersteller Seriennummer lesen KWP2000: $1A ReadECUIdentification $89 SystemSupplierECUSerialNumber oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| SERIENNUMMER | string | Seriennummer des Steuergeraets |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
ZIF_LESEN
Auslesen des Zulieferinfofeldes KWP2000: $22 ReadDataByCommonIdentifier $2503 ProgrammReferenz und KWP2000: $1A ReadECUIdentification $91 VehicleManufacturerECUHardware*Number oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| ZIF_PROGRAMM_REFERENZ | string | PRGREF ProgrammReferenz letzter lauffaehiger Programmstand Format: ZZZPPPxVBBxh 12 Byte ASCII ZZZ : Hardwarelieferant PPP : Hardwarerelevanz zum Programmstand x : nicht programmrelevante Varianten der Hardware V : Projektvariante BB : Programmstand x : nicht datenrelevanter Änderungsindex h : Programmstandersteller |
| ZIF_SG_KENNUNG | string | ZZZ |
| ZIF_PROJEKT | string | PPPxV |
| ZIF_PROGRAMM_STAND | string | BBxh |
| ZIF_STATUS | int | Dateninhalt bei FF noch nicht beschrieben |
| ZIF_BMW_HW | string | VMECUHN vehicleManufacturerECUHardwareNumber BMW Hardware Nummer |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_3 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_3 | binary | Hex-Antwort von SG |
ZIF_BACKUP_LESEN
Auslesen des Backups des Zulieferinfofeldes ProgrammReferenzBackup PRGREFB vehicleManufECUHWNumberBackup VMECUHNB KWP2000: $22 ReadDataByCommonIdentifier $2500 PRBHW*B oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | "OKAY", wenn fehlerfrei |
| ZIF_BACKUP_PROGRAMM_REFERENZ | string | PRGREFB ProgrammReferenzBackup letzter lauffaehiger Programmstand Format: ZZZPPPxVBBxh 12 Byte ASCII ZZZ : Hardwarelieferant PPP : Hardwarerelevanz zum Programmstand x : nicht programmrelevante Varianten der Hardware V : Projektvariante BB : Programmstand x : nicht datenrelevanter Änderungsindex h : Programmstandersteller |
| ZIF_BACKUP_SG_KENNUNG | string | ZZZ |
| ZIF_BACKUP_PROJEKT | string | PPPxV |
| ZIF_BACKUP_PROGRAMM_STAND | string | BBxh |
| ZIF_BACKUP_STATUS | int | Dateninhalt bei FF noch nicht beschrieben |
| ZIF_BACKUP_BMW_HW | string | VMECUHNB vehicleManufECUHWNumberBackup BMW Hardware* Nummer |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
PHYSIKALISCHE_HW_NR_LESEN
Auslesen der physikalischen Hardwarenummer KWP2000: $1A ReadECUIdentification $87 physicalECUHardwareNumber (PECUHN) oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| PHYSIKALISCHE_HW_NR | string | Physikalische Hardware-Nummer |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
HARDWARE_REFERENZ_LESEN
Auslesen der Hardware Referenz KWP2000: $22 ReadDataByCommonIdentifier $2502 HWREF oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| HARDWARE_REFERENZ | string | Hardware Referenz Format: ZZZPPPx 7 Byte ASCII ZZZ : Hardwarelieferant PPP : Hardwarerelevanz zum Programmstand x : nicht programmrelevante Varianten der Hardware |
| HW_REF_SG_KENNUNG | string | ZZZ |
| HW_REF_PROJEKT | string | PPPx |
| HW_REF_STATUS | int | Dateninhalt bei FF noch nicht beschrieben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
DATEN_REFERENZ_LESEN
Auslesen der Daten Referenz KWP2000: $22 ReadDataByCommonIdentifier $2504 DREF Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| DATEN_REFERENZ | string | Daten Referenz Format: ZZZPPPxVBBxhdxxxx 17 Byte ASCII ZZZ : Hardwarelieferant PPP : Hardwarerelevanz zum Programmstand x : nicht programmrelevante Varianten der Hardware V : Projektvariante BB : Programmstand x : nicht datenrelevanter Änderungsindex h : Programmstandersteller d : Datenstandersteller xxxx : frei aber eindeutig belegt |
| DATEN_REF_SG_KENNUNG | string | ZZZ |
| DATEN_REF_PROJEKT | string | PPPxV |
| DATEN_REF_PROGRAMM_STAND | string | BBxh |
| DATEN_REF_DATENSATZ | string | dxxxx |
| DATEN_REF_STATUS | int | Dateninhalt bei FF noch nicht beschrieben |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_ZEITEN_LESEN
Auslesen der Flash Loeschzeit, Signaturtestzeit, Authentisierberechnungszeit und Resetzeit KWP2000: $22 ReadDataByCommonIdentifier $2501 Zeiten Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FLASH_LOESCHZEIT | int | Flash Loeschzeit in Sekunden |
| FLASH_SIGNATURTESTZEIT | int | Flash Signaturtestzeit in Sekunden |
| FLASH_RESETZEIT | int | Flash Resetzeit in Sekunden |
| FLASH_AUTHENTISIERZEIT | int | Flash Authentisierberechnungszeit in Sekunden |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_BLOCKLAENGE_LESEN
Auslesen des maximalen Blocklaenge beim Flashen KWP2000: $22 ReadDataByCommonIdentifier $2506 MaximaleBlockLaenge Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FLASH_BLOCKLAENGE_GESAMT | unsigned int | Flash Blocklaenge inclusive SID |
| FLASH_BLOCKLAENGE_DATEN | int | Flash Datenlaenge |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
AUTHENTISIERUNG_ZUFALLSZAHL_LESEN
Authentisierung Zufallszahl des SG lesen KWP2000: $31 StartRoutineByLocalIdentifier $07 RequestForAuthentication Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| LEVEL | int | |
| USER_ID | long | optional |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ZUFALLSZAHL | binary | Zufallszahl |
| AUTHENTISIERUNG | string | Authentisierungsart table Authentisierung AUTHG_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
AUTHENTISIERUNG_START
Authentisierung pruefen KWP2000: $31 StartRoutineByLocalIdentifier $08 ReleaseAuthentication Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : (unbenutzt) Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : Authentisierungszeit in Sekunden Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : (unbenutzt) Anzahl Wortdaten (low/high) Byte 17,18,19,20 : (unbenutzt) Wortadresse (low/highbyte, low/highword) Byte 21,.... : Schluesseldaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_PROGRAMMIER_STATUS_LESEN
Programmierstatus des SG lesen KWP2000: $31 StartRoutineByLocalIdentifier $0A CheckProgrammingStatus Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FLASH_PROGRAMMIER_STATUS_TEXT | string | table ProgrammierStatus STATUS_TEXT |
| FLASH_PROGRAMMIER_STATUS | int | ProgrammierStatus 0 - 255 |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_SIGNATUR_PRUEFEN
Flash Signatur pruefen KWP2000: $31 StartRoutineByLocalIdentifier $09 CheckSignature Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BEREICH | string | 'Programm' 'Daten' |
| SIGNATURTESTZEIT | int | Zeit in Sekunden |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERGERAETE_RESET
Steuergeraete reset ausloesen KWP2000: $11 ECUReset $01 PowerOn Modus : Default Nach dem Job muss die Steuergeraete-Resetzeit abgewartet werden. Danach ist das Steuergeraet wieder diagnosefaehig siehe Job FLASH_ZEITEN_LESEN Result FLASH_RESETZEIT
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_LOESCHEN
Flash loeschen Standard Flashjob KWP2000: $31 StartRoutineByLocalIdentifier $02 ClearMemory Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : Loeschzeit in Sekunden (Byteparameter 1) Byte 5,6 : Loeschzeit in Sekunden (WordParameter 1 (low/high)) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : (unbenutzt) Flashdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| FLASH_LOESCHEN_STATUS | int | Loeschstatus 1 = Speicher geloescht 2 = Speicher nicht geloescht 5 = Signaturpruefung PAF nicht durchgefuehrt |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_SCHREIBEN_ADRESSE
Vorbereitung fuer Flash schreiben Standard Flashjob KWP2000: $34 RequestDownload Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : (unbenutzt) Flashdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| FLASH_BLOCKLAENGE_DATEN | int | Flash Datenlaenge ohne Telegramm-Overhead |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_SCHREIBEN
Flash Daten schreiben Standard Flashjob KWP2000: $36 TransferData Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : (unbenutzt) Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : (unbenutzt) Anzahl Wortdaten (low/high) Byte 17,18,19,20 : (unbenutzt) Wortadresse (low/highbyte, low/highword) Byte 21,.... : Flashdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| FLASH_SCHREIBEN_ANZAHL | unsigned int | Anzahl FLASH_SCHREIBEN seit letztem FLASH_SCHREIBEN_ADRESSE |
| FLASH_SCHREIBEN_STATUS | int | Programmierstatus 1 = Programmierung in Ordnung 2 = Programmierung nicht in Ordnung |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FLASH_SCHREIBEN_ENDE
Flashprogrammierung abschliessen Standard Flashjob KWP2000: $37 RequestTransferExit Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : (unbenutzt) Flashdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
AIF_LESEN
Auslesen des Anwender Informations Feldes Standard Flashjob KWP 2000: $23 ReadMemoryByAddress Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| AIF_NUMMER | int | ==0 : aktuelles AIF > 0 : Nummer des zu lesenden AIF default = 0 : aktuelles AIF |
Results
| Name | Type | Comment |
|---|---|---|
| AIF_ADRESSE_HIGH | int | AIF Adresse des AIF, High-Word |
| AIF_ADRESSE_LOW | int | AIF Adresse des AIF, Low-Word |
| AIF_FG_NR | string | Fahrgestellnummer 7-stellig |
| AIF_FG_NR_LANG | string | Fahrgestellnummer 17-stellig falls vorhanden, sonst 7-stellig |
| AIF_DATUM | string | Datum der SG-Programmierung in der Form TT.MM.JJJJ |
| AIF_ZB_NR | string | BMW/Rover Zusammenbaunummer |
| AIF_SW_NR | string | BMW/Rover Datensatznummer - Softwarenummer |
| AIF_BEHOERDEN_NR | string | BMW/Rover Behoerdennummer |
| AIF_HAENDLER_NR | string | Haendlernummer |
| AIF_SERIEN_NR | string | Tester Seriennummer |
| AIF_KM | long | km-Stand bei der Programmierung |
| AIF_PROG_NR | string | Programmstandsnummer |
| AIF_ANZ_FREI | int | Anzahl noch vorhandener AIF-Eintraege |
| AIF_ANZAHL_PROG | int | Anzahl Programmiervorgaenge |
| AIF_ANZ_DATEN | int | Groesse des AIF-Eintrags |
| AIF_GROESSE | int | Groesse des AIF |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG |
AIF_SCHREIBEN
Schreiben des Anwender Informations Feldes Standard Flashjob KWP 2000: $3D WriteMemoryByAddress Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| AIF_FG_NR | string | Fahrgestellnummer 7-stellig oder 17-stellig |
| AIF_DATUM | string | Datum der SG-Programmierung in der Form TT.MM.JJJJ oder TTMMJJ |
| AIF_ZB_NR | string | BMW/Rover Zusammenbaunummer |
| AIF_SW_NR | string | BMW/Rover Datensatznummer - Softwarenummer |
| AIF_BEHOERDEN_NR | string | BMW/Rover Behoerdennummer |
| AIF_HAENDLER_NR | string | Haendlernummer |
| AIF_SERIEN_NR | string | Tester Seriennummer |
| AIF_KM | long | km-Stand bei der Programmierung |
| AIF_PROG_NR | string | Programmstandsnummer |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| AIF_NUMMER | int | Nummer des geschreibenen AIF |
| AIF_DATEN | binary | AIF Hex-Daten |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG AIF lesen |
| _TEL_ANTWORT | binary | Hex-Antwort von SG AIF lesen |
| _TEL_AUFTRAG_2 | binary | Hex-Auftrag an SG AIF schreiben |
| _TEL_ANTWORT_2 | binary | Hex-Antwort von SG AIF schreiben |
FLASH_PARAMETER_LESEN
Gibt die SG-spezifischen Flash-Parameter zurück
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY oder ERROR_DIAG_PROT oder ERROR_SG_AUTHENTISIERUNG |
| SG_ADRESSE | int | Steuergeräteadresse |
| SG_MAXANZAHL_AIF | int | Anzahl der Anwender-Infofelder |
| SG_GROESSE_AIF | int | Grösse des Anwender-Infofeldes |
| SG_ENDEKENNUNG_AIF | int | Offset für letztes Anwender-Infofeld |
| SG_AUTHENTISIERUNG | string | Authentisierungsart table Authentisierung AUTH_TEXT |
| DIAG_PROT_IST | string | Gibt das aktuelle gewählte Protokoll aus table KONZEPT_TABELLE KONZEPT_TEXT |
FLASH_PARAMETER_SETZEN
Setzt die SG-spezifischen Flash-Parameter
Arguments
| Name | Type | Comment |
|---|---|---|
| SG_ADRESSE | int | Steuergeräteadresse |
| SG_MAXANZAHL_AIF | int | Anzahl der Anwender-Infofelder 0x00 Nicht zulässig sonst Anzahl der AIF |
| SG_GROESSE_AIF | int | Grösse des Anwender-Infofeldes 0x12 18 dez kleines AIF 0x33 51 dez grosses AIF 0x40 64 dez grosses AIF ( gilt nur für Power-Pc ) sonst Nicht zulässig |
| SG_ENDEKENNUNG_AIF | int | Offset für letztes Anwender-Infofeld 0xFE Letztes AIF nicht überschreibbar 0x01 Letztes AIF ist überschreibbar sonst Nicht zulässig |
| SG_AUTHENTISIERUNG | string | Authentisierungsart table Authentisierung AUTH_TEXT |
| DIAG_PROT | string | optionaler Parameter Diagnoseprotokoll table KONZEPT_TABELLE KONZEPT_TEXT |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY |
DIAGNOSE_MODE
SG in bestimmten Diagnosemode bringen KWP2000: $10 StartDiagnosticSession Modus : einstellbar mit diesem Job Wenn MODE = "ECUPM" ( ECUProgrammingMode ) muss nach dem Job die Steuergeraete-Resetzeit abgewartet werden. Danach ist das Steuergeraet wieder diagnosefaehig siehe Job FLASH_ZEITEN_LESEN Result FLASH_RESETZEIT
Arguments
| Name | Type | Comment |
|---|---|---|
| MODE | string | gewuenschter Diagnose-Modus table DiagMode MODE MODE_TEXT Defaultwert: DEFAULT (DefaultMode) |
| BAUDRATE | string | optionaler Parameter fuer die gewuenschte Baudrate table BaudRate BAUD |
| SPEZIFISCHE_BAUDRATE_WERT | long | Parameter nur fuer BAUDRATE = 'SB' ( spezifische Baudrate ) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
DIAGNOSE_ENDE
Diagnosemode des SG beenden KWP2000: $20 StopDiagnosticSession Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SLEEP_MODE
SG in Sleep-Mode versetzen KWP2000: $31 StartRoutineByLocalIdentifier a) $0E Time controlled PowerDown oder b) $05 PowerDown $00 all ECU Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| ZEIT | real | a) Zeit nach der das Steuergerät einschläft Bereich : 0.5 bis 20.0 [Sekunden] Auflösung : 0.5 [Sekunden] => zeitgesteuerter Power-Down (0x0E) wird aktiviert b) Default: (Es wird kein Argument übergeben!) => normaler Power-Down (0x05) wird aktiviert |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SLEEP_MODE_FUNKTIONAL
SG in Sleep-Mode versetzen KWP2000: $31 StartRoutineByLocalIdentifier $05 PowerDown Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| FUNKTIONALE_ADRESSE | string | gewuenschte funktionale Adresse table FunktionaleAdresse F_ADR F_ADR_TEXT Defaultwert: ALL ( alle Steuergeraete ) |
| OHNE_POWERMODUL | string | Power Down ohne Powermodul Werte: JA, NEIN table DigitalArgument TEXT Defaultwert: NEIN |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ECU_ADR | string | Steuergeraeteadresse als Hex-String |
| ECU_GROBNAME | string | Grobname des Steuergeraetes table Grobname GROBNAME |
| ID_SG_ADR | long | Steuergeraeteadresse |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
PRUEFCODE_LESEN
Standard Pruefcode lesen fuer Kundendienst KWP2000: $1A ReadECUIdentification KWP2000: $18 ReadDiagnosticTroubleCodesByStatus KWP2000: $17 ReadStatusOfDiagnosticTroubleCodes Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| PRUEFCODE | binary | Pruefcode Daten |
IDENT_IBS
$22 40 21 BMW Nr, Seriennummer, SW/HW Index
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| ID_BMW_NR | string | BMW-Teilenummer 7 stellig |
| SERIENNUMMER | unsigned long | BMW-Seriennummer |
| ZIF_PROGRAMMSTAND | int | Programm referenz |
| ZIF_STATUS | int | Programm Revision |
| HW_REF | int | Hardware Referenz |
STATUS_SYSTEMCHECK_PM_INFO_1
$22 40 22 Bytefeld 1 Batterie Powermanagement lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_RUHESTROMANALYSE_MODE_WERT | int | Modus der Ruhestromanalyse (1 = als Histogramm (nicht Layer), 2 = Bitcodiert für 32 Zyklen (Layer)) |
| STAT_RUHESTROMANALYSE_MODE_TEXT | string | Modus der Ruhestromanalyse (1 = als Histogramm (nicht Layer), 2 = Bitcodiert für 32 Zyklen (Layer)) |
| STAT_BATTERIELADUNG_BILANZ_WERT | real | Differenz LADUNG - ENTLADUNG in Ah 0 - 19088 |
| STAT_BATTERIELADUNG_BILANZ_EINH | string | Einheit |
| STAT_BATTERIELADUNG_GESAMT_WERT | real | Batterie Ladungen in Ah 0 - 19088 |
| STAT_BATTERIELADUNG_GESAMT_EINH | string | Einheit |
| STAT_BATTERIEENTLADUNG_GESAMT_WERT | real | Batterie Ladungen in Ah 0 - 19088 |
| STAT_BATTERIEENTLADUNG_GESAMT_EINH | string | Einheit |
| STAT_ZEIT_IM_LADUNGSBEREICH_0_20_WERT | real | Bereich 0-65535h |
| STAT_ZEIT_IM_LADUNGSBEREICH_0_20_EINH | string | Einheit |
| STAT_ZEIT_IM_LADUNGSBEREICH_20_40_WERT | real | Bereich 0-65535h |
| STAT_ZEIT_IM_LADUNGSBEREICH_20_40_EINH | string | Einheit |
| STAT_ZEIT_IM_LADUNGSBEREICH_40_60_WERT | real | Bereich 0-65535h |
| STAT_ZEIT_IM_LADUNGSBEREICH_40_60_EINH | string | Einheit |
| STAT_ZEIT_IM_LADUNGSBEREICH_60_80_WERT | real | Bereich 0-65535h |
| STAT_ZEIT_IM_LADUNGSBEREICH_60_80_EINH | string | Einheit |
| STAT_ZEIT_IM_LADUNGSBEREICH_80_100_WERT | real | Bereich 0-65535h |
| STAT_ZEIT_IM_LADUNGSBEREICH_80_100_EINH | string | Einheit |
| STAT_ZEIT_IM_TEMPERATURBEREICH_BIS_0_WERT | real | Zeitdauer 0 - 327675 Minuten |
| STAT_ZEIT_IM_TEMPERATURBEREICH_BIS_0_EINH | string | Einheit |
| STAT_ZEIT_IM_TEMPERATURBEREICH_0_20_WERT | real | Zeitdauer 0 - 327675 Minuten |
| STAT_ZEIT_IM_TEMPERATURBEREICH_0_20_EINH | string | Einheit |
| STAT_ZEIT_IM_TEMPERATURBEREICH_20_40_WERT | real | Zeitdauer 0 - 327675 Minuten |
| STAT_ZEIT_IM_TEMPERATURBEREICH_20_40_EINH | string | Einheit |
| STAT_ZEIT_IM_TEMPERATURBEREICH_40_60_WERT | real | Zeitdauer 0 - 327675 Minuten |
| STAT_ZEIT_IM_TEMPERATURBEREICH_40_60_EINH | string | Einheit |
| STAT_ZEIT_IM_TEMPERATURBEREICH_AB_60_WERT | real | Zeitdauer 0 - 327675 Minuten |
| STAT_ZEIT_IM_TEMPERATURBEREICH_AB_60_EINH | string | Einheit |
| STAT_KM_STAND_AKTUELL_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_AKTUELL_EINH | string | Einheit |
| STAT_KM_STAND_VOR_1_TAG_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_VOR_1_TAG_EINH | string | Einheit |
| STAT_KM_STAND_VOR_2_TAG_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_VOR_2_TAG_EINH | string | Einheit |
| STAT_KM_STAND_VOR_3_TAG_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_VOR_3_TAG_EINH | string | Einheit |
| STAT_KM_STAND_VOR_4_TAG_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_VOR_4_TAG_EINH | string | Einheit |
| STAT_KM_STAND_VOR_5_TAG_WERT | real | 0 - 655350 km |
| STAT_KM_STAND_VOR_5_TAG_EINH | string | Einheit |
| STAT_BATTERIETAUSCH_LETZTER_WERT | real | 0 - 655350 km |
| STAT_BATTERIETAUSCH_LETZTER_EINH | string | Einheit |
| STAT_BATTERIETAUSCH_ZWEITLETZTER_WERT | real | 0 - 655350 km |
| STAT_BATTERIETAUSCH_ZWEITLETZTER_EINH | string | Einheit |
| STAT_BATTERIETAUSCH_DRITTLETZTER_WERT | real | 0 - 655350 km |
| STAT_BATTERIETAUSCH_DRITTLETZTER_EINH | string | Einheit |
| STAT_BATTERIETAUSCH_VIERTLETZTER_WERT | real | 0 - 655350 km |
| STAT_BATTERIETAUSCH_VIERTLETZTER_EINH | string | Einheit |
| STAT_BATTERIETAUSCH_FUENFTLETZTER_WERT | real | 0 - 655350 km |
| STAT_BATTERIETAUSCH_FUENFTLETZTER_EINH | string | Einheit |
| STAT_BATTENTLADUNG_GESAMT_BEI_MOTOR_LAEUFT_WERT | real | 0 - 19088 Ah |
| STAT_BATTENTLADUNG_GESAMT_BEI_MOTOR_LAEUFT_EINH | string | Einheit Ah |
| STAT_RUHESTROM_AKTUELL | string | |
| STAT_RUHESTROM_VOR_1_ZYKLUS | string | |
| STAT_RUHESTROM_VOR_2_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_3_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_4_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_5_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_6_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_7_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_8_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_9_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_10_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_11_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_12_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_13_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_14_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_15_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_16_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_17_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_18_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_19_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_20_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_21_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_22_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_23_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_24_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_25_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_26_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_27_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_28_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_29_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_30_ZYKLEN | string | |
| STAT_RUHESTROM_VOR_31_ZYKLEN | string | |
| STAT_IBS_FEHLERZAEHLER_BSD_PARITY_WERT | real | Anzahl 0 - 65535 |
| STAT_IBS_FEHLERZAEHLER_BSD_PARITY_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_WATCHDOG_RESET_WERT | real | Anzahl 0 - 65535 |
| STAT_IBS_FEHLERZAEHLER_WATCHDOG_RESET_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_POWER_ON_RESET_WERT | real | Anzahl 0 - 65535 |
| STAT_IBS_FEHLERZAEHLER_POWER_ON_RESET_EINH | string | Einheit |
| STAT_KTBS_FEHLERZAEHLER_BSD_ERWEITERT_WERT | real | Anzahl 0 - 65535 |
| STAT_KTBS_FEHLERZAEHLER_BSD_ERWEITERT_EINH | string | Einheit |
| STAT_KTIBS_FEHLERZAEHLER_BSD_WERT | real | Anzahl 0 - 65535 |
| STAT_KTIBS_FEHLERZAEHLER_BSD_EINH | string | Einheit |
| STAT_KTIBS_FEHLERZAEHLER_EBSD_CHECKSUMME_WERT | real | Anzahl 0 - 65535 |
| STAT_KTIBS_FEHLERZAEHLER_EBSD_CHECKSUMME_EINH | string | Einheit |
STATUS_SYSTEMCHECK_PM_INFO_2
$22 40 23 Bytefeld 2 Batterie Powermanagement lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| STAT_BATTERIE_KAPAZITAET_WERT | real | Batterie Kapazitaet in Ah 0 - 255 |
| STAT_BATTERIE_KAPAZITAET_EINH | string | Einheit |
| STAT_SOH_WERT | real | Bereich -50% - 49,6% |
| STAT_SOH_EINH | string | Einheit |
| STAT_SOC_FIT_WERT | real | Bereich 0-100% |
| STAT_SOC_FIT_EINH | string | Einheit |
| STAT_TEMP_SAISON_WERT | real | Bereich -128C - 127C |
| STAT_TEMP_SAISON_EINH | string | Einheit C |
| STAT_KALIBRIER_EVENT_CNT_WERT | real | Kalibrieranzahl 0 - 255 |
| STAT_KALIBRIER_EVENT_CNT_EINH | string | Einheit |
| STAT_Q_SOC_AKTUELL_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_AKTUELL_EINH | string | Einheit |
| STAT_Q_SOC_VOR_1_TAG_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_VOR_1_TAG_EINH | string | Einheit |
| STAT_Q_SOC_VOR_2_TAG_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_VOR_2_TAG_EINH | string | Einheit |
| STAT_Q_SOC_VOR_3_TAG_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_VOR_3_TAG_EINH | string | Einheit |
| STAT_Q_SOC_VOR_4_TAG_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_VOR_4_TAG_EINH | string | Einheit |
| STAT_Q_SOC_VOR_5_TAG_WERT | real | Kapazitaet 0 - 1188 Ah |
| STAT_Q_SOC_VOR_5_TAG_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_AKTUELL_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_AKTUELL_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_1_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_1_TAG_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_2_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_2_TAG_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_3_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_3_TAG_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_4_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_4_TAG_EINH | string | Einheit |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_5_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_STARTFAEHIGKEITSGRENZE_VOR_5_TAG_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_AKTUELL_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_AKTUELL_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_VOR_1_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_VOR_1_TAG_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_VOR_2_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_VOR_2_TAG_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_VOR_3_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_VOR_3_TAG_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_VOR_4_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_VOR_4_TAG_EINH | string | Einheit |
| STAT_LADUNGSZUSTAND_VOR_5_TAG_WERT | real | Kapazitaet 0 - 100% |
| STAT_LADUNGSZUSTAND_VOR_5_TAG_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_DOWNLOAD_CHECKSUMME_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_DOWNLOAD_CHECKSUMME_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_EEPROM_DIAGNOSE_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_EEPROM_DIAGNOSE_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_RAM_DIAGNOSE_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_RAM_DIAGNOSE_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_PROM_DIAGNOSE_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_PROM_DIAGNOSE_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_I2C_NAC_DIAGNOSE_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_I2C_NAC_DIAGNOSE_EINH | string | Einheit |
| STAT_IBS_FEHLERZAEHLER_I2C_BUS_COLLISION_WERT | real | Anzahl 0 - 255 |
| STAT_IBS_FEHLERZAEHLER_I2C_BUS_COLLISION_EINH | string | Einheit |
STEUERN_PM_HISTOGRAM_RESET
$30 F5 04 Loeschen von pminfo1 index 23-30
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ADAP_SELEKTIV_LOESCHEN
Löschen von Adaptionen und gelernte Varianten KWP 2000 $31 30 xx xx xx Loeschen der Adaptionswerte
Arguments
| Name | Type | Comment |
|---|---|---|
| AUSWAHLBYTE_1 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_2 | int | Bit=1 löscht Bit=0 behält alten Wert |
| AUSWAHLBYTE_3 | int | Bit=1 löscht Bit=0 behält alten Wert |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STEUERN_BATTERIETAUSCH_REGISTRIEREN
KWP 2000 $31 30 00 10 00 Bit setzen Batterietausch registrieren
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
START_SYSTEMCHECK_PM_MESSEMODE
$31 F6 Systemdiagnose BatterieSensor reset
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STOP_SYSTEMCHECK_PM_MESSEMODE
$32 F6 Systemdiagnose BatterieSensor reset beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
CBS_INFO
Ausgabe der CBS-Version
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| ECU_NAME | string | Steuergeraetename |
| CBS_VERSION_TEXT | string | CBS Version im Klartext |
| CBS_VERSION_HEX | string | CBS Version als Wert |
CBS_DATEN_LESEN
CBS Daten auslesen (fuer CBS-Version 4) KWP2000: $22 ReadDataByCommonIdentifier Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ECU_ADR_WERT | int | Steuergeraeteadresse als Hex-String |
| ECU_ADR_HEX | string | Steuergeraeteadresse als Hex-String |
| ECU_ADR_TEXT | string | Steuergeraeteadresse im Klartext |
| ANZ_CBS | int | Anzahl der CBS - Umfaenge im Steuergeraet |
| ID_FN_CBS_MESS_WERT | int | CBS-Kennung als Zahl |
| ID_FN_CBS_MESS_HEX | string | CBS-Kennung als Hex-String |
| ID_FN_CBS_MESS_TEXT | string | table CbsKennung CBS_K CBS_K_TEXT CBS-Kennung im Klartext |
| RMMI_CBS_WERT | int | Restlaufleistung |
| RMMI_CBS_EINH | string | Information zur Restlaufleistung |
| ST_UN_CBS_WERT | int | Einheit Restlaufleistung als Zahl |
| ST_UN_CBS_HEX | string | Einheit Restlaufleistung als Hex-String |
| ST_UN_CBS_TEXT | string | Einheit Restlaufleistung im Klartext |
| COU_RSTG_CBS_MESS_WERT | int | Servicezaehler |
| COU_RSTG_CBS_MESS_EINH | string | Zaehler |
| AVAI_CBS_WERT | int | Verfuegbarkeit in % |
| AVAI_CBS_EINH | string | % |
| AVAI_CBS_WERT_OEL | int | Verfuegbarkeit OEL in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_CSF | int | Verfuegbarkeit CSF in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_BATT | int | Verfügbarkeit BATT in %, für Prüfablauf Bandende |
| AVAI_CBS_WERT_VTG | int | Verfügbarkeit VTG in %, für Prüfablauf Bandende |
| AVAI_CBS_WERT_FILT | int | Verfuegbarkeit FILT in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_BR_V | int | Verfuegbarkeit BR_V in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_BR_H | int | Verfuegbarkeit BR_H in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_BRFL | int | Verfuegbarkeit BRFL in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_ZKRZ | int | Verfuegbarkeit ZKRZ in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_SIC | int | Verfuegbarkeit SIC in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_KFL | int | Verfuegbarkeit KFL in %, fuer Pruefablauf Bandende |
| AVAI_CBS_WERT_UEB | int | Verfuegbarkeit UEB in %, fuer Pruefablauf Bandende |
| ZIEL_MM_WERT | int | Ziel-Monat |
| ZIEL_MM_EINH | string | Monat |
| ZIEL_YY_WERT | int | Ziel-Jahr |
| ZIEL_YY_EINH | string | Jahr |
| FRC_INTM_WAY_CBS_MESS | int | Prognose Wegintervall |
| FRC_INTM_WAY_CBS_EINH | string | Information zur Prognose Wegintervall |
| FRC_INTM_T_CBS_MESS | int | Prognose Zeitintervall |
| MANIP_CBS | int | Manipulationsbyte |
| MANIP_CBS_TEXT | string | Manipulationsbyte im Klartext |
| Res_Byte | int | Reserve Byte (noch unbenutzt) |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
CBS_RESET
CBS Daten Zuruecksetzen (fuer CBS-Version 4) KWP2000: $2E WriteDataByCommonIdentifier Modus : Default Musterparametersatz fuer Bremsbelagverschleiss Vorder/Hinterachse br_v,100,1,0,0,0,1,0,0 br_h,100,1,0,0,0,1,0,0 jedoch mit "Strich_Punkt" getrennt (nicht mit Komma!)
Arguments
| Name | Type | Comment |
|---|---|---|
| CBS_KENNUNG | string | gewuenschte CBS-Kennung table CbsKennung CBS_K CBS_K_TEXT Werte Kombi-Umfaenge: Brfl, ZKrz, Sic, Kfl, TUV, AU, Ueb Werte externe Umfaenge: Oel, Br_v, Br_h, Filt, CSF, Batt, VTG Defaultwert: 0x00 (ungueltig) |
| CBS_VERFUEGBARKEIT | int | gewuenschte Verfuegbarkeit in Prozent: 0-100 Schalter, keine Aenderung: 255 Defaultwert: 100 |
| CBS_ANZAHL_SERVICE | int | Anzahl der durchgefuehrten Services: 0-30 Schalter, Erhoehung der Anzahl um +1: 31 Defaultwert: 31 |
| CBS_ZIEL_MONAT | int | Ziel-Monat (HU/AU) Januar-Dezember: 1-12 Schalter, keine Aenderung: 255 Defaultwert: 255 |
| CBS_ZIEL_JAHR | int | Ziel-Jahr (HU/AU) 2000-2239: 0-239 Schalter, keine Aenderung: 255 Defaultwert: 255 |
| RMM_CBS_WERT | int | Restlaufleistung in km oder % (siehe Argument Einheit) Schalter, keine Aenderung: 8000h Defaultwert: 8000h |
| ST_UN_CBS_RSTG | int | Einheit Restlaufleistung 0hex -> % 1hex -> km*10 Fhex -> d.c. Defaultwert: Fh |
| FRC_INTM_WAY_CBS_MESS | int | Prognose Wegintervall Umrechnung 1-254*1000km Schalter, setzt auf Defaultwert zurueck: 0h Schalter, keine Aenderung: FFh Defaultwert: FFh |
| FRC_INTM_T_CBS_MESS | int | Prognose Zeitintervall 0-254 Monate Schalter, keine Aenderung: FFh Defaultwert: FFh |
| Res_Byte | int | Reserve Byte (noch unbenutzt) Defaultwert: 00h |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ECU_ADR_WERT | int | Steuergeraeteadresse als Zahl |
| ECU_ADR_HEX | string | Steuergeraeteadresse als Hex-String |
| ECU_ADR_TEXT | string | Steuergeraeteadresse im Klartext |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_CI_LESEN
Codierindex lesen Standard Codierjob KWP2000: $1A ReadECUIdentification $9B Vehicle Manufacturer Coding Index oder alternativ KWP2000: $1A ReadECUIdentification $80 ECUIdentificationDataTable Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ID_COD_INDEX | int | Codier-Index |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT2 | binary | Hex-Antwort von SG |
C_FG_LESEN
Fahrgestellnummer lesen Standard Codierjob KWP2000: $1A ReadECUIdentification $90 Vehicle Identification Number Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FG_NR | string | Fahrgestellnummer 7-stellig |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_FG_SCHREIBEN
Fahrgestellnummer schreiben Standard Codierjob KWP2000: $3B WriteDataByLocalIdentifier $90 Vehicle Identification Number Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_FG_AUFTRAG
Fahrgestellnummer schreiben und ruecklesen Standard Codierjob KWP2000: $3B WriteDataByLocalIdentifier $90 Vehicle Identification Number KWP2000: $1A ReadECUIdentification $90 Vehicle Identification Number Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT2 | binary | Hex-Antwort von SG |
C_AEI_LESEN
Aenderungsindex der Codierdaten lesen Standard Codierjob KWP2000: $22 ReadDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| COD_AE_INDEX | string | Aenderungsindex max. 2-stellig ASCII inkl. Ziffern 'a', 'b', .., 'y', 'z', 'aa', 'ab', .., 'zy', 'zz' |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_AEI_SCHREIBEN
Aenderungsindex der Codierdaten schreiben Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| COD_AE_INDEX | string | Aenderungsindex max. 2-stellig ASCII inkl. Ziffern 'a', 'b', .., 'y', 'z', 'aa', 'ab', .., 'zy', 'zz' |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_AEI_AUFTRAG
