TELIBUS2.prg
INFO
| Field | Value |
|---|---|
| ECU | Everest TCU für I-Bus Fahrzeuge |
| ORIGIN | BMW AG / TELEMOTIVE AG EI-43 Wilbert Snijders |
| REVISION | 1.730 |
| AUTHOR | BMW AG / TELEMOTIVE AG EI-43 Wilbert Snijders |
| COMMENT | N/A |
| PACKAGE | 1.02 |
| SPRACHE | deutsch |
Jobs
Index
- INFO - Information SGBD
- IDENT - Identdaten
- FS_LESEN - Fehlerspeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
- FS_LOESCHEN - Fehlerspeicher loeschen
- PRUEFSTEMPEL_LESEN - Auslesen des Pruefstempels
- PRUEFSTEMPEL_SCHREIBEN - Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden.
- IS_LESEN - Infospeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
- STEUERGERAETE_RESET - Steuergeraete Reset ausloesen
- ENERGIESPARMODE - Einstellen des Energiesparmodes
- SLEEP_MODE - SG in Sleep-Mode versetzen
- DIAGNOSE_AUFRECHT - Diagnosemode aufrechterhalten
- DIAGNOSE_ENDE - Diagnose beenden
- C_CI_LESEN - Codierindex lesen Standard Codierjob
- C_FG_LESEN - Fahrgestellnummer lesen Standard Codierjob
- C_FG_SCHREIBEN - Fahrgestellnummer schreiben Standard Codierjob
- C_FG_AUFTRAG - Fahrgestellnummer schreiben und ruecklesen Standard Codierjob
- INITIALISIERUNG - Initialisierung und Kommunikationsparameter DS2
- IDENT_SCHREIBEN - Identdaten schreiben
- TCU_TYPE_LESEN - Lesen der 1-byte TCU ID
- C_C_LESEN - Codierdaten lesen
- C_C_AUFTRAG - Codierdaten schreiben und verifizieren
- HW_SELBSTTEST_START - Durchfuehrung des spez. Selbsttests
- HW_SELBSTTEST_STATUS - Read results of the HW selftest
- IO_PORTS_SCHREIBEN_UND_TESTEN - Set/test verschiedener I/O Ports
- STATUS_IO_LESEN - Status von IO-Ports lesen
- STATUS_SIM_READER_LESEN - Read status of TCU built-in and attached SIM card readers
- STATUS_GPS - Status des GPS wird ausgegeben KWP2000: $21 ReadDataByLocalIdentifier $02 recordLocalIdentifier Modus : Default
- FAHRGESTELLNUMMER_VIN_LESEN - Lesen der 7-byte Fahrgestellnummer aus den Codierdaten
- ECALL_BCALL_BUTTON_TEST - Test Ecall, Bcall buttons
- ECALL_COMPONENT_TEST - Test Microphone and GSM Antenna
- BT_PAIRING_START - Initiate Bluetooth Pairing
- BT_PAIRING_RESULT_LESEN - Lesen von Bluetooth Pairing Ergebnis
- BT_FIX_PASSKEY_SCHREIBEN - Write Bluetooth fix passkey
- BT_FIX_PASSKEY_LESEN - Read Bluetooth fix passkey
- BT_DEVICE_ADDRESS_LESEN - Read Bluetooth address
- BT_USER_FRIENDLY_NAME_SCHREIBEN - Set Bluetooth user-friendly name
- BT_USER_FRIENDLY_NAME_LESEN - Read Bluetooth user-friendly name
- FG_ALS_BT_USER_FRIENDLY_NAME_SCHREIBEN - Write "BMW" + last 5 digits of FG as BT User-Friendly name Based on standard Codierjob C_FG_SCHREIBEN
- BT_PAIRED_DEVICES_LESEN - Read Bluetooth paired devices
- BT_PAIRED_DEVICES_LIST_LESEN - Lesen von Liste mit Bluetooth Paired Devices
- BT_PAIRED_DEVICES_LOESCHEN - Delete list with Bluetooth paired devices
- BT_PAIRABLE_MODE - Bring Bluetooth Server into pairable (and discoverable) mode
- BT_ENABLE - Enable Bluetooth operation
- BT_DISABLE - Disable Bluetooth operation
- BT_OPERATIONMODE_LESEN - read if BT operation is enabled or disabled
- BT_HFP_ENABLE - Enable Bluetooth portable support
- BT_HFP_LESEN - Read status of Bluetooth portable HFP support
- BT_HFP_DISABLE - Disable Bluetooth portable HFP support
- ECALL_ENABLE - Enable ecall
- ECALL_DISABLE - Disable E-call
- ECALL_STATUS_LESEN - read if E-call is enabled or disabled
- NAD_EQUIPPED_ENABLE - Enable NAD equipped coding parameter
- NAD_EQUIPPED_DISABLE - Disable NAD equipped coding parameter
- NAD_EQUIPPED_LESEN - Read status of the NAD equipped coding parameter
- DSP_ACOUSTIC_PROFILE_LESEN - GAL: read DSP acoustic profile (1-16)
- GAL_KMH_PER_STAGE_SCHREIBEN - GAL: set km/h per amplification stage (10 - 60)
- GAL_KMH_PER_STAGE_LESEN - GAL: read km/h per amplification stage (10 - 60)
- TELEMATICS_STATUS_LESEN - read if telematics operation is enabled or disabled
- NON_TELEMATICS_E_CALL_STATUS_LESEN - read if non-telematic E-call (call 911/112) is enabled or disabled
- ICC_ID_LESEN - Read ICC ID
- IMEI_LESEN - Read IMEI
- US_ESN_MIN_LESEN - Read MIN in Ericsson CM-42 NAD for US telematics
- US_CUST_CALLS_ENABLE - Enable customer calls over NAD with GMIN
- US_CUST_CALLS_DISABLE - Disable customer calls over NAD with GMIN
- US_CUST_CALLS_LESEN - Read if customer calls over NAD using telematic GMIN are enabled or disabled
- BACKUP_EMERGENCY_NO_SCHREIBEN - Set emergency number (e.g. 112/911) for non-telematic E-calls
- BACKUP_EMERGENCY_NO_LESEN - Read backup emergency number used for non-telematic E-calls (e.g.112/911)
