telibus3.prg
INFO
| Field | Value |
|---|---|
| ECU | TCU 1.5 Malapert I-Bus |
| ORIGIN | BMW EI-43 Snijders |
| REVISION | 1.400 |
| AUTHOR | BMW EI-43 Snijders |
| COMMENT | N/A |
| PACKAGE | 1.03 |
| SPRACHE | deutsch |
Jobs
Index
- INITIALISIERUNG - Initialisierung und Kommunikationsparameter DS2
- INFO - Information SGBD
- IDENT - Identdaten
- FS_LESEN - Fehlerspeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
- FS_LOESCHEN - Fehlerspeicher loeschen
- PRUEFSTEMPEL_LESEN - Auslesen des Pruefstempels
- PRUEFSTEMPEL_SCHREIBEN - Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden.
- IS_LESEN - Infospeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
- STEUERGERAETE_RESET - Steuergeraete Reset ausloesen
- ENERGIESPARMODE - Einstellen des Energiesparmodes
- SLEEP_MODE - SG in Sleep-Mode versetzen
- DIAGNOSE_AUFRECHT - Diagnosemode aufrechterhalten
- DIAGNOSE_ENDE - Diagnose beenden
- C_FG_LESEN - Fahrgestellnummer lesen Standard Codierjob
- C_FG_AUFTRAG - Fahrgestellnummer schreiben und ruecklesen Standard Codierjob
- HW_SELFTEST - Start hardware selftest
- HW_SELFTEST_STATUS - Status of hardware selftest
- TCU_TYPE_LESEN - Read the hardware type ID of the TCU
- US_ESN_MIN_LESEN - Read ESN, MDN and MIN from the TCU US NAD
- ECALL_BCALL_BUTTON_TEST - Test E-Call and B-Call button
- ECALL_COMPONENT_TEST - Test microphone and antenna
- BT_ANTENNA_TEST - bt_antenna_test
- BT_USER_FRIENDLY_NAME_LESEN - Read Bluetooth user friendly name
- BT_USER_FRIENDLY_NAME_SCHREIBEN - Write Bluetooth user friendly name
- BT_PAIRED_DEVICES_LOESCHEN - Delete list with Bluetooth paired devices
- US_NAM_SELECT - Switch between NAM1 and NAM2 (Number Assignment Module) Note: New NAM becomes active after ending Diagnostic Mode
- US_NAM_STATUS - Read active NAM (Number Assignment Module)
- US_SID_NID_LESEN - Read US Home System ID and Network ID list
- US_SID_NID_SCHREIBEN - Set US Home System ID and Network ID Requires US_NAD_SCANNING_STOP to be executed before writing
- RESET_MODE - Force software reset of the TCU control unit Reset occurs approx. 2 seconds after sending
- BT_PAIRABLE_MODE - Bring Bluetooth server into pairable (and discoverable) mode
- US_HOME_ONLY_A_B_SIDE - Read or set home only and A/B side scanning Requires US_NAD_SCANNING_STOP to be executed before writing
- US_CUSTOMER_CALLS - Read or set customer calls over NAD
- NAD_INFORMATION - Read information about the current NAD Status
- US_NAD_SCANNING_START - Start scanning of the US CDMA/AMPS NAD Ignition cycle will also re-start NAD scanning
- US_NAD_SCANNING_STOP - Stop scanning of the US CDMA/AMPS NAD Job needs to be sent before writing NAD parameters Stopping NAD scanning takes up to 5 seconds
- FAHRGESTELLNUMMER_VIN_LESEN - Read 7 digit Vehicle Identification Number from TCU coding data
- FAHRGESTELLNUMMER_VIN_SCHREIBEN - Write 7 digit Vehicle Identification Number into TCU coding data
- NAD_EQUIPPED - Read or set NAD equipped
- US_CDMA_CHANNELS - Read or set primary/secondary CDMA channel A/B Requires US_NAD_SCANNING_STOP to be executed before writing
- US_AMPS_PAGING_CHANNEL - Read or set AMPS paging channel Requires US_NAD_SCANNING_STOP to be executed before writing
- US_AMPS_SID_LESEN - Read US CM-42 AMPS Home System ID 0 - 16387
- US_AMPS_SID_SCHREIBEN - Set US CM-42 AMPS Home System ID 0 - 16387 Requires US_NAD_SCANNING_STOP to be executed before writing
- BT_FIX_PASSKEY_LESEN - Read Bluetooth fix passkey