Aenderungsindex der Codierdaten schreiben und ruecklesen Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3FFF ChangeIndexOfCodingData KWP2000: $22 ReadDataByCommonIdentifier $3FFF ChangeIndexOfCodingData Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| COD_AE_INDEX | string | Aenderungsindex max. 2-stellig ASCII inkl. Ziffern 'a', 'b', .., 'y', 'z', 'aa', 'ab', .., 'zy', 'zz' |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT2 | binary | Hex-Antwort von SG |
C_C_LESEN
Codierdaten lesen Standard Codierjob KWP2000: $22 ReadDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : (unbenutzt) Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : Codierdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| CODIER_DATEN | binary | Codierdaten |
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_C_SCHREIBEN
Codierdaten schreiben Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : (unbenutzt) Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : Codierdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
C_C_AUFTRAG
Codierdaten schreiben und ruecklesen Standard Codierjob KWP2000: $2E WriteDataByCommonIdentifier $3000 - $3EFF CodingDataSet KWP2000: $22 ReadDataByCommonIdentifier $3000 - $3EFF CodingDataSet Modus : Default
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Als Argument wird ein vorgefuellter Binaerbuffer uebergeben Der Binaerbuffer hat folgenden Aufbau Byte 0 : Datentyp (1:Daten, 2:Maskendaten) Byte 1 : (unbenutzt) Wortbreite (1:Byte, 2:Word, 3:DWord) Byte 2 : (unbenutzt) Byteordnung (0:LSB zuerst, 1 MSB zuerst) Byte 3 : Adressierung (0: freie Adressierung, 1:Blockadressierung) Byte 4 : (unbenutzt) Byteparameter 1 Byte 5,6 : (unbenutzt) WordParameter 1 (low/high) Byte 7,8 : (unbenutzt) WordParameter 2 (low/high) Byte 9,10,11,12 : (unbenutzt) Maske (linksbuendig) Byte 13,14 : Anzahl Bytedaten (low/high) Byte 15,16 : (unbenutzt) Anzahl Wortdaten (low/high) Byte 17,18,19,20 : Wortadresse (low/highbyte, low/highword) Byte 21,.... : Codierdaten Byte 21+Anzahl Daten: ETX (0x03) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| _TEL_AUFTRAG2 | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT2 | binary | Hex-Antwort von SG |
Tables
Index
- SG_DIAGNOSEKONZEPT (3 × 2)
- FORTTEXTE (321 × 2)
- FARTTEXTEINDIVIDUELL (252 × 2)
- FARTTYP (319 × 5)
- FUMWELTTEXTE (465 × 9)
- _CNV_S_10_STATE_EOL__354 (11 × 2)
- _CNV_S_11_EGCP_RANGE_728 (12 × 2)
- _CNV_S_14_TMO3_ERR_C_422 (15 × 2)
- _CNV_S_21_TMO3_ERR_C_423 (22 × 2)
- _CNV_S_3_STATE_RLY__374 (4 × 2)
- _CNV_S_4_EGCP_RANGE_732 (5 × 2)
- _CNV_S_4_EGCP_RANGE_739 (5 × 2)
- _CNV_S_5_LACO_RANGE_765 (6 × 2)
- _CNV_S_6_RANGE_STAT_106 (7 × 2)
- _CNV_S_6_RANGE_STAT_146 (7 × 2)
- _CNV_S_6_RANGE_STAT_305 (7 × 2)
- _CNV_S_7_DEF_BA_467 (8 × 2)
- _CNV_S_7_EGCP_RANGE_710 (8 × 2)
- _CNV_S_7_RANGE_ECU__142 (8 × 2)
- _CNV_S_8_RANGE_STAT_19 (9 × 2)
- _CNV_S_8_RANGE_STAT_326 (9 × 2)
- FUMWELTMATRIX (321 × 5)
- MESSWERTETAB (465 × 12)
- MESSWERTETAB_RK (7 × 12)
- FDETAILSTRUKTUR (7 × 2)
- FARTTEXTEERWEITERT (11 × 3)
- JOBRESULTEXTENDED (1 × 2)
- FARTSTATUSTEXTE (9 × 2)
- FARTERWTEXTE (8 × 2)
- BITS (95 × 4)
- LAMBDASTATUS (7 × 2)
- BETRIEBSSTUNDENSTATUS (4 × 2)
- STATE_GEAR (9 × 2)
- STATE_TQ_CAN_PLAUS (8 × 2)
- TPS_AD_STEP (12 × 2)
- _CNV_S_3_STATE_RLY__396 (4 × 2)
- STATE_CP (9 × 2)
- STATE_SA (13 × 2)
- VAL_MO3_ERR_CODE_MU (22 × 2)
- VAL_MO3_ERR_CODE_MC (14 × 2)
- CONF_SOF_SWI (4 × 2)
- STATE_MSW_CAN (8 × 2)
- EWSSTART (5 × 2)
- EWSEMPFANGSSTATUS (10 × 2)
- STATE_DIAGCPS (7 × 2)
- FUNKTIONSTATUS (7 × 2)
- DIAGNOSE_STATUS (5 × 2)
- DIAGNOSE_DMTL_WERT (26 × 2)
- STATUS_EOL (6 × 2)
- EOL_STATUS (10 × 2)
- SYSTEMCHECK_STATE_CHK_LS (5 × 2)
- STATE_DIAG_SA_LS (10 × 2)
- STATE_VLS_EOL (13 × 2)
- STATUS_REGLER_LSH_DOWN (7 × 2)
- STATUS_REGLER_LSH_UP (8 × 2)
- KONZEPT_TABELLE (4 × 2)
- JOBRESULT (95 × 2)
- LIEFERANTEN (76 × 2)
- FARTTEXTE (14 × 2)
- DIGITALARGUMENT (17 × 2)
- AUTHENTISIERUNG (4 × 2)
- SPEICHERSEGMENT (12 × 3)
- CBSKENNUNG (16 × 3)
- STAT_RUHESTROM (17 × 2)
- _EISYUGD_FASTA (9 × 5)
- _EISYGD_FASTA (5 × 5)
- _KRANN_FASTA (7 × 4)
- _EISYUGD_INPA (145 × 5)
- _EISYGD_INPA (145 × 5)
- _KRANN_INPA (145 × 4)
- _TECU_FASTA (49 × 3)
- DIAGMODE (14 × 3)
- BAUDRATE (7 × 3)
- PROGRAMMIERSTATUS (19 × 2)
- FUNKTIONALEADRESSE (11 × 3)
- MESSWERTEMODE (14 × 3)
- GROBNAME (48 × 2)
SG_DIAGNOSEKONZEPT
Dimensions: 3 rows × 2 columns
| RANG | KONZEPT_TEXT |
|---|---|
| 1 | BMW-FAST |
| 2 | KWP2000* |
| 3 | KWP2000 |
FORTTEXTE
Dimensions: 321 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0x0000 | 0000 FehlerOrt nicht bedatet |
| 0x29CC | 29CC Verbrennungsaussetzer, mehrere Zylinder |
| 0x29CD | 29CD Verbrennungsaussetzer, Zylinder 1 |
| 0x29CE | 29CE Verbrennungsaussetzer, Zylinder 2 |
| 0x29CF | 29CF Verbrennungsaussetzer, Zylinder 3 |
| 0x29D0 | 29D0 Verbrennungsaussetzer, Zylinder 4 |
| 0x29D1 | 29D1 Verbrennungsaussetzer, Zylinder 5 |
| 0x29D2 | 29D2 Verbrennungsaussetzer, Zylinder 6 |
| 0x29D9 | 29D9 Verbrennungsaussetzer bei geringem Tankfüllstand |
| 0x29DA | 29DA Kurbelwellensensor, Segmentadaption |
| 0x29DB | 29DB Laufunruhe, Segmentzeitmessung |
| 0x29DC | 29DC Zylindereinspritzabschaltung |
| 0x29E0 | 29E0 Gemischregelung |
| 0x29E1 | 29E1 Gemischregelung 2 |
| 0x29F4 | 29F4 Katalysatorkonvertierung |
| 0x29F5 | 29F5 Katalysatorkonvertierung 2 |
| 0x29FF | 29FF Sekundärluftsystem |
| 0x2A00 | 2A00 Sekundärluftsystem |
| 0x2A01 | 2A01 Sekundärluftventil, Mechanik |
| 0x2A02 | 2A02 Sekundärluftventil, Ansteuerung |
| 0x2A03 | 2A03 Sekundärluftpumpenrelais, Ansteuerung |
| 0x2A04 | 2A04 Sekundärluftmassenmesser, Plausibilität |
| 0x2A07 | 2A07 Sekundärluftventil, Mechanik |
| 0x2A12 | 2A12 DMTL-Magnetventil, Ansteuerung |
| 0x2A13 | 2A13 DMTL-Leckdiagnosepumpe, Ansteuerung |
| 0x2A15 | 2A15 DMTL, Feinleck |
| 0x2A16 | 2A16 DMTL, Feinstleck |
| 0x2A17 | 2A17 DMTL, Systemfehler |
| 0x2A18 | 2A18 DMTL, Heizung: Ansteuerung |
| 0x2A19 | 2A19 Tankentlüftungsventil, Ansteuerung |
| 0x2A1A | 2A1A Tankentlüftungssystem, Funktion |
| 0x2A1B | 2A1B Tankdeckel |
| 0x2A1C | 2A1C Tankfüllstand, Plausibilität |
| 0x2A2E | 2A2E Gemischregelung |
| 0x2A2F | 2A2F Gemischregelung 2 |
| 0x2A30 | 2A30 Valvetronic, Exzenterwellensensor: Spannungsversorgung |
| 0x2A31 | 2A31 Valvetronic, Exzenterwellensensor: Führung |
| 0x2A32 | 2A32 Valvetronic, Exzenterwellensensor: Referenz |
| 0x2A33 | 2A33 Valvetronic, Exzenterwellensensor: Führung |
| 0x2A34 | 2A34 Valvetronic, Exzenterwellensensor: Referenz |
| 0x2A35 | 2A35 Valvetronic, Exzenterwellensensor: Führung |
| 0x2A36 | 2A36 Valvetronic, Exzenterwellensensor: Referenz |
| 0x2A37 | 2A37 Valvetronic, Exzenterwellensensor: Plausibilität |
| 0x2A38 | 2A38 Valvetronic, Überwachung Schwergängigkeit |
| 0x2A39 | 2A39 Valvetronic, Verstellbereich |
| 0x2A3A | 2A3A Valvetronic, interner Fehler |
| 0x2A3B | 2A3B Valvetronic, Stellmotor: Drehrichtung |
| 0x2A3C | 2A3C Valvetronic-Relais, Ansteuerung |
| 0x2A3D | 2A3D Valvetronic, Stellmotor: Ansteuerung |
| 0x2A3E | 2A3E Valvetronic, Stellmotor: Überlastung |
| 0x2A3F | 2A3F Valvetronic, Stellmotor: Spannungsversorgung |
| 0x2A40 | 2A40 Valvetronic, thermischer Überlastschutz |
| 0x2A41 | 2A41 Valvetronic, elektrischer Überlastschutz |
| 0x2A42 | 2A42 Valvetronic, Position bei Neustart: Plausibilität |
| 0x2A43 | 2A43 Valvetronic, thermischer Überlastschutz: Warnschwelle |
| 0x2A44 | 2A44 Valvetronic, Leistungsbegrenzung |
| 0x2A45 | 2A45 Valvetronic, Stellmotor: Plausibilität |
| 0x2A46 | 2A46 Valvetronic, Adaption |
| 0x2A47 | 2A47 Valvetronic, Exzenterwellensensor: Plausibilität |
| 0x2A80 | 2A80 Einlass-VANOS, Ansteuerung |
| 0x2A82 | 2A82 Einlass-VANOS |
| 0x2A85 | 2A85 Auslass-VANOS, Ansteuerung |
| 0x2A87 | 2A87 Auslass-VANOS, Mechanik |
| 0x2A94 | 2A94 Kurbelwellensensor, Signal |
| 0x2A95 | 2A95 Kurbelwellensensor, Synchronisation |
| 0x2A96 | 2A96 Kurbelwellensensor, Zahnfehler |
| 0x2A97 | 2A97 Kurbelwellensensor, Lückenfehler |
| 0x2A98 | 2A98 Kurbelwelle - Einlassnockenwelle, Korrelation |
| 0x2A99 | 2A99 Kurbelwelle - Auslassnockenwelle, Korrelation |
| 0x2A9A | 2A9A Nockenwellensensor Einlass, Signal |
| 0x2A9B | 2A9B Nockenwellensensor Auslass, Signal |
| 0x2A9E | 2A9E Nockenwellensensor Einlass, Synchonisation |
| 0x2A9F | 2A9F Nockenwellensensor Auslass, Synchronisation |
| 0x2AA0 | 2AA0 Nockenwellensensor Einlass, Signal |
| 0x2AA1 | 2AA1 Nockenwellensensor Auslass, Signal |
| 0x2AA2 | 2AA2 Nockenwellensensor Einlass, Lückenverlust |
| 0x2AA3 | 2AA3 Nockenwellengeber Auslass, Lückenverlust |
| 0x2AA8 | 2AA8 Variable Sauganlage Stellmotor: Ansteuerung |
| 0x2AA9 | 2AA9 Variable Sauganlage Stellmotor 2: Ansteuerung |
| 0x2AAA | 2AAA Variable Sauganlage, Plausibilität |
| 0x2AAB | 2AAB Variable Sauganlage, Eigendiagnose |
| 0x2AAC | 2AAC Variable Sauganlage 2, Eigendiagnose |
| 0x2AAD | 2AAD Kraftstoffpumpe, Notabschaltung |
| 0x2AAE | 2AAE Kraftstoffpumpe |
| 0x2AB2 | 2AB2 Steuergerät, interner Fehler: RAM |
| 0x2AB3 | 2AB3 Steuergerät, interner Fehler: Checksumme |
| 0x2AB4 | 2AB4 Steuergerät, interner Fehler: RAM-Checksumme |
| 0x2AB5 | 2AB5 Steuergerät, interner Fehler: Klopfsensorbaustein |
| 0x2AB6 | 2AB6 Steuergerät, interner Fehler: Mehrfachendstufenbaustein |
| 0x2AC1 | 2AC1 Soundklappe, Ansteuerung |
| 0x2AC6 | 2AC6 Taster Fahrdynamik-Control (SPORT-Taste), Signal |
| 0x2ACB | 2ACB DME-Hauptrelais, Ansteuerung |
| 0x2ACC | 2ACC DME-Hauptrelais, Schaltverzögerung |
| 0x2AD0 | 2AD0 Getriebesteuerung |
| 0x2ADF | 2ADF Leerlaufregelung, Drehzahl |
| 0x2AE0 | 2AE0 Leerlaufregelung bei Kaltstart, Plausibilität |
| 0x2AE1 | 2AE1 Leistungsbedarf im Leerlauf zu hoch |
| 0x2AE4 | 2AE4 Motorentlüftungs-Heizungsrelais, Ansteuerung |
| 0x2C24 | 2C24 Lambdasonden vor Katalysator, vertauscht |
| 0x2C27 | 2C27 Lambdasonde vor Katalysator, Systemcheck |
| 0x2C28 | 2C28 Lambdasonde vor Katalysator 2, Systemcheck |
| 0x2C2B | 2C2B Lambdasonde vor Katalysator, Systemcheck |
| 0x2C2C | 2C2C Lambdasonde vor Katalysator 2, Systemcheck |
| 0x2C2D | 2C2D Lambdasonde vor Katalysator, Schubprüfung |
| 0x2C2E | 2C2E Lambdasonde vor Katalysator 2, Schubprüfung |
| 0x2C31 | 2C31 Lambdasonde vor Katalysator, Trimmregelung |
| 0x2C32 | 2C32 Lambdasonde vor Katalysator 2, Trimmregelung |
| 0x2C37 | 2C37 Lambdasonde vor Katalysator, Heizereinkopplung |
| 0x2C38 | 2C38 Lambdasonde vor Katalysator 2, Heizereinkopplung |
| 0x2C39 | 2C39 Lambdasonde vor Katalysator, Dynamik |
| 0x2C3A | 2C3A Lambdasonde vor Katalysator 2, Dynamik |
| 0x2C3B | 2C3B Lambdasonde vor Katalysator, nicht angesteckt |
| 0x2C3C | 2C3C Lambdasonde vor Katalysator 2, nicht angesteckt |
| 0x2C3D | 2C3D Lambdasonde vor Katalysator, Leitungsfehler |
| 0x2C3E | 2C3E Lambdasonde vor Katalysator 2, Leitungsfehler |
| 0x2C3F | 2C3F Steuergerät, interner Fehler: Lambdasonde, Auswertebaustein |
| 0x2C40 | 2C40 Steuergerät, interner Fehler: Lambdasonde 2, Auswertebaustein |
| 0x2C41 | 2C41 Steuergerät, interner Fehler: Lambdasonde |
| 0x2C42 | 2C42 Steuergerät, interner Fehler: Lambdasonde 2 |
| 0x2C6A | 2C6A Lambdasonden nach Katalysator, vertauscht |
| 0x2C6B | 2C6B Lambdasonde nach Katalysator, Systemcheck |
| 0x2C6C | 2C6C Lambdasonde nach Katalysator 2, Systemcheck |
| 0x2C6D | 2C6D Lambdasonde nach Katalysator, Alterung |
| 0x2C6E | 2C6E Lambdasonde nach Katalysator 2, Alterung |
| 0x2C6F | 2C6F Lambdasonde nach Katalysator, Signal bei Volllast |
| 0x2C70 | 2C70 Lambdasonde nach Katalysator 2, Signal bei Volllast |
| 0x2C73 | 2C73 Lambdasonde nach Katalysator, Signal |
| 0x2C74 | 2C74 Lambdasonde nach Katalysator 2, Signal |
| 0x2C75 | 2C75 Lambdasonde nach Katalysator, Signal |
| 0x2C76 | 2C76 Lambdasonde nach Katalysator 2, Signal |
| 0x2C77 | 2C77 Lambdasonde nach Katalysator, Signal |
| 0x2C78 | 2C78 Lambdasonde nach Katalysator 2, Signal |
| 0x2C79 | 2C79 Lambdasonde nach Katalysator, Signal |
| 0x2C7A | 2C7A Lambdasonde nach Katalysator 2, Signal |
| 0x2C7B | 2C7B Lambdasonde nach Katalysator, Signal |
| 0x2C7C | 2C7C Lambdasonde nach Katalysator 2, Signal |
| 0x2C7E | 2C7E Lambdasonde nach Katalysator, Trimmregelung |
| 0x2C7F | 2C7F Lambdasonde nach Katalysator 2, Trimmregelung |
| 0x2C9C | 2C9C Lambdasondenbeheizung vor Katalysator, Ansteuerung |
| 0x2C9D | 2C9D Lambdasondenbeheizung vor Katalysator 2, Ansteuerung |
| 0x2C9E | 2C9E Lambdasondenbeheizung nach Katalysator, Ansteuerung |
| 0x2C9F | 2C9F Lambdasondenbeheizung nach Katalysator 2, Ansteuerung |
| 0x2CA6 | 2CA6 Lambdasondenbeheizung vor Katalysator, Funktion |
| 0x2CA7 | 2CA7 Lambdasondenbeheizung vor Katalysator 2, Funktion |
| 0x2CA8 | 2CA8 Lambdasondenbeheizung nach Katalysator, Funktion |
| 0x2CA9 | 2CA9 Lambdasondenbeheizung nach Katalysator 2, Funktion |
| 0x2CEC | 2CEC Drosselklappensteller, klemmt kurzzeitig |
| 0x2CED | 2CED Drosselklappensteller, klemmt dauerhaft |
| 0x2CEE | 2CEE Drosselklappensteller, schwergängig |
| 0x2CEF | 2CEF Drosselklappensteller, Ansteuerung |
| 0x2CF6 | 2CF6 Drosselklappenpotenziometer 1, Plausibilität zu Luftmasse |
| 0x2CF7 | 2CF7 Drosselklappenpotenziometer 2, Plausibilität zu Luftmasse |
| 0x2CF9 | 2CF9 Drosselklappenpotenziometer 1 |
| 0x2CFA | 2CFA Drosselklappenpotenziometer 2 |
| 0x2CFB | 2CFB Drosselklappen-Adaptionswert |
| 0x2CFC | 2CFC Drosselklappe, Startprüfung |
| 0x2CFD | 2CFD Drosselklappen-Adaptionswert fehlt |
| 0x2CFE | 2CFE Drosselklappe, kontinuierliche Adaption |
| 0x2D06 | 2D06 Luftmassensystem |
| 0x2D07 | 2D07 Drosselklappe |
| 0x2D09 | 2D09 Drosselklappe |
| 0x2D0F | 2D0F Luftmassenmesser, Signal |
| 0x2D1B | 2D1B Fahrpedalmodul, Pedalwertgeber Signal 1 |
| 0x2D1C | 2D1C Fahrpedalmodul, Pedalwertgeber Signal 2 |
| 0x2D1D | 2D1D Fahrpedalmodul, Pedalwertgeber 1, Spannungsversorgung |
| 0x2D1E | 2D1E Fahrpedalmodul, Pedalwertgeber 2, Spannungsversorgung |
| 0x2D1F | 2D1F Fahrpedalmodul, Pedalwertgeber Potentiometer, Signal |
| 0x2D20 | 2D20 Fahrpedalmodul, Pedalwertgeber, Plausibilität zwischen Signal 1 und Signal 2 |
| 0x2D28 | 2D28 Differenzdrucksensor, Saugrohr: Signal |
| 0x2D29 | 2D29 Differenzdrucksensor, Saugrohr: Plausibilität |
| 0x2D2A | 2D2A Differenzdrucksensor, Saugrohr: Adaption |
| 0x2D50 | 2D50 DME, interner Fehler: Überwachung Fahrgeschwindigkeitsregelung |
| 0x2D51 | 2D51 Überwachung Luftpfad |
| 0x2D52 | 2D52 DME, interner Fehler: Überwachung Motordrehzahl |
| 0x2D53 | 2D53 DME, interner Fehler: Überwachung Drehzahlbegrenzung |
| 0x2D54 | 2D54 DME, interner Fehler: Überwachung Drehzahlbegrenzung Reset |
| 0x2D55 | 2D55 DME, interner Fehler: Überwachung Fahrpedalmodul |
| 0x2D56 | 2D56 DME, interner Fehler: Überwachung Leerlaufregelung |
| 0x2D57 | 2D57 DME, interner Fehler: Überwachung externe Momentenanforderung |
| 0x2D58 | 2D58 DME, interner Fehler: Überwachung Sollmoment |
| 0x2D59 | 2D59 DME, interner Fehler: Überwachung Istmoment |
| 0x2D5A | 2D5A Überwachung Motordrehmoment-Begrenzung |
| 0x2D5B | 2D5B DME, interner Fehler: Momentenüberwachung |
| 0x2D5C | 2D5C DME, interner Fehler: Überwachung Hardware |
| 0x2D5F | 2D5F Reset |
| 0x2DB5 | 2DB5 Fahrgeschwindigkeitsregelung, Signal |
| 0x2DB6 | 2DB6 Fahrgeschwindigkeitsregelung,Schalter Multifunktionslenkrad |
| 0x2DB7 | 2DB7 Fahrgeschwindigkeitsregelung, Zeitlimit der Datenübertragung erreicht |
| 0x2DBE | 2DBE Aktive Geschwindigkeitsregelung, gesperrt für Fahrzyklus |
| 0x2DC0 | 2DC0 Längsdynamikmanagement |
| 0x2DC3 | 2DC3 Überwachung Klemme 15 |
| 0x2DC5 | 2DC5 Momentenanforderung über CAN, Plausibilität |
| 0x2DC6 | 2DC6 Tankfüllstandswert, Plausibilität |
| 0x2DC8 | 2DC8 Botschaft vom EGS fehlt, EGS 1 |
| 0x2DC9 | 2DC9 Botschaft vom EGS fehlt, EGS 2 |
| 0x2DCC | 2DCC Botschaft vom ASC/DSC fehlt, ASC 1 |
| 0x2DCD | 2DCD Botschaft vom ASC/DSC fehlt, ASC 3 |
| 0x2DCE | 2DCE Botschaft vom ASC/DSC fehlt, ASC 4 |
| 0x2DD0 | 2DD0 Botschaft von der Instrumentenkombination fehlt, I-Kombi 2 |
| 0x2DD1 | 2DD1 Botschaft von der Instrumentenkombination fehlt, I-Kombi 3 |
| 0x2DD2 | 2DD2 Botschaft vom LWS-Steuergerät fehlt, LWS |
| 0x2DD3 | 2DD3 Botschaft vom SMG-Steuergerät fehlt, SMG 1 |
| 0x2DD4 | 2DD4 Botschaft (TxU) fehlt |
| 0x2DD5 | 2DD5 Botschaft von der EKP fehlt |
| 0x2DE0 | 2DE0 Botschaft von der elektrischen Kraftstoffpumpe fehlt, EKP |
| 0x2DE1 | 2DE1 Tankfüllstandssensor, links |
| 0x2DE2 | 2DE2 Tankfüllstandssensor, rechts |
| 0x2DE3 | 2DE3 Botschaft von der Instrumentenkombination fehlt, I-Kombi 7 |
| 0x2DEB | 2DEB Powermanagement, Bordnetzüberwachung |
| 0x2DEC | 2DEC Powermanagement, Batterieüberwachung |
| 0x2DED | 2DED Powermanagement, Ruhestromüberwachung |
| 0x2E18 | 2E18 Zündung, Zylinder 1 |
| 0x2E19 | 2E19 Zündung, Zylinder 2 |
| 0x2E1A | 2E1A Zündung, Zylinder 3 |
| 0x2E1B | 2E1B Zündung, Zylinder 4 |
| 0x2E1C | 2E1C Zündung, Zylinder 5 |
| 0x2E1D | 2E1D Zündung, Zylinder 6 |
| 0x2E24 | 2E24 Zündspule Zylinder 1 |
| 0x2E25 | 2E25 Zündspule Zylinder 2 |
| 0x2E26 | 2E26 Zündspule Zylinder 3 |
| 0x2E27 | 2E27 Zündspule Zylinder 4 |
| 0x2E28 | 2E28 Zündspule Zylinder 5 |
| 0x2E29 | 2E29 Zündspule Zylinder 6 |
| 0x2E30 | 2E30 Einspritzventil Zylinder 1, Ansteuerung |
| 0x2E31 | 2E31 Einspritzventil Zylinder 2, Ansteuerung |
| 0x2E32 | 2E32 Einspritzventil Zylinder 3, Ansteuerung |
| 0x2E33 | 2E33 Einspritzventil Zylinder 4, Ansteuerung |
| 0x2E34 | 2E34 Einspritzventil Zylinder 5, Ansteuerung |
| 0x2E35 | 2E35 Einspritzventil Zylinder 6, Ansteuerung |
| 0x2E68 | 2E68 Klopfsensorsignal 1 |
| 0x2E69 | 2E69 Klopfsensorsignal 2 |
| 0x2E77 | 2E77 Zündung, Spannungsversorgung |
| 0x2E7C | 2E7C Bitserielle Datenschnittstelle, Signal |
| 0x2E81 | 2E81 Elektrische Wasserpumpe, Drehzahlabweichung |
| 0x2E82 | 2E82 Elektrische Wasserpumpe, Abschaltung |
| 0x2E83 | 2E83 Elektrische Wasserpumpe, leistungsreduzierter Betrieb |
| 0x2E84 | 2E84 Elektrische Wasserpumpe, Kommunikation |
| 0x2E85 | 2E85 Elektrische Wasserpumpe, Kommunikation |
| 0x2E8B | 2E8B Intelligenter Batteriesensor, Signal |
| 0x2E8C | 2E8C Intelligenter Batteriesensor, Funktion |
| 0x2E8D | 2E8D Intelligenter Batteriesensor, Signalübertragung |
| 0x2E8E | 2E8E Intelligenter Batteriesensor, Kommunikation |
| 0x2E96 | 2E96 Generator, Untererregung |
| 0x2E97 | 2E97 Generator |
| 0x2E98 | 2E98 Generator, Kommunikation |
| 0x2E9F | 2E9F Ölzustandssensor |
| 0x2EA1 | 2EA1 Ölzustandssensor, Kommunikation |
| 0x2EE0 | 2EE0 Kühlmitteltemperatursensor, Signal |
| 0x2EE1 | 2EE1 Kühlmitteltemperatursensor, Plausibilität |
| 0x2EE2 | 2EE2 Kühlmitteltemperatursensor, Plausibilität, Signal konstant |
| 0x2EE3 | 2EE3 Kühlmitteltemperatursensor, Plausibilität, Gradient |
| 0x2EEA | 2EEA Temperatursensor Kühleraustritt, Signal |
| 0x2EEB | 2EEB Temperatursensor Kühleraustritt, Plausibilität, Gradient |
| 0x2EEC | 2EEC Temperatursensor Kühleraustritt, Plausibilität |
| 0x2EF4 | 2EF4 Kennfeldthermostat, Mechanik |
| 0x2EF5 | 2EF5 Kennfeldthermostat, Ansteuerung |
| 0x2EFE | 2EFE Elektrolüfter, Ansteuerung |
| 0x2EFF | 2EFF Elektrolüfter, Eigendiagnose |
| 0x2F08 | 2F08 Ansauglufttemperatursensor, Signal |
| 0x2F09 | 2F09 Ansauglufttemperatursensor, Plausibilität |
| 0x2F0D | 2F0D Kühlerjalousie, Ansteuerung, (GLF) |
| 0x2F0F | 2F0F Kühlerjalousie, Eigendiagnose (ALKS) |
| 0x2F12 | 2F12 Klimakompressor, Ansteuerung |
| 0x2F44 | 2F44 EWS Manipulationsschutz |
| 0x2F45 | 2F45 Schnittstelle EWS-DME |
| 0x2F46 | 2F46 EWS Wechselcode-Abspeicherng |
| 0x2F47 | 2F47 EWS Irreversibler Steuergerätefehler |
| 0x2F4E | 2F4E Fahrzeuggeschwindigkeit, Signal |
| 0x2F4F | 2F4F Fahrzeuggeschwindigkeit, Plausibilität |
| 0x2F58 | 2F58 Startautomatik, Ansteuerung |
| 0x2F63 | 2F63 Bremslichtschalter, Plausibilität |
| 0x2F64 | 2F64 Bremslichttestschalter, Plausibilität |
| 0x2F67 | 2F67 Kupplungsschalter, Signal |
| 0x2F6C | 2F6C Abgasklappe, Ansteuerung |
| 0x2F71 | 2F71 E-Box-Lüfter, Ansteuerung |
| 0x2F76 | 2F76 Umgebungsdrucksensor, Signal |
| 0x2F77 | 2F77 Umgebungsdrucksensor, Plausibilität |
| 0x2F7B | 2F7B Öldruckschalter, Plausibilität |
| 0x2F80 | 2F80 Motorabstellzeit, Plausibilität |
| 0x2F85 | 2F85 DME, interner Fehler: Innentemperatursensor, Signal |
| 0x2F8F | 2F8F Fahrpedalmodul und Bremspedal, Plausibilität |
| 0x2F94 | 2F94 Kraftstoffpumpenrelais, Ansteuerung |
| 0x2F99 | 2F99 Umgebungstemperatursensor, Plausibilität |
| 0x2F9A | 2F9A Umgebungstemperatursensor, Kommunikation |
| 0x2F9E | 2F9E Thermischer Ölniveausensor |
| 0x2FA3 | 2FA3 Codierung fehlt |
| 0x2FA4 | 2FA4 Falscher Datensatz |
| 0x2FC6 | 2FC6 Energiesparmodus aktiv |
| 0xCD87 | CD87 PT-CAN Kommunikationsfehler |
| 0xCD8B | CD8B Local-CAN Kommunikationsfehler |
| 0xCD8F | CD8F PT-CAN Kommunikationsfehler |
| 0xCD94 | CD94 Botschaft (Außentemperatur/Relativzeit, 310) |
| 0xCD95 | CD95 Botschaft (Bedienung Tempomat/ACC, 194) |
| 0xCD96 | CD96 Botschaft (Drehmomentanforderung ACC, B7) |
| 0xCD97 | CD97 Botschaft (Drehmomentanforderung AFS, B9) |
| 0xCD98 | CD98 Botschaft (Drehmomentanforderung DSC, B6) |
| 0xCD99 | CD99 Botschaft (Drehmomentanforderung EGS, B5) |
| 0xCD9A | CD9A Botschaft (Drehmomentanforderung SMG, BD) |
| 0xCD9B | CD9B Botschaft (Fahrzeugmodus, 315) |
| 0xCD9C | CD9C Botschaft (Geschwindigkeit, 1A0) |
| 0xCD9D | CD9D Botschaft (Getriebedaten, BA) |
| 0xCD9E | CD9E Botschaft (Getriebedaten2, 1A2) |
| 0xCD9F | CD9F Botschaft (Kilometerstand/Reichweite, 330) |
| 0xCDA0 | CDA0 Botschaft (Klemmenstatus, 130) |
| 0xCDA1 | CDA1 Botschaft (Lenkradwinkel, C4) |
| 0xCDA2 | CDA2 Botschaft (Powermanagement Batteriespannung, 3B4) |
| 0xCDA3 | CDA3 Botschaft (Powermanagement Ladespannung, 334) |
| 0xCDA4 | CDA4 Botschaft (Status ARS-Modul, 1AC) |
| 0xCDA5 | CDA5 Botschaft (Status DSC, 19E) |
| 0xCDA6 | CDA6 Botschaft (Status Elektrische Kraftstoffpumpe, 335) |
| 0xCDA7 | CDA7 Botschaft (Status Rückwärtsgang, 3B0) |
| 0xCDA8 | CDA8 Botschaft (Status Kombi, 1B4) |
| 0xCDA9 | CDA9 Botschaft (Wärmestrom/Lastmoment Klima, 1B5) |
| 0xCDAA | CDAA Botschaft (Status Crashabschaltung EKP, 135) |
| 0xCDAB | CDAB Botschaft (Lampenzustand, 21A) |
| 0xCDAC | CDAC Botschaft (Status Wasserventil, 3B5) |
| 0xCDAD | CDAD Botschaft (Anforderung Radmoment Antriebstrang, BF) |
| 0xCDAE | CDAE Botschaft (Uhrzeit/Datum, 2F8) |
| 0xCDAF | CDAF Botschaft (Status Anhänger, 2E4) |
| 0xCDB0 | CDB0 Botschaft (Anzeige Getriebedaten) |
| 0xFFFF | unbekannter Fehlerort |
FARTTEXTEINDIVIDUELL
Dimensions: 252 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x0000 | kein passendes Fehlersymptom |
| 0x0001 | Signal oder Wert oberhalb Schwelle |
| 0x0002 | Signal oder Wert unterhalb Schwelle |
| 0x0003 | Tankfüllstand zu gering |
| 0x0004 | kein Signal oder Wert |
| 0x0005 | 1. Startwert im Flash zerstört. 2- aus 3-Auswahl fehlgeschlagen oder 2. Fehlerrückmeldung: Startwertprogrammierroutine |
| 0x0006 | ALIVE-Fehler |
| 0x0007 | Abbruch wegen Stromschwankungen bei Feinleckprüfung |
| 0x0008 | unplausibles Signal oder Wert |
| 0x0009 | Abgas nach Katalysator zu fett |
| 0x000A | Abgas nach Katalysator zu mager |
| 0x000B | Abgasschädigend |
| 0x000C | Abgasschädigend nach Startvorgang |
| 0x000D | Aktualisierungszähler inkrementiert nicht (Alive-Zähler) |
| 0x000E | Anforderung AMT unplausibel |
| 0x000F | Anforderung EGS unplausibel |
| 0x0010 | Anforderung I-Anteil unplausibel |
| 0x0011 | Anforderung MSR unplausibel |
| 0x0012 | Anforderung PD-Anteil unplausibel |
| 0x0013 | Ansteuerung fehlerhaft |
| 0x0014 | Applikationssoftware |
| 0x0015 | Arbeitstemperatur Sonde nicht erreicht |
| 0x0016 | BSD-Fehler |
| 0x0017 | Betriebsbereitschaft Sonde zu spät erreicht |
| 0x0018 | Bootsoftware |
| 0x0019 | CAN Baustein im Zustand passiv |
| 0x001A | CAN Bus off |
| 0x001B | CAN Timeout |
| 0x001C | CAN Wert unplausibel |
| 0x001D | CAS-Fehler |
| 0x001E | Checksumme |
| 0x001F | Codierdaten im EEPROM fehlerhaft |
| 0x0020 | DISA 1: Schalter defekt |
| 0x0021 | DISA 2: Schalter defekt |
| 0x0022 | Datenbereich |
| 0x0023 | Differenz Stop-/Startposition |
| 0x0024 | Doppelfehler |
| 0x0025 | Drehrichtungserkennung |
| 0x0026 | Drehzahl außerhalb der Toleranz |
| 0x0027 | Drehzahl zu hoch |
| 0x0028 | Drehzahl zu niedrig |
| 0x0029 | Drosselklappenstellung unplausibel |
| 0x002A | EBSD-Fehler |
| 0x002B | Eigendiagnose / Mechanischer- oder Hardwaredefekt |
| 0x002C | Elektrisch |
| 0x002D | Empfangsfehler des EWS-Telegramms (Start-, Stopbit- oder Framefehler) |
| 0x002E | Exzenterwinkel fährt nicht auf Vollhubposition |
| 0x002F | Falsche EWS-Telegramme empfangen. Die Fangbereichsrechnung ist für mindestens 5 Telegrammauswertungen fehlgeschlagen. |
| 0x0030 | Federtest |
| 0x0031 | Federtest und Notluftprüfung verfehlt |
| 0x0032 | Fehler Ablage |
| 0x0033 | Fehler beim Programmieren oder rücksetzen des Startwertes |
| 0x0034 | Fehlerverwaltung Getriebe |
| 0x0035 | Funktionstest |
| 0x0036 | Funktionstest Bandende |
| 0x0037 | Füllstandssignalwert zum Verbrauchswert unplausibel |
| 0x0038 | Gemisch zu fett |
| 0x0039 | Gemisch zu mager |
| 0x003A | Gleichlauffehler |
| 0x003B | Grobe Undichtigkeit zwischen Sekundärluftpumpe und -Ventil |
| 0x003C | Hardware |
| 0x003D | Heiztakteinkopplung auf Signal |
| 0x003E | IST Wert zu hoch |
| 0x003F | IST Wert zu niedrig |
| 0x0040 | Initialisierungsfehler |
| 0x0041 | Innenwiderstand des Signalkreises zu hochohmig |
| 0x0042 | Klemmt offen |
| 0x0043 | Kommunikationsfehler |
| 0x0044 | Kurzschluss der Motorleitungen |
| 0x0045 | Kurzschluss nach Minus |
| 0x0046 | Kurzschluss nach Minus oder Leitungsunterbrechung |
| 0x0047 | Kurzschluss nach Plus |
| 0x0048 | Kurzschluss nach Plus oder Leitungsunterbrechung |
| 0x0049 | Lagereglerüberwachung |
| 0x004A | Leckage grösser 0,5 mm |
| 0x004B | Leckage grösser 1,0 mm |
| 0x004C | Leitungsunterbrechung |
| 0x004D | Leitungsunterbrechung |
| 0x004E | Lesefehler im EEPROM: Wechselcode Ablage |
| 0x004F | Luftzufuhr nicht korrekt |
| 0x0050 | Mechanisch |
| 0x0051 | Mechanischer- oder Hardwaredefekt |
| 0x0052 | Mehr als 3 Parity-Fehler erkannt |
| 0x0053 | Messwert HFM zu hoch |
| 0x0054 | Messwert HFM zu niedrig |
| 0x0055 | Momentenanforderung vom ACC/DCC unplausibel |
| 0x0056 | Momentenanforderung vom LDM trotzt Bremssignal |
| 0x0057 | Momentenanforderung vom LDM unplausibel |
| 0x0058 | Momentenanforderung vom Tempomat trotz Bremssignal |
| 0x0059 | Motor mechanisch zu laut |
| 0x005A | Motor mechanisch zu laut |
| 0x005B | Motor mechanisch zu leise |
| 0x005C | Neuadaption erforderlich |
| 0x005D | Niveaumessung |
| 0x005E | Notabschaltung |
| 0x005F | Notlauf |
| 0x0060 | Notluftprüfung |
| 0x0061 | Notluftpunkt nicht adaptiert |
| 0x0062 | Offset Maximum überschritten |
| 0x0063 | Parity-Fehler |
| 0x0064 | Pedalwert zu Bremspedal |
| 0x0065 | Permittivitätsmessung |
| 0x0066 | Plausibilitaet zwischen Poti 1 und 2 verletzt |
| 0x0067 | Poti 1 unplausibel zu MAF |
| 0x0068 | Poti 2 unplausibel zu MAF |
| 0x0069 | Powermanagement |
| 0x006A | Prüfsumme ungleich errechnetem Wert |
| 0x006B | Pumpenstromschwelle bei Ventilprüfung erreicht |
| 0x006C | RAM-Überprüfung |
| 0x006D | Randbedingungen verletzt |
| 0x006E | Relais-Fehler |
| 0x006F | Ruhestromverletzung |
| 0x0070 | SPI-Fehler |
| 0x0071 | Schalter defekt |
| 0x0072 | Schreib-/Lesefehler im EEPROM |
| 0x0073 | Schreibfehler im EEPROM: Wechselcode Ablage |
| 0x0074 | Segmentadaption am Anschlag |
| 0x0075 | Segmentzeit |
| 0x0076 | Sekundärluftmasse zu gering |
| 0x0077 | Sekundärluftmenge zu gering Bank 1 |
| 0x0078 | Sekundärluftmenge zu gering Bank 1 und Bank 2 |
| 0x0079 | Sekundärluftmenge zu gering Bank 2 |
| 0x007A | Sekundärluftpumpe nicht aktiv |
| 0x007B | Sekundärluftventil oder -schlauch blockiert |
| 0x007C | Sensordiagnose |
| 0x007D | Sensorsignal |
| 0x007E | Sensorsignale zueinander unplausibel |
| 0x007F | Sicherheitsabschaltung |
| 0x0080 | Sicherheitsrechner RAM |
| 0x0081 | Signal fehlt |
| 0x0082 | Signal nicht plausibel |
| 0x0083 | Signal oberhalb Schwelle |
| 0x0084 | Signal ungültig für Synchronisation |
| 0x0085 | Signal unplausibel |
| 0x0086 | Signal unterhalb Schwelle |
| 0x0087 | Signal während Schubabschaltung oberhalb Schwelle |
| 0x0088 | Signal während Schubabschaltung unterhalb Schwelle |
| 0x0089 | Signalamplitude zu gering |
| 0x008A | Signalfehler |
| 0x008B | Software |
| 0x008C | Software-Fehler |
| 0x008D | Sonde nicht angesteckt |
| 0x008E | Sondensignal zu träge |
| 0x008F | Sondensignal zu träge nach Schubphase |
| 0x0090 | Sondentemperatur ungültig |
| 0x0091 | Spannung |
| 0x0092 | Spannungsregler 1 |
| 0x0093 | Spannungsregler 2 |
| 0x0094 | Sporttastersignal unplausibel |
| 0x0095 | Startphase |
| 0x0096 | Steuergerät defekt |
| 0x0097 | Strom |
| 0x0098 | Synchronisation |
| 0x0099 | Systemfehler |
| 0x009A | Temperatur |
| 0x009B | Temperaturgradient zu steil |
| 0x009C | Temperaturmessung |
| 0x009D | Temperaturschwelle 1 überschritten |
| 0x009E | Temperaturschwelle 2 überschritten |
| 0x009F | Temperatursignal konstant |
| 0x00A0 | Tiefentladung |
| 0x00A1 | Timeout |
| 0x00A2 | Timeout |
| 0x00A3 | Timeout SPI Bus |
| 0x00A4 | Timeoutfehler: 10 Sekunden nach Kl.15 EIN noch kein EWS-Telegramm empfangen, evtl. Leitungsunterbrechung oder Kurzschluss nach Minus |
| 0x00A5 | Toggle-Bit |
| 0x00A6 | Trockenlauf |
| 0x00A7 | Unterbrechung Abgleichsleitung |
| 0x00A8 | Unterbrechung Nernstleitung |
| 0x00A9 | Unterbrechung Pumpstrompfad |
| 0x00AA | Unterbrechung virtuelle Masse |
| 0x00AB | Unterspannung |
| 0x00AC | Variantenüberwachung |
| 0x00AD | Verbrennungsaussetzer an mehreren Zylindern |
| 0x00AE | Verlustmoment unplausibel |
| 0x00AF | Wakeupleitung Masseschluss |
| 0x00B0 | Wakeupleitung Pegel unplausibel |
| 0x00B1 | Warnschwelle Stellmotor Temperatur |
| 0x00B2 | Warnschwelle Strom |
| 0x00B3 | Wert außerhalb Referenzbereich |
| 0x00B4 | Wirkungsgrad unter Schwellwert |
| 0x00B5 | Zahnfehler |
| 0x00B6 | Zahnfehler Kurbelwellengeber |
| 0x00B7 | Zahnzeitfehler |
| 0x00B8 | Zündkreisüberwachung |
| 0x00B9 | Zündzeit Zylinder 1 zu gering |
| 0x00BA | Zündzeit Zylinder 2 zu gering |
| 0x00BB | Zündzeit Zylinder 3 zu gering |
| 0x00BC | Zündzeit Zylinder 4 zu gering |
| 0x00BD | Zündzeit Zylinder 5 zu gering |
| 0x00BE | Zündzeit Zylinder 6 zu gering |
| 0x00BF | batterieloser Betrieb |
| 0x00C0 | defekt |
| 0x00C1 | gelernter Bereich ausserhalb der Toleranzen |
| 0x00C2 | interne Temperatur zu hoch |
| 0x00C3 | interner RAM-Baustein |
| 0x00C4 | irreversibel aus |
| 0x00C5 | kein Signal |
| 0x00C6 | kein Startwert programmiert |
| 0x00C7 | keine Anschläge gelernt |
| 0x00C8 | keine Codierung erfolgt (nach Programmierung) |
| 0x00C9 | keine Kommunikation über BSD-Schnittstelle |
| 0x00CA | keine Spannung am Notlauf-Eingang der Pumpe |
| 0x00CB | klemmt dauerhaft |
| 0x00CC | klemmt kurzzeitig |
| 0x00CD | klemmt offen |
| 0x00CE | kurzschluss nach Plus |
| 0x00CF | maximales Kupplungsmoment unplausibel |
| 0x00D0 | minimales Kupplungsmoment unplausibel |
| 0x00D1 | mit Kraftstoffabschaltung |
| 0x00D2 | nicht abgefallen |
| 0x00D3 | nicht angezogen |
| 0x00D4 | nicht korrekt geschlossen |
| 0x00D5 | obere Schwelle Pumpenstrom bei Referenzmessung |
| 0x00D6 | oberer Anschlag nicht gelernt |
| 0x00D7 | reversibel aus |
| 0x00D8 | schaltet zu spät |
| 0x00D9 | schwergängig zu langsam |
| 0x00DA | schwergängig, klemmt mechanisch |
| 0x00DB | unplausibel bezüglich Lambdaregelung |
| 0x00DC | untere Schwelle Pumpenstrom bei Referenzmessung |
| 0x00DD | unteren Anschlag lernen während Urinitialisierung abgebrochen |
| 0x00DE | unterer Anschlag nicht gelernt |
| 0x00DF | vertauschte Lambdasonden nach Katalysator |
| 0x00E0 | vertauschte Lambdasonden vor Katalysator |
| 0x00E1 | Überlast |
| 0x00E2 | Überlast Strom |
| 0x00E3 | Überspannung |
| 0x00E4 | Überstrom |
| 0x00E5 | Überstrom zu lange |
| 0x00E6 | Übertemperatur |
| 0x00E7 | Übertemperatur Endstufe |
| 0x00E8 | Warnschwelle Steuergerät Temperatur (VVT-Endstufe) |
| 0x00E9 | Ventil öffnet nicht |
| 0x00EA | Sensor defekt |
| 0x00EB | Zahnsprung |
| 0x00EC | Unterbrechung Pumpstrompfad oder virtuelle Masse |
| 0x00ED | Signal magerer als erwartet |
| 0x00EE | Signal fetter als erwartet |
| 0x00EF | Spannungsversorgung fehlt |
| 0x00F0 | Temperaturgradient zu hoch |
| 0x00F1 | Timeout (Ungültigkeitswert vom Kombi) |
| 0x00F2 | Oelniveau zu niedrig |
| 0x00F3 | Fertigungsmodus |
| 0x00F4 | Transportmodus |
| 0x00F5 | Werkstattmodus |
| 0x00F6 | Prüfsumme |
| 0x00F7 | Valvetronic öffnet nicht |
| 0x00F8 | Integrierte Momentenreserve nicht erreicht |
| 0x00F9 | Motorkühlmitteltemperatur - Signal festliegend hoch |
| 0x00FA | Tankfüllstand zu gering |
| 0xFFFF | unbekannte Fehlerart |
FARTTYP
Dimensions: 319 rows × 5 columns
| ORT | PLAUS | SIG | MIN | MAX |
|---|---|---|---|---|