- US_CALL_SERVICE_CENTER_NUMBER_SCHREIBEN - Set phone number of call service number (Verizon)
- US_CALL_SERVICE_CENTER_NUMBER_LESEN - Read phone number of call service center (Verizon)
- US_CALL_SERVICE_CENTER_STATUS_LESEN - read if call service center (e.g. Verizon)is enabled or disabled
- US_MIN_SCHREIBEN - Set MIN in Ericsson CM-42 NAD for US telenatics
- FG_SCHREIBEN_AS_US_MIN - Write last 5 digits of FG in GMIN Based on standard Codierjob C_FG_SCHREIBEN
- US_CDMA_DIRECTORY_SCHREIBEN - Set US CM-42 CDMA Directory 00000 00000 - 99999 99999
- US_CDMA_DIRECTORY_LESEN - CDMA Directory 00000 00000 00000 - 99999 99999 99999 -> 0x31..0x31 - 0x39..0x39
- US_SID_NID_SCHREIBEN - Set US CM-42 System ID and Network ID
- US_SID_NID_LESEN - Read US CM-42 Home SID/NID list
- US_CDMA_PRIMARY_CH_A_SCHREIBEN - Set US CM-42 CDMA Primary Channel A
- US_CDMA_PRIMARY_CH_A_LESEN - Read US CM-42 CDMA Primary Channel (1-311, 689-694, 1013-1023 as ASCII bytes)
- US_CDMA_SECONDARY_CH_A_SCHREIBEN - Set US CM-42 CDMA Secondary Channel A
- US_CDMA_SECONDARY_CH_A_LESEN - Read US CM-42 CDMA Secondary Channel A (1-311, 689-694, 1013-1023 as ASCII bytes)
- US_CDMA_PRIMARY_CH_B_SCHREIBEN - Set US CM-42 CDMA Primary Channel B
- US_CDMA_PRIMARY_CH_B_LESEN - Read US CM-42 CDMA Primary Channel B (365-644, 739-777 as ASCII bytes)
- US_CDMA_SECONDARY_CH_B_SCHREIBEN - Set US CM-42 CDMA Secondary Channel B
- US_CDMA_SECONDARY_CH_B_LESEN - Read US CM-42 CDMA Secondary Channel B (365-644, 739-777 as ASCII bytes)
- US_HOME_ONLY_ENABLE - Enable Home Only
- US_HOME_ONLY_DISABLE - Disable Home Only
- US_HOME_ONLY_LESEN - read status of home only
- US_A_B_SIDE_SCHREIBEN - Set Home Only Status (0-3)
- VOICE_RECOGNITION_LANGUAGE_WRITE - Set the voice recognition language (CI >= 5)
- VOICE_RECOGNITION_STATUS - Read voice recognition status (CI >= 5)
- PSIM_LESEN - Read status of Prefit SIM
- PSIM_ENABLE - Enable Prefit SIM
- PSIM_DISABLE - Disable Prefit SIM
- BT_ANTENNA_TEST - bt_antenna_test
- US_NAM_SELECT - Switch between CM42 NAM1 and NAM2 (Number Assignment Module) Note: New NAM becomes active after ending Diagnostic Mode
- US_NAM_STATUS - Read active CM42 NAM (Number Assignment Module)
- US_AMPS_PAGING_CH_LESEN - Read US CM-42 AMPS Initial Paging Channel 1 - 799, 990 - 1023 in ASCII
- US_AMPS_PAGING_CH_SCHREIBEN - Set US CM-42 AMPS Initial Paging Channel
- US_AMPS_SID_LESEN - Read US CM-42 AMPS Home System ID 0 - 16387
- US_AMPS_SID_SCHREIBEN - Set US CM-42 AMPS Home System ID 0 - 16387
- NAD_INFORMATION - Read information about the current NAD Status DS2: Telegram 3F 04 C8 40 22 cs
INFO
Information SGBD
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ECU | string | Steuergerät im Klartext |
| ORIGIN | string | Steuergeräte-Verantwortlicher |
| REVISION | string | Versions-Nummer |
| AUTHOR | string | Namen aller Autoren |
| COMMENT | string | wichtige Hinweise |
| PACKAGE | string | Include-Paket-Nummer |
| SPRACHE | string | deutsch, english |
IDENT
Identdaten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| ID_BMW_NR | string | BMW-Teilenummer |
| ID_HW_NR | int | BMW-Hardwarenummer |
| ID_COD_INDEX | int | Codier-Index |
| ID_DIAG_INDEX | int | Diagnose-Index |
| ID_BUS_INDEX | int | Bus-Index |
| ID_DATUM_KW | int | Herstelldatum KW |
| ID_DATUM_JAHR | int | Herstelldatum Jahr |
| ID_LIEF_NR | int | Lieferanten-Nummer |
| ID_LIEF_TEXT | string | Lieferanten-Nummer |
| ID_SW_NR | int | Softwarenummer |
| TELEGRAMM | binary | Antworttelegramm |
FS_LESEN
Fehlerspeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| F_ORT_NR | int | Index fuer Fehlerort |
| F_ORT_TEXT | string | Text zu Fehlerort table FOrtTexte ORTTEXT |
| F_HFK | int | Fehlerhaeufigkeit |
| F_ART_ANZ | int | Anzahl der Fehlerarten immer 1 |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen immer 0 |
| F_ART1_NR | int | |
| F_ART1_TEXT | string | table FArtTexte ARTTEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
FS_LOESCHEN
Fehlerspeicher loeschen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
PRUEFSTEMPEL_LESEN
Auslesen des Pruefstempels
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| BYTE1 | int | 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | 0-255 bzw. 0x00-0xFF |
| FG_ZIFFERN | string | die letzten vier Stellen der Fahrgestellnummer |
| TELEGRAMM | binary | Antworttelegramm |
PRUEFSTEMPEL_SCHREIBEN
Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden.