- BT_FIX_PASSKEY_SCHREIBEN - Write Bluetooth fix passkey
- GPS_DATE_TIME - Read date and time of the external (NAVI) or internal GPS
- STATUS_GPS - Status of the internal GPS module
- STATUS_IO_LESEN - Read I/O port status
- STATUS_IO_SCHREIBEN - Set and read I/O port status
- C_C_AUFTRAG - Codierdaten schreiben und verifizieren
- C_C_LESEN - Codierdaten lesen
- FG_ALS_BT_USER_FRIENDLY_NAME_SCHREIBEN - Write "BMW" + last 5 digits of FG as BT User-Friendly name Based on standard Codierjob C_FG_SCHREIBEN
- BT_OPERATIONMODE_LESEN - read if BT operation is enabled or disabled
- BT_DISABLE - Unset Bluetooth Masterbit
- BT_ENABLE - Set Bluetooth Masterbit
- ECALL_STATUS_LESEN - read if E-call is enabled or disabled
- ECALL_DISABLE - Unset E-Call Masterbit
- ECALL_ENABLE - Set E-Call Masterbit
- BT_PAIRED_DEVICES_LESEN - Read Bluetooth paired devices
- US_CALL_SERVICE_CENTER_NUMBER_LESEN - Read phone number of call service center
- US_CALL_SERVICE_CENTER_NUMBER_SCHREIBEN - Set phone number of call service center
- US_MIN_LESEN - Read MIN (Mobile Identification Number)
- US_MIN_SCHREIBEN - Set MIN (Mobile Identification Number) Requires US_NAD_SCANNING_STOP to be executed before writing
- US_MDN_LESEN - Read MDN (CDMA Mobile Directory Number)
- US_MDN_SCHREIBEN - Set MDN (CDMA Mobile Directory Number) Requires US_NAD_SCANNING_STOP to be executed before writing
- IMEI_LESEN - Read IMEI
- ICC_ID_LESEN - Read ICC ID
INITIALISIERUNG
Initialisierung und Kommunikationsparameter DS2
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| DONE | int | 1, wenn Okay |
INFO
Information SGBD
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| ECU | string | Steuergerät im Klartext |
| ORIGIN | string | Steuergeräte-Verantwortlicher |
| REVISION | string | Versions-Nummer |
| AUTHOR | string | Namen aller Autoren |
| COMMENT | string | wichtige Hinweise |
| PACKAGE | string | Include-Paket-Nummer |
| SPRACHE | string | deutsch, english |
IDENT
Identdaten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| ID_BMW_NR | string | BMW-Teilenummer |
| ID_HW_NR | int | BMW-Hardwarenummer |
| ID_COD_INDEX | int | Codier-Index |
| ID_DIAG_INDEX | int | Diagnose-Index |
| ID_BUS_INDEX | int | Bus-Index |
| ID_DATUM_KW | int | Herstelldatum KW |
| ID_DATUM_JAHR | int | Herstelldatum Jahr |
| ID_LIEF_NR | int | Lieferanten-Nummer |
| ID_LIEF_TEXT | string | Lieferanten-Nummer |
| ID_SW_NR | int | Softwarenummer |
| TELEGRAMM | binary | Antworttelegramm |
FS_LESEN
Fehlerspeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| F_ORT_NR | int | Index fuer Fehlerort |
| F_ORT_TEXT | string | Text zu Fehlerort table FOrtTexte ORTTEXT |
| F_HFK | int | Fehlerhaeufigkeit |
| F_ART_ANZ | int | Anzahl der Fehlerarten immer 1 |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen immer 0 |
| F_ART1_NR | int | |
| F_ART1_TEXT | string | table FArtTexte ARTTEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
FS_LOESCHEN
Fehlerspeicher loeschen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
PRUEFSTEMPEL_LESEN
Auslesen des Pruefstempels
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| BYTE1 | int | 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | 0-255 bzw. 0x00-0xFF |
| FG_ZIFFERN | string | die letzten vier Stellen der Fahrgestellnummer |
| TELEGRAMM | binary | Antworttelegramm |
PRUEFSTEMPEL_SCHREIBEN
Beschreiben des Pruefstempels Es muessen immer alle drei Argumente im Bereich von 0-255 bzw. 0x00-0xFF uebergeben werden.