| 0x29CC | 0x00AD | 0x000B | 0x000C | 0x00D1 |
| 0x29CD | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29CE | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29CF | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29D0 | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29D1 | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29D2 | 0x0000 | 0x000B | 0x000C | 0x00D1 |
| 0x29D9 | 0x0000 | 0x0000 | 0x0003 | 0x0000 |
| 0x29DA | 0x0000 | 0x0000 | 0x0074 | 0x0000 |
| 0x29DB | 0x0000 | 0x0000 | 0x00B6 | 0x0000 |
| 0x29DC | 0x0003 | 0x0000 | 0x0000 | 0x0000 |
| 0x29E0 | 0x0000 | 0x0000 | 0x0038 | 0x0039 |
| 0x29E1 | 0x0000 | 0x0000 | 0x0038 | 0x0039 |
| 0x29F4 | 0x0000 | 0x0000 | 0x00B4 | 0x00B4 |
| 0x29F5 | 0x0000 | 0x0000 | 0x00B4 | 0x00B4 |
| 0x29FF | 0x003B | 0x0076 | 0x007A | 0x007B |
| 0x2A00 | 0x0000 | 0x0078 | 0x0079 | 0x0077 |
| 0x2A01 | 0x0042 | 0x0000 | 0x0000 | 0x0000 |
| 0x2A02 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2A03 | 0x0000 | 0x004D | 0x0045 | 0x0047 |
| 0x2A04 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2A07 | 0x00CD | 0x0000 | 0x0000 | 0x0000 |
| 0x2A12 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2A13 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2A15 | 0x0000 | 0x0000 | 0x0000 | 0x004B |
| 0x2A16 | 0x0000 | 0x0000 | 0x004A | 0x0000 |
| 0x2A17 | 0x006B | 0x0007 | 0x00DC | 0x00D5 |
| 0x2A18 | 0x0000 | 0x004C | 0x0045 | 0x00CE |
| 0x2A19 | 0x0000 | 0x004C | 0x0045 | 0x00CE |
| 0x2A1A | 0x0035 | 0x0036 | 0x0000 | 0x0000 |
| 0x2A1B | 0x0000 | 0x0000 | 0x0000 | 0x00D4 |
| 0x2A1C | 0x0037 | 0x0000 | 0x0000 | 0x0000 |
| 0x2A2E | 0x0000 | 0x0000 | 0x0038 | 0x0039 |
| 0x2A2F | 0x0000 | 0x0000 | 0x0038 | 0x0039 |
| 0x2A30 | 0x0000 | 0x0000 | 0x0045 | 0x0047 |
| 0x2A31 | 0x0000 | 0x0063 | 0x0000 | 0x0000 |
| 0x2A32 | 0x0000 | 0x0063 | 0x0000 | 0x0000 |
| 0x2A33 | 0x0000 | 0x0000 | 0x007C | 0x0000 |
| 0x2A34 | 0x0000 | 0x0000 | 0x007C | 0x0000 |
| 0x2A35 | 0x0000 | 0x0000 | 0x0000 | 0x007D |
| 0x2A36 | 0x0000 | 0x0000 | 0x0000 | 0x007D |
| 0x2A37 | 0x007E | 0x0000 | 0x0000 | 0x0000 |
| 0x2A38 | 0x0049 | 0x0049 | 0x0000 | 0x0000 |
| 0x2A39 | 0x0000 | 0x00C7 | 0x00DE | 0x00C1 |
| 0x2A3A | 0x0072 | 0x0000 | 0x0000 | 0x0000 |
| 0x2A3B | 0x0025 | 0x0000 | 0x0000 | 0x0000 |
| 0x2A3C | 0x006E | 0x0000 | 0x0000 | 0x0000 |
| 0x2A3D | 0x0000 | 0x0044 | 0x0045 | 0x0047 |
| 0x2A3E | 0x0000 | 0x0000 | 0x00E1 | 0x0000 |
| 0x2A3F | 0x0000 | 0x0000 | 0x00AB | 0x00E3 |
| 0x2A40 | 0x0000 | 0x00E7 | 0x0000 | 0x0000 |
| 0x2A41 | 0x0000 | 0x0000 | 0x0000 | 0x00E2 |
| 0x2A42 | 0x0000 | 0x0000 | 0x0000 | 0x0023 |
| 0x2A43 | 0x0000 | 0x00E8 | 0x00B1 | 0x00B2 |
| 0x2A44 | 0x0000 | 0x002E | 0x00F7 | 0x0000 |
| 0x2A45 | 0x0000 | 0x0000 | 0x0000 | 0x00E5 |
| 0x2A46 | 0x0000 | 0x0000 | 0x00DE | 0x00D6 |
| 0x2A47 | 0x00EA | 0x0000 | 0x0000 | 0x0000 |
| 0x2A80 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2A82 | 0x00DA | 0x0000 | 0x0000 | 0x0000 |
| 0x2A85 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2A87 | 0x00DA | 0x0000 | 0x0000 | 0x0000 |
| 0x2A94 | 0x0000 | 0x0000 | 0x0085 | 0x0081 |
| 0x2A95 | 0x0000 | 0x0000 | 0x0000 | 0x0098 |
| 0x2A96 | 0x0000 | 0x0000 | 0x0000 | 0x00B5 |
| 0x2A97 | 0x0000 | 0x0000 | 0x0000 | 0x00B7 |
| 0x2A98 | 0x0000 | 0x0000 | 0x00EB | 0x00B3 |
| 0x2A99 | 0x0000 | 0x0000 | 0x00EB | 0x00B3 |
| 0x2A9A | 0x0000 | 0x0000 | 0x0000 | 0x0084 |
| 0x2A9B | 0x0000 | 0x0000 | 0x0000 | 0x0084 |
| 0x2A9E | 0x0000 | 0x0000 | 0x0000 | 0x0098 |
| 0x2A9F | 0x0000 | 0x0000 | 0x0000 | 0x0098 |
| 0x2AA0 | 0x0000 | 0x0000 | 0x0000 | 0x0081 |
| 0x2AA1 | 0x0000 | 0x0000 | 0x0000 | 0x0081 |
| 0x2AA2 | 0x0000 | 0x0000 | 0x0000 | 0x0075 |
| 0x2AA3 | 0x0000 | 0x0000 | 0x0000 | 0x0075 |
| 0x2AA8 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2AA9 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2AAA | 0x0000 | 0x0000 | 0x0020 | 0x0021 |
| 0x2AAB | 0x002B | 0x0000 | 0x0000 | 0x0000 |
| 0x2AAC | 0x002B | 0x0000 | 0x0000 | 0x0000 |
| 0x2AAD | 0x0000 | 0x005E | 0x0000 | 0x0000 |
| 0x2AAE | 0x00E6 | 0x005F | 0x0028 | 0x0027 |
| 0x2AB2 | 0x0000 | 0x0000 | 0x0080 | 0x00C3 |
| 0x2AB3 | 0x0000 | 0x0022 | 0x0014 | 0x0018 |
| 0x2AB4 | 0x0000 | 0x0000 | 0x0000 | 0x006C |
| 0x2AB5 | 0x0000 | 0x00A3 | 0x0000 | 0x0000 |
| 0x2AB6 | 0x0000 | 0x00A3 | 0x0000 | 0x0000 |
| 0x2AC1 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2AC6 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2ACB | 0x0000 | 0x0000 | 0x00D3 | 0x00D2 |
| 0x2ACC | 0x0000 | 0x0000 | 0x0000 | 0x00D8 |
| 0x2AD0 | 0x0034 | 0x0000 | 0x0000 | 0x0000 |
| 0x2ADF | 0x0000 | 0x0000 | 0x0028 | 0x0027 |
| 0x2AE0 | 0x0000 | 0x0000 | 0x0028 | 0x0027 |
| 0x2AE1 | 0x0000 | 0x0000 | 0x0000 | 0x00F8 |
| 0x2AE4 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2C24 | 0x00E0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2C27 | 0x0000 | 0x0000 | 0x0000 | 0x0039 |
| 0x2C28 | 0x0000 | 0x0000 | 0x0000 | 0x0039 |
| 0x2C2B | 0x0000 | 0x0000 | 0x0000 | 0x0038 |
| 0x2C2C | 0x0000 | 0x0000 | 0x0000 | 0x0038 |
| 0x2C2D | 0x0000 | 0x0000 | 0x0000 | 0x0088 |
| 0x2C2E | 0x0000 | 0x0000 | 0x0000 | 0x0088 |
| 0x2C31 | 0x0000 | 0x0000 | 0x000A | 0x0009 |
| 0x2C32 | 0x0000 | 0x0000 | 0x000A | 0x0009 |
| 0x2C37 | 0x0000 | 0x0000 | 0x0000 | 0x003D |
| 0x2C38 | 0x0000 | 0x0000 | 0x0000 | 0x003D |
| 0x2C39 | 0x0000 | 0x0000 | 0x0000 | 0x0089 |
| 0x2C3A | 0x0000 | 0x0000 | 0x0000 | 0x0089 |
| 0x2C3B | 0x0000 | 0x0000 | 0x0000 | 0x008D |
| 0x2C3C | 0x0000 | 0x0000 | 0x0000 | 0x008D |
| 0x2C3D | 0x00A7 | 0x00EC | 0x00EC | 0x00A8 |
| 0x2C3E | 0x00A7 | 0x00EC | 0x00EC | 0x00A8 |
| 0x2C3F | 0x0000 | 0x0000 | 0x0045 | 0x0047 |
| 0x2C40 | 0x0000 | 0x0000 | 0x0045 | 0x0047 |
| 0x2C41 | 0x0000 | 0x0000 | 0x0043 | 0x0040 |
| 0x2C42 | 0x0000 | 0x0000 | 0x0043 | 0x0040 |
| 0x2C6A | 0x00DF | 0x0000 | 0x0000 | 0x0000 |
| 0x2C6B | 0x0000 | 0x0000 | 0x00ED | 0x00EE |
| 0x2C6C | 0x0000 | 0x0000 | 0x00ED | 0x00EE |
| 0x2C6D | 0x008E | 0x0000 | 0x0000 | 0x0000 |
| 0x2C6E | 0x008E | 0x0000 | 0x0000 | 0x0000 |
| 0x2C6F | 0x0082 | 0x0000 | 0x0000 | 0x0000 |
| 0x2C70 | 0x0082 | 0x0000 | 0x0000 | 0x0000 |
| 0x2C73 | 0x0000 | 0x0000 | 0x0000 | 0x0047 |
| 0x2C74 | 0x0000 | 0x0000 | 0x0000 | 0x0047 |
| 0x2C75 | 0x0000 | 0x0000 | 0x0045 | 0x0000 |
| 0x2C76 | 0x0000 | 0x0000 | 0x0045 | 0x0000 |
| 0x2C77 | 0x0000 | 0x004C | 0x0000 | 0x0000 |
| 0x2C78 | 0x0000 | 0x004C | 0x0000 | 0x0000 |
| 0x2C79 | 0x008F | 0x0000 | 0x0000 | 0x0000 |
| 0x2C7A | 0x008F | 0x0000 | 0x0000 | 0x0000 |
| 0x2C7B | 0x0087 | 0x0000 | 0x0000 | 0x0000 |
| 0x2C7C | 0x0087 | 0x0000 | 0x0000 | 0x0000 |
| 0x2C7E | 0x0000 | 0x0000 | 0x000A | 0x0009 |
| 0x2C7F | 0x0000 | 0x0000 | 0x000A | 0x0009 |
| 0x2C9C | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2C9D | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2C9E | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2C9F | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2CA6 | 0x0000 | 0x0090 | 0x0017 | 0x0015 |
| 0x2CA7 | 0x0000 | 0x0090 | 0x0017 | 0x0015 |
| 0x2CA8 | 0x0000 | 0x0000 | 0x0000 | 0x0041 |
| 0x2CA9 | 0x0000 | 0x0000 | 0x0000 | 0x0041 |
| 0x2CEC | 0x0000 | 0x0000 | 0x0000 | 0x00CC |
| 0x2CED | 0x0000 | 0x0000 | 0x0000 | 0x00CB |
| 0x2CEE | 0x0000 | 0x0000 | 0x0000 | 0x00D9 |
| 0x2CEF | 0x0000 | 0x0013 | 0x0000 | 0x0000 |
| 0x2CF6 | 0x0067 | 0x0000 | 0x0000 | 0x0000 |
| 0x2CF7 | 0x0068 | 0x0000 | 0x0000 | 0x0000 |
| 0x2CF9 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2CFA | 0x0000 | 0x0000 | 0x0046 | 0x0047 |
| 0x2CFB | 0x00DD | 0x0031 | 0x0061 | 0x006D |
| 0x2CFC | 0x0000 | 0x0000 | 0x0060 | 0x0030 |
| 0x2CFD | 0x0000 | 0x0000 | 0x0000 | 0x005C |
| 0x2CFE | 0x0000 | 0x0000 | 0x0000 | 0x00DE |
| 0x2D06 | 0x0000 | 0x0000 | 0x0054 | 0x0053 |
| 0x2D07 | 0x0066 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D09 | 0x0000 | 0x004F | 0x0000 | 0x0000 |
| 0x2D0F | 0x0000 | 0x0000 | 0x0046 | 0x0047 |
| 0x2D1B | 0x0000 | 0x0000 | 0x0046 | 0x0047 |
| 0x2D1C | 0x0000 | 0x0000 | 0x0046 | 0x0047 |
| 0x2D1D | 0x0092 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D1E | 0x0093 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D1F | 0x0024 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D20 | 0x003A | 0x0000 | 0x0000 | 0x0000 |
| 0x2D28 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2D29 | 0x0000 | 0x0000 | 0x003F | 0x003E |
| 0x2D2A | 0x0062 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D50 | 0x0000 | 0x0057 | 0x0055 | 0x0058 |
| 0x2D51 | 0x0000 | 0x0000 | 0x0029 | 0x0085 |
| 0x2D52 | 0x00C0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D53 | 0x00C0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D54 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D55 | 0x00C0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D56 | 0x0000 | 0x0000 | 0x0012 | 0x0010 |
| 0x2D57 | 0x000F | 0x000E | 0x0000 | 0x0011 |
| 0x2D58 | 0x0094 | 0x00AE | 0x00D0 | 0x00CF |
| 0x2D59 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D5A | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D5B | 0x0000 | 0x0000 | 0x0000 | 0x0085 |
| 0x2D5C | 0x00C0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2D5F | 0x0070 | 0x003C | 0x007F | 0x008B |
| 0x2DB5 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2DB6 | 0x0071 | 0x0000 | 0x0000 | 0x0000 |
| 0x2DB7 | 0x00A5 | 0x0000 | 0x0000 | 0x0000 |
| 0x2DBE | 0x0000 | 0x0000 | 0x00D7 | 0x00C4 |
| 0x2DC0 | 0x0057 | 0x0000 | 0x0000 | 0x0056 |
| 0x2DC3 | 0x0085 | 0x001D | 0x0045 | 0x0047 |
| 0x2DC5 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2DC6 | 0x001C | 0x0000 | 0x0000 | 0x0000 |
| 0x2DC8 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DC9 | 0x00F6 | 0x00C5 | 0x0006 | 0x0000 |
| 0x2DCC | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DCD | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DCE | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DD0 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DD1 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DD2 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DD3 | 0x001E | 0x00C5 | 0x0006 | 0x0000 |
| 0x2DD4 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DD5 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DE0 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0x2DE1 | 0x001C | 0x0000 | 0x0045 | 0x0048 |
| 0x2DE2 | 0x001C | 0x0000 | 0x0045 | 0x0048 |
| 0x2DE3 | 0x0000 | 0x00C5 | 0x0000 | 0x0000 |
| 0x2DEB | 0x0000 | 0x00BF | 0x00AB | 0x00E3 |
| 0x2DEC | 0x0069 | 0x0000 | 0x00A0 | 0x0000 |
| 0x2DED | 0x006F | 0x0000 | 0x0000 | 0x0000 |
| 0x2E18 | 0x0000 | 0x0000 | 0x00B9 | 0x0000 |
| 0x2E19 | 0x0000 | 0x0000 | 0x00BA | 0x0000 |
| 0x2E1A | 0x0000 | 0x0000 | 0x00BB | 0x0000 |
| 0x2E1B | 0x0000 | 0x0000 | 0x00BC | 0x0000 |
| 0x2E1C | 0x0000 | 0x0000 | 0x00BD | 0x0000 |
| 0x2E1D | 0x0000 | 0x0000 | 0x00BE | 0x0000 |
| 0x2E24 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E25 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E26 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E27 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E28 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E29 | 0x0000 | 0x0000 | 0x0000 | 0x00B8 |
| 0x2E30 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E31 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E32 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E33 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E34 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E35 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2E68 | 0x0085 | 0x0000 | 0x005B | 0x005A |
| 0x2E69 | 0x0085 | 0x0000 | 0x005B | 0x0059 |
| 0x2E77 | 0x0000 | 0x00EF | 0x0000 | 0x0000 |
| 0x2E7C | 0x0000 | 0x0043 | 0x0000 | 0x0000 |
| 0x2E81 | 0x0000 | 0x0000 | 0x0000 | 0x0026 |
| 0x2E82 | 0x0000 | 0x00E4 | 0x00E3 | 0x00C2 |
| 0x2E83 | 0x009E | 0x009D | 0x00AB | 0x00A6 |
| 0x2E84 | 0x0000 | 0x0043 | 0x0000 | 0x0000 |
| 0x2E85 | 0x00CA | 0x0000 | 0x0000 | 0x0000 |
| 0x2E8B | 0x008C | 0x0016 | 0x0000 | 0x002A |
| 0x2E8C | 0x0097 | 0x0091 | 0x0000 | 0x009A |
| 0x2E8D | 0x00B0 | 0x0099 | 0x0000 | 0x00AF |
| 0x2E8E | 0x0000 | 0x00C9 | 0x0000 | 0x0000 |
| 0x2E96 | 0x0000 | 0x0000 | 0x0000 | 0x0095 |
| 0x2E97 | 0x0050 | 0x002C | 0x0000 | 0x00E6 |
| 0x2E98 | 0x0000 | 0x00C9 | 0x0000 | 0x0000 |
| 0x2E9F | 0x0065 | 0x0043 | 0x005D | 0x009C |
| 0x2EA1 | 0x0000 | 0x00C9 | 0x0000 | 0x0000 |
| 0x2EE0 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2EE1 | 0x00DB | 0x0000 | 0x0000 | 0x0000 |
| 0x2EE2 | 0x009F | 0x0000 | 0x0000 | 0x0000 |
| 0x2EE3 | 0x009B | 0x0000 | 0x0000 | 0x0000 |
| 0x2EEA | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2EEB | 0x00F0 | 0x0000 | 0x0000 | 0x0000 |
| 0x2EEC | 0x0085 | 0x0000 | 0x0000 | 0x0083 |
| 0x2EF4 | 0x00CD | 0x0000 | 0x0000 | 0x0000 |
| 0x2EF5 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2EFE | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2EFF | 0x0051 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F08 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2F09 | 0x0085 | 0x0000 | 0x0086 | 0x0083 |
| 0x2F0D | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F0F | 0x0051 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F12 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F44 | 0x002F | 0x0033 | 0x00C6 | 0x0005 |
| 0x2F45 | 0x0052 | 0x00A4 | 0x002D | 0x0000 |
| 0x2F46 | 0x0000 | 0x0073 | 0x0032 | 0x004E |
| 0x2F47 | 0x0000 | 0x0000 | 0x0096 | 0x0096 |
| 0x2F4E | 0x0000 | 0x0081 | 0x0000 | 0x0000 |
| 0x2F4F | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F58 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F63 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F64 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F67 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2F6C | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F71 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F76 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2F77 | 0x0000 | 0x0000 | 0x0086 | 0x0083 |
| 0x2F7B | 0x0000 | 0x004C | 0x0000 | 0x0000 |
| 0x2F80 | 0x0085 | 0x00F1 | 0x0000 | 0x00F9 |
| 0x2F85 | 0x0000 | 0x0000 | 0x0045 | 0x0048 |
| 0x2F8F | 0x0064 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F94 | 0x0000 | 0x004C | 0x0045 | 0x0047 |
| 0x2F99 | 0x0085 | 0x0000 | 0x0000 | 0x0000 |
| 0x2F9A | 0x0000 | 0x008A | 0x0045 | 0x0048 |
| 0x2F9E | 0x0085 | 0x0081 | 0x00F2 | 0x0000 |
| 0x2FA3 | 0x00C8 | 0x001F | 0x0000 | 0x0000 |
| 0x2FA4 | 0x00AC | 0x001B | 0x0000 | 0x0000 |
| 0x2FC6 | 0x0000 | 0x00F5 | 0x00F4 | 0x00F3 |
| 0xCD87 | 0x0019 | 0x001A | 0x0000 | 0x0000 |
| 0xCD8B | 0x0000 | 0x001A | 0x0000 | 0x0000 |
| 0xCD8F | 0x0019 | 0x001A | 0x0000 | 0x0000 |
| 0xCD94 | 0x0000 | 0x00A2 | 0x0000 | 0x0000 |
| 0xCD95 | 0x006A | 0x00A2 | 0x000D | 0x0000 |
| 0xCD96 | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD97 | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD98 | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD99 | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD9A | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD9B | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCD9C | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCD9D | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCD9E | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCD9F | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA0 | 0x006A | 0x00A1 | 0x000D | 0x0000 |
| 0xCDA1 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA2 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA3 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA4 | 0x0000 | 0x00A1 | 0x000D | 0x0000 |
| 0xCDA5 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA6 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA7 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDA8 | 0x0000 | 0x00A1 | 0x000D | 0x0000 |
| 0xCDA9 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAA | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAB | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAC | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAD | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAE | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDAF | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
| 0xCDB0 | 0x0000 | 0x00A1 | 0x0000 | 0x0000 |
FUMWELTTEXTE
Dimensions: 465 rows × 9 columns
| UWNR | L/H | UWTYP | NAME | UWTEXT | ADD | MUL | UW_EINH | DIV |
|---|---|---|---|---|---|---|---|---|
| 0x4200 | - | unsigned char | - | Ansauglufttemperatur 1 | -47,9999985694886 | 0,75 | °C | 1 |
| 0x4201 | - | unsigned integer | - | Umgebungsdruck | 0,0 | 0,0829175263643265 | hPa | 1 |
| 0x4202 | - | unsigned integer | - | Saugrohrdruck | 0,0 | 0,0829175263643265 | hPa | 1 |
| 0x4203 | - | unsigned integer | - | Massenstrom vom HFM | 0,0 | 0,03125 | kg/h | 1 |
| 0x4204 | - | unsigned char | - | Umgebungstemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x4205 | - | unsigned integer | - | Saugrohrdruck 1 / Ladedruck 1 | 0,0 | 0,0829175263643265 | hPa | 1 |
| 0x4300 | - | unsigned char | - | Kühlwassertemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x4301 | - | unsigned char | - | Kuehlerauslasstemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x4302 | - | unsigned char | - | Wasserpumpe Leistung ueber BSD | 0,0 | 0,390625 | % | 1 |
| 0x4303 | - | unsigned char | - | Wasserpumpe Elektronik Temperatur | -50,0 | 1,0 | °C | 1 |
| 0x4304 | - | unsigned char | - | Wasserpumpe Strom | 0,0 | 0,5 | A | 1 |
| 0x4305 | - | unsigned char | - | Wasserpumpe Drehzahl Ist | 0,0 | 1,0 | - | 1 |
| 0x4306 | - | unsigned char | - | Wasserpumpe Drehzahl Soll | 0,0 | 1,0 | - | 1 |
| 0x4400 | - | unsigned char | - | Ölstand Mittelwert Langzeit | 0,0 | 0,29296875 | - | 1 |
| 0x4401 | - | unsigned char | - | Füllstand Motoröl | 0,0 | 1,0 | % | 1 |
| 0x4402 | - | signed integer | - | Öltemperatur | 0,0 | 0,100000001490116 | °C | 1 |
| 0x4403 | - | unsigned long | - | Kraftstoff-Verbrauch seit letztem Service | 0,0 | 1,220703125E-4 | - | 1 |
| 0x4404 | - | unsigned integer | - | km seit letztem Service | 0,0 | 10,0 | km | 1 |
| 0x4405 | - | unsigned char | - | Oelsensor Niveau Rohwert | 0,0 | 1,0 | - | 1 |
| 0x4406 | - | unsigned integer | - | Oelsensor Qualität Rohwert | 0,0 | 1,0 | - | 1 |
| 0x4407 | - | unsigned char | - | Oelsensor Temperatur Rohwert | 0,0 | 1,0 | - | 1 |
| 0x4408 | - | signed integer | - | Oelsensor Temperatur | 0,0 | 0,100000001490116 | °C | 1 |
| 0x4409 | - | unsigned char | - | Oelsensor Niveau | 0,0 | 0,29296875 | - | 1 |
| 0x440A | - | unsigned integer | - | Oelsensor Qualität | 0,0 | 9,1552734375E-5 | - | 1 |
| 0x440B | - | unsigned char | - | Länderfaktor 1 codiert | 0,0 | 0,00999999977648258 | - | 1 |
| 0x440C | - | unsigned char | - | Länderfaktor 2 codiert | 0,0 | 0,00999999977648258 | - | 1 |
| 0x440D | - | unsigned char | - | Länderfaktor 1 | 0,0 | 0,00999999977648258 | - | 1 |
| 0x440E | - | unsigned char | - | Länderfaktor 2 | 0,0 | 0,00999999977648258 | - | 1 |
| 0x440F | - | unsigned char | - | Kurzmittelwert-Niveau für den Tester | 0,0 | 0,29296875 | - | 1 |
| 0x4410 | - | signed integer | - | Restweg aus Permittivität abgeleitet | 0,0 | 10,0 | km | 1 |
| 0x4411 | - | signed integer | - | Restweg aus Kraftstoffverbrauch abgeleitet | 0,0 | 10,0 | km | 1 |
| 0x4412 | - | unsigned integer | - | Öl-Alter in Monate | 0,0 | 1,0 | - | 1 |
| 0x4413 | - | unsigned integer | - | aufbereitete Permittivität bei letztem Ölwechsel | 0,0 | 9,1552734375E-5 | - | 1 |
| 0x4414 | - | unsigned integer | - | Permittivität für Bewertung aufbereitet (extrapoliert) | 0,0 | 9,1552734375E-5 | - | 1 |
| 0x4415 | - | unsigned integer | - | Offset für Permittivitätskorrektur | 0,0 | 9,1552734375E-5 | - | 1 |
| 0x4416 | - | unsigned integer | - | zugeteilte Bonuskraftstoffmenge | 0,0 | 1,0 | - | 1 |
| 0x4417 | - | unsigned integer | - | zugeteilter Permittivitätsbonus | 0,0 | 9,1552734375E-5 | - | 1 |
| 0x4500 | - | unsigned integer | - | VVT-Excenter Istwert | 0,0 | 0,021973192691803 | Grad | 1 |
| 0x4501 | - | unsigned integer | - | VVT-Excenter Sollwert | 0,0 | 0,021973192691803 | ° | 1 |
| 0x4502 | - | unsigned integer | - | Mechanischer Verstellbereich VVT aus Lernroutine | 0,0 | 0,021973192691803 | Grad | 1 |
| 0x4503 | - | unsigned integer | - | Sollwert für Lageregler | 0,0 | 0,021973192691803 | ° | 1 |
| 0x4504 | - | unsigned char | - | Sollwert für Lageregler vom Tester | 0,0 | 0,70579606294632 | Grad | 1 |
| 0x4505 | - | signed integer | - | Sollwert Einlassspreizung | 0,0 | 0,100000001490116 | °CRK | 1 |
| 0x4506 | - | unsigned integer | - | Nockenwellenposition Einlass | -95,9999971389771 | 0,375 | °CRK | 1 |
| 0x4507 | - | unsigned integer | - | Nockenwellenposition Auslass | -95,9999971389771 | 0,375 | °CRK | 1 |
| 0x4508 | - | signed integer | - | Istwert Einlassspreizung | 0,0 | 0,100000001490116 | °CRK | 1 |
| 0x4509 | - | unsigned char | - | Istwert Auslassspreizung | -39,9999978542329 | -0,375 | °CRK | 1 |
| 0x450A | - | signed integer | - | Normspreizung Auslass | 0,0 | 0,0234375 | °CRK | 1 |
| 0x450B | - | signed integer | - | Normspreizung Einlass | 0,0 | 0,0234375 | °CRK | 1 |
| 0x4600 | - | unsigned integer | - | aktueller Drosselklappenwinkel | 0,0 | 0,00729414634406567 | °TPS | 1 |
| 0x4601 | - | unsigned integer | - | Drosselklappe Sollwert | 0,0 | 0,00729414634406567 | °TPS | 1 |
| 0x4602 | - | unsigned long | - | Generator Sollspannung ueber BSD | 10,6 | 0,100000001490116 | V | 1 |
| 0x4603 | - | signed integer | - | Chiptemperatur Generator 1 | 0,0 | 0,100000001490116 | °C | 1 |
| 0x4604 | - | unsigned char | - | Generator Strom | 0,0 | 1,0 | - | 1 |
| 0x4605 | - | unsigned char | - | Chipversion Generator 1 | 0,0 | 1,0 | - | 1 |
| 0x4606 | - | unsigned char | - | Reglerversion Generator 1 | 0,0 | 1,0 | - | 1 |
| 0x4607 | - | unsigned char | - | Herstellercode Generator 1 | 0,0 | 1,0 | - | 1 |
| 0x4608 | - | unsigned char | - | Kennung Generatortyp Generator 1 | 0,0 | 1,0 | - | 1 |
| 0x4609 | - | unsigned char | - | Kl.87 Spannung / Versorgung DME | 0,0 | 0,101562492549419 | V | 1 |
| 0x460A | - | unsigned integer | - | Batteriespannung aktuell | 0,0 | 0,0149999996647239 | V | 1 |
| 0x460B | - | unsigned integer | - | Batteriespannung von IBS gemessen | 6,0 | 2,50000011874363E-4 | - | 1 |
| 0x460C | - | unsigned integer | - | Batteriespannung vom AD-Wandler DME | 0,0 | 0,0048828125 | V | 1 |
| 0x460D | - | signed integer | - | Korrekturwert Abschaltung | 0,0 | 0,00152587890625 | - | 1 |
| 0x460E | - | signed integer | - | Abstand zur Startfähigkeitsgrenze | 0,0 | 0,0030517578125 | - | 1 |
| 0x460F | - | unsigned char | - | Batterielast | 0,0 | 0,390625 | % | 1 |
| 0x4610 | - | unsigned integer | - | aktuelle Position Disaklappen | 0,0 | 0,00305175711400807 | % | 1 |
| 0x4611 | - | unsigned char | - | Sollwert E-Lüfter als PWM Wert | 0,0 | 0,390625 | % | 1 |
| 0x4612 | - | unsigned char | - | Erregerstrom Generator 1 | 0,0 | 0,125 | A | 1 |
| 0x4613 | - | unsigned integer | - | Kopierter Wert von zum Generator gesendeter Sollspannung Generator 1 | 0,0 | 0,100000001490116 | V | 1 |
| 0x4614 | - | unsigned char | - | Auslastungsgrad Generator 1 | 0,0 | 0,390625 | % | 1 |
| 0x4615 | - | unsigned char | - | Kopie begrenzter Erregerstrom Generator 1 | 0,0 | 0,125 | A | 1 |
| 0x4616 | - | unsigned char | - | Kopie Generator 1 LR Vorgabe auf Bus gelegt | 0,0 | 0,100000001490116 | s | 1 |
| 0x4617 | - | signed integer | - | gefiltertes Generatormoment absolut Ausgang | 0,0 | 0,100000001490116 | Nm | 1 |
| 0x4618 | - | 0xFF | - | Kopie Drehzahlschwelle für LR-Funktion Generator 1 aktiv | 0 | 1 | 0/1 | 1 |
| 0x4700 | - | 0xFF | - | Status Lambdasonde betriebsbereit Vorkat Bank 1 | 0 | 1 | 0/1 | 1 |
| 0x4701 | - | 0xFF | - | Status Lambdasonde betriebsbereit Vorkat Bank 2 | 0 | 1 | 0/1 | 1 |
| 0x4702 | - | unsigned integer | - | Spannung Lambdasonde Vorkat Bank 1 mit Offsetkorrektur | 0,0 | 0,0048828125 | V | 1 |
| 0x4703 | - | unsigned integer | - | Spannung Lambdasonde Vorkat Bank 2 mit Offsetkorrektur | 0,0 | 0,0048828125 | V | 1 |
| 0x4704 | - | unsigned integer | - | Lambda Sollwert Bank 1 | 0,0 | 9,765625E-4 | - | 1 |
| 0x4705 | - | unsigned integer | - | Lambda Sollwert Bank 2 | 0,0 | 9,765625E-4 | - | 1 |
| 0x4800 | - | 0xFF | - | Kupplungsschalter Status | 0 | 1 | 0/1 | 1 |
| 0x4801 | - | 0xFF | - | Kupplungsschalter vorhanden | 0 | 1 | 0/1 | 1 |
| 0x4802 | - | 0xFF | - | Sporttaster aktiv | 0 | 1 | 0/1 | 1 |
| 0x4803 | - | unsigned char | - | Status Klima ein | 0,0 | 1,0 | - | 1 |
| 0x4804 | - | 0xFF | - | Sekundärluft Pumpe aktiv | 0 | 1 | 0/1 | 1 |
| 0x4805 | - | 0xFF | - | Startrelais über CAN aktiv | 0 | 1 | 0/1 | 1 |
| 0x4806 | - | unsigned char | - | Steuergeraete-Innentemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x4807 | - | unsigned integer | - | Motor Drehzahl | 0,0 | 1,0 | rpm | 1 |
| 0x4808 | - | unsigned integer | - | Leerlauf Solldrehzahl | 0,0 | 1,0 | rpm | 1 |
| 0x4809 | - | 0xFF | - | Status LL | 0 | 1 | 0/1 | 1 |
| 0x480A | - | unsigned long | - | Kilometerstand Auflösung 1 km | 0,0 | 1,0 | km | 1 |
| 0x480B | - | unsigned char | - | Pedalwert Fahrerwunsch in % | 0,0 | 0,390625 | % | 1 |
| 0x5800 | - | unsigned char | - | Zeit nach Start | 0,0 | 256,0 | s | 1 |
| 0x5801 | - | unsigned char | - | Umgebungsdruck | 0,0 | 1,0 | kPa | 1 |
| 0x5802 | - | 0xFF | _CNV_S_5_LACO_RANGE_765 | Zustand Lambdaregelung Bank 1 | 0 | 1 | 0-n | 1 |
| 0x5803 | - | 0xFF | _CNV_S_5_LACO_RANGE_765 | Zustand Lambdaregelung Bank 2 | 0 | 1 | 0-n | 1 |
| 0x5804 | - | unsigned char | - | Berechneter Lastwert | 0,0 | 0,390625 | % | 1 |
| 0x5805 | - | unsigned char | - | Kühlmitteltemperatur OBD | -40,0 | 1,0 | °C | 1 |
| 0x5806 | - | unsigned char | - | Lambda Integrator Gruppe 1 | -100,000002235174 | 0,78125 | % | 1 |
| 0x5807 | - | unsigned char | - | Lambda Adaption Summe mul. & add. Gruppe 1 | -100,000002235174 | 0,78125 | % | 1 |
| 0x5808 | - | unsigned char | - | Lambda Integrator Gruppe 2 | -100,000002235174 | 0,78125 | % | 1 |
| 0x5809 | - | unsigned char | - | Lambda Adaption Summe mul. & add. Gruppe 2 | -100,000002235174 | 0,78125 | % | 1 |
| 0x580A | - | unsigned char | - | Kraftstoffdruck | 0,0 | 3,0 | kPa | 1 |
| 0x580B | - | unsigned char | - | Saugrohrdruck | 0,0 | 1,0 | kPa | 1 |
| 0x580C | - | unsigned char | - | Drehzahl | 0,0 | 64,0 | rpm | 1 |
| 0x580D | - | unsigned char | - | Geschwindigkeit | 0,0 | 1,0 | km/h | 1 |
| 0x580E | - | unsigned char | - | Zündzeitpunkt Zylinder 1 | -64,0 | 0,5 | °CRK | 1 |
| 0x580F | - | unsigned char | - | Ansauglufttemperatur | -40,0 | 1,0 | °C | 1 |
| 0x5810 | - | unsigned char | - | Luftdurchsatz OBD | 0,0 | 2,5599999427795406 | g/s | 1 |
| 0x5811 | - | unsigned char | - | Motordrehzahl | 0,0 | 32,0 | rpm | 1 |
| 0x5812 | - | unsigned char | - | Luftmasse gemessen | 0,0 | 8,0 | kg/h | 1 |
| 0x5813 | - | signed char | - | Relative Last | 0,0 | 2,5599999427795406 | % | 1 |
| 0x5814 | - | unsigned char | - | Fahrpedalwert | 0,0 | 0,390625 | % | 1 |
| 0x5815 | - | unsigned char | - | Batteriespannung | 0,0 | 0,2560000121593472 | V | 1 |
| 0x5816 | - | unsigned char | - | Lambda Setpoint | 0,0 | 0,0078125 | - | 1 |
| 0x5817 | - | unsigned char | - | Umgebungstemperatur | -40,0 | 1,0 | °C | 1 |
| 0x5818 | - | unsigned char | - | Luftmasse gerechnet | 0,0 | 5,425863742828365 | mg/stk | 1 |
| 0x5819 | - | unsigned char | - | Drehzahl OBD Byte | 0,0 | 64,0 | rpm | 1 |
| 0x581A | - | unsigned char | - | Nockenwelle Einlass | 50,0 | 0,400000005960464 | °CRK | 1 |
| 0x581B | - | unsigned char | - | Nockenwelle Einlass Sollwert | 50,0 | 0,400000005960464 | °CRK | 1 |
| 0x581C | - | unsigned char | - | Nockenwelle Auslass | -39,9999978542329 | -0,375 | °CRK | 1 |
| 0x581D | - | unsigned char | - | Nockenwelle Auslass Sollwert | -39,9999978542329 | -0,375 | °CRK | 1 |
| 0x581E | - | unsigned char | - | Ansauglufttemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x581F | - | unsigned char | - | Motortemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5820 | - | unsigned char | - | Kühlmitteltemperatur Kühlerausgang | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5821 | - | unsigned char | - | Steuergerät Innentemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5822 | - | unsigned char | - | ( Motor ) - Öltemperatur | -40,0 | 1,0 | °C | 1 |
| 0x5823 | - | unsigned char | - | Zeit Motor steht | 0,0 | 256,0 | min | 1 |
| 0x5824 | - | unsigned char | - | Umgebungstemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5825 | - | unsigned char | - | Abstellzeit | 0,0 | 4,0 | min | 1 |
| 0x5826 | - | unsigned char | - | Drosselklappe Sensor 1 | 0,0 | 1,8673014640808114 | °TPS | 1 |
| 0x5827 | - | unsigned char | - | Lambdasonden Heizung Vorkat 1 | 0,0 | 0,390625 | % | 1 |
| 0x5828 | - | unsigned char | - | Lambdasonden Heizung Vorkat 2 | 0,0 | 0,390625 | % | 1 |
| 0x5829 | - | unsigned char | - | Lambdasonden Heizung Hinterkat 1 | 0,0 | 0,390625 | % | 1 |
| 0x582A | - | unsigned char | - | Lambdasonden Heizung Hinterkat 2 | 0,0 | 0,390625 | % | 1 |
| 0x582B | - | unsigned char | - | Drehmomenteingriff über CAN | 0,0 | 1,0 | - | 1 |
| 0x582C | - | unsigned char | - | Anzahl ungültiger Schreibüberprüfungszyklen am SPI-Interface der Lambdasonde vor Kat Bank 1 | 0,0 | 1,0 | - | 1 |
| 0x582D | - | unsigned char | - | Anzahl ungültiger Schreibüberprüfungszyklen am SPI-Interface der Lambdasonde vor Kat Bank 2 | 0,0 | 1,0 | - | 1 |
| 0x582E | - | unsigned char | - | Adaptionsfaktor Sensor Zeitkonstante vor Kat Bank 1 | 0,0 | 0,25 | - | 1 |
| 0x582F | - | unsigned char | - | Adaptionsfaktor Sensor Zeitkonstante vor Kat Bank 2 | 0,0 | 0,25 | - | 1 |
| 0x5830 | - | unsigned char | - | Mittelwert der normierten Signalamplitude der Lambdasonde vor Kat Bank 1 | 0,0 | 0,25 | - | 1 |
| 0x5831 | - | unsigned char | - | Mittelwert der normierten Signalamplitude der Lambdasonde vor Kat Bank 2 | 0,0 | 0,25 | - | 1 |
| 0x5832 | - | 0xFF | _CNV_S_6_RANGE_STAT_146 | Motor Status | 0 | 1 | 0-n | 1 |
| 0x5833 | - | unsigned char | - | Umgebungstemperatur beim Start | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5834 | - | unsigned char | - | Umgebungsdruck | 0,0 | 21,226886749267585 | hPa | 1 |
| 0x5836 | - | signed char | - | Drehzahlgradient | 0,0 | 32,0 | rpm/s | 1 |
| 0x5837 | - | 0xFF | _CNV_S_11_EGCP_RANGE_728 | Status OBD-I Fehler vor Kat Bank 1 | 0 | 1 | 0-n | 1 |
| 0x5838 | - | 0xFF | _CNV_S_11_EGCP_RANGE_728 | Status OBD-I Fehler vor Kat Bank 2 | 0 | 1 | 0-n | 1 |
| 0x5839 | - | 0xFF | _CNV_S_6_RANGE_STAT_305 | Status Drosselklappe Notlauf | 0 | 1 | 0-n | 1 |
| 0x583A | - | unsigned char | - | Ansauglufttemperatur beim Start | -47,9999985694886 | 0,75 | °C | 1 |
| 0x583B | - | unsigned char | - | Kraftstofftank Füllstand | 0,0 | 1,0 | l | 1 |
| 0x583C | - | unsigned char | - | Spannung Kl. 87 | 0,0 | 0,101562492549419 | V | 1 |
| 0x583D | - | unsigned char | - | Reset: Quelle | 0,0 | 1,0 | - | 1 |
| 0x583E | - | unsigned char | - | Motordrehzahl bei Reset | 0,0 | 256,0 | rpm | 1 |
| 0x583F | - | unsigned char | - | Drosselklappe Sollwert | 0,0 | 1,8673014640808114 | °TPS | 1 |
| 0x5840 | - | unsigned char | - | CPU Last bei Reset | 0,0 | 25,0 | % | 1 |
| 0x5841 | - | unsigned char | - | SG-Innentemperatur Rohwert | 0,0 | 0,01953125 | V | 1 |
| 0x5843 | - | unsigned char | - | Versorgung FWG 1 | 0,0 | 0,0390625037252903 | V | 1 |
| 0x5845 | - | unsigned char | - | Spannung Lambdasonde VorKat 1 | 0,0 | 0,01953125 | V | 1 |
| 0x5846 | - | unsigned char | - | Spannung Pedalwertgeber 1 | 0,0 | 0,01953125 | V | 1 |
| 0x5847 | - | unsigned char | - | Spannung Pedalwertgeber 2 | 0,0 | 0,01953125 | V | 1 |
| 0x5848 | - | unsigned char | - | Spannung Lambdasonde VorKat 2 | 0,0 | 0,01953125 | V | 1 |
| 0x5849 | - | unsigned char | - | Spannung Lambdasonde HinterKat 1 | 0,0 | 0,01953125 | V | 1 |
| 0x584A | - | unsigned char | - | Spannung Kl. 15 Rohwert | 0,0 | 0,01953125 | V | 1 |
| 0x584B | - | unsigned char | - | Spannung Lambdasonde HinterKat 2 | 0,0 | 0,01953125 | V | 1 |
| 0x584C | - | unsigned char | - | Spannung Drosselklappe Poti 2 | 0,0 | 0,01953125 | V | 1 |
| 0x584D | - | unsigned char | - | korrigierter Sollwert Durchfluss Tankentlüftung | 0,0 | 0,03125 | kg/h | 1 |
| 0x584E | - | unsigned char | - | Spannung Drosselklappe Poti 1 | 0,0 | 0,01953125 | V | 1 |
| 0x584F | - | unsigned char | - | Spannung Luftmasse | 0,0 | 0,0196000002324581 | V | 1 |
| 0x5850 | - | unsigned char | - | Spannung Motortemperatur | 0,0 | 0,01953125 | V | 1 |
| 0x5851 | - | unsigned char | - | Spannung Ansauglufttemperatur | 0,0 | 0,0196000002324581 | - | 1 |
| 0x5852 | - | unsigned char | - | Kühlmitteltemperatur Kühlerausgang Rohwert | 0,0 | 0,01953125 | V | 1 |