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | 0-255 bzw. 0x00-0xFF |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei ERROR_ARGUMENT, wenn Argumente nicht uebergeben oder ausser Bereich |
IS_LESEN
Infospeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| F_ORT_NR | int | Index fuer Fehlerort |
| F_ORT_TEXT | string | Text zu Fehlerort table IOrtTexte ORTTEXT |
| F_HFK | int | Fehlerhaeufigkeit |
| F_ART_ANZ | int | Anzahl der Fehlerarten immer 1 |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen immer 0 |
| F_ART1_NR | int | |
| F_ART1_TEXT | string | table IArtTexte ARTTEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
STEUERGERAETE_RESET
Steuergeraete Reset ausloesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ENERGIESPARMODE
Einstellen des Energiesparmodes
Arguments
| Name | Type | Comment |
|---|---|---|
| PRODUKTIONSMODE | string | "ein" -> Produktions Mode ein "aus" -> Produktions Mode aus table DigitalArgument TEXT Default: "aus" |
| TRANSPORTMODE | string | "ein" -> Transport Mode ein "aus" -> Transport Mode aus table DigitalArgument TEXT Default: "aus" |
| WERKSTATTMODE | string | "ein" -> Werkstatt Mode ein "aus" -> Werkstatt Mode aus table DigitalArgument TEXT Default: "aus" |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SLEEP_MODE
SG in Sleep-Mode versetzen
Arguments
| Name | Type | Comment |
|---|---|---|
| ZEIT | real | a) Zeit nach der das Steuergerät einschläft Bereich : 0.5 bis 20.0 [Sekunden] Auflösung : 0.5 [Sekunden] => zeitgesteuerter Power-Down (0x9B) wird aktiviert b) Default: (Es wird kein Argument übergeben!) => normaler Power-Down (0x9D) wird aktiviert |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag von SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
DIAGNOSE_AUFRECHT
Diagnosemode aufrechterhalten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
DIAGNOSE_ENDE
Diagnose beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
C_CI_LESEN
Codierindex lesen Standard Codierjob
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| ID_COD_INDEX | int | Codier-Index |
| _TELEGRAMM | binary | Antworttelegramm |
C_FG_LESEN
Fahrgestellnummer lesen Standard Codierjob
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FG_NR | string | die letzten vier Stellen der Fahrgestellnummer |
| _TELEGRAMM | binary | Antworttelegramm |
C_FG_SCHREIBEN
Fahrgestellnummer schreiben Standard Codierjob
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
C_FG_AUFTRAG
Fahrgestellnummer schreiben und ruecklesen Standard Codierjob
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
INITIALISIERUNG
Initialisierung und Kommunikationsparameter DS2
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| DONE | int | 1, wenn Okay |
IDENT_SCHREIBEN
Identdaten schreiben
Arguments
| Name | Type | Comment |
|---|---|---|
| ID_BMW_NR | string | BMW-Teilenummer e.g. 06924544 |
| ID_HW_NR | string | BMW-Hardwarenummer 00-99 |
| ID_COD_INDEX | string | Codier-Index von CBD 00-99 e.g. 01 |
| ID_DIAG_INDEX | string | Diagnose-Index - always 20 |
| ID_BUS_INDEX | string | Bus-Index 00 - 99, 01 |
| ID_DATUM_KW | string | Herstelldatum KW 01 - 52 |
| ID_DATUM_JAHR | string | Herstelldatum Jahr 00 - 99 |
| ID_LIEF_NR | string | Lieferanten-Nummer Motorola 23 |
| ID_SW_NR | string | Softwarenummer 00 - 99 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
TCU_TYPE_LESEN
Lesen der 1-byte TCU ID
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| TCU_ID | int | 1-byte TCU ID, 0x05 - I-bus ECE BTHS, 0x06 - I-bus US, 0x08 - I-bus ECE HFP |
| TCU_TYPE | int | OKAY, wenn fehlerfrei |
| TCU_TYPE_TEXT | string | Text, welche Variante verbaut ist |
| JOB_STATUS | string | OKAY, ERROR_.. |
C_C_LESEN
Codierdaten lesen
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Codierdaten |
Results
| Name | Type | Comment |
|---|---|---|
| CODIER_DATEN | binary | Codierdaten |
| JOB_STATUS | string | OKAY, ERROR_.. |
C_C_AUFTRAG
Codierdaten schreiben und verifizieren
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Codierdaten |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
HW_SELBSTTEST_START
Durchfuehrung des spez. Selbsttests
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
HW_SELBSTTEST_STATUS
Read results of the HW selftest
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| HW_SELFTEST_RESULT_BYTE | int | 2 bytes result bytes |
IO_PORTS_SCHREIBEN_UND_TESTEN
Set/test verschiedener I/O Ports
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | 1.byte with portdata |
| BYTE2 | int | 2.byte with portdata |
| BYTE3 | int | 3.byte with portdata |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| STAT_SOS_LED_EIN | int | 1=active, 0=not active |