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | 0-255 bzw. 0x00-0xFF |
| BYTE2 | int | 0-255 bzw. 0x00-0xFF |
| BYTE3 | int | 0-255 bzw. 0x00-0xFF |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei ERROR_ARGUMENT, wenn Argumente nicht uebergeben oder ausser Bereich |
IS_LESEN
Infospeicher lesen Low-Konzept nach Lastenheft Codierung/Diagnose
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| F_ORT_NR | int | Index fuer Fehlerort |
| F_ORT_TEXT | string | Text zu Fehlerort table IOrtTexte ORTTEXT |
| F_HFK | int | Fehlerhaeufigkeit |
| F_ART_ANZ | int | Anzahl der Fehlerarten immer 1 |
| F_UW_ANZ | int | Anzahl der Umweltbedingungen immer 0 |
| F_ART1_NR | int | |
| F_ART1_TEXT | string | table IArtTexte ARTTEXT |
| F_HEX_CODE | binary | Fehlerdaten pro Fehler als Hexcode |
STEUERGERAETE_RESET
Steuergeraete Reset ausloesen
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ENERGIESPARMODE
Einstellen des Energiesparmodes
Arguments
| Name | Type | Comment |
|---|---|---|
| PRODUKTIONSMODE | string | "ein" -> Produktions Mode ein "aus" -> Produktions Mode aus table DigitalArgument TEXT Default: "aus" |
| TRANSPORTMODE | string | "ein" -> Transport Mode ein "aus" -> Transport Mode aus table DigitalArgument TEXT Default: "aus" |
| WERKSTATTMODE | string | "ein" -> Werkstatt Mode ein "aus" -> Werkstatt Mode aus table DigitalArgument TEXT Default: "aus" |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TEL_AUFTRAG | binary | Hex-Auftrag an SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
SLEEP_MODE
SG in Sleep-Mode versetzen
Arguments
| Name | Type | Comment |
|---|---|---|
| ZEIT | real | a) Zeit nach der das Steuergerät einschläft Bereich : 0.5 bis 20.0 [Sekunden] Auflösung : 0.5 [Sekunden] => zeitgesteuerter Power-Down (0x9B) wird aktiviert b) Default: (Es wird kein Argument übergeben!) => normaler Power-Down (0x9D) wird aktiviert |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
| _TEL_AUFTRAG | binary | Hex-Auftrag von SG |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
DIAGNOSE_AUFRECHT
Diagnosemode aufrechterhalten
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
DIAGNOSE_ENDE
Diagnose beenden
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei |
C_FG_LESEN
Fahrgestellnummer lesen Standard Codierjob
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| FG_NR | string | die letzten vier Stellen der Fahrgestellnummer |
| _TELEGRAMM | binary | Antworttelegramm |
C_FG_AUFTRAG
Fahrgestellnummer schreiben und ruecklesen Standard Codierjob
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
HW_SELFTEST
Start hardware selftest
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
HW_SELFTEST_STATUS
Status of hardware selftest
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| RESULT_BYTE1 | char | |
| RESULT_BYTE2 | char | |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
TCU_TYPE_LESEN
Read the hardware type ID of the TCU
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurred |
| TCU_TYPE | int | TCU Type |
| TCU_TYPE_TEXT | string | TCU Type |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_ESN_MIN_LESEN
Read ESN, MDN and MIN from the TCU US NAD
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| US_ESN | string | NAD Electronic Serial Number |
| US_MDN | string | NAD Mobile Directory Number |
| US_MIN | string | NAD Mobile Identification Number |
| _ESN_ANTWORT | binary | Hex-Antwort von SG |
| _MDN_ANTWORT | binary | Hex-Antwort von SG |
| _MIN_ANTWORT | binary | Hex-Antwort von SG |
ECALL_BCALL_BUTTON_TEST
Test E-Call and B-Call button
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| TEST_STATUS | int | 0x00 fail (DTCS logged) 0x01 pass (No DTCS logged) |
| RESULT | string | status |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ECALL_COMPONENT_TEST
Test microphone and antenna
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| TEST_STATUS | int | 0x00 fail (DTCS logged) 0x01 pass (No DTCS logged) |
| RESULT | string | status |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_ANTENNA_TEST
bt_antenna_test
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurred |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
| BT_ANTENNA_FLAG | int | Bluetooth Antenna Flag 0x00: Passed 0x01: Failed |
| BT_ANTENNA_FLAG_TEXT | string | Bluetooth Antenna Flag als Textausgabe |
BT_USER_FRIENDLY_NAME_LESEN
Read Bluetooth user friendly name
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| BT_USER_FRIENDLY_NAME | string | Bluetooth user friendly name |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_USER_FRIENDLY_NAME_SCHREIBEN
Write Bluetooth user friendly name
Arguments
| Name | Type | Comment |
|---|---|---|
| BT_USER_FRIENDLY_NAME | string | Bluetooth user friendly name |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_PAIRED_DEVICES_LOESCHEN
Delete list with Bluetooth paired devices
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_NAM_SELECT
Switch between NAM1 and NAM2 (Number Assignment Module) Note: New NAM becomes active after ending Diagnostic Mode
Arguments
| Name | Type | Comment |
|---|---|---|
| NAM | int | 0x01 = NAM1 0x02 = NAM2 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_NAM_STATUS
Read active NAM (Number Assignment Module)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| NAM | int | 0x01 = NAM1 0x02 = NAM2 |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_SID_NID_LESEN
Read US Home System ID and Network ID list
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| CM42_SID_NID_LIST | string | <index>:<sid>:<nid> ........ <index>:<sid>:<nid> in ASCII |