| 0x5853 | - | unsigned char | - | Spannung Kl.87 Rohwert | 0,0 | 0,01953125 | V | 1 |
| 0x5854 | - | unsigned char | - | Versorgung FWG 2 | 0,0 | 0,0390625037252903 | V | 1 |
| 0x5855 | - | signed char | - | Mittelwert Bank 1 | 2,22044609888115E-14 | 0,390625 | % | 1 |
| 0x5856 | - | signed char | - | Mittelwert Bank 2 | 2,22044609888115E-14 | 0,390625 | % | 1 |
| 0x5858 | - | unsigned char | - | Drosselklappe aktueller Wert | 0,0 | 1,8673014640808114 | °TPS | 1 |
| 0x5859 | - | unsigned char | - | DMTL Strom Referenzleck | 0,0 | 0,195312470197678 | mA | 1 |
| 0x585A | - | unsigned char | - | DMTL Strom Grobleck | 0,0 | 0,195312470197678 | mA | 1 |
| 0x585B | - | unsigned char | - | DMTL Strom Diagnoseende | 0,0 | 0,195312470197678 | mA | 1 |
| 0x585C | - | unsigned char | - | Widerstand Lambdasonde NK 1 | 0,0 | 256,0 | ohm | 1 |
| 0x585D | - | unsigned char | - | Widerstand Lambdasonde NK 2 | 0,0 | 256,0 | ohm | 1 |
| 0x585E | - | unsigned char | - | unteres Byte Widerstand Lambdasonde NK 1 | 0,0 | 1,0 | ohm | 1 |
| 0x585F | - | unsigned char | - | unteres Byte Widerstand Lambdasonde NK 2 | 0,0 | 1,0 | ohm | 1 |
| 0x5860 | - | unsigned char | - | Widerstand Lambdasonde VK 1 | 0,0 | 64,0 | ohm | 1 |
| 0x5861 | - | unsigned char | - | Widerstand Lambdasonde VK 2 | 0,0 | 64,0 | ohm | 1 |
| 0x5863 | - | unsigned char | - | untere Byte Widerstand Lambdasonde VK 1 | 0,0 | 0,25 | ohm | 1 |
| 0x5864 | - | unsigned char | - | untere Byte Widerstand Lambdasonde VK 2 | 0,0 | 0,25 | ohm | 1 |
| 0x5865 | - | unsigned char | - | Oelstand Mittelwert Langzeit | 0,0 | 0,29296875 | - | 1 |
| 0x5866 | - | unsigned char | - | Füllstand Motoröl | 0,0 | 1,0 | - | 1 |
| 0x5867 | - | unsigned char | - | Kilometerstand | 0,0 | 2560,0 | km | 1 |
| 0x5868 | - | unsigned char | - | Status Standverbraucher registriert Teil 1 | 0,0 | 1,0 | - | 1 |
| 0x5869 | - | unsigned char | - | Status Standverbraucher registriert Teil 2 | 0,0 | 1,0 | - | 1 |
| 0x586A | - | unsigned char | - | Batteriespannung von IBS gemessen | 6,0 | 0,06400000303983693 | - | 1 |
| 0x586B | - | unsigned char | - | Zeit mit Ruhestrom 80 - 200 mA | 0,0 | 14,9333333969116 | min | 1 |
| 0x586C | - | unsigned char | - | Zeit mit Ruhestrom 200 - 1000 mA | 0,0 | 14,9333333969116 | min | 1 |
| 0x586D | - | unsigned char | - | Zähler Erkennung schlechte Strasse | 0,0 | 256,0 | - | 1 |
| 0x586E | - | unsigned char | - | Zeit mit Ruhestrom >1000 mA | 0,0 | 14,9333333969116 | min | 1 |
| 0x5870 | - | unsigned char | - | Spannung DME Umgebungsdruck | 0,0 | 0,01953125 | V | 1 |
| 0x5871 | - | unsigned char | - | Lambda-Sollwert Gruppe 1 | 0,0 | 0,0078125 | - | 1 |
| 0x5873 | - | unsigned char | - | Lambda-Sollwert Gruppe 2 | 0,0 | 0,0078125 | - | 1 |
| 0x5874 | - | unsigned char | - | Spannung Strommessung DMTL | 0,0 | 0,01953125 | V | 1 |
| 0x5876 | - | unsigned char | - | Mittlere Diagnosewert minimale Luftmasse | 0,0 | 1,0 | kg/h | 1 |
| 0x5877 | - | unsigned char | - | Differenz zwischen Maximum und Minimum SAF | 0,0 | 4,0 | kg/h | 1 |
| 0x5878 | - | signed char | - | Lambdaverschiebung Rückführregler 1 | 0,0 | 9,765625E-4 | - | 1 |
| 0x5879 | - | signed char | - | Lambdaverschiebung Rückführregler 2 | 0,0 | 9,765625E-4 | - | 1 |
| 0x587A | - | 0xFF | _CNV_S_6_RANGE_STAT_106 | Status FGR | 0 | 1 | 0-n | 1 |
| 0x587C | - | 0xFF | _CNV_S_7_RANGE_ECU__142 | Status Motorsteuerung | 0 | 1 | 0-n | 1 |
| 0x587D | - | 0xFF | _CNV_S_4_EGCP_RANGE_739 | Symptom bei Schubabschaltung Sonde vor Kat Bank 1 | 0 | 1 | 0-n | 1 |
| 0x587E | - | 0xFF | _CNV_S_4_EGCP_RANGE_739 | Symptom bei Schubabschaltung Sonde vor Kat Bank 2 | 0 | 1 | 0-n | 1 |
| 0x587F | - | unsigned char | - | Tastverhaeltnis E-Lüfter | 0,0 | 0,390625 | % | 1 |
| 0x5880 | - | unsigned char | - | Tastverhältnis: Luftklappe | 0,0 | 0,390625 | % | 1 |
| 0x5881 | - | unsigned char | - | berechneter Gang | 0,0 | 1,0 | - | 1 |
| 0x5882 | - | unsigned char | - | Motortemperatur beim Start | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5883 | - | unsigned char | - | Spannung Klopfwerte Zylinder 1 | 0,0 | 0,01953125 | V | 1 |
| 0x5885 | - | unsigned char | - | Spannung Klopfwerte Zylinder 3 | 0,0 | 0,01953125 | V | 1 |
| 0x5886 | - | unsigned char | - | Spannung Klopfwerte Zylinder 6 | 0,0 | 0,01953125 | V | 1 |
| 0x5888 | - | unsigned char | - | Spannung Klopfwerte Zylinder 4 | 0,0 | 0,01953125 | V | 1 |
| 0x5889 | - | unsigned char | - | Lambda-Istwert Gruppe 1 | 0,0 | 0,0078125 | - | 1 |
| 0x588A | - | unsigned char | - | Lambda-Istwert Gruppe 2 | 0,0 | 0,0078125 | - | 1 |
| 0x588B | - | unsigned char | - | Zeit seit Startende | 0,0 | 25,600000381469695 | s | 1 |
| 0x588C | - | signed char | - | Keramiktemperatur Lambdasonde VK 1 | 0,0 | 16,0 | °C | 1 |
| 0x588D | - | unsigned char | - | aktuelle Zeit DMTL Leckmessung | 0,0 | 25,600000381469695 | s | 1 |
| 0x588E | - | unsigned char | - | Pumpenstrom bei DMTL Pumpenprüfung | 0,0 | 1,5625238418579097 | mA | 1 |
| 0x588F | - | signed char | - | Keramiktemperatur Lambdasonde VK 2 | 0,0 | 16,0 | °C | 1 |
| 0x5891 | - | signed char | - | Momentanforderung an der Kupplung | 0,0 | 8,0 | Nm | 1 |
| 0x5893 | - | signed char | - | Drehmomentabfall schnell bei Gangwechsel | 0,0 | 8,0 | Nm | 1 |
| 0x5894 | - | 0xFF | _CNV_S_4_EGCP_RANGE_732 | Symptom Lambdasondenheizung vor Kat Bank 1 | 0 | 1 | 0-n | 1 |
| 0x5895 | - | 0xFF | _CNV_S_4_EGCP_RANGE_732 | Symptom Lambdasondenheizung vor Kat Bank 2 | 0 | 1 | 0-n | 1 |
| 0x5896 | - | unsigned char | - | Abgastemperatur nach Kat Bank 1 | 0,0 | 16,0 | °C | 1 |
| 0x5897 | - | unsigned char | - | Abgastemperatur nach Kat Bank 2 | 0,0 | 16,0 | °C | 1 |
| 0x5898 | - | unsigned char | - | Generator Sollspannung | 0,0 | 0,100000001490116 | V | 1 |
| 0x5899 | - | unsigned char | - | Istwert DISA-Position | 0,0 | 0,7812498211860659 | % | 1 |
| 0x589B | - | signed char | - | Spannungsoffset Signalpfad CJ120 1 | -3,60784326466368E-6 | 0,00488278456032276 | V | 1 |
| 0x589C | - | signed char | - | Spannungsoffset Signalpfad CJ120 2 | -3,60784326466368E-6 | 0,00488278456032276 | V | 1 |
| 0x589E | - | 0xFF | _CNV_S_3_STATE_RLY__374 | Status VVT- Entlastungsrelais | 0 | 1 | 0-n | 1 |
| 0x589F | - | unsigned char | - | VVT Istwinkel | 0,0 | 0,78125 | ° | 1 |
| 0x58A0 | - | unsigned char | - | VVT Sollwinkel | 0,0 | 0,390625 | % | 1 |
| 0x58A1 | - | unsigned char | - | Ausgegeben Tastverhältnis | 0,0 | 0,390625 | % | 1 |
| 0x58A2 | - | signed char | - | VVT Motorstrom | 0,0 | 1,0 | A | 1 |
| 0x58A3 | - | signed char | - | VVT Motortemperatur | 0,0 | 2,0 | °C | 1 |
| 0x58A4 | - | unsigned char | - | VVT Spannungsversorgung | 0,0 | 0,100000001490116 | V | 1 |
| 0x58A5 | - | unsigned char | - | VVT Sensorversorgungsspannung | 0,0 | 0,100000001490116 | V | 1 |
| 0x58A6 | - | unsigned char | - | VVT Sensordifferenz | 0,0 | 0,703125 | ° | 1 |
| 0x58A7 | - | signed char | - | VVT Endstufentemperatur | 0,0 | 2,0 | °C | 1 |
| 0x58A8 | - | unsigned char | - | Motorabstellzeit | 0,0 | 4,0 | min | 1 |
| 0x58A9 | - | unsigned char | - | Reset Zähler Überwachungsrechner | 0,0 | 1,0 | - | 1 |
| 0x58AA | - | unsigned char | - | Reset Zähler Hauptrechner | 0,0 | 1,0 | - | 1 |
| 0x58AB | - | unsigned char | - | Abweichung DK-Ersatzwert und DK-Poti 1 | 0,0 | 5,425863742828365 | mg/stk | 1 |
| 0x58AC | - | unsigned char | - | Abweichung DK-Ersatzwert und DK-Poti 2 | 0,0 | 5,425863742828365 | mg/stk | 1 |
| 0x58AD | - | unsigned char | - | Pedalwertgeber 1 | 0,0 | 0,390625 | % | 1 |
| 0x58AF | - | unsigned char | - | Kraftstoff Anforderung an Pumpe | 0,0 | 1,0 | l/h | 1 |
| 0x58B0 | - | unsigned char | - | DK-Adaptionsschritt | 0,0 | 1,0 | - | 1 |
| 0x58B1 | - | unsigned char | - | Funkenbrenndauer Zylinder 1 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B2 | - | unsigned char | - | Funkenbrenndauer Zylinder 5 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B3 | - | unsigned char | - | Funkenbrenndauer Zylinder 3 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B4 | - | unsigned char | - | Funkenbrenndauer Zylinder 6 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B5 | - | unsigned char | - | Funkenbrenndauer Zylinder 2 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B6 | - | unsigned char | - | Funkenbrenndauer Zylinder 4 | 0,0 | 1,0240000486373915 | ms | 1 |
| 0x58B7 | - | unsigned char | - | Bremsdruck | 0,0 | 1,0 | bar | 1 |
| 0x58B8 | - | unsigned char | - | Drehzahl Überwachung | 0,0 | 32,0 | rpm | 1 |
| 0x58B9 | - | unsigned char | - | Pedalwert Überwachung | 0,0 | 0,390625 | % | 1 |
| 0x58BC | - | unsigned char | - | Luftmasse Überwachung | 0,0 | 5,44705867767334 | mg/stk | 1 |
| 0x58BD | - | unsigned char | - | Modellluftmasse Überwachung tiefpassgefiltert | 0,0 | 5,44705867767334 | mg/stk | 1 |
| 0x58BF | - | unsigned char | - | relative Momentenforderung von MSR über CAN | 0,0 | 0,390625 | % | 1 |
| 0x58C0 | - | unsigned char | - | Motordrehzahl Eratztwert Überwachung | 0,0 | 32,0 | rpm | 1 |
| 0x58C1 | - | unsigned char | - | Laufunruhe Segmentzeit | 0,0 | 256,0 | µs | 1 |
| 0x58C7 | - | unsigned char | - | LL-Solldrehzahlabweichung Überwachung | -4096,0 | 32,0 | rpm | 1 |
| 0x58C8 | - | signed char | - | I-Anteil Momentdifferenz Überwachung und Modell | 0,0 | 8,0 | Nm | 1 |
| 0x58C9 | - | 0xFF | - | I-Anteil LL passive Rampe aktiv | 0 | 1 | 0/1 | 1 |
| 0x58CA | - | signed char | - | PD-Anteil langsam Leerlaufregelung | 0,0 | 8,0 | Nm | 1 |
| 0x58CB | - | signed char | - | PD-Anteil schnell Leerlaufregelung | 0,0 | 8,0 | Nm | 1 |
| 0x58CC | - | signed char | - | Verlustmoment Überwachung | 0,0 | 8,0 | Nm | 1 |
| 0x58CD | - | signed char | - | Verlustmomentabweichung Überwachung | 0,0 | 2,0 | Nm | 1 |
| 0x58CE | - | unsigned char | - | Carrierbyte Schalterstati | 0,0 | 1,0 | - | 1 |
| 0x58CF | - | unsigned char | - | Motormoment Sollwert Überwachung | 0,0 | 2,0 | Nm | 1 |
| 0x58D0 | - | unsigned char | - | Motormoment Istwert Überwachung | 0,0 | 2,0 | Nm | 1 |
| 0x58D1 | - | signed char | - | Moment aktueller Wert | 0,0 | 8,0 | Nm | 1 |
| 0x58D4 | - | signed char | - | Abweichung maximales Moment an Kupplung Überwachung | 0,0 | 2,0 | Nm | 1 |
| 0x58D6 | - | signed char | - | Abweichung minimales Moment an Kupplung Überwachung | 0,0 | 8,0 | Nm | 1 |
| 0x58D9 | - | 0xFF | _CNV_S_14_TMO3_ERR_C_422 | Fehler Hauptrechner | 0 | 1 | 0-n | 1 |
| 0x58DA | - | 0xFF | _CNV_S_21_TMO3_ERR_C_423 | Fehler Überwachungsrechner | 0 | 1 | 0-n | 1 |
| 0x58DB | - | unsigned char | - | Fehler Bitfeld high Byte | 0,0 | 1,0 | - | 1 |
| 0x58DC | - | unsigned char | - | Fehler Bitfeld low Byte | 0,0 | 1,0 | - | 1 |
| 0x58DF | - | unsigned char | - | Spannung Sportschalter | 0,0 | 0,01953125 | V | 1 |
| 0x58E0 | - | unsigned char | - | Abgleich Drosselklappenmodell (Faktor) | 0,0 | 0,0078125 | - | 1 |
| 0x58E1 | - | signed char | - | Abgleich Drosselklappenmodell (Offset) | 0,0 | 8,0 | kg/h | 1 |
| 0x58E2 | - | unsigned char | - | Abgleich Einlassventilmodell (Faktor) | 0,0 | 0,0078125 | - | 1 |
| 0x58E3 | - | signed char | - | Abgleich Einlassventilmodell (Offset) | 0,0 | 8,0 | kg/h | 1 |
| 0x58E4 | - | 0xFF | _CNV_S_7_Def_ba_467 | Betriebsart Istwert | 0 | 1 | 0-n | 1 |
| 0x58E5 | - | unsigned char | - | Maximale Drehzahl bei Zündaussetzern | 0,0 | 32,0 | rpm | 1 |
| 0x58E6 | - | unsigned char | - | Maximale relative Last bei Zündaussetzern | 0,0 | 0,390625 | % | 1 |
| 0x58E7 | - | unsigned char | - | Minimale relative Last bei Zündaussetzern | 0,0 | 0,390625 | % | 1 |
| 0x58E8 | - | unsigned char | - | Minimale Drehzahl bei Zündaussetzern | 0,0 | 32,0 | rpm | 1 |
| 0x58E9 | - | unsigned char | - | Wasserpumpe Spannung | 0,0 | 0,100000001490116 | V | 1 |
| 0x58EA | - | unsigned char | - | Wasserpumpe Drehzahl | 0,0 | 1,0 | - | 1 |
| 0x58EB | - | unsigned char | - | Wasserpumpe Drehzahl Soll-Ist-Differenz | 0,0 | 1,0 | - | 1 |
| 0x58EC | - | unsigned char | - | Wasserpumpe Temperatur Elektronik | -50,0 | 1,0 | °C | 1 |
| 0x58ED | - | unsigned char | - | Wasserpumpe Stromaufnahme | 0,0 | 0,5 | A | 1 |
| 0x58EE | - | unsigned char | - | Wasserpumpe leistungsreduziert | 0,0 | 0,390625 | % | 1 |
| 0x58F1 | - | 0xFF | _CNV_S_8_RANGE_STAT_326 | DME - Losnummer | 0 | 1 | 0-n | 1 |
| 0x58F5 | - | signed char | - | Eingangssignal Rückführregler 1 | -3,60784326466368E-6 | 0,00488278456032276 | V | 1 |
| 0x58F6 | - | signed char | - | Eingangssignal Rückführregler 2 | -3,60784326466368E-6 | 0,00488278456032276 | V | 1 |
| 0x58F8 | - | signed char | - | Segmentadaption Laufunruhe Zyl. 5 | 1,92095835817427E-5 | 0,06103530898690227 | %. | 1 |
| 0x58F9 | - | signed char | - | Segmentadaption Laufunruhe Zyl. 3 | 1,92095835817427E-5 | 0,06103530898690227 | %. | 1 |
| 0x58FA | - | unsigned char | - | Beladungsgrad Aktivkohlefilter TEV- Funktionstest | 0,0 | 0,0078125 | - | 1 |
| 0x58FB | - | unsigned char | - | Zähler Drehzahlerhöhungen TEV- Funktionstest | 0,0 | 1,0 | cyc | 1 |
| 0x5A00 | - | unsigned integer | - | Versorgung FWG 1 | 0,0 | 0,00976559147238731 | V | 1 |
| 0x5A01 | - | unsigned integer | - | Versorgung FWG 2 | 0,0 | 0,00976559147238731 | V | 1 |
| 0x5A02 | - | unsigned integer | - | Versorgung VVT Rohwert | 0,0 | 0,0048828125 | V | 1 |
| 0x5A03 | - | unsigned integer | - | Versorgung VVT | 0,0 | 0,0078125 | V | 1 |
| 0x5A04 | - | unsigned integer | - | Spannung Pedalwertgeber 1 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A05 | - | unsigned integer | - | Spannung Pedalwertgeber 2 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A06 | - | unsigned integer | - | Spannung Drosselklappe Poti 1 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A07 | - | unsigned integer | - | Spannung Drosselklappe Poti 2 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A08 | - | unsigned char | - | Spannung Ansauglufttemperatur | 0,0 | 0,0196000002324581 | - | 1 |
| 0x5A09 | - | unsigned integer | - | Spannung Motortemperatur | 0,0 | 0,0048828125 | V | 1 |
| 0x5A0A | - | unsigned integer | - | Spannung Kühlmitteltemperatur Kühlerausgang | 0,0 | 0,0048828125 | V | 1 |
| 0x5A0B | - | unsigned integer | - | Spannung DME Umgebungsdruck | 0,0 | 0,0048828125 | V | 1 |
| 0x5A0C | - | unsigned char | - | Spannung Luftmasse | 0,0 | 0,0196000002324581 | V | 1 |
| 0x5A0D | - | unsigned char | - | Spannung Sekundärluft | 0,0 | 0,0196000002324581 | V | 1 |
| 0x5A0E | - | unsigned integer | - | Spannung SG-Innentemperatur | 0,0 | 0,0048828125 | V | 1 |
| 0x5A0F | - | unsigned integer | - | Spannung Kl.15 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A10 | - | unsigned integer | - | Spannung Kl15 | 0,0 | 0,0280601158738136 | V | 1 |
| 0x5A11 | - | unsigned integer | - | Spannung Lambdasonde vor Kat 1 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A12 | - | unsigned integer | - | Spannung Lambdasonde vor Kat 2 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A13 | - | unsigned integer | - | Spannung Lambdasonde hinter Kat 1 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A14 | - | unsigned integer | - | Spannung Lambdasonde hinter Kat 2 | 0,0 | 0,0048828125 | V | 1 |
| 0x5A17 | - | unsigned integer | - | Spannung Strommessung DMTL | 0,0 | 0,0048828125 | V | 1 |
| 0x5A21 | - | unsigned char | - | Kühlmitteltemperatur Kühlerausgang | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5A22 | - | unsigned char | - | Steuergerät Innentemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5A24 | - | unsigned integer | - | Drosselklappe Sollwert | 0,0 | 0,00729414634406567 | °TPS | 1 |
| 0x5A26 | - | unsigned integer | - | Umgebungsdruck | 0,0 | 0,0829175263643265 | hPa | 1 |
| 0x5A27 | - | unsigned char | - | Pedalwertgeber Poti 1 | 0,0 | 0,390625 | % | 1 |
| 0x5A28 | - | unsigned char | - | Pedalwertgeber Poti 2 | 0,0 | 0,390625 | % | 1 |
| 0x5A29 | - | unsigned char | - | Fahrpedalwert | 0,0 | 0,390625 | % | 1 |
| 0x5A2A | - | unsigned integer | - | Luftmasse Sekundärluft | 0,0 | 0,015625 | kg/h | 1 |
| 0x5A30 | - | signed integer | - | Laufunruhe Zylinder 1 | 0,0 | 1,0 | µs | 1 |
| 0x5A31 | - | signed integer | - | Laufunruhe Zylinder 2 | 0,0 | 1,0 | µs | 1 |
| 0x5A32 | - | signed integer | - | Laufunruhe Zylinder 3 | 0,0 | 1,0 | µs | 1 |
| 0x5A33 | - | signed integer | - | Laufunruhe Zylinder 4 | 0,0 | 1,0 | µs | 1 |
| 0x5A34 | - | signed integer | - | Laufunruhe Zylinder 5 | 0,0 | 1,0 | µs | 1 |
| 0x5A35 | - | signed integer | - | Laufunruhe Zylinder 6 | 0,0 | 1,0 | µs | 1 |
| 0x5A36 | - | 0xFF | - | Status Klopfen | 0 | 1 | 0/1 | 1 |
| 0x5A37 | - | unsigned integer | - | Spannung Klopfwerte Zylinder 1 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A38 | - | unsigned integer | - | Spannung Klopfwerte Zylinder 2 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A39 | - | unsigned integer | - | Spannung Klopfwerte Zylinder 3 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A3A | - | unsigned integer | - | Spannung Klopfwerte Zylinder 4 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A3B | - | unsigned integer | - | Spannung Klopfwerte Zylinder 5 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A3C | - | unsigned integer | - | Spannung Klopfwerte Zylinder 6 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A3D | - | unsigned integer | - | Klopfsignal Zylinder 1 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A3E | - | unsigned integer | - | Klopfsignal Zylinder 1 relativ | 0,0 | 1,52587890625E-5 | - | 1 |
| 0x5A3F | - | unsigned integer | - | Klopfsignal Zylinder 6 | 0,0 | 7,62939453125E-5 | V | 1 |
| 0x5A40 | - | unsigned integer | - | Klopfsignal Zylinder 6 relativ | 0,0 | 1,52587890625E-5 | - | 1 |
| 0x5A42 | - | unsigned integer | - | Einspritzzeit Zylinder 1 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A43 | - | unsigned integer | - | Einspritzzeit Zylinder 2 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A44 | - | unsigned integer | - | Einspritzzeit Zylinder 3 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A45 | - | unsigned integer | - | Einspritzzeit Zylinder 4 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A46 | - | unsigned integer | - | Einspritzzeit Zylinder 5 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A47 | - | unsigned integer | - | Einspritzzeit Zylinder 6 | 0,0 | 0,00400000018998981 | ms | 1 |
| 0x5A49 | - | unsigned char | - | Zündwinkel Zylinder 1 | -35,6249989382923 | 0,375 | °CRK | 1 |
| 0x5A4B | - | unsigned char | - | Berechneter Lastwert | 0,0 | 0,390625 | % | 1 |
| 0x5A4E | - | 0xFF | - | Klimakompressorrelais Ein | 0 | 1 | 0/1 | 1 |
| 0x5A4F | - | 0xFF | - | VVT- Entlastungsrelais Ein | 0 | 1 | 0/1 | 1 |
| 0x5A50 | - | unsigned integer | - | Lambdawert vor Kat Bank 1 | 0,0 | 9,765625E-4 | - | 1 |
| 0x5A51 | - | unsigned integer | - | Lambdawert vor Kat Bank 2 | 0,0 | 9,765625E-4 | - | 1 |
| 0x5A52 | - | 0xFF | - | Status LS nach Kat Bank 1 | 0 | 1 | 0/1 | 1 |
| 0x5A53 | - | 0xFF | - | Status LS nach Kat Bank 2 | 0 | 1 | 0/1 | 1 |
| 0x5A54 | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | Status LS Heizung nach Kat Bank 1 | 0 | 1 | 0-n | 1 |
| 0x5A55 | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | Status LS Heizung nach Kat Bank 2 | 0 | 1 | 0-n | 1 |
| 0x5A56 | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | Status LS Heizung vor Kat Bank 1 | 0 | 1 | 0-n | 1 |
| 0x5A57 | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | Status LS Heizung vor Kat Bank 2 | 0 | 1 | 0-n | 1 |
| 0x5A58 | - | unsigned char | - | Lambdasondenheizung PWM vor Kat Bank 1 | 0,0 | 0,390625 | % | 1 |
| 0x5A59 | - | unsigned char | - | Lambdasondenheizung PWM nach Kat Bank 1 | 0,0 | 0,390625 | % | 1 |
| 0x5A5A | - | unsigned char | - | Lambdasondenheizung PWM vor Kat Bank 2 | 0,0 | 0,390625 | % | 1 |
| 0x5A5B | - | unsigned char | - | Lambdasondenheizung PWM nach Kat Bank 2 | 0,0 | 0,390625 | % | 1 |
| 0x5A60 | - | 0xFF | - | Bremslichtschalter Ein | 0 | 1 | 0/1 | 1 |
| 0x5A61 | - | 0xFF | - | Bremslichttestschalter Ein | 0 | 1 | 0/1 | 1 |
| 0x5A62 | - | 0xFF | - | Öldruckschalter Ein | 0 | 1 | 0/1 | 1 |
| 0x5A63 | - | 0xFF | - | E-Boxlüfter Ein | 0 | 1 | 0/1 | 1 |
| 0x5A64 | - | 0xFF | - | Kühlerjalousie | 0 | 1 | 0/1 | 1 |
| 0x5A65 | - | 0xFF | - | Abgasklappe Ein | 0 | 1 | 0/1 | 1 |
| 0x5A66 | - | 0xFF | - | DMTL Pumpe Ein | 0 | 1 | 0/1 | 1 |
| 0x5A67 | - | 0xFF | - | DMTL Ventil Ein | 0 | 1 | 0/1 | 1 |
| 0x5A68 | - | 0xFF | - | DMTL Heizung Ein | 0 | 1 | 0/1 | 1 |
| 0x5A69 | - | 0xFF | - | MIL Lampe Ein | 0 | 1 | 0/1 | 1 |
| 0x5A6A | - | 0xFF | - | Lampe FGR Ein | 0 | 1 | 0/1 | 1 |
| 0x5A6B | - | 0xFF | - | Lampe Check Engine Ein | 0 | 1 | 0/1 | 1 |
| 0x5A6D | - | 0xFF | _CNV_S_8_RANGE_STAT_19 | Status Taste FGR | 0 | 1 | 0-n | 1 |
| 0x5A70 | - | 0xFF | - | Soundklappe Zustand | 0 | 1 | 0/1 | 1 |
| 0x5A71 | - | signed integer | - | DISA1 PWM (große/obere Klappe) | 0,0 | 0,0030517578125 | % | 1 |
| 0x5A72 | - | signed integer | - | DISA2 PWM (kleine/untere Klappe) | 0,0 | 0,0030517578125 | % | 1 |
| 0x5A73 | - | 0xFF | - | Kurbelgehäuseentlüftungsheizung | 0 | 1 | 0/1 | 1 |
| 0x5A74 | - | unsigned integer | - | Beheizter Thermostat PWM | 0,0 | 0,00152587890625 | % | 1 |
| 0x5A75 | - | 0xFF | - | Sekundärluft Ventil | 0 | 1 | 0/1 | 1 |
| 0x5A76 | - | unsigned integer | - | Adaption Öffnungspunkt Tankentlüftungsventil | 0,0 | 0,00152587890625 | % | 1 |
| 0x5A77 | - | unsigned char | - | TankEntlüftungsVentil TEV PWM | 0,0 | 0,390625 | % | 1 |
| 0x5A78 | - | 0xFF | - | Abgasklappe Ansteuerung | 0 | 1 | 0/1 | 1 |
| 0x5A79 | - | unsigned char | - | E-Lüfter PWM | 0,0 | 0,390625 | % | 1 |
| 0x5A7A | - | unsigned integer | - | VANOS PWM Wert Einlass | 0,0 | 0,00152587890625 | % | 1 |
| 0x5A7B | - | unsigned integer | - | VANOS PWM Wert Auslass | 0,0 | 0,00152587890625 | % | 1 |
| 0x5A81 | - | signed integer | - | Integrator Bank 1 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A82 | - | signed integer | - | Integrator Bank 2 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A83 | - | signed integer | - | Adaption Offset Lambda Bank 1 | 3,08424652517705E-13 | 0,0211947802454233 | mg/stk | 1 |
| 0x5A84 | - | signed integer | - | Adaption Offset Lambda Bank 2 | 3,08424652517705E-13 | 0,0211947802454233 | mg/stk | 1 |
| 0x5A85 | - | signed integer | - | Adaption Multiplikation Lambda Bank 1 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A86 | - | signed integer | - | Adaption Multiplikation Lambda Bank 2 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A87 | - | signed integer | - | Adaptionswert Trimregelung Bank 1 | 0,0 | 6,103515625E-5 | - | 1 |
| 0x5A88 | - | signed integer | - | Adaptionswert Trimregelung Bank 2 | 0,0 | 6,103515625E-5 | - | 1 |
| 0x5A89 | - | signed integer | - | multiplikative Gemischadaption hohe Last Bank 1 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A8A | - | signed integer | - | multiplikative Gemischadaption hohe Last Bank 2 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A8B | - | signed integer | - | multiplikative Gemischadaption niedrige Last Bank 1 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A8C | - | signed integer | - | multiplikative Gemischadaption niedrige Last Bank 2 | 2,22044609888115E-14 | 0,00152587890625 | % | 1 |
| 0x5A8D | - | signed integer | - | additive Gemischadaption Leerlauf Bank 1 | 3,08424652517705E-13 | 0,0211947802454233 | mg/stk | 1 |
| 0x5A8E | - | signed integer | - | additive Gemischadaption Leerlauf Bank 2 | 3,08424652517705E-13 | 0,0211947802454233 | mg/stk | 1 |
| 0x5A91 | - | unsigned char | - | Katalysatordiagnosewert Bank 1 | 0,0 | 0,015625 | - | 1 |
| 0x5A92 | - | unsigned char | - | Katalysatordiagnosewert Bank 2 | 0,0 | 0,015625 | - | 1 |
| 0x5A94 | - | unsigned char | - | Nockenwelle Auslass Sollwert | -39,9999978542329 | -0,375 | °CRK | 1 |
| 0x5A95 | - | unsigned char | - | Adaptionswert Nockenwelle Auslaß | -47,9999985694886 | 0,375 | °CRK | 1 |
| 0x5A96 | - | unsigned char | - | Adaptionswert Nockenwelle Einlaß | -47,9999985694886 | 0,375 | °CRK | 1 |
| 0x5A97 | - | 0xFF | - | Bedingung EVANOS im Anschlag beim letzten Abstellen | 0 | 1 | 0/1 | 1 |
| 0x5A99 | - | 0xFF | - | Kurbelwellen Adaption beendet | 0 | 1 | 0/1 | 1 |
| 0x5AA1 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose TEV | 0 | 1 | 0-n | 1 |
| 0x5AA2 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose DMTL | 0 | 1 | 0-n | 1 |
| 0x5AA3 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose Lambdasonden | 0 | 1 | 0-n | 1 |
| 0x5AA4 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose Leerlaufdrehzahlverstellung | 0 | 1 | 0-n | 1 |
| 0x5AA5 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose Sekundärluft | 0 | 1 | 0-n | 1 |
| 0x5AA6 | - | 0xFF | _CNV_S_10_STATE_EOL__354 | Status Diagnose VVT Anschläge lernen | 0 | 1 | 0-n | 1 |
| 0x5AB1 | - | unsigned char | - | Geschwindigkeit | 0,0 | 1,0 | km/h | 1 |
| 0x5AB3 | - | unsigned integer | - | Fahrstrecke mit MIL an | 0,0 | 1,0 | km | 1 |
| 0x5AB4 | - | unsigned long | - | Betriebsstundenzähler | 0,0 | 2,77777780866018E-5 | h | 1 |
| 0x5AB5 | - | 0xFF | - | Variante Sekundärluftpumpe | 0 | 1 | 0/1 | 1 |
| 0x5AB6 | - | unsigned char | - | Rohwert Ansauglufttemperatur 1 | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5AB7 | - | unsigned char | - | Rohwert Kühlwassertemperatur | -47,9999985694886 | 0,75 | °C | 1 |
| 0x5AB8 | - | unsigned integer | - | Spannung Saugrohrdruck | 0,0 | 0,0048828125 | V | 1 |
| 0x5AB9 | - | unsigned integer | - | Spannung Sportschalter | 0,0 | 0,0048828125 | V | 1 |
| 0x5ABA | - | unsigned char | - | PWM Kraftstoffpumpe | 0,0 | 0,390625 | % | 1 |
| 0x5ABB | - | unsigned integer | - | Ausgewählter VVT Istwinkel | 0,0 | 0,01220703125 | % | 1 |
| 0x5ABC | - | unsigned integer | - | Luftmasse | 0,0 | 0,03125 | kg/h | 1 |
| 0x5ABD | - | 0xFF | - | Starterrelais aktiv | 0 | 1 | 0/1 | 1 |
| 0x5AC0 | - | unsigned integer | - | Reset Status Hardware-Register | 0,0 | 1,0 | - | 1 |
| 0x5AC1 | - | unsigned long | - | Reset Status Software-Register | 0,0 | 1,0 | - | 1 |
| 0x5AC2 | - | unsigned long | - | Reset Adresse | 0,0 | 1,0 | - | 1 |
| 0x5AC3 | - | unsigned integer | - | Fehler Segmentzähler | 0,0 | 1,0 | - | 1 |
| 0x5AE0 | - | unsigned integer | - | TM_1 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE1 | - | unsigned integer | - | TM_2 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE2 | - | unsigned integer | - | TM_3 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE3 | - | unsigned integer | - | TM_4 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE4 | - | unsigned integer | - | TM_5 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE5 | - | unsigned integer | - | TO_1 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE6 | - | unsigned integer | - | TO_2 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE7 | - | unsigned integer | - | TO_3 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE8 | - | unsigned integer | - | TO_4 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AE9 | - | unsigned integer | - | TO_5 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AEA | - | unsigned integer | - | TG_1 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AEB | - | unsigned integer | - | TG_2 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AEC | - | unsigned integer | - | TG_3 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AED | - | unsigned integer | - | TG_4 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AEE | - | unsigned integer | - | TG_5 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AEF | - | unsigned integer | - | TU_1 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AF0 | - | unsigned integer | - | TU_2 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AF1 | - | unsigned integer | - | TU_3 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AF2 | - | unsigned integer | - | TU_4 | 0,0 | 0,00152587890625 | % | 1 |
| 0x5AF3 | - | unsigned integer | - | TU_5 | 0,0 | 0,00152587890625 | % | 1 |
| 0x58FF | - | unsigned char | - | Umweltbedingung unbekannt | 0 | 1 | - | 1 |
_CNV_S_10_STATE_EOL__354
Dimensions: 11 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | ACT |
| 0x01 | ST_INH |
| 0x02 | PAR_NOT_PLAUS |
| 0x03 | WAIT_REL |
| 0x04 | UNDEF |
| 0x05 | NOT_START |
| 0x06 | END_WOUT_RESULT |
| 0x07 | ABORTED |
| 0x08 | END_WOUT_ERR |
| 0x09 | END_WITH_ERR |
| 0xFF | undefiniert |
_CNV_S_11_EGCP_RANGE_728
Dimensions: 12 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | NO_FAULT |
| 0x01 | SCG_LINE_RCD |
| 0x02 | SCG_LINE_VIP |
| 0x03 | SCG_LINE_VG |
| 0x04 | SCG_LINE_VN |
| 0x05 | SCG |
| 0x06 | SCBAT_LINE_RCD |
| 0x07 | SCBAT_LINE_VIP |
| 0x08 | SCBAT_LINE_VG |
| 0x09 | SCBAT_LINE_VN |
| 0x0A | SCBAT |
| 0xFF | undefiniert |
_CNV_S_14_TMO3_ERR_C_422
Dimensions: 15 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | OK |
| 0x01 | COMM_CKS_ERR |
| 0x02 | COMM_HD_ERR |
| 0x03 | PRDR_CHK_ERR |
| 0x04 | SW_VERS_ERR |
| 0x05 | SW_VAR_ERR |
| 0x06 | ABC_MON2_MU_ERR |
| 0x07 | IDX_MON2_MU_ERR |
| 0x08 | SYN_PFM_MU_ERR |
| 0x09 | ROM_LVL2_ERR |
| 0x0A | RAM_LVL2_ERR |
| 0x0B | ROM_LVL1_ERR |
| 0x0C | RAM_LVL1_ERR |
| 0x0D | RST_LOOP_ERR |
| 0xFF | undefiniert |
_CNV_S_21_TMO3_ERR_C_423
Dimensions: 22 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | OK |
| 0x01 | COMM_HD_ERR |
| 0x02 | COMM_CKS_ERR |
| 0x03 | PIN_CONF_ERR |
| 0x04 | SW_VERS_ERR |
| 0x05 | COMM_TOUT_MAX_ERR |
| 0x06 | COMM_TOUT_MIN_ERR |
| 0x07 | RAM_CHK_MU_ERR |
| 0x08 | ROM_CHK_MU_ERR |
| 0x09 | RESP_MON2_MC_ERR |
| 0x0A | RED_SWI_OFF_PATH |
| 0x0B | PFM_1_MC_ERR |
| 0x0C | PFM_2_MC_ERR |
| 0x0D | PFM_3_MC_ERR |
| 0x0E | PFM_4_MC_ERR |
| 0x0F | PFM_5_MC_ERR |
| 0x10 | PFM_6_MC_ERR |
| 0x11 | PFM_7_MC_ERR |
| 0x12 | PFM_8_MC_ERR |
| 0x13 | WDG_MU_ERR |
| 0x14 | ENA_BYTE_ERR |
| 0xFF | undefiniert |
_CNV_S_3_STATE_RLY__374
Dimensions: 4 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | Request cannot be executed |
| 0x01 | relay open |
| 0x02 | relay close |
| 0xFF | undefiniert |
_CNV_S_4_EGCP_RANGE_732
Dimensions: 5 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | NO_SYM |
| 0x01 | TTIP_ERR |
| 0x02 | READY_ERR |
| 0x04 | TTIP_MES_ERR |
| 0xFF | undefiniert |
_CNV_S_4_EGCP_RANGE_739
Dimensions: 5 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | VLS_OK |
| 0x01 | VLS_L |
| 0x02 | VLS_H_OC |
| 0x03 | VLS_AFS_OC |
| 0xFF | undefiniert |
_CNV_S_5_LACO_RANGE_765
Dimensions: 6 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x01 | 1:OL_CDN |
| 0x02 | 2:CL |
| 0x04 | 4:OL_INTR |
| 0x08 | 8:OL_ERR |
| 0x10 | 10:CL_ERR |
| 0xFF | undefiniert |
_CNV_S_6_RANGE_STAT_106
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | PASSIVE |
| 0x01 | CONST_DRIVE |
| 0x03 | RESUME |
| 0x05 | SET_ACC |
| 0x07 | RETARD |
| 0x09 | TIP |
| 0xFF | undefiniert |
_CNV_S_6_RANGE_STAT_146
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | ES |
| 0x01 | ST |
| 0x02 | IS |
| 0x03 | PL |
| 0x04 | PU |
| 0x05 | PUC |
| 0xFF | undefiniert |
_CNV_S_6_RANGE_STAT_305
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | ETC_NO_LIH |
| 0x01 | ETC_LIH_1 |
| 0x02 | ETC_LIH_2_REV |
| 0x04 | ETC_LIH_2 |
| 0x08 | ETC_LIH_3 |
| 0x10 | ETC_LIH_4 |
| 0xFF | undefiniert |
_CNV_S_7_DEF_BA_467
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | KEINE |
| 0x01 | UGD |
| 0x02 | GD |
| 0x03 | GD_KLEINER_HUB |
| 0x06 | DKNOTL |
| 0x07 | VVTNOTL1 |
| 0x08 | VVTNOTL |
| 0xFF | undefiniert |
_CNV_S_7_EGCP_RANGE_710
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | LSH_OFF |
| 0x01 | LSH_POW_RISE |
| 0x02 | LSH_POW_RED |
| 0x03 | LSH_POW_FALL |
| 0x04 | LSH_POW_CTL |
| 0x05 | LSH_VB_PROT |
| 0x06 | LSH_TEMP_PROT |
| 0xFF | undefiniert |
_CNV_S_7_RANGE_ECU__142
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | ENG_STOP |
| 0x01 | RUN_ENG |
| 0x02 | SYN_ENG_IGK_ON |
| 0x03 | SYN_ENG_IGK_OFF |
| 0x04 | PWL |
| 0x05 | ENG_LOCK |
| 0x06 | WAKE_UP |
| 0xFF | undefiniert |
_CNV_S_8_RANGE_STAT_19
Dimensions: 9 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | None |
| 0x01 | Set-Acc-TipUp |
| 0x02 | Decelerate-TipDown |
| 0x03 | Resume |
| 0x04 | Off |
| 0x05 | - |
| 0x06 | - |
| 0x07 | Error |
| 0xFF | undefiniert |
_CNV_S_8_RANGE_STAT_326
Dimensions: 9 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x0000 | VAR_ECU_ROM_NOT_PLAUS |
| 0x5A5A | VAR_ECU_LOT1 |
| 0xA5A5 | VAR_ECU_LOT2 |
| 0xAEAE | VAR_ECU_LOT4 |
| 0xBCBC | VAR_ECU_SERIAL_ECU |
| 0xCBCB | VAR_ECU_LOT6 |
| 0xEAEA | VAR_ECU_LOT3 |
| 0xFFFF | VAR_ECU_NOT_LEARNED |
| 0xFFFF | undefiniert |
FUMWELTMATRIX
Dimensions: 321 rows × 5 columns
| ORT | UW1_NR | UW2_NR | UW3_NR | UW4_NR |
|---|---|---|---|---|
| 0x0000 | 0x58FF | 0x58FF | 0x58FF | 0x58FF |
| 0x29CC | 0x5824 | 0x5834 | 0x583C | 0x586D |