| STAT_MUTE_EIN | int | 1=active, 0=not active |
STATUS_IO_LESEN
Status von IO-Ports lesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| STAT_E_CALL_EIN | int | e-call line from button 1=open, 0=closed(button pressed) |
| STAT_B_CALL_EIN | int | b-call line from button 1=open, 0=closed(button pressed) |
| STAT_BLUETOOTH_EIN | int | status of bluetooth 1=enable, 0=disable |
STATUS_SIM_READER_LESEN
Read status of TCU built-in and attached SIM card readers
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| STAT_TELEM_READER | int | 1 = telematic SIM card reader accessible |
| STAT_EXT_READER | int | 1 = external SIM card reader accessible |
STATUS_GPS
Status des GPS wird ausgegeben KWP2000: $21 ReadDataByLocalIdentifier $02 recordLocalIdentifier Modus : Default
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| STAT_GPS | int | GPS-Status 0x00 = Not supported: No GPS 0x01 = Not supported: Communication error 0x02 = Receiver error 0x03 = No almanac 0x04 = Searching satellites 0x05 = Tracking 1 satellite 0x06 = Tracking 2 satellites 0x07 = Tracking 3 satellites 0x08 = Tracking 4 satellites 0x09 = Tracking 5 satellites 0x0A = Tracking 6 satellites 0x0B = 2D positioning 0x0C = 3D positioning |
| STAT_GPS_TEXT | string | GPS-Status als Textausgabe |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FAHRGESTELLNUMMER_VIN_LESEN
Lesen der 7-byte Fahrgestellnummer aus den Codierdaten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| VIN | binary | 7 byte Vehicle Identification Number in I-bus TCU |
| VIN_TEXT | string | 7 byte Vehicle Identification Number in I-bus TCU |
| JOB_STATUS | string | OKAY, ERROR_.. |
ECALL_BCALL_BUTTON_TEST
Test Ecall, Bcall buttons
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| TEST_STATUS | int | 1-byte 0x00 fail (DTCS logged) 0x01 pass (No DTCS logged) |
| RESULT | string | status |
ECALL_COMPONENT_TEST
Test Microphone and GSM Antenna
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| TEST_STATUS | int | 1-byte 0x00 fail (DTCS logged) 0x01 pass (No DTCS logged) |
| RESULT | string | status |
BT_PAIRING_START
Initiate Bluetooth Pairing
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
BT_PAIRING_RESULT_LESEN
Lesen von Bluetooth Pairing Ergebnis
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| PAIRING_RESULT | int | table PairingResult SB |
| PAIRING_STATUS | string | OKAY, wenn fehlerfrei table PairingResult STATUS_TEXT |
BT_FIX_PASSKEY_SCHREIBEN
Write Bluetooth fix passkey
Arguments
| Name | Type | Comment |
|---|---|---|
| BT_FIX_PASSKEY | string |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
BT_FIX_PASSKEY_LESEN
Read Bluetooth fix passkey
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| BT_FIX_PASSKEY | string | 1 - 16 byte Bluetooth Fix Passkey |
BT_DEVICE_ADDRESS_LESEN
Read Bluetooth address
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| BT_ADDRESS | binary | 6 byte Bluetooth Adresse von TCU |
BT_USER_FRIENDLY_NAME_SCHREIBEN
Set Bluetooth user-friendly name
Arguments
| Name | Type | Comment |
|---|---|---|
| BT_USER_FRIENDLY_NAME | string | Bluetooth user-friendly name (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
BT_USER_FRIENDLY_NAME_LESEN
Read Bluetooth user-friendly name
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| BT_USER_FRIENDLY_NAME | string | 1 - 18 byte Bluetooth User-Friendly Name |
FG_ALS_BT_USER_FRIENDLY_NAME_SCHREIBEN
Write "BMW" + last 5 digits of FG as BT User-Friendly name Based on standard Codierjob C_FG_SCHREIBEN
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (17 oder 18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
BT_PAIRED_DEVICES_LESEN
Read Bluetooth paired devices
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| NUM_PAIRED_DEVICES | int | OKAY, wenn fehlerfrei |
BT_PAIRED_DEVICES_LIST_LESEN
Lesen von Liste mit Bluetooth Paired Devices
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| BT_PAIRED_DEVICES_LIST | binary | 1-5 Blutetooth 6-byte paired devices addresses |
BT_PAIRED_DEVICES_LOESCHEN
Delete list with Bluetooth paired devices
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
BT_PAIRABLE_MODE
Bring Bluetooth Server into pairable (and discoverable) mode
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
BT_ENABLE
Enable Bluetooth operation
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BT_DISABLE
Disable Bluetooth operation
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BT_OPERATIONMODE_LESEN
read if BT operation is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| BLUETOOTH_FLAG | int | 1-byte BT flag: 0x00 - disabled, 0x01 - enabled |
BT_HFP_ENABLE
Enable Bluetooth portable support