| SID | string | System ID |
| NID | string | Network ID |
| INDEX | string | Index |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_SID_NID_SCHREIBEN
Set US Home System ID and Network ID Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| INDEX | string | Range 0-256 |
| SID | string | Range 0-32176 |
| NID | string | Range 0-65535 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
RESET_MODE
Force software reset of the TCU control unit Reset occurs approx. 2 seconds after sending
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_PAIRABLE_MODE
Bring Bluetooth server into pairable (and discoverable) mode
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_HOME_ONLY_A_B_SIDE
Read or set home only and A/B side scanning Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| INPUT | char | Empty to read current status, or 0x00 for Normal 0x01 for Home only 0x02 for A side scanning 0x03 for B side scanning |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STATUS | char | Status of home only or A/B side scanning (-> INPUT parameter) |
| STATUS_TEXT | string | Status als Textausgabe |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_CUSTOMER_CALLS
Read or set customer calls over NAD
Arguments
| Name | Type | Comment |
|---|---|---|
| INPUT | char | Empty to read current status, or 0x00 to disable 0x01 to enable |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STATUS | char | Status of customer calls over NAD (-> INPUT parameter) |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
NAD_INFORMATION
Read information about the current NAD Status
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| NAD_REGISTERSTATE | unsigned char | NAD Register State 0x00 = not registered 0x01 = registered on GSM/CDMA/AMPS network |
| NAD_REGISTERSTATE_TEXT | string | NAD Register State als Textausgabe |
| NAD_SIGNALSTRENGTH | unsigned char | NAD Signal Strength 0 = -113 dBm or less 1-30 = -111 to -53 dBm, 2 dBm steps 31 = -51 dBm or greater 99 = unknown or not detectable |
| NAD_SIGNALSTRENGTH_DBM | char | NAD Signal Strength in dBm -113..-51 dBm 99 = unknown or not detectable |
| NAD_SIGNALBARS | unsigned char | NAD Signal in bars 0x00-0x05 = 0-5 bars 0xFF = unknown or not detectable |
| NAD_ROAMING | char | NAD Roaming Status 0x00 = not roaming 0x01 = Roaming on network 0x02 = Roaming off network 0xFF = unknown or not detectable |
| NAD_ROAMING_TEXT | string | NAD Roaming Status als Textausgabe |
| SID | string | System ID SID on which NAD is registered |
| NID | string | Network ID NID on which NAD is registered |
| MCC | string | Mobile Country Code MCC on which NAD is registered |
| MNC | string | Mobile Network Code MNC on which NAD is registered |
| PRL | string | Preferred Roaming List PRL |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_NAD_SCANNING_START
Start scanning of the US CDMA/AMPS NAD Ignition cycle will also re-start NAD scanning
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| RESULT | char | Result 0x00 Success, 0x01 Error |
| RESULT_TEXT | string | Result als Textausgabe |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_NAD_SCANNING_STOP
Stop scanning of the US CDMA/AMPS NAD Job needs to be sent before writing NAD parameters Stopping NAD scanning takes up to 5 seconds
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| RESULT | char | Result 0x00 Success, 0x01 Error |
| RESULT_TEXT | string | Result als Textausgabe |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FAHRGESTELLNUMMER_VIN_LESEN
Read 7 digit Vehicle Identification Number from TCU coding data
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| VIN | binary | Vehicle Identification Number |
| VIN_TEXT | string | Vehicle Identification Number |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
FAHRGESTELLNUMMER_VIN_SCHREIBEN
Write 7 digit Vehicle Identification Number into TCU coding data
Arguments
| Name | Type | Comment |
|---|---|---|
| VIN | string | Vehicle Identification Number |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
NAD_EQUIPPED
Read or set NAD equipped
Arguments
| Name | Type | Comment |
|---|---|---|
| INPUT | char | Empty to read current status, or 0x00 = NAD not equipped 0x01 = NAD equipped |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STATUS | char | Status of NAD equipped (see INPUT parameter) |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_CDMA_CHANNELS
Read or set primary/secondary CDMA channel A/B Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| PRIMARY_SECONDARY | char | Priority: 1 = primary, 2 = secondary |
| A_B | string | Channel: A, B |
| VALUE | string | Empty to request current value, or value to be programmed for CDMA channel Channel A: 1-311, 689-694, 1013-1023 Channel B: 356-644, 739-777 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| CHANNEL | string | Value of requested CDMA channel |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_AMPS_PAGING_CHANNEL
Read or set AMPS paging channel Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| VALUE | string | Empty to request current value, or value to be programmed for AMPS paging channel Channel: 1-799, 990-1023 |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| CHANNEL | string | Value of AMPS paging channel |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_AMPS_SID_LESEN
Read US CM-42 AMPS Home System ID 0 - 16387
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| CM42_AMPS_SID | string | 1 - 5-byte AMPS Home SID (0 - 16387 -> 0x30 - 0x31 0x36 0x33 0x38 0x37) |
US_AMPS_SID_SCHREIBEN