| 0x29CD | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29CE | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29CF | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29D0 | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29D1 | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29D2 | 0x581F | 0x58E5 | 0x58E6 | 0x58E7 |
| 0x29D9 | 0x5811 | 0x586D | 0x581F | 0x583B |
| 0x29DA | 0x5811 | 0x583C | 0x58F8 | 0x58F9 |
| 0x29DB | 0x5811 | 0x581F | 0x5818 | 0x583C |
| 0x29DC | 0x581F | 0x5818 | 0x5811 | 0x583B |
| 0x29E0 | 0x581F | 0x5818 | 0x5811 | 0x5855 |
| 0x29E1 | 0x581F | 0x5818 | 0x5811 | 0x5856 |
| 0x29F4 | 0x5811 | 0x5818 | 0x581F | 0x581E |
| 0x29F5 | 0x5811 | 0x5818 | 0x581F | 0x581E |
| 0x29FF | 0x5824 | 0x5882 | 0x5877 | 0x5876 |
| 0x2A00 | 0x5824 | 0x5882 | 0x5811 | 0x583C |
| 0x2A01 | 0x5824 | 0x5882 | 0x5811 | 0x5812 |
| 0x2A02 | 0x5811 | 0x5821 | 0x5832 | 0x583C |
| 0x2A03 | 0x5811 | 0x5821 | 0x5832 | 0x583C |
| 0x2A04 | 0x5824 | 0x5882 | 0x5877 | 0x583C |
| 0x2A07 | 0x5824 | 0x5882 | 0x5811 | 0x583C |
| 0x2A12 | 0x5834 | 0x5874 | 0x587C | 0x583C |
| 0x2A13 | 0x5834 | 0x5874 | 0x587C | 0x583C |
| 0x2A15 | 0x583B | 0x5859 | 0x585A | 0x588D |
| 0x2A16 | 0x583B | 0x5859 | 0x585B | 0x588D |
| 0x2A17 | 0x583B | 0x5859 | 0x5867 | 0x5824 |
| 0x2A18 | 0x5834 | 0x5874 | 0x587C | 0x583C |
| 0x2A19 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A1A | 0x581F | 0x5818 | 0x5811 | 0x584D |
| 0x2A1B | 0x583B | 0x5859 | 0x585B | 0x588D |
| 0x2A1C | 0x580D | 0x5815 | 0x583B | 0x5867 |
| 0x2A2E | 0x581F | 0x5818 | 0x5811 | 0x58E2 |
| 0x2A2F | 0x581F | 0x5818 | 0x5811 | 0x58E2 |
| 0x2A30 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A31 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A32 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A33 | 0x5811 | 0x58A5 | 0x589F | 0x58A6 |
| 0x2A34 | 0x5811 | 0x58A5 | 0x589F | 0x58A6 |
| 0x2A35 | 0x5811 | 0x58A5 | 0x589F | 0x58A6 |
| 0x2A36 | 0x5811 | 0x58A5 | 0x589F | 0x58A6 |
| 0x2A37 | 0x58A5 | 0x589F | 0x58A6 | 0x581F |
| 0x2A38 | 0x5811 | 0x58A2 | 0x589F | 0x58A0 |
| 0x2A39 | 0x58A2 | 0x583C | 0x58A7 | 0x5824 |
| 0x2A3A | 0x583C | 0x58A7 | 0x581F | 0x5824 |
| 0x2A3B | 0x5811 | 0x583C | 0x589F | 0x58A0 |
| 0x2A3C | 0x589E | 0x58A4 | 0x58A5 | 0x58A7 |
| 0x2A3D | 0x5811 | 0x583C | 0x58A4 | 0x58A7 |
| 0x2A3E | 0x5811 | 0x583C | 0x58A4 | 0x58A2 |
| 0x2A3F | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A40 | 0x5811 | 0x583C | 0x58A4 | 0x58A2 |
| 0x2A41 | 0x5811 | 0x58A7 | 0x58A2 | 0x580D |
| 0x2A42 | 0x58A4 | 0x589F | 0x58A0 | 0x58A1 |
| 0x2A43 | 0x5811 | 0x580D | 0x58A7 | 0x58A2 |
| 0x2A44 | 0x58A4 | 0x58A2 | 0x58A3 | 0x58A1 |
| 0x2A45 | 0x58A7 | 0x58A2 | 0x589F | 0x58A0 |
| 0x2A46 | 0x5811 | 0x5813 | 0x581F | 0x580B |
| 0x2A47 | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0x2A80 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A82 | 0x5811 | 0x581A | 0x581B | 0x581F |
| 0x2A85 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A87 | 0x5811 | 0x581C | 0x581D | 0x581F |
| 0x2A94 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A95 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A96 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A97 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A98 | 0x5811 | 0x5832 | 0x5822 | 0x583C |
| 0x2A99 | 0x5811 | 0x5832 | 0x5822 | 0x583C |
| 0x2A9A | 0x5811 | 0x5832 | 0x5822 | 0x583C |
| 0x2A9B | 0x5811 | 0x5832 | 0x5822 | 0x583C |
| 0x2A9E | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2A9F | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2AA0 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2AA1 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2AA2 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2AA3 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2AA8 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2AA9 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2AAA | 0x5811 | 0x581F | 0x5832 | 0x587C |
| 0x2AAB | 0x583C | 0x580C | 0x5818 | 0x5824 |
| 0x2AAC | 0x583C | 0x580C | 0x5818 | 0x5824 |
| 0x2AAD | 0x5832 | 0x583C | 0x587C | 0x58AF |
| 0x2AAE | 0x5832 | 0x583C | 0x587C | 0x58AF |
| 0x2AB2 | 0x5811 | 0x5821 | 0x587C | 0x583C |
| 0x2AB3 | 0x5811 | 0x5821 | 0x587C | 0x583C |
| 0x2AB4 | 0x5811 | 0x5821 | 0x587C | 0x583C |
| 0x2AB5 | 0x5811 | 0x5821 | 0x587C | 0x583C |
| 0x2AB6 | 0x5811 | 0x5821 | 0x587C | 0x583C |
| 0x2AC1 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2AC6 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2ACB | 0x588B | 0x584A | 0x587C | 0x583C |
| 0x2ACC | 0x5843 | 0x584A | 0x587C | 0x583C |
| 0x2AD0 | 0x5832 | 0x5881 | 0x587C | 0x583C |
| 0x2ADF | 0x5811 | 0x5812 | 0x5813 | 0x5814 |
| 0x2AE0 | 0x5811 | 0x5812 | 0x5882 | 0x5815 |
| 0x2AE1 | 0x5811 | 0x5818 | 0x580E | 0x58D1 |
| 0x2AE4 | 0x5824 | 0x583A | 0x588B | 0x587C |
| 0x2C24 | 0x5805 | 0x588B | 0x5845 | 0x5848 |
| 0x2C27 | 0x588C | 0x5849 | 0x5871 | 0x5845 |
| 0x2C28 | 0x588F | 0x584B | 0x5873 | 0x5848 |
| 0x2C2B | 0x588C | 0x5849 | 0x5871 | 0x5845 |
| 0x2C2C | 0x588F | 0x584B | 0x5873 | 0x5848 |
| 0x2C2D | 0x580B | 0x5845 | 0x587D | 0x588C |
| 0x2C2E | 0x580B | 0x5848 | 0x587E | 0x588F |
| 0x2C31 | 0x5849 | 0x5845 | 0x5878 | 0x58F5 |
| 0x2C32 | 0x584B | 0x5848 | 0x5879 | 0x58F6 |
| 0x2C37 | 0x5815 | 0x5845 | 0x583B | 0x588C |
| 0x2C38 | 0x5815 | 0x5848 | 0x583B | 0x588F |
| 0x2C39 | 0x582E | 0x5845 | 0x5830 | 0x588C |
| 0x2C3A | 0x582F | 0x5848 | 0x5831 | 0x588F |
| 0x2C3B | 0x588B | 0x5849 | 0x5845 | 0x588C |
| 0x2C3C | 0x588B | 0x584B | 0x5848 | 0x588F |
| 0x2C3D | 0x5871 | 0x589B | 0x5845 | 0x588C |
| 0x2C3E | 0x5873 | 0x589C | 0x5848 | 0x588F |
| 0x2C3F | 0x5837 | 0x5815 | 0x5845 | 0x5827 |
| 0x2C40 | 0x5838 | 0x5815 | 0x5848 | 0x5828 |
| 0x2C41 | 0x589B | 0x582C | 0x5845 | 0x5815 |
| 0x2C42 | 0x589C | 0x582D | 0x5848 | 0x5815 |
| 0x2C6A | 0x581F | 0x588B | 0x5849 | 0x584B |
| 0x2C6B | 0x5845 | 0x585C | 0x5811 | 0x5849 |
| 0x2C6C | 0x5848 | 0x585D | 0x5811 | 0x584B |
| 0x2C6D | 0x5896 | 0x585C | 0x5811 | 0x5849 |
| 0x2C6E | 0x5897 | 0x585D | 0x5811 | 0x584B |
| 0x2C6F | 0x5896 | 0x5849 | 0x5816 | 0x5845 |
| 0x2C70 | 0x5897 | 0x584B | 0x5816 | 0x5848 |
| 0x2C73 | 0x5896 | 0x585C | 0x5849 | 0x588B |
| 0x2C74 | 0x5897 | 0x585D | 0x584B | 0x588B |
| 0x2C75 | 0x5896 | 0x585C | 0x5849 | 0x588B |
| 0x2C76 | 0x5897 | 0x585D | 0x584B | 0x588B |
| 0x2C77 | 0x5896 | 0x585C | 0x5849 | 0x588B |
| 0x2C78 | 0x5897 | 0x585D | 0x584B | 0x588B |
| 0x2C79 | 0x5896 | 0x585C | 0x5806 | 0x5849 |
| 0x2C7A | 0x5897 | 0x585D | 0x5808 | 0x584B |
| 0x2C7B | 0x5896 | 0x585C | 0x5849 | 0x5845 |
| 0x2C7C | 0x5897 | 0x585D | 0x584B | 0x5848 |
| 0x2C7E | 0x5849 | 0x5845 | 0x5878 | 0x58F5 |
| 0x2C7F | 0x584B | 0x5848 | 0x5879 | 0x58F6 |
| 0x2C9C | 0x588C | 0x588B | 0x5815 | 0x5827 |
| 0x2C9D | 0x588F | 0x588B | 0x5815 | 0x5828 |
| 0x2C9E | 0x5896 | 0x585C | 0x5849 | 0x5829 |
| 0x2C9F | 0x5897 | 0x585D | 0x584B | 0x582A |
| 0x2CA6 | 0x5894 | 0x5815 | 0x5827 | 0x588C |
| 0x2CA7 | 0x5895 | 0x5815 | 0x5828 | 0x588F |
| 0x2CA8 | 0x5896 | 0x585C | 0x5829 | 0x5849 |
| 0x2CA9 | 0x5897 | 0x585D | 0x582A | 0x584B |
| 0x2CEC | 0x5858 | 0x583F | 0x5843 | 0x583C |
| 0x2CED | 0x5858 | 0x583F | 0x5843 | 0x583C |
| 0x2CEE | 0x5858 | 0x583F | 0x5843 | 0x583C |
| 0x2CEF | 0x5858 | 0x583F | 0x587C | 0x583C |
| 0x2CF6 | 0x58AB | 0x5812 | 0x584C | 0x584E |
| 0x2CF7 | 0x58AC | 0x5812 | 0x584C | 0x584E |
| 0x2CF9 | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2CFA | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2CFB | 0x584E | 0x584C | 0x58B0 | 0x583C |
| 0x2CFC | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2CFD | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2CFE | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2D06 | 0x5811 | 0x589F | 0x5899 | 0x5812 |
| 0x2D07 | 0x584E | 0x584C | 0x5843 | 0x583C |
| 0x2D09 | 0x5811 | 0x581E | 0x581F | 0x587C |
| 0x2D0F | 0x584F | 0x5811 | 0x5858 | 0x589F |
| 0x2D1B | 0x5846 | 0x5847 | 0x5843 | 0x583C |
| 0x2D1C | 0x5846 | 0x5847 | 0x5854 | 0x583C |
| 0x2D1D | 0x5843 | 0x5854 | 0x5846 | 0x583C |
| 0x2D1E | 0x5843 | 0x5854 | 0x5847 | 0x583C |
| 0x2D1F | 0x5843 | 0x5854 | 0x5846 | 0x5847 |
| 0x2D20 | 0x5846 | 0x5847 | 0x5843 | 0x5814 |
| 0x2D28 | 0x580B | 0x5811 | 0x581F | 0x587C |
| 0x2D29 | 0x5811 | 0x5826 | 0x580B | 0x5812 |
| 0x2D2A | 0x581E | 0x581F | 0x5820 | 0x583C |
| 0x2D50 | 0x58B8 | 0x580D | 0x58B7 | 0x5881 |
| 0x2D51 | 0x58BD | 0x5818 | 0x58CF | 0x58B8 |
| 0x2D52 | 0x58B8 | 0x58C0 | 0x58C1 | 0x5832 |
| 0x2D53 | 0x58B8 | 0x58B9 | 0x587C | 0x5839 |
| 0x2D54 | 0x58D9 | 0x58DA | 0x58DB | 0x58DC |
| 0x2D55 | 0x58B8 | 0x5814 | 0x5846 | 0x5847 |
| 0x2D56 | 0x58C7 | 0x58C8 | 0x58C9 | 0x58CA |
| 0x2D57 | 0x58BF | 0x5881 | 0x5893 | 0x583C |
| 0x2D58 | 0x58D4 | 0x58D6 | 0x58CD | 0x5832 |
| 0x2D59 | 0x58B8 | 0x5832 | 0x58CF | 0x58D0 |
| 0x2D5A | 0x5811 | 0x5832 | 0x58CF | 0x58D1 |
| 0x2D5B | 0x5811 | 0x580D | 0x5891 | 0x5893 |
| 0x2D5C | 0x58B8 | 0x5847 | 0x5854 | 0x583C |
| 0x2D5F | 0x5867 | 0x583D | 0x583E | 0x5840 |
| 0x2DB5 | 0x580D | 0x587A | 0x5832 | 0x587C |
| 0x2DB6 | 0x580D | 0x587A | 0x5832 | 0x587C |
| 0x2DB7 | 0x580D | 0x587A | 0x5832 | 0x587C |
| 0x2DBE | 0x580D | 0x5811 | 0x5832 | 0x587C |
| 0x2DC0 | 0x5811 | 0x5813 | 0x5832 | 0x5891 |
| 0x2DC3 | 0x5811 | 0x5832 | 0x583C | 0x587C |
| 0x2DC5 | 0x5811 | 0x582B | 0x583C | 0x587C |
| 0x2DC6 | 0x580D | 0x5815 | 0x583B | 0x5867 |
| 0x2DC8 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DC9 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DCC | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DCD | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DCE | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD0 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD1 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD2 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD3 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD4 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DD5 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DE0 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DE1 | 0x580D | 0x5815 | 0x583B | 0x5867 |
| 0x2DE2 | 0x580D | 0x5815 | 0x583B | 0x5867 |
| 0x2DE3 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0x2DEB | 0x5811 | 0x586A | 0x5898 | 0x583C |
| 0x2DEC | 0x5868 | 0x5869 | 0x586A | 0x58A8 |
| 0x2DED | 0x586B | 0x586C | 0x586E | 0x583C |
| 0x2E18 | 0x5811 | 0x5812 | 0x58B1 | 0x583C |
| 0x2E19 | 0x5811 | 0x5812 | 0x58B5 | 0x583C |
| 0x2E1A | 0x5811 | 0x5812 | 0x58B3 | 0x583C |
| 0x2E1B | 0x5811 | 0x5812 | 0x58B6 | 0x583C |
| 0x2E1C | 0x5811 | 0x5812 | 0x58B2 | 0x583C |
| 0x2E1D | 0x5811 | 0x5812 | 0x58B4 | 0x583C |
| 0x2E24 | 0x5811 | 0x5812 | 0x58B1 | 0x583C |
| 0x2E25 | 0x5811 | 0x5812 | 0x58B5 | 0x583C |
| 0x2E26 | 0x5811 | 0x5812 | 0x58B3 | 0x583C |
| 0x2E27 | 0x5811 | 0x5812 | 0x58B6 | 0x583C |
| 0x2E28 | 0x5811 | 0x5812 | 0x58B2 | 0x583C |
| 0x2E29 | 0x5811 | 0x5812 | 0x58B4 | 0x583C |
| 0x2E30 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E31 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E32 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E33 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E34 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E35 | 0x5811 | 0x581F | 0x5832 | 0x583C |
| 0x2E68 | 0x5811 | 0x5812 | 0x5883 | 0x5885 |
| 0x2E69 | 0x5811 | 0x5812 | 0x5886 | 0x5888 |
| 0x2E77 | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0x2E7C | 0x5811 | 0x583C | 0x5867 | 0x587C |
| 0x2E81 | 0x5805 | 0x58E9 | 0x58EA | 0x58EB |
| 0x2E82 | 0x5805 | 0x58E9 | 0x58EC | 0x58ED |
| 0x2E83 | 0x5805 | 0x58E9 | 0x58EC | 0x58EE |
| 0x2E84 | 0x5811 | 0x5805 | 0x587C | 0x583C |
| 0x2E85 | 0x5811 | 0x5805 | 0x587C | 0x583C |
| 0x2E8B | 0x587C | 0x5824 | 0x586A | 0x583C |
| 0x2E8C | 0x587C | 0x5824 | 0x586A | 0x583C |
| 0x2E8D | 0x587C | 0x5824 | 0x586A | 0x583C |
| 0x2E8E | 0x587C | 0x5824 | 0x586A | 0x583C |
| 0x2E96 | 0x588B | 0x5832 | 0x587C | 0x583C |
| 0x2E97 | 0x5811 | 0x5898 | 0x587C | 0x583C |
| 0x2E98 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2E9F | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2EA1 | 0x5811 | 0x580D | 0x583C | 0x587C |
| 0x2EE0 | 0x5850 | 0x581F | 0x5824 | 0x581E |
| 0x2EE1 | 0x581F | 0x5820 | 0x583C | 0x58EC |
| 0x2EE2 | 0x581F | 0x5820 | 0x5824 | 0x5882 |
| 0x2EE3 | 0x581F | 0x5820 | 0x5824 | 0x587F |
| 0x2EEA | 0x5852 | 0x5820 | 0x5824 | 0x581E |
| 0x2EEB | 0x5820 | 0x581F | 0x5824 | 0x58EA |
| 0x2EEC | 0x5820 | 0x5882 | 0x581F | 0x5832 |
| 0x2EF4 | 0x5824 | 0x5882 | 0x5820 | 0x5811 |
| 0x2EF5 | 0x581F | 0x5820 | 0x5832 | 0x583C |
| 0x2EFE | 0x5820 | 0x587F | 0x5832 | 0x583C |
| 0x2EFF | 0x5824 | 0x587F | 0x583C | 0x5820 |
| 0x2F08 | 0x5851 | 0x581E | 0x5824 | 0x583C |
| 0x2F09 | 0x581E | 0x583A | 0x5824 | 0x581F |
| 0x2F0D | 0x5811 | 0x580D | 0x583C | 0x5880 |
| 0x2F0F | 0x5824 | 0x580D | 0x583C | 0x5880 |
| 0x2F12 | 0x5811 | 0x580D | 0x581F | 0x583C |
| 0x2F44 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2F45 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2F46 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2F47 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2F4E | 0x5811 | 0x5832 | 0x583C | 0x5881 |
| 0x2F4F | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2F58 | 0x588B | 0x584A | 0x5853 | 0x583C |
| 0x2F63 | 0x58CE | 0x58B7 | 0x587C | 0x584A |
| 0x2F64 | 0x58CE | 0x58B7 | 0x587C | 0x584A |
| 0x2F67 | 0x5811 | 0x580D | 0x5832 | 0x5818 |
| 0x2F6C | 0x580D | 0x588B | 0x58AD | 0x583C |
| 0x2F71 | 0x5811 | 0x581E | 0x5821 | 0x580D |
| 0x2F76 | 0x5821 | 0x5834 | 0x5870 | 0x587C |
| 0x2F77 | 0x5834 | 0x5870 | 0x5833 | 0x5824 |
| 0x2F7B | 0x5811 | 0x5822 | 0x581F | 0x583C |
| 0x2F80 | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2F85 | 0x5841 | 0x5821 | 0x5824 | 0x583C |
| 0x2F8F | 0x58B7 | 0x580D | 0x5814 | 0x58CE |
| 0x2F94 | 0x5811 | 0x580D | 0x581F | 0x583C |
| 0x2F99 | 0x5824 | 0x5833 | 0x5882 | 0x5820 |
| 0x2F9A | 0x5824 | 0x5833 | 0x581E | 0x587C |
| 0x2F9E | 0x5811 | 0x5832 | 0x587C | 0x583C |
| 0x2FA3 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2FA4 | 0x5811 | 0x583C | 0x587C | 0x588B |
| 0x2FC6 | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0xCD87 | 0x5811 | 0x5832 | 0x583C | 0x587C |
| 0xCD8B | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD8F | 0x5811 | 0x5832 | 0x583C | 0x587C |
| 0xCD94 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD95 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD96 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD97 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD98 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD99 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD9A | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD9B | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD9C | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD9D | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCD9E | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0xCD9F | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA0 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA1 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA2 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA3 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA4 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA5 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA6 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA7 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA8 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDA9 | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDAA | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0xCDAB | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDAC | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDAD | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDAE | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDAF | 0x5811 | 0x5821 | 0x583C | 0x587C |
| 0xCDB0 | 0x580D | 0x583C | 0x5811 | 0x5832 |
| 0xFFFF | 0x58FF | 0x58FF | 0x58FF | 0x58FF |
MESSWERTETAB
Dimensions: 465 rows × 12 columns
| ARG | ID | RESULTNAME | KOMMENTAR | LABEL | L/H | DATENTYP | NAME | ADD | MUL | EINHEIT | DIV |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ITANS | 0x4200 | STAT_ANSAUGLUFTTEMPERATUR_WERT | Ansauglufttemperatur 1 | TIA | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x4201 | STAT_0x4201_WERT | Umgebungsdruck | AMP_MES | - | unsigned integer | - | 0 | 0,082917526 | hPa | 1 |
| IPSAU | 0x4202 | STAT_SAUGROHRDRUCK_WERT | Saugrohrdruck | MAP_MES | - | unsigned integer | - | 0 | 0,082917526 | hPa | 1 |
| ILMKG | 0x4203 | STAT_LUFTMASSE_WERT | Massenstrom vom HFM | MAF_KGH_MES | - | unsigned integer | - | 0 | 0,03125 | kg/h | 1 |
| ITUMG | 0x4204 | STAT_UMGEBUNGSTEMPERATUR_WERT | Umgebungstemperatur | TAM | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| IPLAD | 0x4205 | STAT_LADEDRUCK_WERT | Saugrohrdruck 1 / Ladedruck 1 | MAP_DIP_MES_BAS | - | unsigned integer | - | 0 | 0,082917526 | hPa | 1 |
| ITKUM | 0x4300 | STAT_KUEHLMITTELTEMPERATUR_WERT | Kühlwassertemperatur | TCO | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x4301 | STAT_0x4301_WERT | Kuehlerauslasstemperatur | TCO_2 | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| IPWAB | 0x4302 | STAT_WASSERPUMPENLEISTUNG_BSD_WERT | Wasserpumpe Leistung ueber BSD | REL_CWP_PWR | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| ITWAE | 0x4303 | STAT_WASSERPUMPE_ELEKTRONIK_TEMPERATUR_WERT | Wasserpumpe Elektronik Temperatur | TEMP_EL_CWP | - | unsigned char | - | -50 | 1 | °C | 1 |
| IIWAP | 0x4304 | STAT_WASSERPUMPE_STROM_WERT | Wasserpumpe Strom | CUR_CNS_CWP | - | unsigned char | - | 0 | 0,5 | A | 1 |
| INWAP | 0x4305 | STAT_WASSERPUMPE_DREHZAHL_WERT | Wasserpumpe Drehzahl Ist | N_REL_CWP | - | unsigned char | - | 0 | 1 | - | 1 |
| SNWAP | 0x4306 | STAT_WASSERPUMPE_DREHZAHL_SOLL_WERT | Wasserpumpe Drehzahl Soll | N_REL_CWP_SP | - | unsigned char | - | 0 | 1 | - | 1 |
| IMLOE | 0x4400 | STAT_OELSTAND_LANGZEIT_MITTEL_WERT | Ölstand Mittelwert Langzeit | OZ_NIVLANGT | - | unsigned char | - | 0 | 0,29296875 | mm manuell | 1 |
| IFSOE | 0x4401 | STAT_FUELLSTAND_MOTOROEL_KURZZEIT_WERT | Füllstand Motoröl | OZ_LP | - | unsigned char | - | 0 | 1 | % | 1 |
| ITOEL | 0x4402 | STAT_OELTEMPERATUR_WERT | Öltemperatur | TOEL | - | signed integer | - | 0 | 0,1 | °C | 1 |
| IKVLS | 0x4403 | STAT_KRAFTSTOFFVERBRAUCH_SEIT_SERVICE_WERT | Kraftstoff-Verbrauch seit letztem Service | OZ_KVBSM_UL | - | unsigned long | - | 0 | 1,22E-04 | l manuell | 1 |
| IKMLS | 0x4404 | STAT_WEG_SEIT_SERVICE_WERT | km seit letztem Service | OZ_OELKM | - | unsigned integer | - | 0 | 10 | km | 1 |
| RNIOE | 0x4405 | STAT_OELSENSOR_NIVEAU_ROH_WERT | Oelsensor Niveau Rohwert | OZ_NIVR | - | unsigned char | - | 0 | 1 | - | 1 |
| RQUOE | 0x4406 | STAT_OELSENSOR_QUALITAET_ROH_WERT | Oelsensor Qualität Rohwert | OZ_PERMR | - | unsigned integer | - | 0 | 1 | - | 1 |
| RTOEL | 0x4407 | STAT_OELSENSOR_TEMPERATUR_ROH_WERT | Oelsensor Temperatur Rohwert | OZ_TEMPR | - | unsigned char | - | 0 | 1 | - | 1 |
| ITSOE | 0x4408 | STAT_OELSENSOR_TEMPERATUR_WERT | Oelsensor Temperatur | OZ_TEMPAKT | - | signed integer | - | 0 | 0,1 | °C | 1 |
| INIOE | 0x4409 | STAT_OELSENSOR_NIVEAU_WERT | Oelsensor Niveau | OZ_NIVAKT | - | unsigned char | - | 0 | 0,29296875 | mm manuell | 1 |
| IQOEL | 0x440A | STAT_OELSENSOR_QUALITAET_WERT | Oelsensor Qualität | OZ_PERMAKT | - | unsigned integer | - | 0 | 9,16E-05 | - | 1 |
| - | 0x440B | STAT_0x440B_WERT | Länderfaktor 1 codiert | OZ_LF1C | - | unsigned char | - | 0 | 0,01 | - | 1 |
| - | 0x440C | STAT_0x440C_WERT | Länderfaktor 2 codiert | OZ_LF2C | - | unsigned char | - | 0 | 0,01 | - | 1 |
| - | 0x440D | STAT_0x440D_WERT | Länderfaktor 1 | OZ_LF1T | - | unsigned char | - | 0 | 0,01 | - | 1 |
| - | 0x440E | STAT_0x440E_WERT | Länderfaktor 2 | OZ_LF2T | - | unsigned char | - | 0 | 0,01 | - | 1 |
| - | 0x440F | STAT_0x440F_WERT | Kurzmittelwert-Niveau für den Tester | OZ_NIVKRZT | - | unsigned char | - | 0 | 0,29296875 | mm manuell | 1 |
| - | 0x4410 | STAT_0x4410_WERT | Restweg aus Permittivität abgeleitet | OZ_RWPERM | - | signed integer | - | 0 | 10 | km | 1 |
| - | 0x4411 | STAT_0x4411_WERT | Restweg aus Kraftstoffverbrauch abgeleitet | OZ_RWKVB | - | signed integer | - | 0 | 10 | km | 1 |
| - | 0x4412 | STAT_0x4412_WERT | Öl-Alter in Monate | OZ_OELZEIT | - | unsigned integer | - | 0 | 1 | - | 1 |
| - | 0x4413 | STAT_0x4413_WERT | aufbereitete Permittivität bei letztem Ölwechsel | OZ_PERMLOW | - | unsigned integer | - | 0 | 9,16E-05 | - | 1 |
| - | 0x4414 | STAT_0x4414_WERT | Permittivität für Bewertung aufbereitet (extrapoliert) | OZ_PERMEX | - | unsigned integer | - | 0 | 9,16E-05 | - | 1 |
| - | 0x4415 | STAT_0x4415_WERT | Offset für Permittivitätskorrektur | OZ_PERMOFF | - | unsigned integer | - | 0 | 9,16E-05 | - | 1 |
| - | 0x4416 | STAT_0x4416_WERT | zugeteilte Bonuskraftstoffmenge | OZ_KVBOG | - | unsigned integer | - | 0 | 1 | - | 1 |
| - | 0x4417 | STAT_0x4417_WERT | zugeteilter Permittivitätsbonus | OZ_PERMBOG | - | unsigned integer | - | 0 | 9,16E-05 | - | 1 |
| IWVEX | 0x4500 | STAT_VVT_EXCENTER_WERT | VVT-Excenter Istwert | ANG_EXC_VVL | - | unsigned integer | - | 0 | 0,021973193 | Grad | 1 |
| SWVEX | 0x4501 | STAT_VVT_EXCENTER_SOLL_WERT | VVT-Excenter Sollwert | ANG_SP_VVL | - | unsigned integer | - | 0 | 0,021973193 | ° | 1 |
| IWVVB | 0x4502 | STAT_VVT_VERSTELLBEREICH_LERNROUTINE_WERT | Mechanischer Verstellbereich VVT aus Lernroutine | ANG_STK_VVL | - | unsigned integer | - | 0 | 0,021973193 | Grad | 1 |
| SWVLR | 0x4503 | STAT_VVT_LAGEREGLER_SOLL_WERT | Sollwert für Lageregler | ANG_SP_VVL_CUS | - | unsigned integer | - | 0 | 0,021973193 | ° | 1 |
| SWVLT | 0x4504 | STAT_VVT_LAGEREGLER_SOLL_VON_TESTER_WERT | Sollwert für Lageregler vom Tester | ANG_SP_EXT_ADJ_VVL | - | unsigned char | - | 0 | 0,705796063 | Grad | 1 |
| SSPEI | 0x4505 | STAT_VVT_EINLASSSPREIZUNG_SOLL_WERT | Sollwert Einlassspreizung | CAM_SP_IVVT_IN | - | signed integer | - | 0 | 0,1 | °CRK | 1 |
| IPNWE | 0x4506 | STAT_POSITION_NOCKENWELLE_EINLASS_WERT | Nockenwellenposition Einlass | PSN_CAM_IN_1 | - | unsigned integer | - | -96 | 0,375 | °CRK | 1 |
| IPNWA | 0x4507 | STAT_POSITION_NOCKENWELLE_AUSLASS_WERT | Nockenwellenposition Auslass | PSN_CAM_EX_1 | - | unsigned integer | - | -96 | 0,375 | °CRK | 1 |
| ISNWE | 0x4508 | STAT_NW_EINLASSSPREIZUNG_WERT | Istwert Einlassspreizung | CAM_IN[1] | - | signed integer | - | 0 | 0,1 | °CRK | 1 |
| ISNWA | 0x4509 | STAT_NW_AUSLASSSPREIZUNG_WERT | Istwert Auslassspreizung | CAM_EX[1] | - | unsigned char | - | -40 | -0,375 | °CRK | 1 |
| NSNWA | 0x450A | STAT_NW_NORMSPREIZUNG_AUSLASS_WERT | Normspreizung Auslass | CAM_SP_REF_EX | - | signed integer | - | 0 | 0,0234375 | °CRK | 1 |
| NSNWE | 0x450B | STAT_NW_NORMSPREIZUNG_EINLASS_WERT | Normspreizung Einlass | CAM_SP_REF_IN | - | signed integer | - | 0 | 0,0234375 | °CRK | 1 |
| IWDKL | 0x4600 | STAT_DROSSELKLAPPENWINKEL_WERT | aktueller Drosselklappenwinkel | TPS_AV | - | unsigned integer | - | 0 | 0,007294146 | °TPS | 1 |
| SWDKL | 0x4601 | STAT_DROSSELKLAPPENWINKEL_SOLL_WERT | Drosselklappe Sollwert | TPS_SP_MDL | - | unsigned integer | - | 0 | 0,007294146 | °TPS | 1 |
| SUGEB | 0x4602 | STAT_GENERATOR_SPANNUNG_BSD_SOLL_WERT | Generator Sollspannung ueber BSD | V_ALTER_SP | - | unsigned long | - | 10,6 | 0,1 | V | 1 |
| ITGEE | 0x4603 | STAT_GENERATOR_ELEKTRONIKTEMPERATUR_WERT | Chiptemperatur Generator 1 | TCHIP | - | signed integer | - | 0 | 0,1 | °C | 1 |
| IIGEN | 0x4604 | STAT_GENERATOR_STROM_WERT | Generator Strom | I_GEN | - | unsigned char | - | 0 | 1 | A manuell | 1 |
| VGENE | 0x4605 | STAT_GENERATOR_CHIPVERSION_WERT | Chipversion Generator 1 | BSDGENCV | - | unsigned char | - | 0 | 1 | - | 1 |
| VGENR | 0x4606 | STAT_GENERATOR_REGLERVERSION_WERT | Reglerversion Generator 1 | BSDGENREGV | - | unsigned char | - | 0 | 1 | - | 1 |
| VGENH | 0x4607 | STAT_GENERATOR_HERSTELLERCODE_WERT | Herstellercode Generator 1 | GEN_MANUFAK | - | unsigned char | - | 0 | 1 | - | 1 |
| VGTYP | 0x4608 | STAT_GENERATOR_TYP_WERT | Kennung Generatortyp Generator 1 | GEN_TYPKENN | - | unsigned char | - | 0 | 1 | - | 1 |
| IUK87 | 0x4609 | STAT_KL87_SPANNUNG_WERT | Kl.87 Spannung / Versorgung DME | VB | - | unsigned char | - | 0 | 0,101562493 | V | 1 |
| IUBAT | 0x460A | STAT_UBATT_WERT | Batteriespannung aktuell | UBT | - | unsigned integer | - | 0 | 0,015 | V | 1 |
| IUIBS | 0x460B | STAT_UBATT_IBS_WERT | Batteriespannung von IBS gemessen | U_BATT | - | unsigned integer | - | 6 | 2,50E-04 | V manuell | 1 |
| IUADW | 0x460C | STAT_UBATT_AD_WANDLER_WERT | Batteriespannung vom AD-Wandler DME | VB_BAS | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| - | 0x460D | STAT_0x460D_WERT | Korrekturwert Abschaltung | ABSCH_KORR | - | signed integer | - | 0 | 0,001525879 | - | 1 |
| - | 0x460E | STAT_0x460E_WERT | Abstand zur Startfähigkeitsgrenze | D_SOC | - | signed integer | - | 0 | 0,003051758 | - | 1 |
| ILBAT | 0x460F | STAT_BATTERIELAST_WERT | Batterielast | LOAD_BAT | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IPDIS | 0x4610 | STAT_DISAKLAPPEN_POSITION_WERT | aktuelle Position Disaklappen | VIM_AV | - | unsigned integer | - | 0 | 0,003051757 | % | 1 |
| STELU | 0x4611 | STAT_E_LUEFTER_PWM_SOLL_WERT | Sollwert E-Lüfter als PWM Wert | N_PERC_ECF | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x4612 | STAT_0x4612_WERT | Erregerstrom Generator 1 | IERR | - | unsigned char | - | 0 | 0,125 | A | 1 |
| - | 0x4613 | STAT_0x4613_WERT | Kopierter Wert von zum Generator gesendeter Sollspannung Generator 1 | U_FGEN | - | unsigned integer | - | 0 | 0,100000001 | V | 1 |
| - | 0x4614 | STAT_0x4614_WERT | Auslastungsgrad Generator 1 | DFSIGGEN | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x4615 | STAT_0x4615_WERT | Kopie begrenzter Erregerstrom Generator 1 | IERRFGRENZ | - | unsigned char | - | 0 | 0,125 | A | 1 |
| - | 0x4616 | STAT_0x4616_WERT | Kopie Generator 1 LR Vorgabe auf Bus gelegt | TLRFGEN | - | unsigned char | - | 0 | 0,100000001 | s | 1 |
| - | 0x4617 | STAT_0x4617_WERT | gefiltertes Generatormoment absolut Ausgang | MD_GENNM | - | signed integer | - | 0 | 0,100000001 | Nm | 1 |
| - | 0x4618 | STAT_0x4618_WERT | Kopie Drehzahlschwelle für LR-Funktion Generator 1 aktiv | B_LRFOFF | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISBV1 | 0x4700 | STAT_SONDENBEREITSCHAFT_VORKAT_BANK1 | Status Lambdasonde betriebsbereit Vorkat Bank 1 | LV_INH_LSCL[1] | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISBV2 | 0x4701 | STAT_SONDENBEREITSCHAFT_VORKAT_BANK2 | Status Lambdasonde betriebsbereit Vorkat Bank 2 | LV_INH_LSCL[2] | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IUSO1 | 0x4702 | STAT_SONDENSPANNUNG_VORKAT_BANK1_MIT_OFFSET_WERT | Spannung Lambdasonde Vorkat Bank 1 mit Offsetkorrektur | VLS_COR_LSL[1] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUSO2 | 0x4703 | STAT_SONDENSPANNUNG_VORKAT_BANK2_MIT_OFFSET_WERT | Spannung Lambdasonde Vorkat Bank 2 mit Offsetkorrektur | VLS_COR_LSL[2] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| SINT1 | 0x4704 | STAT_LAMBDA_BANK1_SOLL_WERT | Lambda Sollwert Bank 1 | LAMB_BAS[1] | - | unsigned integer | - | 0 | 9,77E-04 | - | 1 |
| SINT2 | 0x4705 | STAT_LAMBDA_BANK2_SOLL_WERT | Lambda Sollwert Bank 2 | LAMB_BAS[2] | - | unsigned integer | - | 0 | 9,77E-04 | - | 1 |
| ISKUB | 0x4800 | STAT_KUPPLUNGSSCHALTER_BETAETIGT_WERT | Kupplungsschalter Status | LV_CS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISKUV | 0x4801 | STAT_KUPPLUNGSSCHALTER_VORHANDEN_WERT | Kupplungsschalter vorhanden | LV_CS_CUS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISSPO | 0x4802 | STAT_SPORTTASTER_BETAETIGT_WERT | Sporttaster aktiv | LV_SOF_SWI | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISKLI | 0x4803 | STAT_KLIMA_EIN | Status Klima ein | STATE_ACIN_CAN | - | unsigned char | - | 0 | 1 | - | 1 |
| ISSLP | 0x4804 | STAT_SEKUNDAERLUFTPUMPE_WERT | Sekundärluft Pumpe aktiv | LV_SAP | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISSRC | 0x4805 | STAT_STARTRELAIS_UEBER_CAN_WERT | Startrelais über CAN aktiv | LV_RLY_ST_CAN | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| - | 0x4806 | STAT_0x4806_WERT | Steuergeraete-Innentemperatur | TECU | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| INMOT | 0x4807 | STAT_MOTORDREHZAHL_WERT | Motor Drehzahl | N | - | unsigned integer | - | 0 | 1 | rpm | 1 |
| SNLLD | 0x4808 | STAT_LEERLAUFDREHZAHL_SOLL_WERT | Leerlauf Solldrehzahl | N_SP_IS | - | unsigned integer | - | 0 | 1 | rpm | 1 |
| ISLLA | 0x4809 | STAT_LEERLAUF_AKTIV | Status LL | LV_IS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISKME | 0x480A | STAT_KILOMETERSTAND_WERT | Kilometerstand Auflösung 1 km | CTR_KM_BN | - | unsigned long | - | 0 | 1 | km | 1 |
| IFPWG | 0x480B | STAT_FAHRERWUNSCH_PEDAL_WERT | Pedalwert Fahrerwunsch in % | PV_AV | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IUPV1 | 0x5A00 | STAT_PWG1_VERSORGUNGSSPANNUNG_WERT | Versorgung FWG 1 | VCC_PVS_1 | - | unsigned integer | - | 0 | 0,009765591 | V | 1 |
| IUPV2 | 0x5A01 | STAT_PWG2_VERSORGUNGSSPANNUNG_WERT | Versorgung FWG 2 | VCC_PVS_2 | - | unsigned integer | - | 0 | 0,009765591 | V | 1 |
| RUVVV | 0x5A02 | STAT_VVT_VERSORGUNGSSPANNUNG_ROH_WERT | Versorgung VVT Rohwert | V_VCC_SENS_VVL_RAW | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUVVV | 0x5A03 | STAT_VVT_VERSORGUNGSSPANNUNG_WERT | Versorgung VVT | V_VCC_SENS_VVL | - | unsigned integer | - | 0 | 0,0078125 | V | 1 |
| IUPW1 | 0x5A04 | STAT_PWG1_SPANNUNG_WERT | Spannung Pedalwertgeber 1 | V_PVS_1 | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUPW2 | 0x5A05 | STAT_PWG2_SPANNUNG_WERT | Spannung Pedalwertgeber 2 | V_PVS_2 | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUDK1 | 0x5A06 | STAT_DK1_SPANNUNG_WERT | Spannung Drosselklappe Poti 1 | V_TPS_1 | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUDK2 | 0x5A07 | STAT_DK2_SPANNUNG_WERT | Spannung Drosselklappe Poti 2 | V_TPS_2 | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUANS | 0x5A08 | STAT_ANSAUGLUFTTEMPERATUR_SPANNUNG_WERT | Spannung Ansauglufttemperatur | V_TIA | - | unsigned char | - | 0 | 0,0196 | V manuell | 1 |
| IUKUM | 0x5A09 | STAT_KUEHLMITTELTEMPERATUR_SPANNUNG_WERT | Spannung Motortemperatur | V_TCO | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUKUA | 0x5A0A | STAT_KUEHLERAUSLASSTEMPERATUR_SPANNUNG_WERT | Spannung Kühlmitteltemperatur Kühlerausgang | V_TCO_2 | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUUMG | 0x5A0B | STAT_UMGEBUNGSDRUCK_SPANNUNG_WERT | Spannung DME Umgebungsdruck | V_AMP | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IULMM | 0x5A0C | STAT_LUFTMASSE_SPANNUNG_WERT | Spannung Luftmasse | V_MAF | - | unsigned char | - | 0 | 0,0196 | V | 1 |
| IUSLS | 0x5A0D | STAT_SEKUNDAERLUFT_SPANNUNG_WERT | Spannung Sekundärluft | V_SAF | - | unsigned char | - | 0 | 0,0196 | V | 1 |
| IUSGI | 0x5A0E | STAT_STEUERGERAETE_INNENTEMPERATUR_SPANNUNG_WERT | Spannung SG-Innentemperatur | V_TECU | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| - | 0x5A0F | STAT_0x5A0F_WERT | Spannung Kl.15 | V_IGK_BAS | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUK15 | 0x5A10 | STAT_KL15_SPANNUNG_WERT | Spannung Kl15 | V_IGK_MES | - | unsigned integer | - | 0 | 0,028060116 | V | 1 |
| IUSV1 | 0x5A11 | STAT_SONDENSPANNUNG_VORKAT_BANK1_WERT | Spannung Lambdasonde vor Kat 1 | VLS_UP[1] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUSV2 | 0x5A12 | STAT_SONDENSPANNUNG_VORKAT_BANK2_WERT | Spannung Lambdasonde vor Kat 2 | VLS_UP[2] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUSN1 | 0x5A13 | STAT_SONDENSPANNUNG_NACHKAT_BANK1_WERT | Spannung Lambdasonde hinter Kat 1 | VLS_DOWN[1] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUSN2 | 0x5A14 | STAT_SONDENSPANNUNG_NACHKAT_BANK2_WERT | Spannung Lambdasonde hinter Kat 2 | VLS_DOWN[2] | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUDMT | 0x5A17 | STAT_DMTL_SPANNUNG_WERT | Spannung Strommessung DMTL | V_DMTL | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| ITKUA | 0x5A21 | STAT_KUEHLERAUSLASSTEMPERATUR_WERT | Kühlmitteltemperatur Kühlerausgang | TCO_2_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| ITSGI | 0x5A22 | STAT_STEUERGERAETE_INNENTEMPERATUR_WERT | Steuergerät Innentemperatur | TECU | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| SWDKL | 0x5A24 | STAT_DK_WINKEL_SOLL_WERT | Drosselklappe Sollwert | TPS_SP | - | unsigned integer | - | 0 | 0,007294146 | °TPS | 1 |
| IPUMG | 0x5A26 | STAT_UMGEBUNGSDRUCK_WERT | Umgebungsdruck | MAP | - | unsigned integer | - | 0 | 0,082917526 | hPa | 1 |