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BT_HFP_LESEN
Read status of Bluetooth portable HFP support
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| BT_HFP_FLAG | int | 1-byte 0x00 disabled, 0x01 - enabled |
BT_HFP_DISABLE
Disable Bluetooth portable HFP support
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
ECALL_ENABLE
Enable ecall
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
ECALL_DISABLE
Disable E-call
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
ECALL_STATUS_LESEN
read if E-call is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| E_CALL_FLAG | int | 1-byte E-call flag: 0x00 - disabled, 0x01 - enabled |
NAD_EQUIPPED_ENABLE
Enable NAD equipped coding parameter
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
NAD_EQUIPPED_DISABLE
Disable NAD equipped coding parameter
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
NAD_EQUIPPED_LESEN
Read status of the NAD equipped coding parameter
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| NAD_EQUIPPED_FLAG | int | 1-byte 0x00 disabled, 0x01 - enabled |
DSP_ACOUSTIC_PROFILE_LESEN
GAL: read DSP acoustic profile (1-16)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| DSP_ACOUSTIC_PROFILE | int | 1-byte DSP acoustic profile (1-16) |
GAL_KMH_PER_STAGE_SCHREIBEN
GAL: set km/h per amplification stage (10 - 60)
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | km/h per amplification stage (10-60) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
GAL_KMH_PER_STAGE_LESEN
GAL: read km/h per amplification stage (10 - 60)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| GAL_KMH_PER_STAGE | int | 1-byte km/h value per amplification stage for speed-dependent loudness |
TELEMATICS_STATUS_LESEN
read if telematics operation is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| TELEMATICS_FLAG | int | 1-byte telematics flag: 0x00 - disabled, 0x01 - enabled |
NON_TELEMATICS_E_CALL_STATUS_LESEN
read if non-telematic E-call (call 911/112) is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| NON_TELEMATIC_E_CALL_FLAG | int | 1-byte non-telematic E-call flag: 0x00 - disabled, 0x01 - enabled |
ICC_ID_LESEN
Read ICC ID
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| ICC_ID | string | 10 byte |
IMEI_LESEN
Read IMEI
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| IMEI | string | 15 byte |
US_ESN_MIN_LESEN
Read MIN in Ericsson CM-42 NAD for US telematics
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| US_MIN | string | 10-byte US-MIN in ASCII |
| US_ESN | string | 12-digits ESN |
US_CUST_CALLS_ENABLE
Enable customer calls over NAD with GMIN
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CUST_CALLS_DISABLE
Disable customer calls over NAD with GMIN
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CUST_CALLS_LESEN
Read if customer calls over NAD using telematic GMIN are enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CALLS_WITH_GMIN_FLAG | int | 1-byte calls with GMIN flag: 0x00 - disabled, 0x01 - enabled |
BACKUP_EMERGENCY_NO_SCHREIBEN
Set emergency number (e.g. 112/911) for non-telematic E-calls
Arguments
| Name | Type | Comment |
|---|---|---|
| EMERGENCY_NUM | string | (20 bytes, ASCII) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BACKUP_EMERGENCY_NO_LESEN
Read backup emergency number used for non-telematic E-calls (e.g.112/911)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| BACKUP_EMERGENCY_NUMBER | string | 20-byte phone number (ASCII, left-justified, unused bytes 0x00) |
US_CALL_SERVICE_CENTER_NUMBER_SCHREIBEN
Set phone number of call service number (Verizon)
Arguments
| Name | Type | Comment |
|---|---|---|
| SERV_CENT_NO | string | Service center number |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CALL_SERVICE_CENTER_NUMBER_LESEN
Read phone number of call service center (Verizon)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| US_CALL_SERVICE_CENTER_NUMBER | string | 20-byte phone number (ASCII, left-justified, unused bytes 0x00) |
US_CALL_SERVICE_CENTER_STATUS_LESEN
read if call service center (e.g. Verizon)is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CALL_SERVICE_CENTER_FLAG | int | 1-byte temporary storage of cutomer PIN flag: 0x00 - disabled, 0x01 - enabled |
US_MIN_SCHREIBEN
Set MIN in Ericsson CM-42 NAD for US telenatics
Arguments
| Name | Type | Comment |
|---|---|---|
| US_MIN | string | 10-stellige US MIN |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
FG_SCHREIBEN_AS_US_MIN
Write last 5 digits of FG in GMIN Based on standard Codierjob C_FG_SCHREIBEN
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
US_CDMA_DIRECTORY_SCHREIBEN
Set US CM-42 CDMA Directory 00000 00000 - 99999 99999