Set US CM-42 AMPS Home System ID 0 - 16387 Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| AMPS_SID | string | 1.byte of AMPS Home SID (0 - 16387 -> 0x30 - 0x31 0x36 0x33 0x38 0x37) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
BT_FIX_PASSKEY_LESEN
Read Bluetooth fix passkey
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| BT_FIX_PASSKEY | string | 1 - 16 byte Bluetooth Fix Passkey |
BT_FIX_PASSKEY_SCHREIBEN
Write Bluetooth fix passkey
Arguments
| Name | Type | Comment |
|---|---|---|
| BT_FIX_PASSKEY | string |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
GPS_DATE_TIME
Read date and time of the external (NAVI) or internal GPS
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| GPS_DATE | string | Current GPS date (dd.mm.yyyy) |
| GPS_TIME | string | Current GPS time (hh:mm:ss) |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_GPS
Status of the internal GPS module
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STAT_GPS | char | GPS status 0x00 = Not supported: No GPS 0x01 = Not supported: Communication error 0x02 = Receiver error 0x03 = No almanac 0x04 = Searching satellites 0x05 = Tracking 1 satellite 0x06 = Tracking 2 satellites 0x07 = Tracking 3 satellites 0x08 = Tracking 4 satellites 0x09 = Tracking 5 satellites 0x0A = Tracking 6 satellites 0x0B = 2D positioning 0x0C = 3D positioning |
| STAT_GPS_TEXT | string | GPS status als Textausgabe |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
STATUS_IO_LESEN
Read I/O port status
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STAT_E_CALL_EIN | int | e-call line from button 1=open, 0=closed (button pressed) |
| STAT_B_CALL_EIN | int | b-call line from button 1=open, 0=closed (button pressed) |
| STAT_BLUETOOTH_EIN | int | status of bluetooth 1=enable, 0=disable |
STATUS_IO_SCHREIBEN
Set and read I/O port status
Arguments
| Name | Type | Comment |
|---|---|---|
| BYTE1 | int | 1.byte with portdata |
| BYTE2 | int | 2.byte with portdata |
| BYTE3 | int | 3.byte with portdata |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| STAT_SOS_LED_EIN | int | 1=active, 0=not active |
| STAT_MUTE_EIN | int | 1=active, 0=not active |
C_C_AUFTRAG
Codierdaten schreiben und verifizieren
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Codierdaten |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
C_C_LESEN
Codierdaten lesen
Arguments
| Name | Type | Comment |
|---|---|---|
| BINAER_BUFFER | binary | Codierdaten |
Results
| Name | Type | Comment |
|---|---|---|
| CODIER_DATEN | binary | Codierdaten |
| JOB_STATUS | string | OKAY, ERROR_.. |
FG_ALS_BT_USER_FRIENDLY_NAME_SCHREIBEN
Write "BMW" + last 5 digits of FG as BT User-Friendly name Based on standard Codierjob C_FG_SCHREIBEN
Arguments
| Name | Type | Comment |
|---|---|---|
| FG_NR | string | Fahrgestellnummer (17 oder 18-stellig) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, wenn fehlerfrei table JobResult STATUS_TEXT |
| _TELEGRAMM | binary | Antworttelegramm |
BT_OPERATIONMODE_LESEN
read if BT operation is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| BLUETOOTH_FLAG | int | 1-byte BT flag: 0x00 - disabled, 0x01 - enabled |
BT_DISABLE
Unset Bluetooth Masterbit
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_ENABLE
Set Bluetooth Masterbit
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ECALL_STATUS_LESEN
read if E-call is enabled or disabled
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, ERROR_.. |
| E_CALL_FLAG | int | 1-byte E-call flag: 0x00 - disabled, 0x01 - enabled |
ECALL_DISABLE
Unset E-Call Masterbit
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
ECALL_ENABLE
Set E-Call Masterbit
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
BT_PAIRED_DEVICES_LESEN
Read Bluetooth paired devices
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| NUM_PAIRED_DEVICES | int | Number of Bluetooth paired devices |
| BT_PAIRED_DEVICES_LIST | binary | Bluetooth 6-byte paired devices addresses |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_CALL_SERVICE_CENTER_NUMBER_LESEN
Read phone number of call service center
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| US_CALL_SERVICE_CENTER_NUMBER | string | Service center number |
US_CALL_SERVICE_CENTER_NUMBER_SCHREIBEN
Set phone number of call service center
Arguments
| Name | Type | Comment |
|---|---|---|
| SERV_CENT_NO | string | Service center number |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
US_MIN_LESEN
Read MIN (Mobile Identification Number)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| US_MIN | string | Mobile Identification Number |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_MIN_SCHREIBEN
Set MIN (Mobile Identification Number) Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| US_MIN | string | Value to be programmed for MIN (10 digits) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_MDN_LESEN
Read MDN (CDMA Mobile Directory Number)
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| US_MDN | string | CDMA Mobile Directory Number |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
US_MDN_SCHREIBEN
Set MDN (CDMA Mobile Directory Number) Requires US_NAD_SCANNING_STOP to be executed before writing
Arguments
| Name | Type | Comment |
|---|---|---|
| US_MDN | string | Value to be programmed for MDN (15 digits) |
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | OKAY, if no error occurs |
| _TEL_ANTWORT | binary | Hex-Antwort von SG |
IMEI_LESEN
Read IMEI
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| IMEI | string | 15 byte |
ICC_ID_LESEN
Read ICC ID
No arguments.