| IPPW1 | 0x5A27 | STAT_PWG1_WERT | Pedalwertgeber Poti 1 | PV_AV_1 | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IPPW2 | 0x5A28 | STAT_PWG2_WERT | Pedalwertgeber Poti 2 | PV_AV_2 | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| RFPWG | 0x5A29 | STAT_FAHRERWUNSCH_PEDAL_ROH_WERT | Fahrpedalwert | PV_AV_RAW | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| ILMSL | 0x5A2A | STAT_LUFTMASSE_SEKUNDAERLUFT_WERT | Luftmasse Sekundärluft | SAF_KGH_MES_BAS | - | unsigned integer | - | 0 | 0,015625 | kg/h | 1 |
| ILUZ1 | 0x5A30 | STAT_LAUFUNRUHE_ZYL1_WERT | Laufunruhe Zylinder 1 | ER_CYL[0] | - | signed integer | - | 0 | 1 | µs | 1 |
| ILUZ2 | 0x5A31 | STAT_LAUFUNRUHE_ZYL2_WERT | Laufunruhe Zylinder 2 | ER_CYL[4] | - | signed integer | - | 0 | 1 | µs | 1 |
| ILUZ3 | 0x5A32 | STAT_LAUFUNRUHE_ZYL3_WERT | Laufunruhe Zylinder 3 | ER_CYL[2] | - | signed integer | - | 0 | 1 | µs | 1 |
| ILUZ4 | 0x5A33 | STAT_LAUFUNRUHE_ZYL4_WERT | Laufunruhe Zylinder 4 | ER_CYL[5] | - | signed integer | - | 0 | 1 | µs | 1 |
| ILUZ5 | 0x5A34 | STAT_LAUFUNRUHE_ZYL5_WERT | Laufunruhe Zylinder 5 | ER_CYL[1] | - | signed integer | - | 0 | 1 | µs | 1 |
| ILUZ6 | 0x5A35 | STAT_LAUFUNRUHE_ZYL6_WERT | Laufunruhe Zylinder 6 | ER_CYL[3] | - | signed integer | - | 0 | 1 | µs | 1 |
| ISKLO | 0x5A36 | STAT_STATUS_KLOPFEN_WERT | Status Klopfen | LV_KNK | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IUKZ1 | 0x5A37 | STAT_KLOPFWERT_ZYL1_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 1 | NL[0] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IUKZ2 | 0x5A38 | STAT_KLOPFWERT_ZYL2_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 2 | NL[4] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IUKZ3 | 0x5A39 | STAT_KLOPFWERT_ZYL3_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 3 | NL[2] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IUKZ4 | 0x5A3A | STAT_KLOPFWERT_ZYL4_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 4 | NL[5] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IUKZ5 | 0x5A3B | STAT_KLOPFWERT_ZYL5_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 5 | NL[1] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IUKZ6 | 0x5A3C | STAT_KLOPFWERT_ZYL6_SPANNUNG_WERT | Spannung Klopfwerte Zylinder 6 | NL[3] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IKSZ1 | 0x5A3D | STAT_KLOPFSIGNAL_ZYL1_WERT | Klopfsignal Zylinder 1 | KNKS[0] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IKRZ1 | 0x5A3E | STAT_KLOPFSIGNAL_ZYL1_RELATIV_WERT | Klopfsignal Zylinder 1 relativ | KNKS_REL_NL_0 | - | unsigned integer | - | 0 | 1,53E-05 | - | 1 |
| IKSZ6 | 0x5A3F | STAT_KLOPFSIGNAL_ZYL6_WERT | Klopfsignal Zylinder 6 | KNKS[5] | - | unsigned integer | - | 0 | 7,63E-05 | V | 1 |
| IKRZ6 | 0x5A40 | STAT_KLOPFSIGNAL_ZYL6_RELATIV_WERT | Klopfsignal Zylinder 6 relativ | KNKS_REL_NL_5 | - | unsigned integer | - | 0 | 1,53E-05 | - | 1 |
| IZEZ1 | 0x5A42 | STAT_EINSPRITZZEIT_ZYL1_WERT | Einspritzzeit Zylinder 1 | ti_1_0 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZEZ2 | 0x5A43 | STAT_EINSPRITZZEIT_ZYL2_WERT | Einspritzzeit Zylinder 2 | ti_1_4 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZEZ3 | 0x5A44 | STAT_EINSPRITZZEIT_ZYL3_WERT | Einspritzzeit Zylinder 3 | ti_1_2 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZEZ4 | 0x5A45 | STAT_EINSPRITZZEIT_ZYL4_WERT | Einspritzzeit Zylinder 4 | ti_1_5 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZEZ5 | 0x5A46 | STAT_EINSPRITZZEIT_ZYL5_WERT | Einspritzzeit Zylinder 5 | ti_1_1 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZEZ6 | 0x5A47 | STAT_EINSPRITZZEIT_ZYL6_WERT | Einspritzzeit Zylinder 6 | ti_1_3 | - | unsigned integer | - | 0 | 0,004 | ms | 1 |
| IZWZ1 | 0x5A49 | STAT_ZUENDWINKEL_ZYL1_WERT | Zündwinkel Zylinder 1 | IGA_IGC[0] | - | unsigned char | - | -35,625 | 0,375 | °CRK | 1 |
| ILASB | 0x5A4B | STAT_BERECHNETE_LAST_WERT | Berechneter Lastwert | LOAD_CLC | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| ISACR | 0x5A4E | STAT_KLIMAKOMPRESSORRELAIS_EIN | Klimakompressorrelais Ein | LV_ACCOUT_RLY | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISVVR | 0x5A4F | STAT_VVT_ENTLASTUNGSRELAIS_EIN_WERT | VVT- Entlastungsrelais Ein | LV_STATE_RLY_VVL | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ILAB1 | 0x5A50 | STAT_LAMBDA_BANK1_WERT | Lambdawert vor Kat Bank 1 | LAMB_LS_UP[1] | - | unsigned integer | - | 0 | 9,77E-04 | - | 1 |
| ILAB2 | 0x5A51 | STAT_LAMBDA_BANK2_WERT | Lambdawert vor Kat Bank 2 | LAMB_LS_UP[2] | - | unsigned integer | - | 0 | 9,77E-04 | - | 1 |
| IRNK1 | 0x5A52 | STAT_READINESS_SONDE_NACHKAT_BANK1_WERT | Status LS nach Kat Bank 1 | LV_LS_DOWN_READY[1] | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IRNK2 | 0x5A53 | STAT_READINESS_SONDE_NACHKAT_BANK2_WERT | Status LS nach Kat Bank 2 | LV_LS_DOWN_READY[2] | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISHN1 | 0x5A54 | STAT_SONDENHEIZUNG_NACHKAT_BANK1_WERT | Status LS Heizung nach Kat Bank 1 | STATE_LSH_DOWN[1] | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | 0 | 1 | 0-n | 1 |
| ISHN2 | 0x5A55 | STAT_SONDENHEIZUNG_NACHKAT_BANK2_WERT | Status LS Heizung nach Kat Bank 2 | STATE_LSH_DOWN[2] | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | 0 | 1 | 0-n | 1 |
| ISHV1 | 0x5A56 | STAT_SONDENHEIZUNG_VORKAT_BANK1_WERT | Status LS Heizung vor Kat Bank 1 | STATE_LSH_UP[1] | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | 0 | 1 | 0-n | 1 |
| ISHV2 | 0x5A57 | STAT_SONDENHEIZUNG_VORKAT_BANK2_WERT | Status LS Heizung vor Kat Bank 2 | STATE_LSH_UP[2] | - | 0xFF | _CNV_S_7_EGCP_RANGE_710 | 0 | 1 | 0-n | 1 |
| IAHV1 | 0x5A58 | STAT_SONDENHEIZUNG_PWM_VORKAT_BANK1_WERT | Lambdasondenheizung PWM vor Kat Bank 1 | LSHPWM_UP[1] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IAHN1 | 0x5A59 | STAT_SONDENHEIZUNG_PWM_NACHKAT_BANK1_WERT | Lambdasondenheizung PWM nach Kat Bank 1 | LSHPWM_DOWN[1] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IAHV2 | 0x5A5A | STAT_SONDENHEIZUNG_PWM_VORKAT_BANK2_WERT | Lambdasondenheizung PWM vor Kat Bank 2 | LSHPWM_UP[2] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IAHN2 | 0x5A5B | STAT_SONDENHEIZUNG_PWM_NACHKAT_BANK2_WERT | Lambdasondenheizung PWM nach Kat Bank 2 | LSHPWM_DOWN[2] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| ISBLS | 0x5A60 | STAT_BREMSLICHTSCHALTER_EIN_WERT | Bremslichtschalter Ein | LV_IM_BLS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISBLT | 0x5A61 | STAT_BREMSLICHTTESTSCHALTER_EIN_WERT | Bremslichttestschalter Ein | LV_IM_BTS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISOED | 0x5A62 | STAT_OELDRUCKSCHALTER_EIN_WERT | Öldruckschalter Ein | LV_POIL_SWI | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISEBO | 0x5A63 | STAT_E_BOXLUEFTER_EIN_WERT | E-Boxlüfter Ein | LV_EBOX_CFA | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| - | 0x5A64 | STAT_0x5A64_WERT | Kühlerjalousie | LV_ECRAS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISAGK | 0x5A65 | STAT_ABGASKLAPPE_EIN_WERT | Abgasklappe Ein | LV_EF | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISDMP | 0x5A66 | STAT_DMTL_PUMPE_EIN_WERT | DMTL Pumpe Ein | LV_DMTL_PUMP | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISDMV | 0x5A67 | STAT_DMTL_VENTIL_EIN_WERT | DMTL Ventil Ein | LV_DMTLS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISDMH | 0x5A68 | STAT_DMTL_HEIZUNG_EIN_WERT | DMTL Heizung Ein | LV_HDMTL_ON | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISMIL | 0x5A69 | STAT_MIL_EIN_WERT | MIL Lampe Ein | LV_MIL_CAN | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISFGL | 0x5A6A | STAT_LAMPE_FGR_EIN_WERT | Lampe FGR Ein | LV_CRU_MAIN_SWI | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISCEL | 0x5A6B | STAT_CHECK_ENGINE_LAMPE_EIN_WERT | Lampe Check Engine Ein | LV_WAL_1_CAN | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| ISTFG | 0x5A6D | STAT_TASTE_FGR_EIN_WERT | Status Taste FGR | STATE_MSW_CAN | - | 0xFF | _CNV_S_8_RANGE_STAT_19 | 0 | 1 | 0-n | 1 |
| IASOU | 0x5A70 | STAT_SOUNDKLAPPE_PWM_WERT | Soundklappe Zustand | LV_SOF | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IADS1 | 0x5A71 | STAT_DISA1_PWM_WERT | DISA1 PWM (große/obere Klappe) | VIMPWM_1 | - | signed integer | - | 0 | 0,003051758 | % | 1 |
| IADS2 | 0x5A72 | STAT_DISA2_PWM_WERT | DISA2 PWM (kleine/untere Klappe) | VIMPWM_2 | - | signed integer | - | 0 | 0,003051758 | % | 1 |
| - | 0x5A73 | STAT_0x5A73_WERT | Kurbelgehäuseentlüftungsheizung | LV_RLY_CRCV_HEAT | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IAKFT | 0x5A74 | STAT_BEHEIZTER_THERMOSTAT_PWM_WERT | Beheizter Thermostat PWM | ECTPWM | - | unsigned integer | - | 0 | 0,001525879 | % | 1 |
| IASEV | 0x5A75 | STAT_SEKUNDAERLUFT_VENTIL_PWM_WERT | Sekundärluft Ventil | LV_SAV | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| - | 0x5A76 | STAT_0x5A76_WERT | Adaption Öffnungspunkt Tankentlüftungsventil | CPPWM_ADD_AD_MEM | - | unsigned integer | - | 0 | 0,001525879 | % | 1 |
| IATEV | 0x5A77 | STAT_TEV_PWM_WERT | TankEntlüftungsVentil TEV PWM | CPPWM_CPS | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IAAGK | 0x5A78 | STAT_ABGASKLAPPE_ANSTEUERUNG_WERT | Abgasklappe Ansteuerung | LV_EF | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IAELUE | 0x5A79 | STAT_E_LUEFTER_PWM_WERT | E-Lüfter PWM | ECFPWM[0] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IAVEP | 0x5A7A | STAT_VANOS_EINLASS_PWM_WERT | VANOS PWM Wert Einlass | IVVTPWM_0 | - | unsigned integer | - | 0 | 0,001525879 | % | 1 |
| IAVAP | 0x5A7B | STAT_VANOS_AUSLASS_PWM_WERT | VANOS PWM Wert Auslass | IVVTPWM_1 | - | unsigned integer | - | 0 | 0,001525879 | % | 1 |
| IINT1 | 0x5A81 | STAT_INTEGRATOR_BANK1_WERT | Integrator Bank 1 | FAC_LAM_LIM[1] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| IINT2 | 0x5A82 | STAT_INTEGRATOR_BANK2_WERT | Integrator Bank 2 | FAC_LAM_LIM[2] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| IADD1 | 0x5A83 | STAT_ADAPTION_ADDITIV_BANK1_WERT | Adaption Offset Lambda Bank 1 | MFF_ADD_LAM_AD_OUT[1] | - | signed integer | - | 0 | 0,02119478 | mg/stk | 1 |
| IADD2 | 0x5A84 | STAT_ADAPTION_ADDITIV_BANK2_WERT | Adaption Offset Lambda Bank 2 | MFF_ADD_LAM_AD_OUT[2] | - | signed integer | - | 0 | 0,02119478 | mg/stk | 1 |
| IMUL1 | 0x5A85 | STAT_ADAPTION_MULTIPLIKATIV_BANK1_WERT | Adaption Multiplikation Lambda Bank 1 | FAC_LAM_AD_OUT[1] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| IMUL2 | 0x5A86 | STAT_ADAPTION_MULTIPLIKATIV_BANK2_WERT | Adaption Multiplikation Lambda Bank 2 | FAC_LAM_AD_OUT[2] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| - | 0x5A87 | STAT_0x5A87_WERT | Adaptionswert Trimregelung Bank 1 | LAMB_DELTA_AD_LAM_ADJ[1] | - | signed integer | - | 0 | 6,103515625E-5 | - | 1 |
| - | 0x5A88 | STAT_0x5A88_WERT | Adaptionswert Trimregelung Bank 2 | LAMB_DELTA_AD_LAM_ADJ[2] | - | signed integer | - | 0 | 6,103515625E-5 | - | 1 |
| - | 0x5A89 | STAT_0x5A89_WERT | multiplikative Gemischadaption hohe Last Bank 1 | FAC_H_RNG_LAM_AD[1] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| - | 0x5A8A | STAT_0x5A8A_WERT | multiplikative Gemischadaption hohe Last Bank 2 | FAC_H_RNG_LAM_AD[2] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| - | 0x5A8B | STAT_0x5A8B_WERT | multiplikative Gemischadaption niedrige Last Bank 1 | FAC_L_RNG_LAM_AD[1] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| - | 0x5A8C | STAT_0x5A8C_WERT | multiplikative Gemischadaption niedrige Last Bank 2 | FAC_L_RNG_LAM_AD[2] | - | signed integer | - | 0 | 0,001525879 | % | 1 |
| - | 0x5A8D | STAT_0x5A8D_WERT | additive Gemischadaption Leerlauf Bank 1 | MFF_ADD_LAM_AD[1] | - | signed integer | - | 0 | 0,0211947802454233 | mg/stk | 1 |
| - | 0x5A8E | STAT_0x5A8E_WERT | additive Gemischadaption Leerlauf Bank 2 | MFF_ADD_LAM_AD[2] | - | signed integer | - | 0 | 0,0211947802454233 | mg/stk | 1 |
| - | 0x5A91 | STAT_0x5A91_WERT | Katalysatordiagnosewert Bank 1 | CAT_DIAG_1 | - | unsigned char | - | 0,0 | 0,015625 | - | 1 |
| - | 0x5A92 | STAT_0x5A92_WERT | Katalysatordiagnosewert Bank 2 | CAT_DIAG_2 | - | unsigned char | - | 0,0 | 0,015625 | - | 1 |
| SANWA | 0x5A94 | STAT_NW_AUSLASS_SOLL_WERT | Nockenwelle Auslass Sollwert | CAM_SP_IVVT_EX | - | unsigned char | - | -40 | -0,375 | °CRK | 1 |
| IGEADA | 0x5A95 | STAT_GEBERRAD_ADAPTION_VSA_WERT | Adaptionswert Nockenwelle Auslaß | PSN_AD_CAM_EX_1 | - | unsigned char | - | -48 | 0,375 | °CRK | 1 |
| IGEADE | 0x5A96 | STAT_GEBERRAD_ADAPTION_VSE_WERT | Adaptionswert Nockenwelle Einlaß | PSN_AD_CAM_IN_1 | - | unsigned char | - | -48 | 0,375 | °CRK | 1 |
| - | 0x5A97 | STAT_0x5A92_WERT | Bedingung EVANOS im Anschlag beim letzten Abstellen | B_VSEAN_LOC | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IAKWF | 0x5A99 | STAT_KURBELWELLEN_ADAPTION_BEENDET_WERT | Kurbelwellen Adaption beendet | LV_SEG_AD_AVL_ER | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| IDSLS | 0x5AA1 | STAT_SLS_DIAGNOSE_WERT | Status Diagnose TEV | STATE_EOL_KWP_CPS | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| IDTEV | 0x5AA2 | STAT_TEV_DIAGNOSE_WERT | Status Diagnose DMTL | STATE_EOL_KWP_DMTL | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| IDDMT | 0x5AA3 | STAT_DMTL_DIAGNOSE_WERT | Status Diagnose Lambdasonden | STATE_EOL_KWP_VLS | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| IDLSS | 0x5AA4 | STAT_LS_DIAGNOSE_WERT | Status Diagnose Leerlaufdrehzahlverstellung | STATE_EOL_KWP_N_SP_IS | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| - | 0x5AA5 | STAT_0x5AA5_WERT | Status Diagnose Sekundärluft | STATE_EOL_KWP_SA | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| - | 0x5AA6 | STAT_0x5AA6_WERT | Status Diagnose VVT Anschläge lernen | STATE_EOL_KWP_VVL_AD | - | 0xFF | _CNV_S_10_STATE_EOL__354 | 0 | 1 | 0-n | 1 |
| IVKMH | 0x5AB1 | STAT_GESCHWINDIGKEIT_WERT | Geschwindigkeit | VS | - | unsigned char | - | 0 | 1 | km/h | 1 |
| IWMIL | 0x5AB3 | STAT_FAHRSTRECKE_MIL_AN_WERT | Fahrstrecke mit MIL an | DIST_ACT_MIL | - | unsigned integer | - | 0 | 1 | km | 1 |
| IZBST | 0x5AB4 | STAT_BETRIEBSSTUNDENZAEHLER_WERT | Betriebsstundenzähler | TRT | - | unsigned long | - | 0 | 2,78E-05 | h | 1 |
| IVSLP | 0x5AB5 | STAT_VARIANTE_SEKUNDAERLUFTPUMPE_WERT | Variante Sekundärluftpumpe | LV_VAR_SAP | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| RTANS | 0x5AB6 | STAT_ANSAUGLUFTTEMPERATUR1_ROH_WERT | Rohwert Ansauglufttemperatur 1 | TIA_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| RTKWA | 0x5AB7 | STAT_KUEHLWASSERTEMPERATUR_ROH_WERT | Rohwert Kühlwassertemperatur | TCO_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| IUSAU | 0x5AB8 | STAT_SAUGROHRDRUCK_SPANNUNG_WERT | Spannung Saugrohrdruck | V_MAP | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IUSST | 0x5AB9 | STAT_SPORTSCHALTER_SPANNUNG_WERT | Spannung Sportschalter | V_SOF_SWI | - | unsigned integer | - | 0 | 0,004882813 | V | 1 |
| IAKSP | 0x5ABA | STAT_KRAFTSTOFFPUMPE_PWM_WERT | PWM Kraftstoffpumpe | EFPPWM | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IWVVW | 0x5ABB | STAT_VVT_WINKEL_AUSWAHL_WERT | Ausgewählter VVT Istwinkel | ANG_REL_VVL | - | unsigned integer | - | 0 | 0,012207031 | % | 1 |
| IMLUF | 0x5ABC | STAT_LUFTMASSE_WERT | Luftmasse | MAF_KGH_MES_BAS | - | unsigned integer | - | 0 | 0,03125 | kg/h | 1 |
| IASRE | 0x5ABD | STAT_STARTRELAIS_AKTIV_WERT | Starterrelais aktiv | LV_RLY_ST | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| - | 0x5AC0 | STAT_0x5AC0_WERT | Reset Status Hardware-Register | RST_HW_STATUS | - | unsigned integer | - | 0 | 1 | - | 1 |
| - | 0x5AC1 | STAT_0x5AC1_WERT | Reset Status Software-Register | RST_SW_STATUS | - | unsigned long | - | 0 | 1 | - | 1 |
| - | 0x5AC2 | STAT_0x5AC2_WERT | Reset Adresse | RST_LPRC_RESET_ADDRESS | - | unsigned long | - | 0 | 1 | - | 1 |
| - | 0x5AC3 | STAT_0x5AC3_WERT | Fehler Segmentzähler | CTR_ENG_PSN_CHK_ERR | - | unsigned integer | - | 0,0 | 1,0 | - | 1 |
| - | 0x5AE0 | STAT_0x5AE0_WERT | TM_1 | TMOT_B1 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE1 | STAT_0x5AE1_WERT | TM_2 | TMOT_B2 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE2 | STAT_0x5AE2_WERT | TM_3 | TMOT_B3 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE3 | STAT_0x5AE3_WERT | TM_4 | TMOT_B4 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE4 | STAT_0x5AE4_WERT | TM_5 | TMOT_B5 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE5 | STAT_0x5AE5_WERT | TO_1 | TOEL_B1 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE6 | STAT_0x5AE6_WERT | TO_2 | TOEL_B2 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE7 | STAT_0x5AE7_WERT | TO_3 | TOEL_B3 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE8 | STAT_0x5AE8_WERT | TO_4 | TOEL_B4 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AE9 | STAT_0x5AE9_WERT | TO_5 | TOEL_B5 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AEA | STAT_0x5AEA_WERT | TG_1 | TGET_B1 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AEB | STAT_0x5AEB_WERT | TG_2 | TGET_B2 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AEC | STAT_0x5AEC_WERT | TG_3 | TGET_B3 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AED | STAT_0x5AED_WERT | TG_4 | TGET_B4 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AEE | STAT_0x5AEE_WERT | TG_5 | TGET_B5 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AEF | STAT_0x5AEF_WERT | TU_1 | TUMG_B1 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AF0 | STAT_0x5AF0_WERT | TU_2 | TUMG_B2 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AF1 | STAT_0x5AF1_WERT | TU_3 | TUMG_B3 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AF2 | STAT_0x5AF2_WERT | TU_4 | TUMG_B4 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5AF3 | STAT_0x5AF3_WERT | TU_5 | TUMG_B5 | - | unsigned integer | - | 0,0 | 0,00152587890625 | % | 1 |
| - | 0x5800 | STAT_0x5800_WERT | Zeit nach Start | OBD_T_AST | - | unsigned char | - | 0 | 256 | s | 1 |
| - | 0x5801 | STAT_0x5801_WERT | Umgebungsdruck | OBD_AMP | - | unsigned char | - | 0 | 1 | kPa | 1 |
| ICLR1 | 0x5802 | STAT_LAMBDAREGELUNG_ZUSTAND_BANK1_WERT | Zustand Lambdaregelung Bank 1 | STATE_LS[1] | - | 0xFF | _CNV_S_5_LACO_RANGE_765 | 0 | 1 | 0-n | 1 |
| ICLR2 | 0x5803 | STAT_LAMBDAREGELUNG_ZUSTAND_BANK2_WERT | Zustand Lambdaregelung Bank 2 | STATE_LS[2] | - | 0xFF | _CNV_S_5_LACO_RANGE_765 | 0 | 1 | 0-n | 1 |
| SLAST | 0x5804 | STAT_LASTWERT_BERECHNET_WERT | Berechneter Lastwert | LOAD_CLC | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x5805 | STAT_0x5805_WERT | Kühlmitteltemperatur OBD | OBD_TCO | - | unsigned char | - | -40 | 1 | °C | 1 |
| ILIN1 | 0x5806 | STAT_LAMBDA_INTEGRATOR_GRUPPE1_WERT | Lambda Integrator Gruppe 1 | OBD_LAM_COR[1] | - | unsigned char | - | -100 | 0,78125 | % | 1 |
| ILAM1 | 0x5807 | STAT_LAMBDA_ADAPTION_MULTIPLIKATIV_GRUPPE1_WERT | Lambda Adaption Summe mul. & add. Gruppe 1 | OBD_LAM_AD[1] | - | unsigned char | - | -100 | 0,78125 | % | 1 |
| ILIN2 | 0x5808 | STAT_LAMBDA_INTEGRATOR_GRUPPE2_WERT | Lambda Integrator Gruppe 2 | OBD_LAM_COR[2] | - | unsigned char | - | -100 | 0,78125 | % | 1 |
| ILAM2 | 0x5809 | STAT_LAMBDA_ADAPTION_MULTIPLIKATIV_GRUPPE2_WERT | Lambda Adaption Summe mul. & add. Gruppe 2 | OBD_LAM_AD[2] | - | unsigned char | - | -100 | 0,78125 | % | 1 |
| IPKRS | 0x580A | STAT_KRAFTSTOFFDRUCK_WERT | Kraftstoffdruck | OBD_FUP | - | unsigned char | - | 0 | 3 | kPa | 1 |
| IPSA2 | 0x580B | STAT_SAUGROHRDRUCK_2_WERT | Saugrohrdruck | OBD_MAP | - | unsigned char | - | 0 | 1 | kPa | 1 |
| INAUF | 0x580C | STAT_N_AUFLOESUNG_WERT | Drehzahl | OBD_N | - | unsigned char | - | 0 | 64 | rpm | 1 |
| IVKM2 | 0x580D | STAT_GESCHWINDIGKEIT_2_WERT | Geschwindigkeit | VS | - | unsigned char | - | 0 | 1 | km/h | 1 |
| IZZY1 | 0x580E | STAT_ZUENDZEITPUNKT_ZYL1_WERT | Zündzeitpunkt Zylinder 1 | OBD_IGA_IGC | - | unsigned char | - | -64 | 0,5 | °CRK | 1 |
| ITANL | 0x580F | STAT_ANSAUGLUFTTEMPERATUR_LAW_WERT | Ansauglufttemperatur | OBD_TIA | - | unsigned char | - | -40 | 1 | °C | 1 |
| ILMGS | 0x5810 | STAT_LUFTMASSE_GRAMM_PRO_SEKUNDE_WERT | Luftdurchsatz OBD | OBD_MAF | - | unsigned char | - | 0 | 2,56 | g/s | 1 |
| INM32 | 0x5811 | STAT_MOTORDREHZAHL_N32_WERT | Motordrehzahl | N_32 | - | unsigned char | - | 0 | 32 | rpm | 1 |
| - | 0x5812 | STAT_0x5812_WERT | Luftmasse gemessen | MAF_KGH_MES_BAS | - | unsigned char | - | 0 | 8 | kg/h | 1 |
| ILREL | 0x5813 | STAT_LASTWERT_RELATIV_WERT | Relative Last | RF | - | signed char | - | 0 | 2,56 | % | 1 |
| - | 0x5814 | STAT_0x5814_WERT | Fahrpedalwert | PV_AV_RAW | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x5815 | STAT_0x5815_WERT | Batteriespannung | OBD_VB | - | unsigned char | - | 0 | 0,256 | V | 1 |
| - | 0x5816 | STAT_0x5816_WERT | Lambda Setpoint | OBD_LAMB_SP | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| - | 0x5817 | STAT_0x5817_WERT | Umgebungstemperatur | OBD_TAM | - | unsigned char | - | -40 | 1 | °C | 1 |
| ILMMG | 0x5818 | STAT_LUFTMASSE_PRO_HUB_WERT | Luftmasse gerechnet | MAF | - | unsigned char | - | 0 | 5,425863743 | mg/stk | 1 |
| - | 0x5819 | STAT_0x5819_WERT | Drehzahl OBD Byte | N_SAE_BYTE_KWP | - | unsigned char | - | 0 | 64 | rpm | 1 |
| - | 0x581A | STAT_0x581A_WERT | Nockenwelle Einlass | CAM_IN_KWP | - | unsigned char | - | 50,0 | 0,400000005960464 | °CRK | 1 |
| - | 0x581B | STAT_0x581B_WERT | Nockenwelle Einlass Sollwert | CAM_SP_IVVT_IN_KWP | - | unsigned char | - | 50,0 | 0,400000005960464 | °CRK | 1 |
| - | 0x581C | STAT_0x581C_WERT | Nockenwelle Auslass | CAM_EX[1] | - | unsigned char | - | -40 | -0,375 | °CRK | 1 |
| - | 0x581D | STAT_0x581D_WERT | Nockenwelle Auslass Sollwert | CAM_SP_IVVT_EX | - | unsigned char | - | -40 | -0,375 | °CRK | 1 |
| - | 0x581E | STAT_0x581E_WERT | Ansauglufttemperatur | TIA_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x581F | STAT_0x581F_WERT | Motortemperatur | TCO_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5820 | STAT_0x5820_WERT | Kühlmitteltemperatur Kühlerausgang | TCO_2_MES | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5821 | STAT_0x5821_WERT | Steuergerät Innentemperatur | TECU | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5822 | STAT_0x5822_WERT | ( Motor ) - Öltemperatur | TOIL_MES | - | unsigned char | - | -40 | 1 | °C | 1 |
| IZMOS | 0x5823 | STAT_ZEIT_MOTOR_STEHT_WERT | Zeit Motor steht | T_ES | - | unsigned char | - | 0 | 256 | min | 1 |
| - | 0x5824 | STAT_0x5824_WERT | Umgebungstemperatur | TAM | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5825 | STAT_0x5825_WERT | Abstellzeit | T_ES_CUS_KWP | - | unsigned char | - | 0 | 4 | min | 1 |
| IDKS1 | 0x5826 | STAT_DROSSELKLAPPE_SENSOR1_WERT | Drosselklappe Sensor 1 | TPS_AV_1 | - | unsigned char | - | 0 | 1,867301464 | °TPS | 1 |
| - | 0x5827 | STAT_0x5827_WERT | Lambdasonden Heizung Vorkat 1 | LSHPWM_UP[1] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x5828 | STAT_0x5828_WERT | Lambdasonden Heizung Vorkat 2 | LSHPWM_UP[2] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x5829 | STAT_0x5829_WERT | Lambdasonden Heizung Hinterkat 1 | LSHPWM_DOWN[1] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x582A | STAT_0x582A_WERT | Lambdasonden Heizung Hinterkat 2 | LSHPWM_DOWN[2] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IDRCA | 0x582B | STAT_DREHMOMENTEINGRIFF_CAN_WERT | Drehmomenteingriff über CAN | STATE_TQ_CAN_PLAUS | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x582C | STAT_0x582C_WERT | Anzahl ungültiger Schreibüberprüfungszyklen am SPI-Interface der Lambdasonde vor Kat Bank 1 | CTR_ERR_LSL_IF_SPI_WR[1] | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x582D | STAT_0x582D_WERT | Anzahl ungültiger Schreibüberprüfungszyklen am SPI-Interface der Lambdasonde vor Kat Bank 2 | CTR_ERR_LSL_IF_SPI_WR[2] | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x582E | STAT_0x582E_WERT | Adaptionsfaktor Sensor Zeitkonstante vor Kat Bank 1 | FAC_DIAG_DYN_LSL_UP[1] | - | unsigned char | - | 0 | 0,25 | - | 1 |
| - | 0x582F | STAT_0x582F_WERT | Adaptionsfaktor Sensor Zeitkonstante vor Kat Bank 2 | FAC_DIAG_DYN_LSL_UP[2] | - | unsigned char | - | 0 | 0,25 | - | 1 |
| - | 0x5830 | STAT_0x5830_WERT | Mittelwert der normierten Signalamplitude der Lambdasonde vor Kat Bank 1 | FAC_MV_DIAG_DYN_LSL_UP[1] | - | unsigned char | - | 0 | 0,25 | - | 1 |
| - | 0x5831 | STAT_0x5831_WERT | Mittelwert der normierten Signalamplitude der Lambdasonde vor Kat Bank 2 | FAC_MV_DIAG_DYN_LSL_UP[2] | - | unsigned char | - | 0 | 0,25 | - | 1 |
| IMOST | 0x5832 | STAT_MOTOR_STATUS_WERT | Motor Status | STATE_ENG | - | 0xFF | _CNV_S_6_RANGE_STAT_146 | 0 | 1 | 0-n | 1 |
| - | 0x5833 | STAT_0x5833_WERT | Umgebungstemperatur beim Start | TAM_ST | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5834 | STAT_0x5834_WERT | Umgebungsdruck | AMP_MES | - | unsigned char | - | 0 | 21,22688675 | hPa | 1 |
| INGRD | 0x5836 | STAT_DREHZAHLGRADIENT_WERT | Drehzahlgradient | N_GRD | - | signed char | - | 0 | 32 | rpm/s | 1 |
| - | 0x5837 | STAT_0x5837_WERT | Status OBD-I Fehler vor Kat Bank 1 | STATE_ERR_EL_LSL_UP[1] | - | 0xFF | _CNV_S_11_EGCP_RANGE_728 | 0 | 1 | 0-n | 1 |
| - | 0x5838 | STAT_0x5838_WERT | Status OBD-I Fehler vor Kat Bank 2 | STATE_ERR_EL_LSL_UP[2] | - | 0xFF | _CNV_S_11_EGCP_RANGE_728 | 0 | 1 | 0-n | 1 |
| ISDKN | 0x5839 | STAT_DROSSELKLAPPE_NOTLAUF_WERT | Status Drosselklappe Notlauf | STATE_ETC_LIH | - | 0xFF | _CNV_S_6_RANGE_STAT_305 | 0 | 1 | 0-n | 1 |
| - | 0x583A | STAT_0x583A_WERT | Ansauglufttemperatur beim Start | TIA_ST | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| IKTFS | 0x583B | STAT_KRAFTSTOFFTANK_FUELLSTAND_WERT | Kraftstofftank Füllstand | FTL | - | unsigned char | - | 0 | 1 | l | 1 |
| - | 0x583C | STAT_0x583C_WERT | Spannung Kl. 87 | VB | - | unsigned char | - | 0 | 0,101562493 | V | 1 |
| - | 0x583D | STAT_0x583D_WERT | Reset: Quelle | RST_DET | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x583E | STAT_0x583E_WERT | Motordrehzahl bei Reset | N_RST_DET | - | unsigned char | - | 0 | 256 | rpm | 1 |
| - | 0x583F | STAT_0x583F_WERT | Drosselklappe Sollwert | TPS_SP | - | unsigned char | - | 0 | 1,867301464 | °TPS | 1 |
| - | 0x5840 | STAT_0x5840_WERT | CPU Last bei Reset | CPU_LOAD_RST_DET | - | unsigned char | - | 0 | 25 | % | 1 |
| RTSGR | 0x5841 | STAT_STEUERGERAETE_INNENTEMPERATUR_ROH_WERT | SG-Innentemperatur Rohwert | V_TECU_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5843 | STAT_0x5843_WERT | Versorgung FWG 1 | VCC_PVS_1_KWP | - | unsigned char | - | 0 | 0,039062504 | V | 1 |
| - | 0x5845 | STAT_0x5845_WERT | Spannung Lambdasonde VorKat 1 | VLS_UP_KWP[1] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5846 | STAT_0x5846_WERT | Spannung Pedalwertgeber 1 | V_PVS_1_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5847 | STAT_0x5847_WERT | Spannung Pedalwertgeber 2 | V_PVS_2_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5848 | STAT_0x5848_WERT | Spannung Lambdasonde VorKat 2 | VLS_UP_KWP[2] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5849 | STAT_0x5849_WERT | Spannung Lambdasonde HinterKat 1 | VLS_DOWN_KWP[1] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| RUK15 | 0x584A | STAT_KL15_SPANNUNG_ROH_WERT | Spannung Kl. 15 Rohwert | V_IGK_BAS_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x584B | STAT_0x584B_WERT | Spannung Lambdasonde HinterKat 2 | VLS_DOWN_KWP[2] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x584C | STAT_0x584C_WERT | Spannung Drosselklappe Poti 2 | V_TPS_2_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| SQTEK | 0x584D | STAT_TANKENTLUEFTUNG_DURCHFLUSS_SOLL_WERT | korrigierter Sollwert Durchfluss Tankentlüftung | FLOW_COR_CPS | - | unsigned char | - | 0 | 0,03125 | kg/h | 1 |
| - | 0x584E | STAT_0x584E_WERT | Spannung Drosselklappe Poti 1 | V_TPS_1_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x584F | STAT_0x584F_WERT | Spannung Luftmasse | V_MAF | - | unsigned char | - | 0 | 0,0196 | V | 1 |
| - | 0x5850 | STAT_0x5850_WERT | Spannung Motortemperatur | V_TCO_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5851 | STAT_0x5851_WERT | Spannung Ansauglufttemperatur | V_TIA | - | unsigned char | - | 0 | 0,0196 | - | 1 |
| - | 0x5852 | STAT_0x5852_WERT | Kühlmitteltemperatur Kühlerausgang Rohwert | V_TCO_2_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5853 | STAT_0x5853_WERT | Spannung Kl.87 Rohwert | VB_BAS_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5854 | STAT_0x5854_WERT | Versorgung FWG 2 | VCC_PVS_2_KWP | - | unsigned char | - | 0 | 0,039062504 | V | 1 |
| - | 0x5855 | STAT_0x5855_WERT | Mittelwert Bank 1 | FAC_LAM_MV_MMV[1] | - | signed char | - | 0 | 0,390625 | % | 1 |
| - | 0x5856 | STAT_0x5856_WERT | Mittelwert Bank 2 | FAC_LAM_MV_MMV[2] | - | signed char | - | 0 | 0,390625 | % | 1 |
| - | 0x5858 | STAT_0x5858_WERT | Drosselklappe aktueller Wert | TPS_AV | - | unsigned char | - | 0 | 1,867301464 | °TPS | 1 |
| - | 0x5859 | STAT_0x5859_WERT | DMTL Strom Referenzleck | CUR_DMTL_REF_LEAK_KWP | - | unsigned char | - | 0 | 0,19531247 | mA | 1 |
| - | 0x585A | STAT_0x585A_WERT | DMTL Strom Grobleck | CUR_DMTL_ROUGH_LEAK_MIN_KWP | - | unsigned char | - | 0 | 0,19531247 | mA | 1 |
| - | 0x585B | STAT_0x585B_WERT | DMTL Strom Diagnoseende | CUR_DMTL_COR_FIL_KWP | - | unsigned char | - | 0 | 0,19531247 | mA | 1 |
| - | 0x585C | STAT_0x585C_WERT | Widerstand Lambdasonde NK 1 | R_IT_LS_DOWN_KWP_H[1] | - | unsigned char | - | 0 | 256 | ohm | 1 |
| IRLN2 | 0x585D | STAT_LAMBDASONDE_WIDERSTAND_NACHKAT2_WERT | Widerstand Lambdasonde NK 2 | R_IT_LS_DOWN_KWP_H[2] | - | unsigned char | - | 0 | 256 | ohm | 1 |
| IRUN1 | 0x585E | STAT_LAMBDASONDE_WIDERSTAND_NACHKAT1_UNTERES_BYTE_WERT | unteres Byte Widerstand Lambdasonde NK 1 | R_IT_LS_DOWN_KWP_L[1] | - | unsigned char | - | 0 | 1 | ohm | 1 |
| IRUN2 | 0x585F | STAT_LAMBDASONDE_WIDERSTAND_NACHKAT2_UNTERES_BYTE_WERT | unteres Byte Widerstand Lambdasonde NK 2 | R_IT_LS_DOWN_KWP_L[2] | - | unsigned char | - | 0 | 1 | ohm | 1 |
| IRLV1 | 0x5860 | STAT_LAMBDASONDE_WIDERSTAND_VORKAT1_WERT | Widerstand Lambdasonde VK 1 | R_IT_LS_UP_KWP_H[1] | - | unsigned char | - | 0 | 64 | ohm | 1 |
| IRLV2 | 0x5861 | STAT_LAMBDASONDE_WIDERSTAND_VORKAT2_WERT | Widerstand Lambdasonde VK 2 | R_IT_LS_UP_KWP_H[2] | - | unsigned char | - | 0 | 64 | ohm | 1 |
| IRUV1 | 0x5863 | STAT_LAMBDASONDE_WIDERSTAND_VORKAT1_UNTERES_BYTE_WERT | untere Byte Widerstand Lambdasonde VK 1 | R_IT_LS_UP_KWP_L[1] | - | unsigned char | - | 0 | 0,25 | ohm | 1 |
| IRUV2 | 0x5864 | STAT_LAMBDASONDE_WIDERSTAND_VORKAT2_UNTERES_BYTE_WERT | untere Byte Widerstand Lambdasonde VK 2 | R_IT_LS_UP_KWP_L[2] | - | unsigned char | - | 0 | 0,25 | ohm | 1 |
| - | 0x5865 | STAT_0x5865_WERT | Oelstand Mittelwert Langzeit | OZ_NIVLANGT | - | unsigned char | - | 0 | 0,29296875 | mm manuell | 1 |
| - | 0x5866 | STAT_0x5866_WERT | Füllstand Motoröl | OZ_LP | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x5867 | STAT_0x5867_WERT | Kilometerstand | CTR_KM_CAN | - | unsigned char | - | 0 | 2560 | km | 1 |
| ISSR1 | 0x5868 | STAT_STANDVERBRAUCHER_REGISTRIERT_TEIL1_WERT | Status Standverbraucher registriert Teil 1 | STAT_SV_REG1 | - | unsigned char | - | 0 | 1 | - | 1 |
| ISSR2 | 0x5869 | STAT_STANDVERBRAUCHER_REGISTRIERT_TEIL2_WERT | Status Standverbraucher registriert Teil 2 | STAT_SV_REG2 | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x586A | STAT_0x586A_WERT | Batteriespannung von IBS gemessen | U_BATT | - | unsigned char | - | 6 | 0,064 | V manuell | 1 |
| IZR82 | 0x586B | STAT_ZEIT_MIT_RUHESTROM_80_200_WERT | Zeit mit Ruhestrom 80 - 200 mA | T2HISTSHORT | - | unsigned char | - | 0 | 14,9333334 | min | 1 |
| IZR21 | 0x586C | STAT_ZEIT_MIT_RUHESTROM_200_1000_WERT | Zeit mit Ruhestrom 200 - 1000 mA | T3HISTSHORT | - | unsigned char | - | 0 | 14,9333334 | min | 1 |
| IZSST | 0x586D | STAT_ZAEHLER_ERKENNUNG_SCHLECHTE_STRASSE_WERT | Zähler Erkennung schlechte Strasse | SUM_RR | - | unsigned char | - | 0 | 256 | - | 1 |
| IZRG1 | 0x586E | STAT_ZEIT_MIT_RUHESTROM_GROESER_1000_WERT | Zeit mit Ruhestrom >1000 mA | T4HISTSHORT | - | unsigned char | - | 0 | 14,9333334 | min | 1 |
| - | 0x5870 | STAT_0x5870_WERT | Spannung DME Umgebungsdruck | V_AMP_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| SLAG1 | 0x5871 | STAT_LAMBDA_SOLLWERT_GRUPPE1_WERT | Lambda-Sollwert Gruppe 1 | LAMB_SP_KWP[1] | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| SLAG2 | 0x5873 | STAT_LAMBDA_SOLLWERT_GRUPPE2_WERT | Lambda-Sollwert Gruppe 2 | LAMB_SP_KWP[2] | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| - | 0x5874 | STAT_0x5874_WERT | Spannung Strommessung DMTL | V_DMTL_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| ILMMM | 0x5876 | STAT_LUFTMASSE_MITTLERE_MINIMALE_WERT | Mittlere Diagnosewert minimale Luftmasse | SAF_DIAG_MIN | - | unsigned char | - | 0 | 1 | kg/h | 1 |