Arguments
| Name | Type | Comment |
|---|---|---|
| CDMA_DIR | string | OKAY, wenn fehlerfrei CDMA Directory |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CDMA_DIRECTORY_LESEN
CDMA Directory 00000 00000 00000 - 99999 99999 99999 -> 0x31..0x31 - 0x39..0x39
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CDMA_DIR | string | 1 - 15 digit CDMA Directory |
US_SID_NID_SCHREIBEN
Set US CM-42 System ID and Network ID
Arguments
| Name | Type | Comment |
|---|---|---|
| INDEX | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| SID | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| NID | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_SID_NID_LESEN
Read US CM-42 Home SID/NID list
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CM42_SID_NID_LIST | string | <index>:<sid>:<nid> ........ <index>:<sid>:<nid> in ASCII |
| SID | string | System ID |
| NID | string | Network ID |
| INDEX | string | Index |
US_CDMA_PRIMARY_CH_A_SCHREIBEN
Set US CM-42 CDMA Primary Channel A
Arguments
| Name | Type | Comment |
|---|---|---|
| CDMA_PA | string | 1.byte of Primary Channel A (1-311, 689-694, 1013-1023 as ASCII bytes) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CDMA_PRIMARY_CH_A_LESEN
Read US CM-42 CDMA Primary Channel (1-311, 689-694, 1013-1023 as ASCII bytes)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CDMA_PA | string | 1 - 4-byte CDMA Primary Channel A |
US_CDMA_SECONDARY_CH_A_SCHREIBEN
Set US CM-42 CDMA Secondary Channel A
Arguments
| Name | Type | Comment |
|---|---|---|
| CDMA_SA | string | 1.byte of Secondary Channel A (1-311, 689-694, 1013-1023 as ASCII bytes) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CDMA_SECONDARY_CH_A_LESEN
Read US CM-42 CDMA Secondary Channel A (1-311, 689-694, 1013-1023 as ASCII bytes)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CDMA_SA | string | 1 - 4-byte CDMA Secondary Channel A |
US_CDMA_PRIMARY_CH_B_SCHREIBEN
Set US CM-42 CDMA Primary Channel B
Arguments
| Name | Type | Comment |
|---|---|---|
| CDMA_PB | string | 1.byte of Primary Channel B (365-644, 739-777 as ASCII bytes) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CDMA_PRIMARY_CH_B_LESEN
Read US CM-42 CDMA Primary Channel B (365-644, 739-777 as ASCII bytes)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CDMA_PB | string | 1 - 4-byte CDMA Primary Channel B |
US_CDMA_SECONDARY_CH_B_SCHREIBEN
Set US CM-42 CDMA Secondary Channel B
Arguments
| Name | Type | Comment |
|---|---|---|
| CDMA_SB | string | 1.byte of Secondary Channel B (365-644, 739-777 as ASCII bytes) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_CDMA_SECONDARY_CH_B_LESEN
Read US CM-42 CDMA Secondary Channel B (365-644, 739-777 as ASCII bytes)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CDMA_SB | string | 1 - 4-byte CDMA Secondary Channel B |
US_HOME_ONLY_ENABLE
Enable Home Only
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_HOME_ONLY_DISABLE
Disable Home Only
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_HOME_ONLY_LESEN
read status of home only
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| HOME_ONLY_FLAG | int | 1-byte 0x00 disabled, 0x01 - enabled |
US_A_B_SIDE_SCHREIBEN
Set Home Only Status (0-3)
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | Home Only Status (0-3) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
VOICE_RECOGNITION_LANGUAGE_WRITE
Set the voice recognition language (CI >= 5)
Arguments
| Name | Type | Comment |
|---|---|---|
| LANGUAGE | int | Voice recognition language |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, BUSY, ERROR_.. |
VOICE_RECOGNITION_STATUS
Read voice recognition status (CI >= 5)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, BUSY, ERROR_.. |
| VR_STATUS | int | table VoiceRecProgStatusTexte WERT |
| VR_STATUS_TEXT | string | table VoiceRecProgStatusTexte STATUS_TEXT |
| VR_LANGUAGE | int | table VoiceRecLangTexte WERT |
| VR_LANGUAGE_TEXT | string | table VoiceRecLangTexte LANGUAGE_TEXT |
PSIM_LESEN
Read status of Prefit SIM
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| PSIM_FLAG | int | 1-byte 0x00 disabled, 0x01 - enabled |
PSIM_ENABLE
Enable Prefit SIM
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
PSIM_DISABLE
Disable Prefit SIM
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BT_ANTENNA_TEST
bt_antenna_test
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| BT_ANTENNA_FLAG | int | Bluetooth Antenna Flag 0x00: Passed 0x01: Failed |
| BT_ANTENNA_FLAG_TEXT | string | Bluetooth Antenna Flag als Textausgabe 0x00: Passed 0x01: Failed |
US_NAM_SELECT
Switch between CM42 NAM1 and NAM2 (Number Assignment Module) Note: New NAM becomes active after ending Diagnostic Mode