Results
| Name | Type | Comment |
|---|---|---|
| JOB_STATUS | string | Status der Kommunikation (z.B. ACK) |
| ICC_ID | string | 10 byte |
Tables
Index
- JOBRESULT (13 × 2)
- LIEFERANTEN (86 × 2)
- ROVERPARTNUMPREFIX (21 × 2)
- DIGITALARGUMENT (17 × 2)
- JOBRESULTEXTENDED (1 × 2)
- FDETAILSTRUKTUR (3 × 2)
- HDETAILSTRUKTUR (7 × 2)
- IDETAILSTRUKTUR (7 × 2)
- FORTTEXTE (23 × 2)
- HORTTEXTE (1 × 2)
- IORTTEXTE (11 × 2)
- FARTTEXTE (3 × 2)
- IARTTEXTE (3 × 2)
- BLUETOOTHANTENNASTATUSTEXTE (3 × 2)
- GPSSTATUSTEXTE (14 × 2)
- NADSTATUSTEXTE (3 × 2)
- PAIRINGRESULTTEXTE (4 × 2)
- TCUTYPETEXTE (4 × 2)
- VOICERECLANGTEXTE (8 × 2)
- VOICERECPROGSTATUSTEXTE (4 × 2)
- ROAMINGSTATUSTEXTE (4 × 2)
- PRLSTATUSTEXTE (10 × 2)
- RESULTTEXTE (3 × 2)
- HOMEONLYABSIDETEXTE (5 × 2)
JOBRESULT
Dimensions: 13 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xA0 | OKAY |
| 0xA1 | BUSY |
| 0xA2 | ERROR_ECU_REJECTED |
| 0xB0 | ERROR_ECU_PARAMETER |
| 0xB1 | ERROR_ECU_FUNCTION |
| 0xB2 | ERROR_ECU_NUMBER |
| 0xFF | ERROR_ECU_NACK |
| ?10? | ERROR_ARGUMENT |
| ?20? | ERROR_FEHLERANZAHL |
| ?70? | ERROR_NUMBER_ARGUMENT |
| ?71? | ERROR_RANGE_ARGUMENT |
| ?72? | ERROR_VERIFY |
| 0x?? | ERROR_ECU_UNKNOWN_STATUSBYTE |
LIEFERANTEN
Dimensions: 86 rows × 2 columns
| LIEF_NR | LIEF_TEXT |
|---|---|
| 0x01 | Reinshagen => Delphi |
| 0x02 | Kostal |
| 0x03 | Hella |
| 0x04 | Siemens |
| 0x05 | Eaton |
| 0x06 | UTA |
| 0x07 | Helbako |
| 0x08 | Bosch |
| 0x09 | Loewe => Lear |
| 0x10 | VDO |
| 0x11 | Valeo |
| 0x12 | MBB |
| 0x13 | Kammerer |
| 0x14 | SWF |
| 0x15 | Blaupunkt |
| 0x16 | Philips |
| 0x17 | Alpine |
| 0x18 | Continental Teves |
| 0x19 | Elektromatik Suedafrika |
| 0x20 | Becker |
| 0x21 | Preh |
| 0x22 | Alps |
| 0x23 | Motorola |
| 0x24 | Temic |
| 0x25 | Webasto |
| 0x26 | MotoMeter |
| 0x27 | Delphi PHI |
| 0x28 | DODUCO => BERU |
| 0x29 | DENSO |
| 0x30 | NEC |
| 0x31 | DASA |
| 0x32 | Pioneer |
| 0x33 | Jatco |
| 0x34 | Fuba |
| 0x35 | UK-NSI |
| 0x36 | AABG |
| 0x37 | Dunlop |
| 0x38 | Sachs |
| 0x39 | ITT |
| 0x40 | FTE |
| 0x41 | Megamos |
| 0x42 | TRW |
| 0x43 | Wabco |
| 0x44 | ISAD Electronic Systems |
| 0x45 | HEC (Hella Electronics Corporation) |
| 0x46 | Gemel |
| 0x47 | ZF |
| 0x48 | GMPT |
| 0x49 | Harman Kardon |
| 0x50 | Remes |
| 0x51 | ZF Lenksysteme |
| 0x52 | Magneti Marelli |
| 0x53 | Borg Instruments |
| 0x54 | GETRAG |
| 0x55 | BHTC (Behr Hella Thermocontrol) |
| 0x56 | Siemens VDO Automotive |
| 0x57 | Visteon |
| 0x58 | Autoliv |
| 0x59 | Haberl |
| 0x60 | Magna Steyr |
| 0x61 | Marquardt |
| 0x62 | AB-Elektronik |
| 0x63 | Siemens VDO Borg |
| 0x64 | Hirschmann Electronics |
| 0x65 | Hoerbiger Electronics |
| 0x66 | Thyssen Krupp Automotive Mechatronics |
| 0x67 | Gentex GmbH |
| 0x68 | Atena GmbH |
| 0x69 | Magna-Donelly |
| 0x70 | Koyo Steering Europe |
| 0x71 | NSI B.V |
| 0x72 | ASIN AWCO.LTD |
| 0x73 | Shorlock |
| 0x74 | Schrader |
| 0x75 | BERU Electronics GmbH |
| 0x76 | CEL |
| 0x77 | Audio Mobil |
| 0x78 | rd electronic |