| IDMMS | 0x5877 | STAT_DIFFERENZ_MAX_MIN_SAF_WERT | Differenz zwischen Maximum und Minimum SAF | SAF_KGH_DIF | - | unsigned char | - | 0 | 4 | kg/h | 1 |
| ILRR1 | 0x5878 | STAT_LAMBDAVERSCHIEBUNG_RUECKFUEHRREGLER1_WERT | Lambdaverschiebung Rückführregler 1 | LAMB_DELTA_I_LAM_ADJ_KWP[1] | - | signed char | - | 0 | 9,765625E-4 | - | 1 |
| ILRR2 | 0x5879 | STAT_LAMBDAVERSCHIEBUNG_RUECKFUEHRREGLER2_WERT | Lambdaverschiebung Rückführregler 2 | LAMB_DELTA_I_LAM_ADJ_KWP[2] | - | signed char | - | 0 | 9,765625E-4 | - | 1 |
| ISFGR | 0x587A | STAT_FGR_WERT | Status FGR | STATE_CRU | - | 0xFF | _CNV_S_6_RANGE_STAT_106 | 0 | 1 | 0-n | 1 |
| ISMST | 0x587C | STAT_MOTORSTEUERUNG_WERT | Status Motorsteuerung | ECU_STATE | - | 0xFF | _CNV_S_7_RANGE_ECU__142 | 0 | 1 | 0-n | 1 |
| - | 0x587D | STAT_0x587D_WERT | Symptom bei Schubabschaltung Sonde vor Kat Bank 1 | STATE_SYM_DIAG_PUC_LSL_UP[1] | - | 0xFF | _CNV_S_4_EGCP_RANGE_739 | 0 | 1 | 0-n | 1 |
| - | 0x587E | STAT_0x587E_WERT | Symptom bei Schubabschaltung Sonde vor Kat Bank 2 | STATE_SYM_DIAG_PUC_LSL_UP[2] | - | 0xFF | _CNV_S_4_EGCP_RANGE_739 | 0 | 1 | 0-n | 1 |
| IELTV | 0x587F | STAT_E_LUEFTER_TASTVERHAELTNIS_WERT | Tastverhaeltnis E-Lüfter | ECFPWM[0] | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x5880 | STAT_0x5880_WERT | Tastverhältnis: Luftklappe | ECRASPWM | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| SBEGA | 0x5881 | STAT_BERECHNETER_GANG_WERT | berechneter Gang | GEAR | - | unsigned char | - | 0 | 1 | - | 1 |
| ITMOS | 0x5882 | STAT_MOTORTEMPERATUR_BEIM_START_WERT | Motortemperatur beim Start | TCO_ST | - | unsigned char | - | -48 | 0,75 | °C | 1 |
| - | 0x5883 | STAT_0x5883_WERT | Spannung Klopfwerte Zylinder 1 | NL[0] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5885 | STAT_0x5885_WERT | Spannung Klopfwerte Zylinder 3 | NL[2] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5886 | STAT_0x5886_WERT | Spannung Klopfwerte Zylinder 6 | NL[3] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x5888 | STAT_0x5888_WERT | Spannung Klopfwerte Zylinder 4 | NL[5] | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| ILAG1 | 0x5889 | STAT_LAMBDA_ISTWERT_GRUPPE1_WERT | Lambda-Istwert Gruppe 1 | LAMB_KWP[1] | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| ILAG2 | 0x588A | STAT_LAMBDA_ISTWERT_GRUPPE2_WERT | Lambda-Istwert Gruppe 2 | LAMB_KWP[2] | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| IZSSE | 0x588B | STAT_ZEIT_SEIT_STARTENDE_WERT | Zeit seit Startende | T_AST | - | unsigned char | - | 0 | 25,6 | s | 1 |
| ITKV1 | 0x588C | STAT_LAMBDASONDE_KERAMIKTEMPERATUR_VORKAT1_WERT | Keramiktemperatur Lambdasonde VK 1 | TTIP_MES_LS_UP[1] | - | signed char | - | 0 | 16 | °C | 1 |
| IZDML | 0x588D | STAT_ZEIT_DMTL_LECKMESSUNG_WERT | aktuelle Zeit DMTL Leckmessung | T_ACT_LEAK_MES | - | unsigned char | - | 0 | 25,6 | s | 1 |
| IIDMP | 0x588E | STAT_PUMPENSTROM_BEI_DMTL_PUMPENPRUEFUNG_WERT | Pumpenstrom bei DMTL Pumpenprüfung | CUR_DMTL_DMTLS_TEST | - | unsigned char | - | 0 | 1,562523842 | mA | 1 |
| ITKV2 | 0x588F | STAT_LAMBDASONDE_KERAMIKTEMPERATUR_VORKAT2_WERT | Keramiktemperatur Lambdasonde VK 2 | TTIP_MES_LS_UP[2] | - | signed char | - | 0 | 16 | °C | 1 |
| IMOKU | 0x5891 | STAT_MOMENTANFORDERUNG_KUPPLUNG_WERT | Momentanforderung an der Kupplung | TQ_REQ_CLU | - | signed char | - | 0 | 8 | Nm | 1 |
| IDMGW | 0x5893 | STAT_DREHMOMENTABFALL_BEIM_GANGWECHSEL_WERT | Drehmomentabfall schnell bei Gangwechsel | TQI_GS_FAST_DEC | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x5894 | STAT_0x5894_WERT | Symptom Lambdasondenheizung vor Kat Bank 1 | STATE_SYM_OBD_LSL_LSH_UP[1] | - | 0xFF | _CNV_S_4_EGCP_RANGE_732 | 0 | 1 | 0-n | 1 |
| - | 0x5895 | STAT_0x5895_WERT | Symptom Lambdasondenheizung vor Kat Bank 2 | STATE_SYM_OBD_LSL_LSH_UP[2] | - | 0xFF | _CNV_S_4_EGCP_RANGE_732 | 0 | 1 | 0-n | 1 |
| - | 0x5896 | STAT_0x5896_WERT | Abgastemperatur nach Kat Bank 1 | TEG_CAT_DOWN_MDL[1] | - | unsigned char | - | 0 | 16 | °C | 1 |
| - | 0x5897 | STAT_0x5897_WERT | Abgastemperatur nach Kat Bank 2 | TEG_CAT_DOWN_MDL[2] | - | unsigned char | - | 0 | 16 | °C | 1 |
| SUGEN | 0x5898 | STAT_GENERATOR_SPANNUNG_SOLL_WERT | Generator Sollspannung | V_ALTER_SP_KWP | - | unsigned char | - | 0 | 0,100000001 | V | 1 |
| - | 0x5899 | STAT_0x5899_WERT | Istwert DISA-Position | VIM_AV | - | unsigned char | - | 0 | 0,781249821 | % | 1 |
| IUOS1 | 0x589B | STAT_SPANNUNGSOFFSET_SIGNALPFAD1_WERT | Spannungsoffset Signalpfad CJ120 1 | VLS_OFS_LSL_KWP[1] | - | signed char | - | 0 | 0,004882785 | V | 1 |
| IUOS2 | 0x589C | STAT_SPANNUNGSOFFSET_SIGNALPFAD2_WERT | Spannungsoffset Signalpfad CJ120 2 | VLS_OFS_LSL_KWP[2] | - | signed char | - | 0 | 0,004882785 | V | 1 |
| - | 0x589E | STAT_0x589E_WERT | Status VVT- Entlastungsrelais | STATE_RLY_VVL_ADJ_EXT | - | 0xFF | _CNV_S_3_STATE_RLY__374 | 0 | 1 | 0-n | 1 |
| IWVVT | 0x589F | STAT_VVT_ISTWINKEL_WERT | VVT Istwinkel | ANG_EXC_VVL_KWP | - | unsigned char | - | 0 | 0,78125 | ° | 1 |
| SWVVT | 0x58A0 | STAT_VVT_SOLLWINKEL_WERT | VVT Sollwinkel | ANG_SP_CTL_VVL_KWP | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x58A1 | STAT_0x58A1_WERT | Ausgegeben Tastverhältnis | PWM_DR_OUT_SET_VVL_KWP | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IIVVM | 0x58A2 | STAT_VVT_MOTORSTROM_WERT | VVT Motorstrom | CUR_MOT_VVL_3_KWP | - | signed char | - | 0 | 1 | A | 1 |
| ITVVM | 0x58A3 | STAT_VVT_MOTORTEMPERATUR_WERT | VVT Motortemperatur | TEMP_MOT_VVL_KWP | - | signed char | - | 0 | 2 | ° | 1 |
| IUVVT | 0x58A4 | STAT_VVT_SPANNUNGSVERSORGUNG_WERT | VVT Spannungsversorgung | VCC_DR_VVL_KWP | - | unsigned char | - | 0 | 0,1 | V | 1 |
| IUVVS | 0x58A5 | STAT_VVT_SENSORVERSORGUNGSSPANNUNG_WERT | VVT Sensorversorgungsspannung | V_VCC_SENS_VVL_KWP | - | unsigned char | - | 0 | 0,1 | V | 1 |
| IDVVS | 0x58A6 | STAT_VVT_SENSORDIFFERENZ_WERT | VVT Sensordifferenz | ANG_DE_ABSV_PLAUS_CHK_VVL_KWP | - | unsigned char | - | 0 | 0,703125 | ° | 1 |
| ITVVE | 0x58A7 | STAT_VVT_ENDSTUFENTEMPERATUR_WERT | VVT Endstufentemperatur | TEMP_SWI_MES_MAX_VVL_KWP | - | signed char | - | 0 | 2 | °C | 1 |
| IZMAB | 0x58A8 | STAT_MOTORABSTELLZEIT_WERT | Motorabstellzeit | T_ES_KWP | - | unsigned char | - | 0 | 4 | min | 1 |
| - | 0x58A9 | STAT_0x58A9_WERT | Reset Zähler Überwachungsrechner | RST_CTR_MU_SAVE | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x58AA | STAT_0x58AA_WERT | Reset Zähler Hauptrechner | RST_CTR_MC_SAVE | - | unsigned char | - | 0 | 1 | - | 1 |
| IADK1 | 0x58AB | STAT_ABWEICHUNG_DK_POTI1_WERT | Abweichung DK-Ersatzwert und DK-Poti 1 | TPS_MAF_DIF_INT_1 | - | unsigned char | - | 0 | 5,425863743 | mg/stk | 1 |
| IADK2 | 0x58AC | STAT_ABWEICHUNG_DK_POTI2_WERT | Abweichung DK-Ersatzwert und DK-Poti 2 | TPS_MAF_DIF_INT_2 | - | unsigned char | - | 0 | 5,425863743 | mg/stk | 1 |
| IPWG1 | 0x58AD | STAT_PEDALWERTGEBER1_WERT | Pedalwertgeber 1 | PV_AV_1 | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IKRAN | 0x58AF | STAT_KRAFTSTOFF_ANFORDERUNG_AN_PUMPE_WERT | Kraftstoff Anforderung an Pumpe | VFF_EFP | - | unsigned char | - | 0 | 1 | l/h | 1 |
| IDKAD | 0x58B0 | STAT_DK_ADAPTIONSSCHRITT_WERT | DK-Adaptionsschritt | TPS_AD_STEP_KWP | - | unsigned char | - | 0 | 1 | - | 1 |
| IZFZ1 | 0x58B1 | STAT_FUNKENBRENNDAUER_ZYL1_WERT | Funkenbrenndauer Zylinder 1 | V_DUR_IGC_0 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IZFZ5 | 0x58B2 | STAT_FUNKENBRENNDAUER_ZYL5_WERT | Funkenbrenndauer Zylinder 5 | V_DUR_IGC_1 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IZFZ3 | 0x58B3 | STAT_FUNKENBRENNDAUER_ZYL3_WERT | Funkenbrenndauer Zylinder 3 | V_DUR_IGC_2 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IZFZ6 | 0x58B4 | STAT_FUNKENBRENNDAUER_ZYL6_WERT | Funkenbrenndauer Zylinder 6 | V_DUR_IGC_3 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IZFZ2 | 0x58B5 | STAT_FUNKENBRENNDAUER_ZYL2_WERT | Funkenbrenndauer Zylinder 2 | V_DUR_IGC_4 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IZFZ4 | 0x58B6 | STAT_FUNKENBRENNDAUER_ZYL4_WERT | Funkenbrenndauer Zylinder 4 | V_DUR_IGC_5 | - | unsigned char | - | 0 | 1,024 | ms | 1 |
| IPBRE | 0x58B7 | STAT_BREMSDRUCK_WERT | Bremsdruck | BRAKE_PRS | - | unsigned char | - | 0 | 1 | bar | 1 |
| - | 0x58B8 | STAT_0x58B8_WERT | Drehzahl Überwachung | N_32_MON | - | unsigned char | - | 0 | 32 | rpm | 1 |
| - | 0x58B9 | STAT_0x58B9_WERT | Pedalwert Überwachung | PV_AV_MON | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x58BC | STAT_0x58BC_WERT | Luftmasse Überwachung | MAF_MON | - | unsigned char | - | 0 | 5,447058678 | mg/stk | 1 |
| - | 0x58BD | STAT_0x58BD_WERT | Modellluftmasse Überwachung tiefpassgefiltert | MAF_SUB_COR_MMV_MON | - | unsigned char | - | 0 | 5,447058678 | mg/stk | 1 |
| IMMSR | 0x58BF | STAT_MOMENTENANFORDERUNG_VON_MSR_RELATIV_WERT | relative Momentenforderung von MSR über CAN | TQI_MSR_CAN | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| - | 0x58C0 | STAT_0x58C0_WERT | Motordrehzahl Eratztwert Überwachung | N_32_SUB_MON | - | unsigned char | - | 0 | 32 | rpm | 1 |
| ITLSZ | 0x58C1 | STAT_LAUFUNRUHE_SEGMENTZEIT_WERT | Laufunruhe Segmentzeit | SEG_T_MES | - | unsigned char | - | 0 | 256 | µs | 1 |
| INSUE | 0x58C7 | STAT_LEERLAUF_SOLLDREHZAHLABWEICHUNG_WERT | LL-Solldrehzahlabweichung Überwachung | N_DIF_SP_IS_MON | - | unsigned char | - | -4096 | 32 | rpm | 1 |
| - | 0x58C8 | STAT_0x58C8_WERT | I-Anteil Momentdifferenz Überwachung und Modell | TQ_DIF_I_IS_MON | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58C9 | STAT_0x58C9_WERT | I-Anteil LL passive Rampe aktiv | LV_PAS_RAMP_ACT_I_IS | - | 0xFF | - | 0 | 1 | 0/1 | 1 |
| - | 0x58CA | STAT_0x58CA_WERT | PD-Anteil langsam Leerlaufregelung | TQ_DIF_P_D_SLOW_IS | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58CB | STAT_0x58CB_WERT | PD-Anteil schnell Leerlaufregelung | TQ_DIF_P_D_FAST_IS | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58CC | STAT_0x58CC_WERT | Verlustmoment Überwachung | TQ_LOSS_MON | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58CD | STAT_0x58CD_WERT | Verlustmomentabweichung Überwachung | TQ_LOSS_DIF_MON | - | signed char | - | 0 | 2 | Nm | 1 |
| - | 0x58CE | STAT_0x58CE_WERT | Carrierbyte Schalterstati | STATE_BYTE_SWI_KWP | - | unsigned char | - | 0 | 1 | - | 1 |
| SMOMO | 0x58CF | STAT_MOTORMOMENT_SOLL_WERT | Motormoment Sollwert Überwachung | TQI_SP_MON | - | unsigned char | - | 0 | 2 | Nm | 1 |
| IMOMO | 0x58D0 | STAT_MOTORMOMENT_IST_WERT | Motormoment Istwert Überwachung | TQI_AV_MON | - | unsigned char | - | 0 | 2 | Nm | 1 |
| IMOAK | 0x58D1 | STAT_MOTORMOMENT_AKTUELL_WERT | Moment aktueller Wert | TQI_AV | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58D4 | STAT_0x58D4_WERT | Abweichung maximales Moment an Kupplung Überwachung | TQ_MAX_CLU_DIF_MON | - | signed char | - | 0 | 2 | Nm | 1 |
| - | 0x58D6 | STAT_0x58D6_WERT | Abweichung minimales Moment an Kupplung Überwachung | TQ_MIN_CLU_DIF_MON | - | signed char | - | 0 | 8 | Nm | 1 |
| - | 0x58D9 | STAT_0x58D9_WERT | Fehler Hauptrechner | ERR_COD_MC_SAVE | - | 0xFF | _CNV_S_14_TMO3_ERR_C_422 | 0 | 1 | 0-n | 1 |
| - | 0x58DA | STAT_0x58DA_WERT | Fehler Überwachungsrechner | ERR_COD_MU_SAVE | - | 0xFF | _CNV_S_21_TMO3_ERR_C_423 | 0 | 1 | 0-n | 1 |
| - | 0x58DB | STAT_0x58DB_WERT | Fehler Bitfeld high Byte | STATE_N_MAX_MON_HIGH_KWP | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x58DC | STAT_0x58DC_WERT | Fehler Bitfeld low Byte | STATE_N_MAX_MON_LOW_KWP | - | unsigned char | - | 0 | 1 | - | 1 |
| IUSPS | 0x58DF | STAT_SPORTSCHALTER_SPANNUNG_WERT | Spannung Sportschalter | V_SOF_SWI_KWP | - | unsigned char | - | 0 | 0,01953125 | V | 1 |
| - | 0x58E0 | STAT_0x58E0_WERT | Abgleich Drosselklappenmodell (Faktor) | EISYDK_KORFAK_B | - | unsigned char | - | 0,0 | 0,0078125 | - | 1 |
| - | 0x58E1 | STAT_0x58E1_WERT | Abgleich Drosselklappenmodell (Offset) | EISYDK_KOROFF_B | - | signed char | - | 0,0 | 8,0 | kg/h | 1 |
| - | 0x58E2 | STAT_0x58E2_WERT | Abgleich Einlassventilmodell (Faktor) | EISYEV_KORFAK_B | - | unsigned char | - | 0,0 | 0,0078125 | - | 1 |
| - | 0x58E3 | STAT_0x58E3_WERT | Abgleich Einlassventilmodell (Offset) | EISYEV_KOROFF_B | - | signed char | - | 0,0 | 8,0 | kg/h | 1 |
| - | 0x58E4 | STAT_0x58E4 | Betriebsart Istwert | BA_IST | - | 0xFF | _CNV_S_7_Def_ba_467 | 0 | 1 | 0-n | 1 |
| INMAZ | 0x58E5 | STAT_DREHZAHL_MAXIMAL_BEI_ZUENDAUSSETZER_WERT | Maximale Drehzahl bei Zündaussetzern | N_MAX_SCDN_MIS_32_KWP | - | unsigned char | - | 0 | 32 | rpm | 1 |
| ILMAZ | 0x58E6 | STAT_LAST_MAXIMAL_BEI_ZUENDAUSSETZER_RELATIV_WERT | Maximale relative Last bei Zündaussetzern | LOAD_MAX_SCDN_MIS | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| ILMIZ | 0x58E7 | STAT_LAST_MINIMAL_BEI_ZUENDAUSSETZER_RELATIV_WERT | Minimale relative Last bei Zündaussetzern | LOAD_MIN_SCDN_MIS | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| INMIZ | 0x58E8 | STAT_DREHZAHL_MINIMAL_BEI_ZUENDAUSSETZER_WERT | Minimale Drehzahl bei Zündaussetzern | N_MIN_SCDN_MIS_32_KWP | - | unsigned char | - | 0 | 32 | rpm | 1 |
| IUWAP | 0x58E9 | STAT_WASSERPUMPE_SPANNUNG_WERT | Wasserpumpe Spannung | V_CWP | - | unsigned char | - | 0 | 0,1 | V | 1 |
| - | 0x58EA | STAT_0x58EA_WERT | Wasserpumpe Drehzahl | N_REL_CWP | - | unsigned char | - | 0 | 1 | - | 1 |
| INWSI | 0x58EB | STAT_WASSERPUMPE_DREHZAHL_SOLL_IST_DIFFERENZ_WERT | Wasserpumpe Drehzahl Soll-Ist-Differenz | N_REL_CWP_DIF | - | unsigned char | - | 0 | 1 | - | 1 |
| - | 0x58EC | STAT_0x58EC_WERT | Wasserpumpe Temperatur Elektronik | TEMP_EL_CWP | - | unsigned char | - | -50 | 1 | °C | 1 |
| - | 0x58ED | STAT_0x58ED_WERT | Wasserpumpe Stromaufnahme | CUR_CNS_CWP | - | unsigned char | - | 0 | 0,5 | A | 1 |
| ILWAP | 0x58EE | STAT_WASSERPUMPE_LEISTUNGSREDUZIERT_WERT | Wasserpumpe leistungsreduziert | REL_CWP_PWR | - | unsigned char | - | 0 | 0,390625 | % | 1 |
| IDMEL | 0x58F1 | STAT_DME_LOSNUMMER_WERT | DME - Losnummer | STATE_LRN_ECU | - | 0xFF | _CNV_S_8_RANGE_STAT_326 | 0 | 1 | 0-n | 1 |
| - | 0x58F5 | STAT_0x58F5_WERT | Eingangssignal Rückführregler 1 | VLS_DIF_LAM_ADJ_KWP[1] | - | signed char | - | 0 | 0,004882785 | V | 1 |
| - | 0x58F6 | STAT_0x58F6_WERT | Eingangssignal Rückführregler 2 | VLS_DIF_LAM_ADJ_KWP[2] | - | signed char | - | 0 | 0,004882785 | V | 1 |
| ILSA5 | 0x58F8 | STAT_LAUFUNRUHE_SEGMENTADAPTION_ZYL5_WERT | Segmentadaption Laufunruhe Zyl. 5 | SEG_AD_MMV_ER[1] | - | signed char | - | 0 | 0,061035309 | %. | 1 |
| ILSA3 | 0x58F9 | STAT_LAUFUNRUHE_SEGMENTADAPTION_ZYL3_WERT | Segmentadaption Laufunruhe Zyl. 3 | SEG_AD_MMV_ER[2] | - | signed char | - | 0 | 0,061035309 | %. | 1 |
| - | 0x58FA | STAT_0x58FA_WERT | Beladungsgrad Aktivkohlefilter TEV- Funktionstest | CL_MMV_SAE | - | unsigned char | - | 0 | 0,0078125 | - | 1 |
| - | 0x58FB | STAT_0x58FB_WERT | Zähler Drehzahlerhöhungen TEV- Funktionstest | SUM_DIAG_DIAGCPS_SAE | - | unsigned char | - | 0 | 1 | cyc | 1 |
| - | 0x58FF | - | Umweltbedingung unbekannt | - | - | unsigned char | - | 0 | 1 | - | 1 |
MESSWERTETAB_RK
Dimensions: 7 rows × 12 columns
| ARG | ID | RESULTNAME | KOMMENTAR | LABEL | L/H | DATENTYP | NAME | ADD | MUL | EINHEIT | DIV |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SSPEI | 0x4505 | STAT_VVT_EINLASSSPREIZUNG_SOLL_WERT | Sollwert Einlassspreizung | CAM_SP_IVVT_IN | - | unsigned char | - | 60 | 0,375 | °CRK | 1 |
| ISNWE | 0x4508 | STAT_NW_EINLASSSPREIZUNG_WERT | Istwert Einlassspreizung | CAM_IN[1] | - | unsigned char | - | 60 | 0,375 | °CRK | 1 |
| SUGEB | 0x4602 | STAT_GENERATOR_SPANNUNG_BSD_SOLL_WERT | Generator Sollspannung ueber BSD | V_ALTER_SP | - | unsigned char | - | 10,6 | 0,1 | V | 1 |
| - | 0x581A | STAT_0x581A_WERT | Nockenwelle Einlass | CAM_IN[1] | - | unsigned char | - | 60 | 0,375 | °CRK | 1 |
| - | 0x581B | STAT_0x581B_WERT | Nockenwelle Einlass Sollwert | CAM_SP_IVVT_IN | - | unsigned char | - | 60 | 0,375 | °CRK | 1 |
| ILRR1 | 0x5878 | STAT_LAMBDAVERSCHIEBUNG_RUECKFUEHRREGLER1_WERT | Lambdaverschiebung Rückführregler 1 | LAMB_DELTA_I_LAM_ADJ[1] | - | signed char | - | 0 | 0,015625 | - | 1 |
| ILRR2 | 0x5879 | STAT_LAMBDAVERSCHIEBUNG_RUECKFUEHRREGLER2_WERT | Lambdaverschiebung Rückführregler 2 | LAMB_DELTA_I_LAM_ADJ[2] | - | signed char | - | 0 | 0,015625 | - | 1 |
FDETAILSTRUKTUR
Dimensions: 7 rows × 2 columns
| NAME | TYP |
|---|---|
| F_ART_IND | ja |
| F_ART_ERW | 00654301 |
| F_PCODE | ja |
| F_PCODE7 | nein |
| F_HFK | ja |
| F_LZ | ja |
| F_UWB_ERW | ja |
FARTTEXTEERWEITERT
Dimensions: 11 rows × 3 columns
| ARTMASKE | ARTNR | ARTTEXT |
|---|---|---|
| xxxxxxx0 | 10 | Diagnose läuft nicht |
| xxxxxxx1 | 11 | Diagnose läuft |
| xxxxx0xx | 30 | Zyklus-Flag nicht gesetzt |
| xxxxx1xx | 31 | Zyklus-Flag gesetzt |
| xxxx0xxx | 40 | kein Fehler durch Tester |
| xxxx1xxx | 41 | Fehler durch Tester |
| xxx0xxxx | 50 | MIL aus |
| xxx1xxxx | 51 | MIL ein |
| xx0xxxxx | 60 | Fehler in Entprellphase |
| xx1xxxxx | 61 | Fehler entprellt, keine Scan Tool Ausgabe |
| xxxxxxxx | 0 | -- |
JOBRESULTEXTENDED
Dimensions: 1 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xXY | ERROR_UNKNOWN |
FARTSTATUSTEXTE
Dimensions: 9 rows × 2 columns
| BITNR | BITTEXT |
|---|---|
| 0x00 | nicht aktiv |
| 0x01 | Fehler momentan vorhanden |
| 0x02 | Fehler geprueft |
| 0x11 | E-Flag entprellt |
| 0x12 | CARB-entprellt |
| 0x13 | SCATT-aktiv |
| 0x14 | MIL ein |
| 0x15 | MIL blink |
| 0x16 | Fehler sporadisch |
FARTERWTEXTE
Dimensions: 8 rows × 2 columns
| BITNR | BITTEXT |
|---|---|
| 0x00 | nicht aktiv |
| 0x11 | Diagnose aktiv |
| 0x12 | Diagnose gestoppt |
| 0x13 | Zyklus-Flag gesetzt |
| 0x14 | Error-Flag gesetzt |
| 0x15 | MIL ein |
| 0x16 | Fehler in Entprellphase |
| 0xXY | Status unbekannt |
BITS
Dimensions: 95 rows × 4 columns
| NAME | BYTE | MASK | VALUE |
|---|---|---|---|
| STAT_KL15_EIN | 0 | 0x01 | 0x01 |
| STAT_MOTOR_AUS | 0 | 0x02 | 0x02 |
| STAT_KUPPL_EIN | 0 | 0x04 | 0x04 |
| STAT_BLS_EIN | 0 | 0x08 | 0x08 |
| STAT_BTS_EIN | 0 | 0x10 | 0x10 |
| STAT_KO_EIN | 0 | 0x80 | 0x80 |
| OBD_MIL | 0 | 0x80 | 0x80 |
| OBD_VERBRENNUNGSAUSSETZER_MONITOR | 1 | 0x01 | 0x01 |
| OBD_KRAFTSTOFFSYSTEM_MONITOR | 1 | 0x02 | 0x02 |
| OBD_KOMPONENTEN_MONITOR | 1 | 0x04 | 0x04 |
| OBD_VERBRENNUNGSAUSSETZER_READINESS | 1 | 0x10 | 0x10 |
| OBD_KRAFTSTOFFSYSTEM_READINESS | 1 | 0x20 | 0x20 |
| OBD_KOMPONENTEN_READINESS | 1 | 0x40 | 0x40 |
| OBD_KAT_UEBERWACHUNG_MONITOR | 2 | 0x01 | 0x01 |
| OBD_KAT_HEIZUNG_MONITOR | 2 | 0x02 | 0x02 |
| OBD_TANKENTLUEFTUNG_MONITOR | 2 | 0x04 | 0x04 |
| OBD_SEKUNDAERLUFTSYSTEM_MONITOR | 2 | 0x08 | 0x08 |
| OBD_KLIMA_MONITOR | 2 | 0x10 | 0x10 |
| OBD_LAMBDASONDE_MONITOR | 2 | 0x20 | 0x20 |
| OBD_LAMBDASONDENHEIZUNG_MONITOR | 2 | 0x40 | 0x40 |
| OBD_ABGASRUECKFUEHRUNG_MONITOR | 2 | 0x80 | 0x80 |
| OBD_KAT_UEBERWACHUNG_READINESS | 3 | 0x01 | 0x01 |
| OBD_KAT_HEIZUNG_READINESS | 3 | 0x02 | 0x02 |
| OBD_TANKENTLUEFTUNG_READINESS | 3 | 0x04 | 0x04 |
| OBD_SEKUNDAERLUFTSYSTEM_READINESS | 3 | 0x08 | 0x08 |
| OBD_KLIMA_READINESS | 3 | 0x10 | 0x10 |
| OBD_LAMBDASONDE_READINESS | 3 | 0x20 | 0x20 |
| OBD_LAMBDASONDENHEIZUNG_READINESS | 3 | 0x40 | 0x40 |
| OBD_ABGASRUECKFUEHRUNG_READINESS | 3 | 0x80 | 0x80 |
| OBD_MISSFIRE_MONITOR | 0 | 0x01 | 0x01 |
| OBD_FUEL_MONITOR | 0 | 0x02 | 0x02 |
| OBD_COMPREHENSIVE_MONITOR | 0 | 0x04 | 0x04 |
| OBD_MISSFIRE | 0 | 0x10 | 0x10 |
| OBD_FUELSYSTEM | 0 | 0x20 | 0x20 |
| OBD_COMPREHENSIVE | 0 | 0x40 | 0x40 |
| OBD_KAT_UEBERWACHUNG | 1 | 0x01 | 0x01 |
| OBD_KAT_HEIZUNG | 1 | 0x02 | 0x02 |
| OBD_EVAPORATE | 1 | 0x04 | 0x04 |
| OBD_SEC_AIR | 1 | 0x08 | 0x08 |
| OBD_AC_SYSTEM | 1 | 0x10 | 0x10 |
| OBD_LAMBDA | 1 | 0x20 | 0x20 |
| OBD_LAMBDA_HEATER | 1 | 0x40 | 0x40 |
| OBD_EGR | 1 | 0x80 | 0x80 |
| OBD_KAT_UEBERWACHUNG_MONITOR | 2 | 0x01 | 0x01 |
| OBD_KAT_HEIZUNG_MONITOR | 2 | 0x02 | 0x02 |
| OBD_EVAPORATE_MONITOR | 2 | 0x04 | 0x04 |
| OBD_SEC_AIR_MONITOR | 2 | 0x08 | 0x08 |
| OBD_AC_SYSTEM_MONITOR | 2 | 0x10 | 0x10 |
| OBD_LAMBDA_MONITOR | 2 | 0x20 | 0x20 |
| OBD_LAMBDA_HEATER_MONITOR | 2 | 0x40 | 0x40 |
| OBD_EGR_MONITOR | 2 | 0x80 | 0x80 |
| STAT_STATE_MSW_CAN_PLUS | 0 | 0x03 | 0x01 |
| STAT_STATE_MSW_CAN_MINUS | 0 | 0x03 | 0x02 |
| STAT_STATE_MSW_CAN_SET | 0 | 0x03 | 0x03 |
| STAT_STATE_MSW_CAN_OFF | 0 | 0x04 | 0x04 |
| STAT_LL_EIN | 0 | 0x01 | 0x01 |
| STAT_TEILLAST_EIN | 0 | 0x03 | 0x00 |
| STAT_VL_EIN | 0 | 0x02 | 0x02 |
| STAT_LSHK2_EIN | 0 | 0x04 | 0x04 |
| STAT_LSHK1_EIN | 0 | 0x08 | 0x08 |
| STAT_LSVK2_EIN | 0 | 0x10 | 0x10 |
| STAT_LSVK1_EIN | 0 | 0x20 | 0x20 |
| STAT_LS2_REGELUNG | 0 | 0x40 | 0x40 |
| STAT_LS1_REGELUNG | 0 | 0x80 | 0x80 |
| STAT_KICKDOWN | 1 | 0x04 | 0x04 |
| STAT_FAHRSTUFE | 1 | 0x08 | 0x08 |
| STAT_SCHUBAB | 1 | 0x40 | 0x40 |
| STAT_DK_ABGLEICH | 1 | 0x80 | 0x80 |
| STAT_DYN_LIM_1 | 2 | 0x01 | 0x01 |
| STAT_DYN_LIM_2 | 2 | 0x02 | 0x02 |
| STAT_FEHLER_CLSW | 2 | 0x04 | 0x04 |
| STAT_FEHLER_MFL | 2 | 0x08 | 0x08 |
| STAT_TIMEOUT_EGS1 | 2 | 0x10 | 0x10 |
| STAT_FEHLER_BREMSE | 2 | 0x20 | 0x20 |
| STAT_MON_LEVEL2 | 3 | 0x01 | 0x01 |
| STAT_V_PLAUSIBEL | 3 | 0x02 | 0x02 |
| STAT_NOTLAUF_LL | 3 | 0x04 | 0x04 |
| STAT_NOTLAUF_DK | 3 | 0x08 | 0x08 |
| STAT_FEHLER_VS | 3 | 0x10 | 0x10 |
| STAT_ASR_TIMEOUT | 3 | 0x20 | 0x20 |
| STAT_EGAS_NOTLAUF | 3 | 0x40 | 0x40 |
| STAT_VS_DIF_HOCH | 4 | 0x01 | 0x01 |
| STAT_UEBERN_LANG | 4 | 0x02 | 0x02 |
| STAT_VS_SP_MAX | 4 | 0x04 | 0x04 |
| STAT_EXT_MOMENT | 4 | 0x08 | 0x08 |
| STAT_MFL_AUS | 4 | 0x10 | 0x10 |
| STAT_VS_CAN_LANG | 5 | 0x01 | 0x01 |
| STAT_BESCHL_MON | 5 | 0x02 | 0x02 |
| STAT_HOCHDREH_S | 5 | 0x04 | 0x04 |
| STAT_TAKEOVER_VS | 5 | 0x08 | 0x08 |
| STAT_VS_FIL_LOW | 5 | 0x10 | 0x10 |
| STAT_DREHZAHL_BEG | 5 | 0x20 | 0x20 |
| STAT_BREMSE_AKTIV | 5 | 0x40 | 0x40 |
| STAT_MFL_HARD_OFF | 5 | 0x80 | 0x80 |
| STAT_FS | 1 | 0x04 | 0x04 |
LAMBDASTATUS
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | -- |
| 0x01 | 1 Regelung AUS, Einschaltbedingung noch nicht erfuellt |
| 0x02 | 2 Regelung EIN |
| 0x04 | 3 Regelung AUS wegen Fahrbedingung |
| 0x08 | 4 Regelung AUS wegen erkanntem Fehler |
| 0x10 | 5 Regelung EIN mit Einschraenkung (Sensor Fehler) |
| 0xXY | Status unbekannt |
BETRIEBSSTUNDENSTATUS
Dimensions: 4 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | Betriebsstundenzaehler verstanden und akzeptiert (top_w < 10h) |
| 0x01 | Betriebsstundenzaehler verstanden aber nicht akzeptiert (top_w > 10h) |
| 0x02 | Betriebsstundenzaehler nicht verstanden und nicht akzeptiert |
| 0xXY | Betriebsstundenzaehler kann nicht ausgegeben werden |
STATE_GEAR
Dimensions: 9 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Neutral oder Park/Neutral |
| 0x01 | 1. Gang |
| 0x02 | 2. Gang |
| 0x03 | 3. Gang |
| 0x04 | 4. Gang |
| 0x05 | 5. Gang |
| 0x06 | 6. Gang |
| 0x07 | R Rückwärtsgang |
| 0xFF | FF unbekanntes Getriebe |
STATE_TQ_CAN_PLAUS
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 00 kein externer Eingriff |
| 0x01 | 01 Traktionskontrolle |
| 0x02 | 02 Sequentielles Manuelles Getriebe |
| 0x04 | 04 Getriebesteuerung |
| 0x08 | 08 Abstandsregelung |
| 0x10 | 10 Anti Roll Stabilisierung |
| 0x20 | 20 Servolenkung Typ 2 |
| 0xFF | FF unbekannter Eingriff |
TPS_AD_STEP
Dimensions: 12 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Position Notlauf 1 |
| 0x01 | 1 Position oberer Anschlag |
| 0x02 | 2 Position Notlauf 2 |
| 0x03 | 3 Positionen Ende |
| 0x04 | 4 Adaption Notlauf 1 |
| 0x05 | 5 Adaption oberer Anschlag |
| 0x06 | 6 Adaption Notlauf 2 |
| 0x07 | 7 Adaption unterer Ansschlag |
| 0x08 | 8 Adaption Notlauf |
| 0x09 | 9 Adaption Notlauf 3 |
| 0x0A | 10 Adaption Ende |
| 0xFF | FF Status unbekannt |
_CNV_S_3_STATE_RLY__396
Dimensions: 4 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | Was soll ich hier nur ausgeben ? |
| 0x01 | Relais offen |
| 0x02 | Relais geschlossen |
| 0xFF | FF Status unbekannt |
STATE_CP
Dimensions: 9 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Tankentlüftung nicht aktiv |
| 0x01 | 1 Tankentlüftung keine |
| 0x02 | 2 Tankentlüftung Minimum |
| 0x03 | 3 Tankentlüftung öffnen |
| 0x04 | 4 Tankentlüftung schnell öffnen |
| 0x05 | 5 Tankentlüftung Maximum |
| 0x06 | 6 Tankentlüftung schliessen |
| 0x07 | 7 Tankentlüftung warten auf offen |
| 0xFF | FF Status unbekannt |
STATE_SA
Dimensions: 13 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Systemtest Sekundärluft nicht aktiv |
| 0x01 | 1 Systemtest Sekundärluft verzögert |
| 0x02 | 2 Systemtest Sekundärluft aktiv |
| 0x03 | 3 Systemtest Sekundärluft Unterbrechung |
| 0x04 | 4 Systemtest Sekundärluft Pumpe verzögert |
| 0x05 | 5 Systemtest Sekundärluft nicht aktiv |
| 0x06 | 6 Systemtest Sekundärluft abgebrochen |
| 0x07 | 7 Sekundärluft externe Ansteuerung |
| 0x08 | 8 Sekundärluft externe Ansteuerung beendet |
| 0x09 | 9 Bandendetest Sekundärluft aktiv |
| 0x0A | 10 Bandendetest Sekundärluft Pumpe |
| 0x0B | 11 Bandendetest Sekundärluft Ende |
| 0xFF | FF Status unbekannt |
VAL_MO3_ERR_CODE_MU
Dimensions: 22 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 kein Fehler |
| 0x01 | 1 Falscher Header in der Kommunikation |
| 0x02 | 2 Fehler Prüfsumme in Kommunikation |
| 0x03 | 3 Fehler Ausgang Extension |
| 0x04 | 4 MU passt nicht zu MC Software |
| 0x05 | 5 Timeout Fehler Maximum |
| 0x06 | 6 Timeout Fehler Minimum |
| 0x07 | 7 RAM Fehler |
| 0x08 | 8 ROM Fehler |
| 0x09 | 9 Fehler Level 2 |
| 0x0A | 10 Redundant switch off path was triggerd by MC |
| 0x0B | 11 Programmablauf Überwachung 1 |
| 0x0C | 12 Programmablauf Überwachung 2 |
| 0x0D | 13 Programmablauf Überwachung 3 |
| 0x0E | 14 Programmablauf Überwachung 4 |
| 0x0F | 15 Programmablauf Überwachung 5 |
| 0x10 | 16 Programmablauf Überwachung 6 |
| 0x11 | 17 Programmablauf Überwachung 7 |
| 0x12 | 18 Programmablauf Überwachung 8 |
| 0x13 | 19 Watchdog Fehler |
| 0x14 | 20 Fehler Kommunikation, falsches enable Byte |
| 0xFF | FF Status unbekannt |
VAL_MO3_ERR_CODE_MC
Dimensions: 14 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 kein Fehler |
| 0x01 | 1 Fehler Prüfsumme in Kommunikation |
| 0x02 | 2 Falscher Header von MU |
| 0x03 | 3 Predrive Check: MU schaltet Endstufen nicht ab |
| 0x04 | 4 SW Referenz: MU sendet falsche SW Version |
| 0x05 | 5 SW Referenz: MU sendet falschen Varianten code |
| 0x06 | 6 Kopie Prozessüberwachung: MU incrementiert nicht ABC_CPM_MU |
| 0x07 | 7 Kopie Prozessüberwachung: MU incrementiert nicht Frage |
| 0x08 | 8 Programmablauf: MU ändert nicht die Kontrollbits |
| 0x09 | 9 ROM Test Level 2 |
| 0x0A | 10 RAM Test Level 2 |
| 0x0B | 11 ROM Test Level 1 |
| 0x0C | 12 ROM Test Level 2 |
| 0xFF | FF Status unbekannt |
CONF_SOF_SWI
Dimensions: 4 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 kein Sporttaster |
| 0x01 | 1 Sporttaster vorhanden |
| 0x02 | 2 Sporttaster mit SSG |
| 0xFF | FFStatus unbekannt |
STATE_MSW_CAN
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 keine Taste gedrückt |
| 0x01 | 1 Beschleunigen / Taste+ |
| 0x02 | 2 Verlangsamen / Taste- |
| 0x03 | 3 Taste Setzen / Wiederaufnahme |
| 0x04 | 4 Taste I/O |
| 0x06 | 6 Fehler |
| 0x07 | 7 kein Text in Spec |
| 0xFF | FFStatus unbekannt |
EWSSTART
Dimensions: 5 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | DME bereit Startwert zu empfangen |
| 0x01 | kein freier Startwert Speicherplatz vorhanden |
| 0x02 | noch kein Startwert gespeichert |
| 0x03 | Startwert nicht plausibel |
| 0xXY | unbekannter Status |
EWSEMPFANGSSTATUS
Dimensions: 10 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | Startwert verstanden und akzeptiert |
| 0x01 | Startwert verstanden aber nicht akzeptiert |
| 0x02 | Startwert nicht verstanden |
| 0x03 | Interfacefehler: Frame oder Parity oder Timeout |
| 0x04 | Prozess laeuft |
| 0x05 | Startwert Programmierung/Synchronisation wird nicht ausgefuehrt in diesem Zyklus |
| 0x06 | Dieselbe Zufallszahl wie beim letzten Start |
| 0x07 | Kein Startwert programmiert |
| 0x21 | 2 aus 3 Startwert im Flasch nicht ok |
| 0xXY | unbekannter Status |
STATE_DIAGCPS
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 00 Systemtest TEV Initialisierung |
| 0x01 | 01 Systemtest TEV Schritt 1 |
| 0x02 | 02 Systemtest TEV Schritt 2 |
| 0x03 | 03 Systemtest TEV Schritt 3 |
| 0x04 | 04 Systemtest TEV Rampe |
| 0x05 | 05 Systemtest TEV abgeschlossen LOCK_STEP |
| 0xXY | FF Systemtest TEV unbekannter Wert |
FUNKTIONSTATUS
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Funktion nicht aktiv |
| 0x01 | 1 Systemtest kann nicht gestartet werden |
| 0x05 | 5 Systemtest ist nicht gestartet |
| 0x06 | 6 Systemtest ist beendet |
| 0x07 | 7 Externe Ansteuerung gestartet |
| 0x08 | 8 Externe Ansteuerung beendet |
| 0xXY | Status kann nicht ausgegeben werden |
DIAGNOSE_STATUS
Dimensions: 5 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x01 | 01 Systemtest läuft |
| 0x03 | 03 Systemtest beendet, Messwerte gültig |
| 0x06 | 06 Systemtest Start nicht möglich |
| 0x07 | 07 Systemtest nicht gestartet |
| 0xXY | FF Systemtest unbekannter Wert |
DIAGNOSE_DMTL_WERT
Dimensions: 26 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Start |
| 0x01 | 1 Referenzleck Messung |
| 0x02 | 2 Grobleck Messung Start |
| 0x03 | 3 Grobleck Messung erweitert |
| 0x04 | 4 Grobleck Messung beendet |
| 0x05 | 5 Feinleck Messung Start |
| 0x06 | 6 Feinleck Messung erweitert |
| 0x07 | 7 2. Referenzleck Messung |
| 0x08 | 8 Tank geprüft |
| 0x09 | 9 Feinleck |
| 0x0A | A Grobleck |
| 0x0B | B Modulfehler |
| 0x0C | C Ende |
| 0x11 | 11 Batteriespannung aus gültigem Bereich |
| 0x12 | 12 elektrischer Fehler |
| 0x21 | 21 Tank Nachfüllen festgestellt |
| 0x22 | 22 Tankverschluss offen |
| 0x23 | 23 Batteriespannung Fluktuation zu hoch |
| 0x24 | 24 Diagnose maximale Zeit erreicht |
| 0x25 | 25 Fluktuationen Referenzstrom zu hoch |
| 0x26 | 26 Pumpenstrom abgefallen während der Messung |
| 0x0100 | 1 Funktion läuft |
| 0x0300 | 3 Werte gültig |
| 0x0600 | 6 Start verhindert |
| 0x0700 | 7 nicht gestartet |
| 0xXY | XY Status kann nicht ausgegeben werden |
STATUS_EOL
Dimensions: 6 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x01 | 01 Systemtest läuft |
| 0x03 | 03 Systemtest beendet, Messwerte gültig |
| 0x05 | 05 Systemtest abgebrochen, keine Werte |
| 0x06 | 06 Systemtest Start nicht möglich |
| 0x07 | 07 Systemtest nicht gestartet |
| 0xXY | FF Systemtest unbekannter Wert |
EOL_STATUS
Dimensions: 10 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Funktionstest läuft |
| 0x01 | 1 Startbedingungen nicht erfüllt |
| 0x02 | 2 Übergabeparameter nicht plausibel |
| 0x03 | 3 Funktion wartet auf Freigabe |
| 0x05 | 5 Funktion noch nicht gestartet |
| 0x06 | 6 Funktion beendet |
| 0x07 | 7 Funktion abgebrochen |
| 0x08 | 8 Funktion durchlaufen und kein Fehler erkannt |
| 0x09 | 9 Funktion durchlaufen und Fehler erkannt |
| 0xFF | FF Status kann nicht ausgegeben werden |
SYSTEMCHECK_STATE_CHK_LS
Dimensions: 5 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Diagnose Anfang |
| 0x01 | 1 Diagnose Schritt FETT |
| 0x02 | 2 Diagnose Schritt MAGER |
| 0x03 | 3 Diagnose Ende |
| 0xFF | XY Status kann nicht ausgegeben werden |
STATE_DIAG_SA_LS
Dimensions: 10 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Systemtest SLS nicht aktiv |
| 0x01 | 1 Systemtest SLS wartet |
| 0x02 | 2 Systemtest SLS Luftmassen Überwachung |
| 0x03 | 3 Systemtest SLS Diagnose unterbrochen |
| 0x04 | 4 Systemtest SLS wartet auf Ventil Diagnose |
| 0x05 | 5 Systemtest SLS Ventil Diagnose |
| 0x06 | 6 Systemtest SLS in Prüfung |
| 0x07 | 7 Systemtest SLS beendet |
| 0x08 | 8 Systemtest SLS abgebrochen |
| 0xFF | XY Status kann nicht ausgegeben werden |
STATE_VLS_EOL
Dimensions: 13 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 0 Diagnose nicht aktiv |
| 0x01 | 1 Diagnose Schritt 1 |
| 0x02 | 2 Diagnose Schritt 2 |
| 0x10 | 10 Diagnose beendet, Sonden OK |
| 0x11 | 11 Diagnose beendet, Sonden vor Kat vertauscht |
| 0x12 | 12 Diagnose beendet, Sonden nach Kat vertauscht |
| 0x13 | 13 Diagnose beendet, Sonden vor und nach Kat vertauscht |
| 0x14 | 14 Diagnose beendet, Sonden vor Kat Bank 1 nicht plausibel |
| 0x15 | 15 Diagnose beendet, Sonden vor Kat Bank 2 nicht plausibel |
| 0x16 | 16 Diagnose beendet, Sonden nach Kat Bank 1 nicht plausibel |
| 0x17 | 17 Diagnose beendet, Sonden nach Kat Bank 2 nicht plausibel |
| 0x18 | 18 Diagnose beendet, keine brauchbaren Ergebnisse |
| 0xFF | FF Status kann nicht ausgegeben werden |
STATUS_REGLER_LSH_DOWN
Dimensions: 7 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 00 Heizung aus |
| 0x01 | 01 Heizung Vorheizphase |
| 0x02 | 02 Heizung langsam herunterregeln |
| 0x03 | 03 Heizung schnell herunterregelm |
| 0x04 | 04 Heizung langsam heraufregeln |
| 0x05 | 05 Batteriespannung Schutz |
| 0xXY | FF Heizung unbekannter Wert |
STATUS_REGLER_LSH_UP