Arguments
| Name | Type | Comment |
|---|---|---|
| NAM | int | 0x01 = NAM1 0x02 = NAM2 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, BUSY, ERROR_.. |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_NAM_STATUS
Read active CM42 NAM (Number Assignment Module)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| NAM | int | 0x01 = NAM1 0x02 = NAM2 |
| JOB_STATUS | string | OKAY, BUSY, ERROR_.. |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_AMPS_PAGING_CH_LESEN
Read US CM-42 AMPS Initial Paging Channel 1 - 799, 990 - 1023 in ASCII
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CM42_PAGING_CHN | string | 2-byte AMPS Initial Paging Channel 1 - 799, 990 - 1023 |
US_AMPS_PAGING_CH_SCHREIBEN
Set US CM-42 AMPS Initial Paging Channel
Arguments
| Name | Type | Comment |
|---|---|---|
| AMPS_PAG | string | 1.byte of AMPS Paging Channel (1-799, 990-1023 in ASCII) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
US_AMPS_SID_LESEN
Read US CM-42 AMPS Home System ID 0 - 16387
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CM42_AMPS_SID | string | 1 - 5-byte AMPS Home SID (0 - 16387 -> 0x30 - 0x31 0x36 0x33 0x38 0x37) |
US_AMPS_SID_SCHREIBEN
Set US CM-42 AMPS Home System ID 0 - 16387
Arguments
| Name | Type | Comment |
|---|---|---|
| AMPS_SID | string | 1.byte of AMPS Home SID (0 - 16387 -> 0x30 - 0x31 0x36 0x33 0x38 0x37) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
NAD_INFORMATION
Read information about the current NAD Status DS2: Telegram 3F 04 C8 40 22 cs
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| NAD_REGISTERSTATE | unsigned char | NAD Register State 0x00 = not registered 0x01 = registered on GSM/CDMA/AMPS network |
| NAD_REGISTERSTATE_TEXT | string | NAD Register State als Textausgabe |
| NAD_SIGNALSTRENGTH | unsigned char | NAD Signal Strength 0 = -113 dBm or less 1-30 = -111 to -53 dBm, 2 dBm steps 31 = -51 dBm or greater 99 = unknown or not detectable |
| NAD_SIGNALSTRENGTH_DBM | char | NAD Signal Strength in dBm -113..-51 dBm 99 = unknown or not detectable |
| NAD_SIGNALBARS | unsigned char | NAD Signal in bars 0x00-0x05 = 0-5 bars 0xFF = unknown |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
Tables
Index
- JOBRESULT (13 × 2)
- LIEFERANTEN (76 × 2)
- ROVERPARTNUMPREFIX (21 × 2)
- DIGITALARGUMENT (17 × 2)
- JOBRESULTEXTENDED (1 × 2)
- FORTTEXTE (24 × 2)
- HORTTEXTE (1 × 2)
- IORTTEXTE (14 × 2)
- TCUTYPETEXTE (4 × 2)
- PAIRINGRESULTTEXTE (3 × 2)
- GPSSTATUSTEXTE (14 × 2)
- FARTTEXTE (3 × 2)
- IARTTEXTE (3 × 2)
- VOICERECLANGTEXTE (8 × 2)
- VOICERECPROGSTATUSTEXTE (4 × 2)
- NADSTATUSTEXTE (3 × 2)
- BLUETOOTHANTENNASTATUSTEXTE (3 × 2)
JOBRESULT
Dimensions: 13 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xA0 | OKAY |
| 0xA1 | BUSY |
| 0xA2 | ERROR_ECU_REJECTED |
| 0xB0 | ERROR_ECU_PARAMETER |
| 0xB1 | ERROR_ECU_FUNCTION |
| 0xB2 | ERROR_ECU_NUMBER |
| 0xFF | ERROR_ECU_NACK |
| ?10? | ERROR_ARGUMENT |
| ?20? | ERROR_FEHLERANZAHL |
| ?70? | ERROR_NUMBER_ARGUMENT |
| ?71? | ERROR_RANGE_ARGUMENT |
| ?72? | ERROR_VERIFY |
| 0x?? | ERROR_ECU_UNKNOWN_STATUSBYTE |
LIEFERANTEN
Dimensions: 76 rows × 2 columns
| LIEF_NR | LIEF_TEXT |
|---|---|
| 0x01 | Reinshagen => Delphi |
| 0x02 | Kostal |
| 0x03 | Hella |
| 0x04 | Siemens |
| 0x05 | Eaton |
| 0x06 | UTA |
| 0x07 | Helbako |
| 0x08 | Bosch |
| 0x09 | Loewe => Lear |
| 0x10 | VDO |
| 0x11 | Valeo |
| 0x12 | MBB |
| 0x13 | Kammerer |
| 0x14 | SWF |
| 0x15 | Blaupunkt |
| 0x16 | Philips |
| 0x17 | Alpine |
| 0x18 | Continental Teves |
| 0x19 | Elektromatik Suedafrika |
| 0x20 | Becker |
| 0x21 | Preh |
| 0x22 | Alps |
| 0x23 | Motorola |
| 0x24 | Temic |
| 0x25 | Webasto |
| 0x26 | MotoMeter |
| 0x27 | Delphi PHI |
| 0x28 | DODUCO => BERU |
| 0x29 | DENSO |
| 0x30 | NEC |
| 0x31 | DASA |
| 0x32 | Pioneer |
| 0x33 | Jatco |
| 0x34 | Fuba |
| 0x35 | UK-NSI |
| 0x36 | AABG |
| 0x37 | Dunlop |
| 0x38 | Sachs |
| 0x39 | ITT |
| 0x40 | FTE |
| 0x41 | Megamos |
| 0x42 | TRW |
| 0x43 | Wabco |
| 0x44 | ISAD Electronic Systems |
| 0x45 | HEC (Hella Electronics Corporation) |
| 0x46 | Gemel |
| 0x47 | ZF |
| 0x48 | GMPT |
| 0x49 | Harman Kardon |
| 0x50 | Remes |
| 0x51 | ZF Lenksysteme |
| 0x52 | Magneti Marelli |
| 0x53 | Borg Instruments |
| 0x54 | GETRAG |
| 0x55 | BHTC (Behr Hella Thermocontrol) |
| 0x56 | Siemens VDO Automotive |
| 0x57 | Visteon |
| 0x58 | Autoliv |
| 0x59 | Haberl |
| 0x60 | Magna Steyr |
| 0x61 | Marquardt |
| 0x62 | AB-Elektronik |
| 0x63 | Siemens VDO Borg |
| 0x64 | Hirschmann Electronics |
| 0x65 | Hoerbiger Electronics |
| 0x66 | Thyssen Krupp Automotive Mechatronics |
| 0x67 | Gentex GmbH |
| 0x68 | Atena GmbH |
| 0x69 | Magna-Donelly |