| 0x79 | iSYS RTS GmbH |
| 0x80 | Westfalia Automotive GmbH |
| 0x81 | Tyco Electronics |
| 0x82 | Paragon AG |
| 0x83 | IEE S.A |
| 0x84 | TEMIC AUTOMOTIVE of NA |
| 0x85 | AKsys GmbH |
| 0xFF | unbekannter Hersteller |
ROVERPARTNUMPREFIX
Dimensions: 21 rows × 2 columns
| ROVER_NR | PREFIX |
|---|---|
| 0xA0 | AMR |
| 0xA1 | HHF |
| 0xA2 | JFC |
| 0xA3 | MKC |
| 0xA4 | SCB |
| 0xA5 | SRB |
| 0xA6 | XQC |
| 0xA7 | XQD |
| 0xA8 | XQE |
| 0xA9 | XVD |
| 0xAA | YAC |
| 0xAB | YDB |
| 0xAC | YFC |
| 0xAD | YUB |
| 0xAE | YWC |
| 0xAF | YWQ |
| 0xB0 | EGQ |
| 0xB1 | YIB |
| 0xB2 | YIC |
| 0xB3 | YIE |
| 0xXY | ??? |
DIGITALARGUMENT
Dimensions: 17 rows × 2 columns
| TEXT | WERT |
|---|---|
| ein | 1 |
| aus | 0 |
| ja | 1 |
| nein | 0 |
| auf | 1 |
| ab | 0 |
| an | 1 |
| yes | 1 |
| no | 0 |
| on | 1 |
| off | 0 |
| up | 1 |
| down | 0 |
| true | 1 |
| false | 0 |
| 1 | 1 |
| 0 | 0 |
JOBRESULTEXTENDED
Dimensions: 1 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0xXY | ERROR_UNKNOWN |
FDETAILSTRUKTUR
Dimensions: 3 rows × 2 columns
| NAME | TYP |
|---|---|
| F_UWB_ERW | nein |
| SAE_CODE | nein |
| F_HLZ | nein |
HDETAILSTRUKTUR
Dimensions: 7 rows × 2 columns
| NAME | TYP |
|---|---|
| F_ART_IND | nein |
| F_ART_ERW | nein |
| F_PCODE | nein |
| F_PCODE7 | nein |
| F_HFK | nein |
| F_LZ | nein |
| F_UWB_ERW | nein |
IDETAILSTRUKTUR
Dimensions: 7 rows × 2 columns
| NAME | TYP |
|---|---|
| F_ART_IND | nein |
| F_ART_ERW | nein |
| F_PCODE | nein |
| F_PCODE7 | nein |
| F_HFK | nein |
| F_LZ | nein |
| F_UWB_ERW | nein |
FORTTEXTE
Dimensions: 23 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0x069 | GPS antenna not connected |
| 0x06A | GPS hardware failure |
| 0x06B | GPS communication error |
| 0x06C | NAD fatal error |
| 0x06D | E-call switch not connected |
| 0x06E | E-call LED not connected |
| 0x070 | E-call switch shorted to 12V |
| 0x073 | NVM device error |
| 0x074 | E-call switch stuck or shorted to ground |
| 0x079 | Bluetooth interface error |
| 0x07A | Control unit in MTS mode |
| 0x07F | B-call switch shorted to 12V |
| 0x080 | B-call switch not connected |
| 0x081 | B-call switch stuck or shorted to ground |
| 0x091 | Main antenna or compensator/combiner disconnected or shortcut |
| 0x097 | Bluetooth cradle button stuck |
| 0x098 | Microphone disconnected |
| 0x068 | GPS antenna shortcut |
| 0x0A0 | Prefit SIM not physically present |
| 0x0A1 | Prefit SIM cannot be read |
| 0x0A2 | Prefit SIM PUK-locked; PIN input failed |
| 0x0A3 | Bluetooth antenna not connected |
| 0xXY | Undefined |
HORTTEXTE
Dimensions: 1 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0xFFFF | unbekannter Fehlerort |
IORTTEXTE
Dimensions: 11 rows × 2 columns
| ORT | ORTTEXT |
|---|---|
| 0x008 | Reset after software watchdog timeout |
| 0x011 | I-Bus access error |
| 0x012 | Low RF field detected |
| 0x013 | NVM corrupted |
| 0x014 | Coding data error |
| 0x015 | NAD transceiver failure |
| 0x01A | Prefit SIM not physically present |