Dimensions: 8 rows × 2 columns
| WERT | UWTEXT |
|---|---|
| 0x00 | 00 Heizung aus |
| 0x01 | 01 Heizung langsam heraufregeln |
| 0x02 | 02 Heizung schnell herunterregelm |
| 0x03 | 03 Heizung langsam herunterregeln |
| 0x04 | 04 Heizung Regelung aktiv |
| 0x05 | 05 Batteriespannung Schutz |
| 0x06 | 06 Temperatur Schutz |
| 0xXY | FF Heizung unbekannter Wert |
KONZEPT_TABELLE
Dimensions: 4 rows × 2 columns
| NR | KONZEPT_TEXT |
|---|---|
| 0x0F | BMW-FAST |
| 0x0D | KWP2000* |
| 0x0C | KWP2000 |
| 0x06 | DS2 |
JOBRESULT
Dimensions: 95 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0x10 | ERROR_ECU_GENERAL_REJECT |
| 0x11 | ERROR_ECU_SERVICE_NOT_SUPPORTED |
| 0x12 | ERROR_ECU_SUBFUNCTION_NOT_SUPPORTED__INVALID_FORMAT |
| 0x21 | ERROR_ECU_BUSY_REPEAT_REQUEST |
| 0x22 | ERROR_ECU_CONDITIONS_NOT_CORRECT_OR_REQUEST_SEQUENCE_ERROR |
| 0x23 | ERROR_ECU_ROUTINE_NOT_COMPLETE |
| 0x31 | ERROR_ECU_REQUEST_OUT_OF_RANGE |
| 0x33 | ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_REQUESTED |
| 0x36 | ERROR_ECU_EXCEED_NUMBER_OF_ATTEMPTS |
| 0x37 | ERROR_ECU_REQUIRED_TIME_DELAY_NOT_EXPIRED |
| 0x40 | ERROR_ECU_DOWNLOAD_NOT_ACCEPTED |
| 0x41 | ERROR_ECU_IMPROPER_DOWNLOAD_TYPE |
| 0x42 | ERROR_ECU_CANNOT_DOWNLOAD_TO_SPECIFIED_ADDRESS |
| 0x43 | ERROR_ECU_CANNOT_DOWNLOAD_NUMBER_OF_BYTES_REQUESTED |
| 0x50 | ERROR_ECU_UPLOAD_NOT_ACCEPTED |
| 0x51 | ERROR_ECU_IMPROPER_UPLOAD_TYPE |
| 0x52 | ERROR_ECU_CANNOT_UPLOAD_FROM_SPECIFIED_ADDRESS |
| 0x53 | ERROR_ECU_CANNOT_UPLOAD_NUMBER_OF_BYTES_REQUESTED |
| 0x71 | ERROR_ECU_TRANSFER_SUSPENDED |
| 0x72 | ERROR_ECU_TRANSFER_ABORTED |
| 0x74 | ERROR_ECU_ILLEGAL_ADDRESS_IN_BLOCK_TRANSFER |
| 0x75 | ERROR_ECU_ILLEGAL_BYTE_COUNT_IN_BLOCK_TRANSFER |
| 0x76 | ERROR_ECU_ILLEGAL_BLOCK_TRANSFER_TYPE |
| 0x77 | ERROR_ECU_BLOCKTRANSFER_DATA_CHECKSUM_ERROR |
| 0x78 | ERROR_ECU_REQUEST_CORRECTLY_RECEIVED__RESPONSE_PENDING |
| 0x79 | ERROR_ECU_INCORRECT_BYTE_COUNT_DURING_BLOCK_TRANSFER |
| 0x80 | ERROR_ECU_SERVICE_NOT_SUPPORTED_IN_ACTIVE_DIAGNOSTIC_MODE |
| ?00? | OKAY |
| ?02? | ERROR_ECU_INCORRECT_RESPONSE_ID |
| ?03? | ERROR_ECU_INCORRECT_LEN |
| ?04? | ERROR_ECU_INCORRECT_LIN_RESPONSE_ID |
| ?05? | ERROR_ECU_INCORRECT_LIN_LEN |
| ?10? | ERROR_F_CODE |
| ?11? | ERROR_TABLE |
| ?12? | ERROR_INTERPRETATION |
| ?13? | ERROR_F_POS |
| ?20? | ERROR_SEGMENT |
| ?21? | ERROR_ADDRESS |
| ?22? | ERROR_NUMBER |
| ?30? | ERROR_DATA |
| ?40? | ERROR_MODE |
| ?41? | ERROR_BAUDRATE |
| ?50? | ERROR_BYTE1 |
| ?51? | ERROR_BYTE2 |
| ?52? | ERROR_BYTE3 |
| ?60? | ERROR_DATA_OUT_OF_RANGE |
| ?70? | ERROR_NUMBER_ARGUMENT |
| ?71? | ERROR_RANGE_ARGUMENT |
| ?72? | ERROR_VERIFY |
| ?73? | ERROR_NO_BIN_BUFFER |
| ?74? | ERROR_BIN_BUFFER |
| ?75? | ERROR_DATA_TYPE |
| ?76? | ERROR_CHECKSUM |
| ?80? | ERROR_FLASH_SIGNATURE_CHECK |
| ?81? | ERROR_VIHICLE_IDENTFICATON_NR |
| ?82? | ERROR_PROGRAMMING_DATE |
| ?83? | ERROR_ASSEMBLY_NR |
| ?84? | ERROR_CALIBRATION_DATASET_NR |
| ?85? | ERROR_EXHAUST_REGULATION_OR_TYPE_APPROVAL_NR |
| ?86? | ERROR_REPAIR_SHOP_NR |
| ?87? | ERROR_TESTER_SERIAL_NR |
| ?88? | ERROR_MILAGE |
| ?89? | ERROR_PROGRAMMING_REFERENCE |
| ?8A? | ERROR_NO_FREE_UIF |
| ?8B? | ERROR_MAX_UIF |
| ?8C? | ERROR_SIZE_UIF |
| ?8D? | ERROR_LEVEL |
| ?8E? | ERROR_KEY |
| ?8F? | ERROR_AUTHENTICATION |
| ?90? | ERROR_NO_DREF |
| ?91? | ERROR_CHECK_PECUHN |
| ?92? | ERROR_CHECK_PRGREF |
| ?93? | ERROR_AIF_NR |
| ?94? | ERROR_CHECK_DREF |
| ?95? | ERROR_CHECK_HWREF |
| ?96? | ERROR_CHECK_HWREF |
| ?97? | ERROR_CHECK_PRGREFB |
| ?98? | ERROR_CHECK_VMECUH*NB |
| ?99? | ERROR_CHECK_PRGREFB |
| ?9A? | ERROR_CHECK_VMECUH*N |
| ?9B? | ERROR_MOST_CAN_GATEWAY_DISABLE |
| ?9C? | ERROR_NO_P2MIN |
| ?9D? | ERROR_NO_P2MAX |
| ?9E? | ERROR_NO_P3MIN |
| ?9F? | ERROR_NO_P3MAX |
| ?A0? | ERROR_NO_P4MIN |
| ?B0? | ERROR_DIAG_PROT |
| ?B1? | ERROR_SG_ADRESSE |
| ?B2? | ERROR_SG_MAXANZAHL_AIF |
| ?B3? | ERROR_SG_GROESSE_AIF |
| ?B4? | ERROR_SG_ENDEKENNUNG_AIF |
| ?B5? | ERROR_SG_AUTHENTISIERUNG |
| ?C0? | ERROR_TELEGRAM_LEN_OUT_OFF_RANGE |
| ?F0? | ERROR_ARGUMENT |
| 0xXY | ERROR_ECU_UNKNOWN_NEGATIVE_RESPONSE |
LIEFERANTEN
Dimensions: 76 rows × 2 columns
| LIEF_NR | LIEF_TEXT |
|---|---|
| 0x01 | Reinshagen => Delphi |
| 0x02 | Kostal |
| 0x03 | Hella |
| 0x04 | Siemens |
| 0x05 | Eaton |
| 0x06 | UTA |
| 0x07 | Helbako |
| 0x08 | Bosch |
| 0x09 | Loewe => Lear |
| 0x10 | VDO |
| 0x11 | Valeo |
| 0x12 | MBB |
| 0x13 | Kammerer |
| 0x14 | SWF |
| 0x15 | Blaupunkt |
| 0x16 | Philips |
| 0x17 | Alpine |
| 0x18 | Continental Teves |
| 0x19 | Elektromatik Suedafrika |
| 0x20 | Becker |
| 0x21 | Preh |
| 0x22 | Alps |
| 0x23 | Motorola |
| 0x24 | Temic |
| 0x25 | Webasto |
| 0x26 | MotoMeter |
| 0x27 | Delphi PHI |
| 0x28 | DODUCO => BERU |
| 0x29 | DENSO |
| 0x30 | NEC |
| 0x31 | DASA |
| 0x32 | Pioneer |
| 0x33 | Jatco |
| 0x34 | Fuba |
| 0x35 | UK-NSI |
| 0x36 | AABG |
| 0x37 | Dunlop |
| 0x38 | Sachs |
| 0x39 | ITT |
| 0x40 | FTE |
| 0x41 | Megamos |
| 0x42 | TRW |
| 0x43 | Wabco |
| 0x44 | ISAD Electronic Systems |
| 0x45 | HEC (Hella Electronics Corporation) |
| 0x46 | Gemel |
| 0x47 | ZF |
| 0x48 | GMPT |
| 0x49 | Harman Kardon |
| 0x50 | Remes |
| 0x51 | ZF Lenksysteme |
| 0x52 | Magneti Marelli |
| 0x53 | Borg Instruments |
| 0x54 | GETRAG |
| 0x55 | BHTC (Behr Hella Thermocontrol) |
| 0x56 | Siemens VDO Automotive |
| 0x57 | Visteon |
| 0x58 | Autoliv |
| 0x59 | Haberl |
| 0x60 | Magna Steyr |
| 0x61 | Marquardt |
| 0x62 | AB-Elektronik |
| 0x63 | Siemens VDO Borg |
| 0x64 | Hirschmann Electronics |
| 0x65 | Hoerbiger Electronics |
| 0x66 | Thyssen Krupp Automotive Mechatronics |
| 0x67 | Gentex GmbH |
| 0x68 | Atena GmbH |
| 0x69 | Magna-Donelly |
| 0x70 | Koyo Steering Europe |
| 0x71 | NSI B.V |
| 0x72 | ASIN AWCO.LTD |
| 0x73 | Shorlock |
| 0x74 | Schrader |
| 0x75 | BERU Electronics GmbH |
| 0xFF | unbekannter Hersteller |
FARTTEXTE
Dimensions: 14 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | kein passendes Fehlersymptom |
| 0x01 | Signal oder Wert oberhalb Schwelle |
| 0x02 | Signal oder Wert unterhalb Schwelle |
| 0x04 | kein Signal oder Wert |
| 0x08 | unplausibles Signal oder Wert |
| 0x10 | Testbedingungen erfüllt |
| 0x11 | Testbedingungen noch nicht erfüllt |
| 0x20 | Fehler momentan nicht vorhanden, nicht OBD-entprellt |
| 0x21 | Fehler momentan nicht vorhanden, OBD-entprellt |
| 0x22 | Fehler momentan vorhanden, noch nicht OBD-entprellt |
| 0x23 | Fehler momentan vorhanden, OBD-entprellt |
| 0x30 | Fehler verursacht kein Aufleuchten der Warnlampe (MIL) |
| 0x31 | Fehler wuerde das Aufleuchten der Warnlampe (MIL) verursachen |
| 0xFF | unbekannte Fehlerart |
DIGITALARGUMENT
Dimensions: 17 rows × 2 columns
| TEXT | WERT |
|---|---|
| ein | 1 |
| aus | 0 |
| ja | 1 |
| nein | 0 |
| auf | 1 |
| ab | 0 |
| an | 1 |
| yes | 1 |
| no | 0 |
| on | 1 |
| off | 0 |
| up | 1 |
| down | 0 |
| true | 1 |
| false | 0 |
| 1 | 1 |
| 0 | 0 |
AUTHENTISIERUNG
Dimensions: 4 rows × 2 columns
| AUTH_NR | AUTH_TEXT |
|---|---|
| 0x01 | Simple |
| 0x02 | Symetrisch |
| 0x03 | Asymetrisch |
| 0xFF | Keine |
SPEICHERSEGMENT
Dimensions: 12 rows × 3 columns
| SEG_BYTE | SEG_NAME | SEG_TEXT |
|---|---|---|
| 0x00 | LAR | linearAdressRange |
| 0x01 | ROMI | ROM / EPROM, internal |
| 0x02 | ROMX | ROM / EPROM, external |
| 0x03 | NVRAM | NV-RAM (characteristic zones, DTC memory |
| 0x04 | RAMIS | RAM, internal (short MOV) |
| 0x05 | RAMXX | RAM, external (x data MOV) |
| 0x06 | FLASH | Flash EPROM, internal |
| 0x07 | UIFM | User Info Field Memory |
| 0x08 | VODM | Vehicle Order Data Memory |
| 0x09 | FLASHX | Flash EPROM, external |
| 0x0B | RAMIL | RAM, internal (long MOV / Register) |
| 0xFF | ??? | unbekanntes Speichersegment |
CBSKENNUNG
Dimensions: 16 rows × 3 columns
| NR | CBS_K | CBS_K_TEXT |
|---|---|---|
| 0x01 | Oel | Motoroel |
| 0x02 | Br_v | Bremsbelag vorne |
| 0x03 | Brfl | Bremsfluessigkeit |
| 0x04 | Filt | Mikrofilter |
| 0x06 | Br_h | Bremsbelag hinten |
| 0x07 | CSF | Dieselpartikelfilter |
| 0x08 | Batt | Batterie |
| 0x09 | VTG | Verteilergetriebeoel |
| 0x10 | ZKrz | Zuendkerzen |
| 0x11 | Sic | Sichtpruefung/Fahrzeug-Check |
| 0x12 | Kfl | Kuehlfluessigkeit |
| 0x13 | H2 | H2-Check |
| 0x14 | Ueb | Uebergabedurchsicht |
| 0x16 | DAD | Additiv fuer Partikelfilter |
| 0x20 | TUV | §Fahrzeuguntersuchung |
| 0x21 | AU | §Abgasuntersuchung |
STAT_RUHESTROM
Dimensions: 17 rows × 2 columns
| WERT | TEXT |
|---|---|
| 0x00 | 0 keine Ruhestromverletzung, keine Standverbraucher aktiv |
| 0x01 | 1 Ruhestrom 80 bis 200mA aktiv, keine Standverbraucher aktiv |
| 0x02 | 2 Ruhestrom 200 bis 1000mA aktiv, keine Standverbraucher aktiv |
| 0x03 | 3 Ruhestrom über 1000mA aktiv, keine Standverbraucher aktiv |
| 0x04 | 4 keine Ruhestromverletzung, Standverbraucher Licht aktiv |
| 0x05 | 5 Ruhestrom 80 bis 200mA aktiv, Standverbraucher Licht aktiv |
| 0x06 | 6 Ruhestrom 200 bis 1000mA aktiv, Standverbraucher Licht aktiv |
| 0x07 | 7 Ruhestrom über 1000mA aktiv, Standverbraucher Licht aktiv |
| 0x08 | 8 keine Ruhestromverletzung, Standverbraucher Standheizung aktiv |
| 0x09 | 9 Ruhestrom 80 bis 200mA aktiv, Standverbraucher Standheizung aktiv |
| 0x0A | 10 Ruhestrom 200 bis 1000mA aktiv, Standverbraucher Standheizung aktiv |
| 0x0B | 11 Ruhestrom über 1000mA aktiv, Standverbraucher Standheizung aktiv |
| 0x0C | 12 keine Ruhestromverletzung, Standverbraucher Sonstige aktiv |
| 0x0D | 13 Ruhestrom 80 bis 200mA aktiv, Standverbraucher Sonstige aktiv |
| 0x0E | 14 Ruhestrom 200 bis 1000mA aktiv, Standverbraucher Sonstige aktiv |
| 0x0F | 15 Ruhestrom über 1000mA aktiv, Standverbraucher Sonstige aktiv |
| 0xFF | 255 Status unbekannt |
_EISYUGD_FASTA
Dimensions: 9 rows × 5 columns
| NR | NKW_WERT | VSE_SPRI_WERT | VSA_SPRI_WERT | HUBEV_IST_WERT |
|---|---|---|---|---|
| 0x00 | 660 | 85.00 | 110.0 | 0.35 |
| 0x01 | 1000 | 90.00 | 105.0 | 6.50 |
| 0x02 | 1500 | 80.00 | 117.0 | 0.50 |
| 0x03 | 2000 | 51.00 | 69.00 | 2.70 |
| 0x04 | 2500 | 81.00 | 117.0 | 0.78 |
| 0x05 | 2500 | 70.00 | 100.0 | 9.70 |
| 0x06 | 4000 | 62.00 | 76.00 | 4.10 |
| 0x07 | 6000 | 115.0 | 105.0 | 9.70 |
| 0xFF | 0 | 0 | 0 | 0 |
_EISYGD_FASTA
Dimensions: 5 rows × 5 columns
| NR | NKW_WERT | VSE_SPRI_WERT | VSA_SPRI_WERT | WDK_IST_WERT |
|---|---|---|---|---|
| 0x00 | 660 | 120.0 | 115.0 | 3.00 |
| 0x01 | 1000 | 100.0 | 90.00 | 8.00 |
| 0x02 | 1500 | 85.00 | 80.00 | 15.0 |
| 0x03 | 3000 | 90.00 | 100.0 | 30.0 |
| 0xFF | 0 | 0 | 0 | 0 |
_KRANN_FASTA
Dimensions: 7 rows × 4 columns
| NR | NKW_WERT | RF_WERT | TANS_WERT |
|---|---|---|---|
| 0x00 | 1000 | 60 | 30 |
| 0x01 | 2000 | 85 | 30 |
| 0x02 | 2500 | 40 | 30 |
| 0x03 | 2900 | 85 | 30 |
| 0x04 | 5000 | 80 | 30 |
| 0x05 | 6000 | 80 | 30 |
| 0xFF | 0 | 0 | 0 |
_EISYUGD_INPA
Dimensions: 145 rows × 5 columns
| NR | NKW_WERT | VSE_SPRI_WERT | VSA_SPRI_WERT | HUBEV_IST_WERT |
|---|---|---|---|---|
| 0x00 | 660 | 84.8000 | 114.470 | 0.295467 |
| 0x01 | 720 | 84.4127 | 113.987 | 0.311767 |
| 0x02 | 900 | 80.9271 | 111.686 | 0.381667 |
| 0x03 | 1200 | 74.1944 | 107.850 | 0.506900 |
| 0x04 | 1500 | 68.7327 | 105.293 | 0.646500 |
| 0x05 | 2000 | 69.2935 | 105.293 | 0.861500 |
| 0x06 | 2500 | 71.4243 | 103.589 | 1.027500 |
| 0x07 | 3000 | 72.2243 | 101.032 | 1.254750 |
| 0x08 | 4000 | 76.5657 | 102.452 | 1.567060 |
| 0x09 | 5000 | 78.0336 | 106.998 | 1.919500 |
| 0x0A | 6000 | 78.0336 | 108.277 | 2.325500 |
| 0x0B | 7000 | 80.1645 | 108.703 | 2.401500 |
| 0x0C | 660 | 84.1067 | 105.653 | 0.408600 |
| 0x0D | 720 | 82.8800 | 104.160 | 0.428533 |
| 0x0E | 900 | 72.8000 | 98.4000 | 0.532333 |
| 0x0F | 1200 | 62.0000 | 90.4000 | 0.734000 |
| 0x10 | 1500 | 55.6000 | 84.0000 | 0.950000 |
| 0x11 | 2000 | 53.6000 | 82.4000 | 1.550000 |
| 0x12 | 2500 | 53.6000 | 82.4000 | 1.900000 |
| 0x13 | 3000 | 57.2000 | 78.0000 | 2.055000 |
| 0x14 | 4000 | 62.9333 | 80.3556 | 2.255560 |
| 0x15 | 5000 | 68.8000 | 86.4000 | 2.607000 |
| 0x16 | 6000 | 68.8000 | 87.2000 | 3.000000 |
| 0x17 | 7000 | 76.0000 | 88.0000 | 3.070000 |
| 0x18 | 660 | 76.0533 | 96.2667 | 0.548600 |
| 0x19 | 720 | 74.1867 | 94.6667 | 0.579333 |
| 0x1A | 900 | 65.0667 | 89.8667 | 0.708333 |
| 0x1B | 1200 | 56.4000 | 82.8000 | 0.956000 |
| 0x1C | 1500 | 52.4000 | 77.2000 | 1.450000 |
| 0x1D | 2000 | 51.2000 | 71.2000 | 2.141000 |
| 0x1E | 2500 | 52.8000 | 70.4000 | 2.551000 |
| 0x1F | 3000 | 54.4000 | 70.8000 | 2.805000 |
| 0x20 | 4000 | 60.0889 | 72.7111 | 2.917560 |
| 0x21 | 5000 | 64.8000 | 84.8000 | 3.042000 |
| 0x22 | 6000 | 67.2000 | 88.0000 | 3.400000 |
| 0x23 | 7000 | 75.2000 | 88.0000 | 3.457000 |
| 0x24 | 660 | 68.0533 | 91.7867 | 0.674533 |
| 0x25 | 720 | 66.5067 | 89.4933 | 0.726667 |
| 0x26 | 900 | 60.2667 | 81.3333 | 0.966667 |
| 0x27 | 1200 | 54.8000 | 74.0000 | 1.260000 |
| 0x28 | 1500 | 52.0000 | 70.0000 | 1.700000 |
| 0x29 | 2000 | 51.2000 | 68.8000 | 2.715000 |
| 0x2A | 2500 | 51.2000 | 68.8000 | 3.231000 |
| 0x2B | 3000 | 53.6000 | 66.4000 | 3.660000 |
| 0x2C | 4000 | 55.2000 | 73.1556 | 3.772110 |
| 0x2D | 5000 | 63.2000 | 86.4000 | 3.554000 |
| 0x2E | 6000 | 68.8000 | 88.8000 | 4.057000 |
| 0x2F | 7000 | 74.4000 | 88.8000 | 4.057000 |
| 0x30 | 660 | 63.1467 | 91.6800 | 0.865867 |
| 0x31 | 720 | 62.0267 | 89.4933 | 0.926667 |
| 0x32 | 900 | 58.6667 | 81.3333 | 1.166670 |
| 0x33 | 1200 | 54.8000 | 73.6000 | 1.540000 |
| 0x34 | 1500 | 52.8000 | 70.0000 | 2.000000 |
| 0x35 | 2000 | 52.8000 | 68.8000 | 3.075000 |
| 0x36 | 2500 | 54.4000 | 68.8000 | 3.865000 |
| 0x37 | 3000 | 53.6000 | 66.4000 | 4.092500 |
| 0x38 | 4000 | 59.5556 | 75.5556 | 3.979890 |
| 0x39 | 5000 | 64.8000 | 88.0000 | 3.950000 |
| 0x3A | 6000 | 75.2000 | 87.2000 | 4.420000 |
| 0x3B | 7000 | 78.4000 | 87.2000 | 4.420000 |
| 0x3C | 660 | 60.6400 | 91.5733 | 1.114530 |
| 0x3D | 720 | 59.7867 | 89.4933 | 1.203330 |
| 0x3E | 900 | 57.8667 | 81.3333 | 1.683330 |
| 0x3F | 1200 | 56.0000 | 73.2000 | 2.070000 |
| 0x40 | 1500 | 54.8000 | 69.2000 | 2.150000 |
| 0x41 | 2000 | 56.0000 | 68.0000 | 3.500000 |
| 0x42 | 2500 | 56.0000 | 70.4000 | 4.268000 |
| 0x43 | 3000 | 57.6000 | 68.0000 | 4.301000 |
| 0x44 | 4000 | 63.4667 | 77.0667 | 4.194670 |
| 0x45 | 5000 | 70.4000 | 89.6000 | 4.132000 |
| 0x46 | 6000 | 79.2000 | 88.8000 | 4.663000 |
| 0x47 | 7000 | 80.8000 | 88.8000 | 4.663000 |
| 0x48 | 660 | 66.7745 | 94.2034 | 1.744750 |
| 0x49 | 720 | 66.5081 | 92.9241 | 1.867950 |
| 0x4A | 900 | 66.5081 | 88.6071 | 2.430140 |
| 0x4B | 1200 | 66.0075 | 81.9584 | 2.822470 |
| 0x4C | 1500 | 65.2566 | 76.8075 | 2.942470 |
| 0x4D | 2000 | 60.4025 | 71.8038 | 3.901520 |
| 0x4E | 2500 | 63.4063 | 71.4013 | 4.658550 |
| 0x4F | 3000 | 64.9547 | 71.0528 | 4.746730 |
| 0x50 | 4000 | 70.0931 | 80.1129 | 4.406960 |
| 0x51 | 5000 | 74.3019 | 94.3019 | 4.660330 |
| 0x52 | 6000 | 79.7987 | 94.0025 | 5.242290 |
| 0x53 | 7000 | 80.8981 | 94.0025 | 5.242290 |
| 0x54 | 660 | 76.2503 | 98.7295 | 2.421350 |
| 0x55 | 720 | 76.2141 | 98.2628 | 2.580020 |
| 0x56 | 900 | 76.2141 | 97.2856 | 3.180620 |
| 0x57 | 1200 | 75.6784 | 91.5499 | 3.697140 |
| 0x58 | 1500 | 72.6285 | 83.8356 | 3.757640 |
| 0x59 | 2000 | 63.7142 | 79.4141 | 4.171430 |
| 0x5A | 2500 | 67.9857 | 80.4569 | 4.954070 |
| 0x5B | 3000 | 75.1284 | 79.0070 | 5.094960 |
| 0x5C | 4000 | 80.0173 | 83.0333 | 4.686980 |
| 0x5D | 5000 | 80.4856 | 97.3142 | 5.136140 |
| 0x5E | 6000 | 82.8999 | 96.7857 | 5.655360 |
| 0x5F | 7000 | 84.7570 | 96.7857 | 5.785710 |
| 0x60 | 660 | 85.9559 | 102.562 | 3.433330 |
| 0x61 | 720 | 85.9559 | 102.413 | 3.580000 |
| 0x62 | 900 | 85.9559 | 102.413 | 4.300000 |
| 0x63 | 1200 | 85.7972 | 97.7779 | 5.020000 |
| 0x64 | 1500 | 78.9018 | 88.4954 | 5.000000 |
| 0x65 | 2000 | 67.2128 | 83.8477 | 4.620000 |
| 0x66 | 2500 | 69.7651 | 84.8000 | 5.300000 |
| 0x67 | 3000 | 80.6477 | 84.3303 | 5.582500 |
| 0x68 | 4000 | 91.1665 | 86.7162 | 5.233780 |
| 0x69 | 5000 | 92.8513 | 99.3651 | 5.770000 |
| 0x6A | 6000 | 95.8990 | 98.5651 | 6.250000 |
| 0x6B | 7000 | 100.712 | 98.5651 | 6.500000 |
| 0x6C | 660 | 90.4000 | 104.296 | 4.700000 |
| 0x6D | 720 | 90.4000 | 104.219 | 4.753330 |
| 0x6E | 900 | 90.4000 | 104.219 | 5.233330 |
| 0x6F | 1200 | 90.4000 | 100.109 | 5.660000 |
| 0x70 | 1500 | 81.6000 | 91.8209 | 6.050000 |
| 0x71 | 2000 | 69.2372 | 87.6417 | 6.000000 |
| 0x72 | 2500 | 70.4000 | 88.9533 | 5.950000 |
| 0x73 | 3000 | 81.7093 | 88.7696 | 6.282500 |
| 0x74 | 4000 | 96.4294 | 92.9135 | 6.311780 |
| 0x75 | 5000 | 99.4186 | 101.312 | 6.750000 |
| 0x76 | 6000 | 106.479 | 100.730 | 7.100000 |
| 0x77 | 7000 | 112.442 | 100.730 | 7.400000 |
| 0x78 | 660 | 90.4000 | 104.623 | 4.800000 |
| 0x79 | 720 | 90.4000 | 104.596 | 4.880000 |
| 0x7A | 900 | 90.4000 | 104.596 | 5.600000 |
| 0x7B | 1200 | 90.4000 | 100.298 | 6.160000 |
| 0x7C | 1500 | 81.6000 | 94.2748 | 7.770000 |
| 0x7D | 2000 | 69.9923 | 92.5497 | 8.000000 |
| 0x7E | 2500 | 70.4000 | 96.1265 | 7.870000 |
| 0x7F | 3000 | 81.8981 | 94.2439 | 7.945000 |
| 0x80 | 4000 | 97.4781 | 100.632 | 7.341110 |
| 0x81 | 5000 | 99.7961 | 103.577 | 8.000000 |
| 0x82 | 6000 | 112.142 | 103.373 | 8.500000 |
| 0x83 | 7000 | 117.350 | 103.373 | 8.900000 |
| 0x84 | 660 | 90.4000 | 104.800 | 4.899900 |
| 0x85 | 720 | 90.4000 | 104.800 | 5.006540 |
| 0x86 | 900 | 90.4000 | 104.800 | 5.966300 |
| 0x87 | 1200 | 90.4000 | 100.400 | 6.899260 |
| 0x88 | 1500 | 81.6000 | 95.6000 | 8.998770 |
| 0x89 | 2000 | 70.4000 | 95.2000 | 9.698300 |
| 0x8A | 2500 | 70.4000 | 100.000 | 9.698170 |
| 0x8B | 3000 | 82.0000 | 97.2000 | 9.698250 |
| 0x8C | 4000 | 98.0444 | 104.800 | 9.697640 |
| 0x8D | 5000 | 100.000 | 104.800 | 9.698300 |
| 0x8E | 6000 | 115.200 | 104.800 | 9.698800 |
| 0x8F | 7000 | 120.000 | 104.800 | 9.699200 |
| 0xFF | 0 | 0 | 0 | 0 |
_EISYGD_INPA
Dimensions: 145 rows × 5 columns
| NR | NKW_WERT | VSE_SPRI_WERT | VSA_SPRI_WERT | WDK_IST_WERT |
|---|---|---|---|---|
| 0x00 | 660 | 120.0 | 105.0 | 2.00 |
| 0x01 | 720 | 120.0 | 105.0 | 3.00 |
| 0x02 | 900 | 120.0 | 105.0 | 4.00 |
| 0x03 | 1200 | 120.0 | 104.0 | 5.00 |
| 0x04 | 1500 | 120.0 | 103.0 | 6.00 |
| 0x05 | 2000 | 119.0 | 100.0 | 7.00 |
| 0x06 | 2500 | 118.0 | 98.0 | 8.00 |
| 0x07 | 3000 | 116.0 | 98.0 | 9.00 |
| 0x08 | 4000 | 112.0 | 95.0 | 10.0 |
| 0x09 | 5000 | 107.0 | 91.0 | 11.0 |
| 0x0A | 6000 | 107.0 | 86.0 | 12.0 |
| 0x0B | 7000 | 107.0 | 84.0 | 13.0 |
| 0x0C | 660 | 118.0 | 103.0 | 5.0 |
| 0x0D | 720 | 118.0 | 103.0 | 6.0 |
| 0x0E | 900 | 118.0 | 101.0 | 7.0 |
| 0x0F | 1200 | 116.0 | 95.0 | 8.0 |
| 0x10 | 1500 | 113.0 | 91.0 | 9.0 |
| 0x11 | 2000 | 111.0 | 95.0 | 10.0 |
| 0x12 | 2500 | 109.0 | 92.0 | 11.0 |
| 0x13 | 3000 | 108.0 | 95.0 | 12.0 |
| 0x14 | 4000 | 102.0 | 97.0 | 13.0 |
| 0x15 | 5000 | 91.0 | 95.0 | 14.0 |
| 0x16 | 6000 | 99.0 | 94.0 | 15.0 |
| 0x17 | 7000 | 103.0 | 81.0 | 16.0 |
| 0x18 | 660 | 113.0 | 98.0 | 7.0 |
| 0x19 | 720 | 112.0 | 98.0 | 8.0 |
| 0x1A | 900 | 111.0 | 97.0 | 10.0 |
| 0x1B | 1200 | 109.0 | 92.0 | 11.0 |
| 0x1C | 1500 | 108.0 | 88.0 | 12.0 |
| 0x1D | 2000 | 105.0 | 95.0 | 13.0 |
| 0x1E | 2500 | 104.0 | 92.0 | 15.0 |
| 0x1F | 3000 | 98.0 | 98.0 | 17.0 |
| 0x20 | 4000 | 92.0 | 95.0 | 18.0 |
| 0x21 | 5000 | 91.0 | 96.0 | 19.0 |
| 0x22 | 6000 | 97.0 | 96.0 | 22.0 |
| 0x23 | 7000 | 101.0 | 95.0 | 24.0 |
| 0x24 | 660 | 109.0 | 98.0 | 9.0 |
| 0x25 | 720 | 108.0 | 98.0 | 10.0 |
| 0x26 | 900 | 107.0 | 97.0 | 12.0 |
| 0x27 | 1200 | 103.0 | 92.0 | 13.0 |
| 0x28 | 1500 | 101.0 | 88.0 | 15.0 |
| 0x29 | 2000 | 99.0 | 95.0 | 17.0 |
| 0x2A | 2500 | 97.0 | 92.0 | 18.0 |
| 0x2B | 3000 | 95.0 | 98.0 | 19.0 |
| 0x2C | 4000 | 94.0 | 95.0 | 22.0 |
| 0x2D | 5000 | 102.0 | 96.0 | 24.0 |
| 0x2E | 6000 | 108.0 | 96.0 | 25.0 |
| 0x2F | 7000 | 113.0 | 95.0 | 27.0 |
| 0x30 | 660 | 109.0 | 98.0 | 13.0 |
| 0x31 | 720 | 108.0 | 98.0 | 14.0 |
| 0x32 | 900 | 107.0 | 97.0 | 16.0 |
| 0x33 | 1200 | 103.0 | 92.0 | 17.0 |
| 0x34 | 1500 | 101.0 | 88.0 | 19.0 |
| 0x35 | 2000 | 99.0 | 95.0 | 21.0 |
| 0x36 | 2500 | 97.0 | 92.0 | 22.0 |
| 0x37 | 3000 | 95.0 | 98.0 | 23.0 |
| 0x38 | 4000 | 94.0 | 95.0 | 26.0 |
| 0x39 | 5000 | 102.0 | 96.0 | 28.0 |
| 0x3A | 6000 | 108.0 | 96.0 | 29.0 |
| 0x3B | 7000 | 113.0 | 95.0 | 30.0 |
| 0x3C | 660 | 109.0 | 98.0 | 15.0 |
| 0x3D | 720 | 108.0 | 98.0 | 16.0 |
| 0x3E | 900 | 107.0 | 97.0 | 18.0 |
| 0x3F | 1200 | 103.0 | 92.0 | 19.0 |
| 0x40 | 1500 | 101.0 | 88.0 | 20.0 |
| 0x41 | 2000 | 99.0 | 95.0 | 22.0 |
| 0x42 | 2500 | 97.0 | 92.0 | 24.0 |
| 0x43 | 3000 | 95.0 | 98.0 | 25.0 |
| 0x44 | 4000 | 94.0 | 95.0 | 28.0 |
| 0x45 | 5000 | 102.0 | 96.0 | 30.0 |
| 0x46 | 6000 | 108.0 | 96.0 | 31.0 |
| 0x47 | 7000 | 113.0 | 95.0 | 32.0 |
| 0x48 | 660 | 109.0 | 98.0 | 17.0 |
| 0x49 | 720 | 108.0 | 98.0 | 18.0 |
| 0x4A | 900 | 107.0 | 97.0 | 20.0 |
| 0x4B | 1200 | 103.0 | 92.0 | 21.0 |
| 0x4C | 1500 | 101.0 | 88.0 | 22.0 |
| 0x4D | 2000 | 99.0 | 95.0 | 24.0 |
| 0x4E | 2500 | 97.0 | 92.0 | 26.0 |
| 0x4F | 3000 | 95.0 | 98.0 | 27.0 |
| 0x50 | 4000 | 94.0 | 95.0 | 30.0 |
| 0x51 | 5000 | 102.0 | 96.0 | 32.0 |
| 0x52 | 6000 | 108.0 | 96.0 | 34.0 |
| 0x53 | 7000 | 113.0 | 95.0 | 36.0 |
| 0x54 | 660 | 109.0 | 98.0 | 20.0 |
| 0x55 | 720 | 108.0 | 98.0 | 21.0 |
| 0x56 | 900 | 107.0 | 97.0 | 23.0 |
| 0x57 | 1200 | 103.0 | 92.0 | 24.0 |
| 0x58 | 1500 | 101.0 | 88.0 | 25.0 |
| 0x59 | 2000 | 99.0 | 95.0 | 27.0 |
| 0x5A | 2500 | 97.0 | 92.0 | 29.0 |
| 0x5B | 3000 | 95.0 | 98.0 | 30.0 |
| 0x5C | 4000 | 94.0 | 95.0 | 33.0 |
| 0x5D | 5000 | 102.0 | 96.0 | 35.0 |
| 0x5E | 6000 | 108.0 | 96.0 | 37.0 |
| 0x5F | 7000 | 113.0 | 95.0 | 39.0 |
| 0x60 | 660 | 109.0 | 98.0 | 22.0 |
| 0x61 | 720 | 108.0 | 98.0 | 23.0 |
| 0x62 | 900 | 107.0 | 97.0 | 25.0 |
| 0x63 | 1200 | 103.0 | 92.0 | 26.0 |
| 0x64 | 1500 | 101.0 | 88.0 | 27.0 |
| 0x65 | 2000 | 99.0 | 95.0 | 29.0 |
| 0x66 | 2500 | 97.0 | 92.0 | 31.0 |
| 0x67 | 3000 | 95.0 | 98.0 | 32.0 |
| 0x68 | 4000 | 94.0 | 95.0 | 35.0 |
| 0x69 | 5000 | 102.0 | 96.0 | 37.0 |
| 0x6A | 6000 | 108.0 | 96.0 | 39.0 |
| 0x6B | 7000 | 113.0 | 95.0 | 41.0 |
| 0x6C | 660 | 109.0 | 98.0 | 25.0 |
| 0x6D | 720 | 108.0 | 98.0 | 26.0 |
| 0x6E | 900 | 107.0 | 97.0 | 27.0 |
| 0x6F | 1200 | 103.0 | 92.0 | 28.0 |
| 0x70 | 1500 | 101.0 | 88.0 | 29.0 |
| 0x71 | 2000 | 99.0 | 95.0 | 31.0 |
| 0x72 | 2500 | 97.0 | 92.0 | 33.0 |
| 0x73 | 3000 | 95.0 | 98.0 | 34.0 |
| 0x74 | 4000 | 94.0 | 95.0 | 37.0 |
| 0x75 | 5000 | 102.0 | 96.0 | 39.0 |
| 0x76 | 6000 | 108.0 | 96.0 | 41.0 |
| 0x77 | 7000 | 113.0 | 95.0 | 43.0 |
| 0x78 | 660 | 109.0 | 98.0 | 30.0 |
| 0x79 | 720 | 108.0 | 98.0 | 30.0 |
| 0x7A | 900 | 107.0 | 97.0 | 32.0 |
| 0x7B | 1200 | 103.0 | 92.0 | 33.0 |
| 0x7C | 1500 | 101.0 | 88.0 | 34.0 |
| 0x7D | 2000 | 99.0 | 95.0 | 35.0 |
| 0x7E | 2500 | 97.0 | 92.0 | 38.0 |
| 0x7F | 3000 | 95.0 | 98.0 | 39.0 |
| 0x80 | 4000 | 94.0 | 95.0 | 42.0 |
| 0x81 | 5000 | 102.0 | 96.0 | 45.0 |
| 0x82 | 6000 | 108.0 | 96.0 | 47.0 |
| 0x83 | 7000 | 113.0 | 95.0 | 50.0 |
| 0x84 | 660 | 99.9 | 101.0 | 100.0 |
| 0x85 | 720 | 108.0 | 98.0 | 100.0 |
| 0x86 | 900 | 107.0 | 97.0 | 100.0 |
| 0x87 | 1200 | 103.0 | 92.0 | 100.0 |
| 0x88 | 1500 | 101.0 | 88.0 | 100.0 |
| 0x89 | 2000 | 99.0 | 95.0 | 100.0 |
| 0x8A | 2500 | 97.0 | 92.0 | 100.0 |
| 0x8B | 3000 | 95.0 | 98.0 | 100.0 |
| 0x8C | 4000 | 94.0 | 95.0 | 100.0 |
| 0x8D | 5000 | 102.0 | 96.0 | 100.0 |
| 0x8E | 6000 | 108.0 | 96.0 | 100.0 |
| 0x8F | 7000 | 113.0 | 95.0 | 100.0 |
| 0xFF | 0 | 0 | 0 | 0 |
_KRANN_INPA
Dimensions: 145 rows × 4 columns
| NR | NKW_WERT | RF_WERT | TANS_WERT |
|---|---|---|---|
| 0x00 | 660 | 15 | 30 |
| 0x01 | 720 | 15 | 30 |
| 0x02 | 900 | 15 | 30 |
| 0x03 | 1200 | 15 | 30 |
| 0x04 | 1500 | 15 | 30 |
| 0x05 | 2000 | 15 | 30 |
| 0x06 | 2500 | 15 | 30 |
| 0x07 | 3000 | 15 | 30 |
| 0x08 | 4000 | 15 | 30 |
| 0x09 | 5000 | 15 | 30 |
| 0x0A | 6000 | 15 | 30 |
| 0x0B | 7000 | 15 | 30 |
| 0x0C | 660 | 20 | 30 |
| 0x0D | 720 | 20 | 30 |
| 0x0E | 900 | 20 | 30 |
| 0x0F | 1200 | 20 | 30 |
| 0x10 | 1500 | 20 | 30 |
| 0x11 | 2000 | 20 | 30 |
| 0x12 | 2500 | 20 | 30 |
| 0x13 | 3000 | 20 | 30 |
| 0x14 | 4000 | 20 | 30 |
| 0x15 | 5000 | 20 | 30 |
| 0x16 | 6000 | 20 | 30 |
| 0x17 | 7000 | 20 | 30 |
| 0x18 | 660 | 25 | 30 |
| 0x19 | 720 | 25 | 30 |
| 0x1A | 900 | 25 | 30 |
| 0x1B | 1200 | 25 | 30 |
| 0x1C | 1500 | 25 | 30 |
| 0x1D | 2000 | 25 | 30 |
| 0x1E | 2500 | 25 | 30 |
| 0x1F | 3000 | 25 | 30 |
| 0x20 | 4000 | 25 | 30 |
| 0x21 | 5000 | 25 | 30 |
| 0x22 | 6000 | 25 | 30 |
| 0x23 | 7000 | 25 | 30 |
| 0x24 | 660 | 30 | 30 |
| 0x25 | 720 | 30 | 30 |
| 0x26 | 900 | 30 | 30 |
| 0x27 | 1200 | 30 | 30 |
| 0x28 | 1500 | 30 | 30 |
| 0x29 | 2000 | 30 | 30 |
| 0x2A | 2500 | 30 | 30 |
| 0x2B | 3000 | 30 | 30 |
| 0x2C | 4000 | 30 | 30 |
| 0x2D | 5000 | 30 | 30 |
| 0x2E | 6000 | 30 | 30 |
| 0x2F | 7000 | 30 | 30 |
| 0x30 | 660 | 35 | 30 |
| 0x31 | 720 | 35 | 30 |
| 0x32 | 900 | 35 | 30 |
| 0x33 | 1200 | 35 | 30 |
| 0x34 | 1500 | 35 | 30 |
| 0x35 | 2000 | 35 | 30 |
| 0x36 | 2500 | 35 | 30 |
| 0x37 | 3000 | 35 | 30 |
| 0x38 | 4000 | 35 | 30 |
| 0x39 | 5000 | 35 | 30 |
| 0x3A | 6000 | 35 | 30 |
| 0x3B | 7000 | 35 | 30 |
| 0x3C | 660 | 40 | 30 |
| 0x3D | 720 | 40 | 30 |
| 0x3E | 900 | 40 | 30 |
| 0x3F | 1200 | 40 | 30 |
| 0x40 | 1500 | 40 | 30 |
| 0x41 | 2000 | 40 | 30 |
| 0x42 | 2500 | 40 | 30 |
| 0x43 | 3000 | 40 | 30 |
| 0x44 | 4000 | 40 | 30 |
| 0x45 | 5000 | 40 | 30 |
| 0x46 | 6000 | 40 | 30 |
| 0x47 | 7000 | 40 | 30 |
| 0x48 | 660 | 50 | 30 |
| 0x49 | 720 | 50 | 30 |
| 0x4A | 900 | 50 | 30 |
| 0x4B | 1200 | 50 | 30 |
| 0x4C | 1500 | 50 | 30 |
| 0x4D | 2000 | 50 | 30 |
| 0x4E | 2500 | 50 | 30 |
| 0x4F | 3000 | 50 | 30 |
| 0x50 | 4000 | 50 | 30 |
| 0x51 | 5000 | 50 | 30 |
| 0x52 | 6000 | 50 | 30 |
| 0x53 | 7000 | 50 | 30 |
| 0x54 | 660 | 60 | 30 |
| 0x55 | 720 | 60 | 30 |
| 0x56 | 900 | 60 | 30 |
| 0x57 | 1200 | 60 | 30 |
| 0x58 | 1500 | 60 | 30 |
| 0x59 | 2000 | 60 | 30 |
| 0x5A | 2500 | 60 | 30 |
| 0x5B | 3000 | 60 | 30 |
| 0x5C | 4000 | 60 | 30 |
| 0x5D | 5000 | 60 | 30 |
| 0x5E | 6000 | 60 | 30 |
| 0x5F | 7000 | 60 | 30 |
| 0x60 | 660 | 70 | 30 |
| 0x61 | 720 | 70 | 30 |
| 0x62 | 900 | 70 | 30 |
| 0x63 | 1200 | 70 | 30 |
| 0x64 | 1500 | 70 | 30 |
| 0x65 | 2000 | 70 | 30 |
| 0x66 | 2500 | 70 | 30 |
| 0x67 | 3000 | 70 | 30 |
| 0x68 | 4000 | 70 | 30 |
| 0x69 | 5000 | 70 | 30 |
| 0x6A | 6000 | 70 | 30 |
| 0x6B | 7000 | 70 | 30 |
| 0x6C | 660 | 80 | 30 |
| 0x6D | 720 | 80 | 30 |
| 0x6E | 900 | 80 | 30 |
| 0x6F | 1200 | 80 | 30 |
| 0x70 | 1500 | 80 | 30 |
| 0x71 | 2000 | 80 | 30 |
| 0x72 | 2500 | 80 | 30 |
| 0x73 | 3000 | 80 | 30 |
| 0x74 | 4000 | 80 | 30 |
| 0x75 | 5000 | 80 | 30 |
| 0x76 | 6000 | 80 | 30 |
| 0x77 | 7000 | 80 | 30 |
| 0x78 | 660 | 120 | 30 |
| 0x79 | 720 | 120 | 30 |
| 0x7A | 900 | 120 | 30 |
| 0x7B | 1200 | 120 | 30 |
| 0x7C | 1500 | 120 | 30 |
| 0x7D | 2000 | 120 | 30 |
| 0x7E | 2500 | 120 | 30 |
| 0x7F | 3000 | 120 | 30 |
| 0x80 | 4000 | 120 | 30 |
| 0x81 | 5000 | 120 | 30 |
| 0x82 | 6000 | 120 | 30 |
| 0x83 | 7000 | 120 | 30 |
| 0x84 | 660 | 150 | 30 |
| 0x85 | 720 | 150 | 30 |
| 0x86 | 900 | 150 | 30 |
| 0x87 | 1200 | 150 | 30 |
| 0x88 | 1500 | 150 | 30 |
| 0x89 | 2000 | 150 | 30 |
| 0x8A | 2500 | 150 | 30 |
| 0x8B | 3000 | 150 | 30 |
| 0x8C | 4000 | 150 | 30 |
| 0x8D | 5000 | 150 | 30 |
| 0x8E | 6000 | 150 | 30 |
| 0x8F | 7000 | 150 | 30 |
| 0xFF | 0 | 0 | 0 |
_TECU_FASTA
Dimensions: 49 rows × 3 columns
| NR | SPEICHERADRESSE | ANZAHL |
|---|---|---|
| 0x00 | 0x7faed8 | 4 |
| 0x01 | 0x7faedc | 4 |
| 0x02 | 0x7faee0 | 4 |
| 0x03 | 0x7faee4 | 4 |
| 0x04 | 0x7faee8 | 4 |
| 0x05 | 0x7faeec | 4 |
| 0x06 | 0x7faef0 | 4 |
| 0x07 | 0x7faef4 | 4 |
| 0x10 | 0x7fac14 | 4 |
| 0x11 | 0x7fac18 | 4 |
| 0x12 | 0x7fac1c | 4 |
| 0x13 | 0x7fac20 | 4 |
| 0x14 | 0x7fac24 | 4 |
| 0x15 | 0x7fac28 | 4 |
| 0x16 | 0x7fac2c | 4 |
| 0x17 | 0x7fac30 | 4 |
| 0x20 | 0x7fac14 | 4 |
| 0x21 | 0x7fac18 | 4 |
| 0x22 | 0x7fac1c | 4 |
| 0x23 | 0x7fac20 | 4 |
| 0x24 | 0x7fac24 | 4 |
| 0x25 | 0x7fac28 | 4 |
| 0x26 | 0x7fac2c | 4 |
| 0x27 | 0x7fac30 | 4 |
| 0x30 | 0x7fabe4 | 4 |
| 0x31 | 0x7fabe8 | 4 |
| 0x32 | 0x7fabec | 4 |
| 0x33 | 0x7fabf0 | 4 |
| 0x34 | 0x7fabf4 | 4 |
| 0x35 | 0x7fabf8 | 4 |
| 0x36 | 0x7fabfc | 4 |
| 0x37 | 0x7fac00 | 4 |
| 0x40 | 0x7fabe4 | 4 |
| 0x41 | 0x7fabe8 | 4 |
| 0x42 | 0x7fabec | 4 |
| 0x43 | 0x7fabf0 | 4 |
| 0x44 | 0x7fabf4 | 4 |
| 0x45 | 0x7fabf8 | 4 |
| 0x46 | 0x7fabfc | 4 |
| 0x47 | 0x7fac00 | 4 |
| 0x50 | 0x7fabfc | 4 |
| 0x51 | 0x7fac00 | 4 |
| 0x52 | 0x7fac04 | 4 |
| 0x53 | 0x7fac08 | 4 |
| 0x54 | 0x7fac0c | 4 |
| 0x55 | 0x7fac10 | 4 |
| 0x56 | 0x7fac14 | 4 |
| 0x57 | 0x7fac18 | 4 |
| 0xFF | 0 | 0 |
DIAGMODE
Dimensions: 14 rows × 3 columns
| NR | MODE | MODE_TEXT |
|---|---|---|
| 0x81 | DEFAULT | DefaultMode |
| 0x82 | PT | PeriodicTransmissions |
| 0x84 | EOLSSM | EndOfLineSystemSupplierMode |
| 0x85 | ECUPM | ECUProgrammingMode |
| 0x86 | ECUDM | ECUDevelopmentMode |
| 0x87 | ECUAM | ECUAdjustmentMode |
| 0x88 | ECUVCM | ECUVariantCodingMode |
| 0x89 | ECUSM | ECUSafetyMode |
| 0xFA | SSS_A | SystemSupplierSpecific (A) |
| 0xFB | SSS_B | SystemSupplierSpecific (B) |
| 0xFC | SSS_C | SystemSupplierSpecific (C) |
| 0xFD | SSS_D | SystemSupplierSpecific (D) |
| 0xFE | SSS_E | SystemSupplierSpecific (E) |
| 0xXY | -- | unbekannter Diagnose-Mode |
BAUDRATE
Dimensions: 7 rows × 3 columns
| NR | BAUD | BAUD_TEXT |
|---|---|---|
| 0x01 | PC9600 | Baudrate 9.6 kBaud |
| 0x02 | PC19200 | Baudrate 19.2 kBaud |
| 0x03 | PC38400 | Baudrate 38.4 kBaud |
| 0x04 | PC57600 | Baudrate 57.6 kBaud |
| 0x05 | PC115200 | Baudrate 115.2 kBaud |
| 0x06 | SB | Specific Baudrate |
| 0xXY | -- | unbekannte Baudrate |
PROGRAMMIERSTATUS
Dimensions: 19 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0x00 | Anlieferzustand |
| 0x01 | Normalbetrieb |
| 0x02 | nicht benutzt |
| 0x03 | Speicher gelöscht |
| 0x04 | nicht benutzt |
| 0x05 | Signaturprüfung PAF nicht durchgeführt |
| 0x06 | Signaturprüfung DAF nicht durchgeführt |
| 0x07 | Programmprogrammiersitzung aktiv |
| 0x08 | Datenprogrammiersitzung aktiv |
| 0x09 | Hardwarereferenzeintrag fehlerhaft |
| 0x0A | Programmreferenzeintrag fehlerhaft |
| 0x0B | Referenzierungsfehler Hardware -> Programm |
| 0x0C | Programm nicht vorhanden oder nicht vollständig |
| 0x0D | Datenreferenzeintrag fehlerhaft |
| 0x0E | Referenzierungsfehler Programm -> Daten |
| 0x0F | Daten nicht vorhanden oder nicht vollständig |
| 0x10 | Reserviert fuer BMW |
| 0x80 | Reserviert fuer Zulieferer |
| 0xXY | unbekannter Programmierstatus |
FUNKTIONALEADRESSE
Dimensions: 11 rows × 3 columns
| NR | F_ADR | F_ADR_TEXT |
|---|---|---|
| 0xE6 | VD-FLEXRAY | Vertikaldynamik Flexray Steuergeräte |
| 0xE7 | SWT | Sweeping technologies Steuergeräte |
| 0xE8 | LIN | LIN-Bus Master Steuergeräte |
| 0xE9 | K-CAN | Karosserie-CAN Steuergeräte |
| 0xEA | PT-CAN | Powertrain-CAN Steuergeräte |
| 0xEB | SI | Sicherheits-BUS Steuergeräte |
| 0xEC | MOST | MOST-BUS Steuergeräte |
| 0xED | BOS | Bedarfsorientierter Service |
| 0xED | CBS | Bedarfsorientierter Service |
| 0xEE | PERSONAL | Personalisierung |
| 0xEF | ALL | alle Steuergeräte |
MESSWERTEMODE
Dimensions: 14 rows × 3 columns
| TEXT | WERT | KOMMENTAR |
|---|---|---|
| ein | 1 | Argument ARG. Messwertblock im SG löschen, neu schreiben und lesen |
| aus | 0 | Argument ARG. Messwertblock nur lesen |
| ja | 1 | Argument ARG. Messwertblock im SG löschen, neu schreiben und lesen |
| nein | 0 | Argument ARG. Messwertblock nur lesen |
| yes | 1 | Argument ARG. Messwertblock im SG löschen, neu schreiben und lesen |
| no | 0 | Argument ARG. Messwertblock nur lesen |
| on | 1 | Argument ARG. Messwertblock im SG löschen, neu schreiben und lesen |
| off | 0 | Argument ARG. Messwertblock nur lesen |
| 1 | 1 | Argument ARG. Messwertblock im SG löschen, neu schreiben und lesen |
| 0 | 0 | Argument ARG. Messwertblock nur lesen |
| 3 | 3 | Argument ID. Messwertblock im SG löschen, neu schreiben und lesen |
| 2 | 2 | Argument ID. Messwertblock nur lesen |
| 5 | 5 | Argument LABEL. Messwertblock im SG löschen, neu schreiben und lesen |
| 4 | 4 | Argument LABEL. Messwertblock nur lesen |
GROBNAME
Dimensions: 48 rows × 2 columns
| ADR | GROBNAME |
|---|---|
| 0x00 | JBBF |
| 0x01 | MRS |
| 0x12 | DME/DDE |
| 0x13 | DME/DDE |
| 0x16 | AFS |
| 0x17 | EKP |
| 0x18 | EGS |
| 0x19 | VGSG |
| 0x1C | LDM |
| 0x1D | FFP |
| 0x20 | RDC |
| 0x21 | ACC |
| 0x24 | CVM |
| 0x27 | PGS |
| 0x29 | DSC |
| 0x30 | EPS |
| 0x35 | SVS |
| 0x36 | TEL |
| 0x37 | AMP |
| 0x38 | EHC |
| 0x3B | NAV |
| 0x3C | CDC |
| 0x3F | ASK |
| 0x40 | CAS |
| 0x41 | DWA |
| 0x44 | SHD/MDS |
| 0x47 | ANTTU |
| 0x4B | VIDEO |
| 0x50 | SINE |
| 0x54 | RADIO |
| 0x56 | FZD |
| 0x60 | KOMBI |
| 0x61 | FBI |
| 0x62 | MOSTGW |
| 0x63 | MASK/CCC |
| 0x64 | PDC |
| 0x67 | ZBE |
| 0x6D | FAS |
| 0x6E | BFS |
| 0x71 | AHM |
| 0x72 | FRM |
| 0x73 | CID |
| 0x78 | KLIMA |
| 0xA0 | CCC |
| 0x90 | VIRTSG90 |
| 0x91 | VIRTSG91 |
| 0x92 | VIRTSG92 |
| 0xXY | ???? |