| 0x70 | Koyo Steering Europe |
| 0x71 | NSI B.V |
| 0x72 | ASIN AWCO.LTD |
| 0x73 | Shorlock |
| 0x74 | Schrader |
| 0x75 | BERU Electronics GmbH |
| 0xFF | unbekannter Hersteller |
ROVERPARTNUMPREFIX
Dimensions: 21 rows × 2 columns
| ROVER_NR | PREFIX |
|---|---|
| 0xA0 | AMR |
| 0xA1 | HHF |
| 0xA2 | JFC |
| 0xA3 | MKC |
| 0xA4 | SCB |
| 0xA5 | SRB |
| 0xA6 | XQC |
| 0xA7 | XQD |
| 0xA8 | XQE |
| 0xA9 | XVD |
| 0xAA | YAC |
| 0xAB | YDB |
| 0xAC | YFC |
| 0xAD | YUB |
| 0xAE | YWC |
| 0xAF | YWQ |
| 0xB0 | EGQ |
| 0xB1 | YIB |
| 0xB2 | YIC |
| 0xB3 | YIE |
| 0xXY | ??? |
DIGITALARGUMENT
Dimensions: 17 rows × 2 columns
| TEXT | WERT |
|---|---|
| ein | 1 |
| aus | 0 |
| ja | 1 |
| nein | 0 |
| auf | 1 |
| ab | 0 |
| an | 1 |
| yes | 1 |
| no | 0 |
| on | 1 |
| off | 0 |
| up | 1 |
| down | 0 |
| true | 1 |
| false | 0 |
| 1 | 1 |
| 0 | 0 |
JOBRESULTEXTENDED
Dimensions: 1 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xXY | ERROR_UNKNOWN |
FORTTEXTE
Dimensions: 24 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0x068 | Kurzschluss in der GPS Antenne |
| 0x069 | GPS Antenne nicht angeschlossen |
| 0x06A | Hardware Fehler im GPS Modul |
| 0x06B | Kommunikation mit dem GPS Modul gestoert |
| 0x06D | E-call nicht angeschlossen |
| 0x06E | Fehler mit der E-call LED |
| 0x070 | E-call ist kurzgeschlossen |
| 0x073 | Fehler non-volatile Speicherbereich |
| 0x074 | E-call button stuck |
| 0x079 | Interne Fehler mit dem BT Interface |
| 0x07A | Energiesparmode aktiv |
| 0x07E | Fehler mit der backup Battery |
| 0x07F | B-call ist kurzgeschlossen |
| 0x080 | B-call nicht angeschlossen |
| 0x081 | B-call button stuck |
| 0x090 | Backup Antenna Disconnected |
| 0x091 | Primary GSM Antenna Disconnected/Short |
| 0x097 | BT Cradle Stuck Button |
| 0x098 | Microphone Disconnected |
| 0x0A0 | Prefit SIM Not Present |
| 0x0A1 | Prefit SIM Lesen Error |
| 0x0A2 | Prefit SIM Pin Locked |
| 0x0A3 | Bluetooth Antenna Error |
| 0xXY | unbekannte Fehlerart |
HORTTEXTE
Dimensions: 1 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0xFFFF | unbekannter Fehlerort |
IORTTEXTE
Dimensions: 14 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0x008 | Software Reset Fehler |
| 0x011 | I-Bus Fehler |
| 0x012 | Low RF |
| 0x013 | NVM korrumpiert |
| 0x014 | Fehler mit der Codierung |
| 0x015 | Fehler mit dem Transceiver |
| 0x016 | Fehler mit dem Handy |
| 0x017 | E-call LED not ok / Fehler mit der E-call LED |
| 0x018 | GPS COMMS Failure / Kommunikation mit dem GPS Modul gestoert |
| 0x01A | Prefit SIM Not Present |
| 0x01B | Prefit SIM Lesen Error |
| 0x01C | Prefit SIM Pin Locked |
| 0x01D | Prefit SIM Network Error |
| 0xXY | unbekannte Fehlerart |
TCUTYPETEXTE
Dimensions: 4 rows × 2 columns
| TCU_TYPE | TCU_TYPE_TEXT |
|---|---|
| 0x05 | I-bus ECE BTHS |
| 0x06 | I-bus US |
| 0x08 | I-bus ECE HFP |
| 0xXY | unbekannte TCU |
PAIRINGRESULTTEXTE
Dimensions: 3 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0x00 | SUCCESS |
| 0x01 | FAILURE |
| 0x02 | WAITING |
GPSSTATUSTEXTE
Dimensions: 14 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Kein GPS |
| 0x01 | Kommunikationsfehler |
| 0x02 | GPS Empfängerfehler |
| 0x03 | Kein Almanach |
| 0x04 | Suche Satellit |
| 0x05 | Verfolge 1 Satellit |
| 0x06 | Verfolge 2 Satelliten |
| 0x07 | Verfolge 3 Satelliten |
| 0x08 | Verfolge 4 Satelliten |
| 0x09 | Verfolge 5 Satelliten |
| 0x0A | Verfolge 6 Satelliten |
| 0x0B | 2D Positionierung |
| 0x0C | 3D Positionierung |
| 0xXY | nicht definiert |
FARTTEXTE
Dimensions: 3 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | Fehler momentan nicht vorhanden |
| 0x01 | Fehler momentan vorhanden |
| 0xXY | unbekannte Fehlerart |
IARTTEXTE
Dimensions: 3 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | Fehler momentan nicht vorhanden |
| 0x01 | Fehler momentan vorhanden |
| 0xXY | unbekannte Fehlerart |
VOICERECLANGTEXTE
Dimensions: 8 rows × 2 columns
| WERT | LANGUAGE_TEXT |
|---|---|
| 0x00 | German |
| 0x01 | US_English |
| 0x02 | UK_English |
| 0x03 | Italien |
| 0x04 | French |
| 0x05 | Spanish |
| 0xFF | No language, flash programming failed |
| 0xXY | nicht definiert |
VOICERECPROGSTATUSTEXTE
Dimensions: 4 rows × 2 columns
| WERT | STATUS_TEXT |
|---|---|
| 0x00 | Flash programming successful |
| 0x01 | Flash programming ongoing |
| 0x02 | Flash programming failed |
| 0xXY | nicht definiert |
NADSTATUSTEXTE
Dimensions: 3 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Not registered |
| 0x01 | Registered |
| 0xXY | nicht definiert |
BLUETOOTHANTENNASTATUSTEXTE
Dimensions: 3 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Passed |
| 0x01 | Failed |
| 0xXY | nicht definiert |