| 0x01B | Prefit SIM cannot be read |
| 0x01C | Prefit SIM PUK-locked; PIN input failed |
| 0x01D | Prefit SIM denied in the network |
| 0xXY | Undefined |
FARTTEXTE
Dimensions: 3 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | Currently not available |
| 0x01 | Currently available |
| 0xXY | Undefined |
IARTTEXTE
Dimensions: 3 rows × 2 columns
| ARTNR | ARTTEXT |
|---|---|
| 0x00 | Currently not available |
| 0x01 | Currently available |
| 0xXY | Undefined |
BLUETOOTHANTENNASTATUSTEXTE
Dimensions: 3 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Passed |
| 0x01 | Failed |
| 0xXY | Undefined |
GPSSTATUSTEXTE
Dimensions: 14 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | No GPS |
| 0x01 | Communication error |
| 0x02 | Receiver error |
| 0x03 | No almanac |
| 0x04 | Searching satellites... |
| 0x05 | Tracking 1 satellite |
| 0x06 | Tracking 2 satellites |
| 0x07 | Tracking 3 satellites |
| 0x08 | Tracking 4 satellites |
| 0x09 | Trackiing 5 satellites |
| 0x0A | Tracking 6 satellites |
| 0x0B | 2D positioning |
| 0x0C | 3D positioning |
| 0xXY | Undefined |
NADSTATUSTEXTE
Dimensions: 3 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Not registered |
| 0x01 | Registered |
| 0xXY | Undefined |
PAIRINGRESULTTEXTE
Dimensions: 4 rows × 2 columns
| SB | STATUS_TEXT |
|---|---|
| 0x00 | Success |
| 0x01 | Failure |
| 0x02 | Waiting |
| 0xXY | Undefined |
TCUTYPETEXTE
Dimensions: 4 rows × 2 columns
| TCU_TYPE | TCU_TYPE_TEXT |
|---|---|
| 0x03 | TCU 1.5 Malapert I-Bus ECE |
| 0x04 | TCU 1.5 Malapert I-Bus US |
| 0x05 | TCU 1.5 Malapert I-Bus ECE Superthin |
| 0xXY | Undefined |
VOICERECLANGTEXTE
Dimensions: 8 rows × 2 columns
| WERT | LANGUAGE_TEXT |
|---|---|
| 0x00 | German |
| 0x01 | US English |
| 0x02 | UK English |
| 0x03 | Italien |
| 0x04 | French |
| 0x05 | Spanish |
| 0xFF | No language, flash programming failed |
| 0xXY | Undefined |
VOICERECPROGSTATUSTEXTE
Dimensions: 4 rows × 2 columns
| WERT | STATUS_TEXT |
|---|---|
| 0x00 | Flash programming successful |
| 0x01 | Flash programming ongoing |
| 0x02 | Flash programming failed |
| 0xXY | Undefined |
ROAMINGSTATUSTEXTE
Dimensions: 4 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Not roaming |
| 0x01 | Roaming on network |
| 0x02 | Roaming off network |
| 0xXY | Unknown or not detectable |
PRLSTATUSTEXTE
Dimensions: 10 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | PRL stored |
| 0x01 | PRL loading... |
| 0x02 | PRL packet size error |
| 0x03 | PRL sequence error |
| 0x04 | PRL invalid |
| 0x05 | PRL size error |
| 0x06 | PRL memory error |
| 0x07 | PRL not loaded |
| 0x08 | PRL disabled |
| 0xXY | Undefined |
RESULTTEXTE
Dimensions: 3 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Success |
| 0x01 | Error |
| 0xXY | Undefined |
HOMEONLYABSIDETEXTE
Dimensions: 5 rows × 2 columns
| WERT | ANZEIGE_TEXT |
|---|---|
| 0x00 | Normal |
| 0x01 | Home only enabled |
| 0x02 | Side A scanning |
| 0x03 | Side B scanning |
| 0xXY | Undefined |